Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

CRAFTSMAN CMCD710 Brushless Drill EN

Download as pdf or txt
Download as pdf or txt
You are on page 1of 23

Manuals+ — User Manuals Simplified.

CRAFTSMAN CMCD710 Brushless Drill Instruction Manual

Home » Craftsman » CRAFTSMAN CMCD710 Brushless Drill Instruction Manual

20V Max* 1/2″ (13 mm) Brushless Drill/Driver


INSTRUCTION MANUAL
CMCD710

Contents
1 Definitions: Safety Alert Symbols and Words
2 GENERAL POWER TOOL SAFETY
WARNINGS
3 BATTERIES AND CHARGERS
4 COMPONENTS
5 ASSEMBLY AND ADJUSTMENTS
6 OPERATION
7 MAINTENANCE
8 Documents / Resources
8.1 References
9 Related Posts

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.

(Used without word) Indicates a safety related message.


NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

COMPONENTS

1. Variable speed trigger switch


2. Forward/reverse button
3. Torque adjustment collar
4. Speed selector
5. LED work light
6. Keyless chuck
7. Battery
8. Battery release button
9. Main handle
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.

WARNING: Never modify the product or any part of it. Damage or personal injury could result.

WARNING: To reduce the risk of injury, read the instruction manual.


if you have any questions or comments about this or any product, call CRAFTsMAn toll free at: 1-888-331-4569.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated
(cordless) power tool.

1. Work Area Safety


a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b ) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2. Electrical Safety
a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces the risk of electric shock.
3. Personal Safety
a ) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
c ) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source
and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
d ) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e ) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
f ) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g ) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
h ) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool
safety principles. A careless action can cause severe injury within a fraction of a second.
4. Power Tool Use and Care
a ) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do
the job better and safer at the rate for which it was designed.
b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c ) Disconnect the plug from the power source and/ or remove the battery, pack if detachable, from the power
tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d ) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools and accesories. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f ) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
g ) Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
h ) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. Battery Tool Use and Care
a ) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another battery pack.
b ) Use power tools only with specifically designatedbattery packs. Use of any other battery packs may create
a risk of injury and fire.
c ) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails,
screws, or other small metal objects, that can make a connection from one terminal toanother. Shorting the
battery terminals together may cause burns or a fire.
d ) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
e ) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.”
f ) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above
265 °F (129 °C) may cause explosion.”
g ) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at temperatures outside the specified range may damage
the battery and increase the risk of fire.
6. Service
a ) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
b ) Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.

Drill Safety Warnings

Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Hold power tools by insulated gripping surfaces when performing an operation where the cutting accesory may
contact hidden wiring. Cutting accesory contacting with a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
Hold tool firmly with two hands, one hand on the handle, and the other gripping the bottom around the battery
area or the auxiliary handle if provided. Loss of control can cause personal injury.
Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the
work by hand or against your body leaves it unstable and may lead to loss of control.
Wear safety goggles or other eye protection. Hammering and drilling operations cause chips to fly. Flying
particles can cause permanent eye damage.
Bits, sockets and tools get hot during operation. Wear gloves when touching them.
Do not operate this tool for long periods of time. Vibration caused by tool action may be harmful to your hands
and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
Accessories and tool may get hot during operation. Wear gloves when handling them if performing heat
producing applications such as hammerdrilling and drilling metals.

Additional Safety Information

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

ANSI Z87.1 eye protection (CAN/CSA Z94.3),


ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:

lead from lead-based paints,


crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemicallytreated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction
activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/ or disperse dust, which may cause serious and permanent
respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust
exposure. Direct particles away from face and body.

WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during
use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or
falling hazard. Some tools will stand upright but may be easily knocked over.

Air vents often cover moving parts and should be avoided. Loose clothes, jewelry or long hair can be caught in
moving parts.

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V volts

Hz hertz

min minutes

or DC direct current

Class I Construction(grounded)

…/min per minute

BPM beats per minute

IPM impacts per minute

RPM revolutions perminute

sfpm surface feet per minute

SPM strokes per minute

OPM oscillations per minute

A amperes

W watts

alternating current
alternating or direct current

Class II Construction (double insulated)

no no load speed

n rated speed

earthing terminal

safety alert symbol

visible radiation

avoid staring at light

wear respiratory protection

wear eye protection

wear hearing protection

read all documentation

IPXX IP symbol

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton.


