QUICK START GUIDE – READ FIRST

2) Display Guide

ICE CREAM MAKER A B

1) Product Guide C

OUTER BOWL LID

One-Touch Programs
Locks paddle in place.
Each program is intelligently designed to whip up
delicious creations in 1 to 21/2 minutes. Programs
vary in length and speed depending on the
optimal settings to get perfectly creamy results
for that type of recipe.

When the program is running, the paddle

will move down through a frozen base
PADDLE
This dual functioning paddle finely and return back to the top to create
shaves and mixes frozen ingredients chef-approved treats. D
into the creamiest treats.

DESSERT TUBS
BPA-free tubs
and lids for making
BOWL and storing treats.
RELEASE E F
BUTTON

A Install Light D MIX-IN

Blinking light – Indicates the bowl Use after you've processed your dessert
is not properly installed. to mix-in extras like chocolate chips,
nuts or sweets.
Solid Light – Indicates the paddle
is not installed correctly.
E Power Button
B Progress Bar Use to turn unit on and off.
OUTER BOWL
Securely holds the tub in Indicates progress of the program
place during processing. selected. When a program is finished, F RE-SPIN
all 4 segments will flash twice and then
All accessories above are turn off. Useful if the base looks crumbly after
dishwasher safe on the top-rack. running a program. This can happen
if the base is really cold.
C Pre-set Programs Do not RE-SPIN if using MIX-IN.
Select the program that suits your recipe
This is NOT a blender. and the paddle will process the base to Refer to the recipe guide for more
create the ideal texture in 1 – 21/2 minutes. detailed information on each function.
Do NOT process a solid block of ice or ice cubes. Do NOT make a
smoothie or process hard, loose ingredients such as frozen fruit. When you're ready to get started refer to
the recipe guide for ideas of what you can
Fruit must be crushed to release its juice or combined with other make with each program.
ingredients and frozen before processing.
3) Assembly 4) Processing

Bowl Release
Button
To remove the
outer bowl, hold
release button.
1. 2. 3.
Plug in unit Install tub Install paddle 6. 7. 8.
Make sure to plug in Remove lid from tub Press and hold the paddle latch Choose program Remove bowl Remove lid
the unit before assembly and check that the on the top of the outer bowl
Select a program and When the program ends, Press the lid unlock
and switch Power on ingredients in the tub lid, then insert the paddle in
processing will begin. When hold the release button button and twist
The unit will NOT recognise have not been frozen the bottom of the lid. Release
complete, all 4 segments of on the left of the motor to remove lid.
the outer bowl and therefore at an angle. Place the latch to secure the paddle.
the progress bar will flash base and twist bowl handle
will not work if it is installed the tub containing Latch will be in the centre when
twice and then turn off. clockwise to remove.
before the unit is plugged in. the frozen base in the paddle is correctly installed.
the outer bowl.

NOTE
The paddle will feel loose Make sure to plug in the unit before assembly. If the programs do not illuminate
NOTE
when installed. Turn the lid when the power is turned on, make sure the unit is properly assembled. If the
upside down or give the install light is flashing, the outer bowl needs to be properly installed. If the install
paddle a spin to be sure light is steadily illuminated, the paddle needs to be properly installed.
it is secured.

5) Disassembly & Cleaning

Remove tub & paddle
Lift the tub out of the outer bowl.
Rinse the outer bowl lid to remove any
sticky residue or pieces wedged in the
paddle. Then remove the paddle by
pressing the paddle latch on top of the lid.

All parts are dishwasher safe on the

top-rack and can also be hand-washed.
4. 5.
Install lid Install outer bowl
Position the tab of the After plugging in the unit, place the
lid just slightly to the right outer bowl on the motor base with Now you’re ready!
of the outer bowl handle the handle in the middle of the unit. Choose a recipe from the Recipe Guide and keep this
so the lines on the lid and Twist handle to the right to raise the
Quick Start Guide nearby for reference.
handle align. Rotate the platform and lock the bowl in place.
lid clockwise to lock. You will hear a click when the
bowl is correctly installed. © 2021 SharkNinja Operating LLC.
NINJA is a registered trademark of SharkNinja Operating LLC.
NC300UK_QSG_MP_210526_Mv1