Bench Scale

DB-1H
OWNER’S MANUAL

CAS Bldg. # 440-1, Sungnae- Dong,

Kangdong- Gu Seoul Korea 9002-DBH-0033-2
2002. 3
CONTENTS
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
INSTALLATIONS 7
OPERATIONS 8
1. General Weighing 8
2. Weighing with Tare 9
ERROR MESSAGES 9
SPECIFICATIONS 10
SPECIFICATIONS FOR CE MARKED PRODUCT 11
 PRECAUTIONS

Make sure that you plug your scale into the proper power outlet.
Plug into a power outlet 30 minutes before operations.
If the scale is not properly
level, please adjust the 4 legs
at the bottom of the scale
(turn legs clockwise or
counterclockwise) so as to
center the bubble of the
leveling gauge inside the
indicated circle (See Fig.)

Place the scale on a flat and stable Do not subject the scale to sudden
Leveling gauge
surface. temperature changes.

Do not subject the platter to sudden This scale must be installed in a dry Keep the scale away from strong EMI noises may cause incorrect weight
shocks. and liquid free environment. readings.

4 5
 KEYBOARD
PREFACE
KEYS FUNCTIONS
Thank you for purchasing our CAS DB-1H series scale.
These series have been designed with CAS reliability, under rigid quality control Turn the displays on or off.
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
Used to correct the zero point.
We believe that your needs will be satisfied and you will have reliability.
This manual will help you with proper operation and care of the DB-1H series.
Please keep this handy for future reference. Used to enter a tare weight.
Used to clear a tare weight.

* No function key.
NAMES AND FUNCTIONS
OVERALL VIEW
INSTALLATIONS
DISPLAY
KEYBOARD 1. Insert the power line into the support. 2. Fix a ground wire with bolt then
HEAD
Fasten with bolts and nuts as fig 1. arrange the power line and loadcell
line as fig 2.

SUPPORT

Washer
Head
PLATTER Nut Power line
Power Ground wire
line Load cell
wire

Bushing
ADJUSTING BOLT LEVELING GAUGE

Ground wire
Bolt
DISPLAY
fig. 1 fig. 2

NET kg
Max 300kg Min 1kg e=d=50g

6 7
 3. Insert the support cover into the 4. Attach the head to the support. 2. Weighing with Tare
support as fig 3. Insert and fasten stop bolt as fig 4.
Tare is the weight of container being used for a commodity.
The key subtracts the weight of the container.

Support
cover NET NET NET

Place the container on the Press the key. Place the commodity in the
Support platter. container.
Stop bolt

NET NET NET

fig. 3 fig. 4

OPERATIONS Remove the commodity Remove the container from Press “ ” key.
from the platter. the platter, then you will
When you turn on the power switch, the scale will count “00000” to “99999”. see tare weight with “-”.
Then the scale will read “0.00” in the weight display. This is called the ZERO
state. If the scale is not ZERO state though there is nothing on the platter,
press the key.
The display indicates if the scale is at zero or if there is a tare entered into the ERROR MESSAGES
scale by way of a and NET lamps.
To help the customer’s understanding, this scale warns the user with proper error
message.
1. General Weighing Please refer to the table below.

Wait until the display becomes zero state. ERROR REASON SOLUTIONS
1.Make sure the platter is empty
Err 1 An error of the initial ZERO range
2.Make sure there is a platter on the scale
NET NET
Err 2 Failure of returning the normal mode Call your CAS dealer
Err 10 Failure of the analog module Call your CAS dealer

Err 11 Failure of the digital module Call your CAS dealer

Err 12 Condition codes are broken Call your CAS dealer
Place the commodity on Remove the commodity
the platter. from the platter.

8 9
 SPECIFICATIONS SPECIFICATIONS FOR CE MARKED PRODUCT
1. Symbol Description
MODEL DB-1H
CAPACITY 30kg 5/10g 60kg 10/20g 150kg 20/50g SYMBOL PUBLICATION DESCRIPTION
DISPLAY: Vacuum Fluorescent Display IEC 417. NO. 5032 ALTERNATING CURRENT
WEIGHT 5 DIGIT IEC 417. NO. 5019 PROTECTIVE CONDUCTOR TERMINAL
DISPLAY DESIGNATORS and NET
MAXIMUM TARE -30.00 kg -60.00 kg -99.95 kg 2. Electrical conditions for LVD (Low Voltage Directive) testing.
POWER SOURCE 110 /220V, 50/60Hz Power source: AC 220V ~ 240V 50Hz, 250mA, 10W
Insulation class:
POWER CONSUMPTION APPROX. 10 W
PLATTER SIZE (mm) 530(W) 406(D)
3. Environment Conditions for non-automatic weighing instrument.
PRODUCT SIZE (mm) 420(W) 635(D) 765(H) This product is intended to be “indoor use”.
Altitude: less 2000m
Notice: Specifications are subject to change for improvement Temperature range: 10°C 40°C
without notice. Maximum RH 80% (31°C), decreasing linearly to 50% RH at 40°C.
Supply voltage fluctuations: 10% of the normal voltage.
Installation category:
Pollution degree:

4. Capacity: 30kg 10g, 60kg 20g, 150kg 50g

5. How to connect the power supply

The power switch is located on the left side of the scale. Make sure that the
power switch is “OFF”.
Plug the scale into AC socket and make sure that the socket’s power is within
the scale’s operating range. Turn the power switch “ON”.

6. The socket-outlet shall be installed near the equipment and shall be easily
accessible.

7. Do not pour water directly on the scale. Use the plastic cleaner to clean your
scale.

8. Changes or modifications not expressly approved by manufacturer for

compliance could void the user’s authority to operate the equipment.

; Above statements can be applied to CE marked product.

10 11