Before using the battery pack and charger, read the safety instructions below and then follow charging procedures
outlined. When ordering replacement battery packs, be sure to include the catalog number and voltage.
READ ALL INSTRUCTIONS
Important Safety Instructions for All Battery Packs

WARNING: Read all safety warnings, instructions, and cautionary markings for the battery pack, charger
and product. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Do not charge or use the battery pack in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Inserting or removing the battery pack from the charger may ignite the dust or fumes.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails,
screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
NEVER force the battery pack into the charger. DO NOT modify the battery pack in any way to fit into a non-
compatible charger as battery pack may rupture causing serious personal injury.
Charge the battery packs only in CRAFTSMAN chargers.
DO NOT splash or immerse in water or other liquids.
Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104 °F
(40 °C) (such as outside sheds or metal buildings in summer). For best life store battery packs in a cool, dry
location.
NOTE: Do not store the battery packs in a tool with the trigger switch locked on. Never tape the trigger switch
in the ON position.
Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack
can explode in a fire. Toxic fumes and materials are created when lithium-ion battery packs are burned.
If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery
liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical
attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium
salts.
Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek
medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

WARNING: Fire hazard. Never attempt to open the battery pack for any reason. If the battery pack case is
cracked or damaged, do not insert into the charger. Do not crush, drop or damage the battery pack. Do not use a
battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (e.g.,
pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to the service
center for recycling.
Storage Recommendations

1. The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged battery pack in a cool dry place out of the charger
for optimal results.

NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be
recharged before use.
Battery Pack Cleaning Instructions

1. Dirt and grease may be removed from the exterior of the battery using a cloth or soft non-metallic brush. Do not
use water or any cleaning solutions.

The RBRC® Seal


The RBRC® (Rechargeable Battery Recycling Corporation) Seal on the nickel cadmium,
nickel metal hydride or lithium-ion batteries (or battery packs) indicates that the costs to
recycle these batteries (or battery packs) at the end of their useful life have already been paid
by CRAFTSMAN. In some areas, it is illegal to place spent nickel cadmium, nickel metal
hydride or lithium-ion batteries in the trash or municipal solid waste stream and the Call 2
Recycle® program provides an environmentally conscious alternative.
Call 2 Recycle, Inc., in cooperation with CRAFTSMAN and other battery users, has
established the program in the United States and Canada to facilitate the collection of spent nickel cadmium,
nickel metal hydride or lithium-ion batteries. Help protect our environment and conserve natural resources by
returning the spent nickel cadmium, nickel metal hydride or lithium-ion batteries to an authorized service center or
to your local retailer for recycling. You may also contact your local recycling center for information on where to
drop off the spent battery.
RBRC® is a registered trademark of Call 2 Recycle, Inc.
Transportation
WARNING: Fire hazard. Do not store or carry the battery pack so that metal objects can contact exposed
battery terminals. For example, do not place the battery pack in aprons, pockets, tool boxes, product kit boxes,
drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery
terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like.
The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting
batteries in commerce or on airplanes in carry-on baggage UNLESS they are properly protected from short
circuits. So when transporting individual battery packs, make sure that the battery terminals are protected and well
insulated from materials that could contact them and cause a short circuit. NOTE: LI-ION batteries should not be
put in checked baggage.
Important Safety Instructions for All Battery Chargers

WARNING: Read all safety warnings, instructions, and cautionary markings for the battery pack, charger
and product. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

DO NOT attempt to charge the battery pack with any chargers other than a CRAFTSMAN charger.
CRAFTSMAN charger and battery pack are specifically designed to work together.
These chargers are not intended for any uses other than charging CRAFTSMAN rechargeable batteries. Any
other uses may result in risk of fire, electric shock or electrocution.
Do not expose the charger to rain or snow.
Pull by the plug rather than the cord when disconnecting the charger. This will reduce the risk of damage to the
electric plug and cord.
Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to
damage or stress.
Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in
risk of fire, electric shock or electrocution.
When operating a charger outdoors, always provide a dry location and use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the
gauge number of the wire, the greater the capacity of the cable, that is, 16 gauge has more capacity than 18
gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When
using more than one extension to make up the total length, be sure each individual extension contains at least
the minimum wire size. The following table shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier
the cord.

Minimum gauge for Cord sets


Volts Total length of Cord in Feet (meters)

120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)

240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)

Ampere Rating
American Wire gauge
MoreThan not More Than

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommended

Do not place any object on top of the charger or place the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat
source. The charger is ventilated through slots in the top and the bottom of the housing.
Do not operate the charger with a damaged cord or plug–have them replaced immediately.
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way.
Take it to an authorized service center.
Do not disassemble the charger; take it to an authorized service center when service or repair is required.
Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric
shock. Removing the battery pack will not reducethis risk.
NEVER attempt to connect 2 chargers together.
The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on
any other voltage. This does not apply to the vehicular charger.

WARNING: Shock hazard. Do not allow any liquid to get inside the charger. Electric shock may result.

WARNING: Burn hazard. Do not submerge the battery pack in any liquid or allow any liquid to enter the
battery pack. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack
breaks or cracks, return to a service center for recycling.

CAUTION: Burn hazard. To reduce the risk of injury, charge only CRAFTSMAN rechargeable battery packs.
Other types of batteries may overheat and burst resulting in personal injury and property damage.

CAUTION: Under certain conditions, with the charger plugged into the power supply, the charger can be
shorted by foreign material. Foreign materials of a conductive nature, such as, but not limited to, grinding dust,
metal chips, steel wool, aluminum foil or any buildup of metallic particles should be kept away from the charger
cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug the
charger before attempting to clean.

Charging a Battery

NOTE: To ensure maximum performance and life of lithiumion battery packs, charge the battery pack fully before
first use.
1. Plug the charger into an appropriate outlet before inserting battery pack.
2. Connect the charger and battery pack, making sure the battery is fully seated. The (charging) light will blink
continuously indicating that the charging process has started.
3. The completion of charge will be indicated by the light remaining ON continuously. The battery pack is fully
charged and may be removed and used at this time or left in the charger.

NOTE: To remove the battery pack, some chargers require the battery pack release button to be pressed.
Indicators

Charging

Fully Charged

Hot/Cold Pack Delay

A charger will not charge a faulty battery pack. The charger refusing to light could indicate a problem with the
charger.
NOTE: If the charger refuses to light, take the charger and battery pack to be tested at an authorized service
center.
Hot/Cold Pack Delay
When the charger detects a battery pack that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay,
suspending charging until the battery pack has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures maximum battery pack life.
A cold battery pack may charge at a slower rate than a warm battery pack.
Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged when the air temperature is
between 65 °F – 75 °F (18 ° – 24 °C). DO NOT charge when the battery pack is below +40 °F (+4.5 °C), or
above +104 °F (+40 °C). This is important and will prevent serious damage to the battery pack.
2. The charger and battery pack may become warm to the touch while charging. This is a normal condition, and
does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or
battery pack in a warm environment such as in a metal shed or an uninsulated trailer.
3. If the battery pack does not charge properly:
a. Check operation of receptacle by plugging in a lamp or other appliance;
b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights;
c. Move the charger and battery pack to a location where the surrounding air temperature is approximately 65
°F – 75 °F (18 ° – 24 °C);
d. If charging problems persist, take the tool, battery pack and charger to your local service center.
4. The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done
previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also
charge a partially used pack whenever you desire with no adverse effect on the battery pack.
5. Foreign materials of a conductive nature such as, but not limited to, grinding dust, metal chips, steel wool,
aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the
charger from the power supply when there is no battery pack in the cavity. Unplug the charger before
attempting to clean.
6. Do not freeze or immerse the charger in water or any other liquid.

Charger Cleaning Instructions

WARNING: Shock hazard. Disconnect the charger from the AC outlet before cleaning. Dirt and grease may
be removed from the exterior of the charger using a cloth or soft non-metallic brush. Do not use water or any
cleaning solutions.
These chargers are designed to be wall mountable or to sit upright on a table or work surface. If wall mounting,
locate the charger within reach of an electrical outlet, and away from a corner or other obstructions which may
impede air flow. Use the back of the charger as a template for the location of the mounting screws on the wall.
Mount the charger securely using drywall screws (purchased separately) at least 1″ (25.4 mm) long, with a screw
head diameter of 0.28–0.35″ (7–9 mm), screwed into wood to an optimal depth leaving approximately 7/32″ (5.5
mm) of the screw exposed. Align the slots on the back of the charger with the exposed screws and fully engage
them in the slots.
Versatrack
CRAFTSMAN chargers can be mounted to the wall using CRAFTSMAN Versatrack Trackwall. Hooks and
accessories are sold separately. Please refer to the Versatrack Trackwall accessory sheet for further information.
SAVE THESE INSTRUCTIONS FOR FUTURE USE

COMPONENTS

(FIG. A)
Intended Use
This drill/driver is designed for professional use.
DO nOT use under wet conditions or in presence of flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this tool.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before
making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause
injury.
Torque Adjustment Collar (Fig. A)
Your tool has an adjustable torque screwdriver mechanism for driving and removing a wide array of fastener
shapes and sizes. Circling the torque adjustment 3 are numbers, and a drill bit symbol. These numbers are used
to set the clutch to deliver a torque range. The higher the number on the collar, the higher the torque and the
larger the fastener which can be driven. To select any of the numbers, rotate until the desired number aligns with
the arrow.
NOTE: The torque adjustment collar is only engaged during screwdriving mode and not in drill mode.

OPERATION

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before
making any adjustments or removing/ installing attachments or accessories. An accidental start-up can
cause injury.
Installing and Removing the Battery Pack (Fig. B)
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack 7 into the tool handle, align the battery pack with the rails inside the tool’s handle and
slide it into the handle until the battery pack is firmly seated in the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release button 8 and firmly pull the battery pack out of the
tool handle. Insert it into the charger as described in the charger section of this manual.

Proper Hand Position (Fig. C)

WARNING: To reduce the risk of serious personal injury,ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main handle 9 and one hand on the back of the battery.
Trigger Switch and Forward/Reverse Button (Fig. D)

The drill is turned ON and OFF by pulling and releasing the trigger switch 1 . The farther the trigger is
depressed, the higher the speed of the drill.
A forward/reverse control button 2 determines the rotational direction of the tool and also serves as a lock off
button.
To select forward rotation, release the trigger switch and depress the forward/reverse control button on the
right side of the tool.
To select reverse, depress the forward/reverse control button on the left side of the tool.
The center position of the control button locks the tool in the off position. When changing the position of the
control button, be sure the trigger is released
Speed Selector (Fig. E, F)
The speed selector feature of your drill allows you to shift gears for greater versatility.

To select low speed, high torque setting (position 1), turn tool off and permit to stop. Slide speed selector 4
away from the chuck.
To select the high speed, low torque setting (position 2), turn tool off and permit to stop. Slide speed selector
back toward the chuck.

NOTE: Do not change gears when tool is running. If you are having trouble changing gears, make sure that the
speed selector is either completely pushed forward or completely pushed back.
Keyless Chuck (Fig. G–I)

WARNING: Make certain the battery pack is removed to prevent tool actuation before installing or removing
accessories.
To insert a drill bit or other accessory:

1. Grasp the keyless chuck 6 and rotate it in the counterclockwise direction, as viewed from the chuck end.
2. Insert the bit or other accessory fully into the chuck, and tighten securely by rotating the chuck in the clockwise
direction as viewed from the chuck end.

WARNING: Do not attempt to tighten or loosen drill bits (or any other accessory) by gripping the front part of
the chuck and turning the tool on. Damage to the chuck and personal injury may occur when
changing accessories.
LED Work Light (Fig. A)

WARNING: Do not place the light in a position which may cause anyone to intentionally or unintentionally
stare into the light. Serious eye injury could result.
There is an LED worklight 5 located above the trigger switch 1. The worklight is activated when the trigger switch
is depressed, and will automatically turn off approximately 20 seconds after the trigger switch is released. If the
trigger switch remains depressed, the worklight will remain on.
NOTE: The worklight is for lighting the immediate work surface and is not intended to be used as a flashlight.
Drilling (Fig. J)
NOTICE: If drilling thin material, use a wood “backup” block to prevent damage to the material.

WARNING: Drill may stall if overloaded causing a sudden twist. Always expect the stall. Grip the drill firmly
to control the twisting action and avoid injury.

Select the desired speed/torque range using the speed selector 4 to match the speed and torque to the
planned operation. Turn the collar 3 to the drill symbol.
NOTE: If drilling thin material, use a wood “backup” block to prevent damage to the material
Use sharp drill bits only.
Support and secure work properly, as instructed in the General Power Tool Safety Warnings.
Use appropriate and required safety equipment, as instructed in the General Power Tool Safety Warnings.
Secure and maintain work area, as instructed in the General Power Tool Safety Warnings.
Run the drill very slowly, using light pressure, until the hole is started enough to keep the drill bit from slipping
out of it.
Apply pressure in a straight line with the bit. Use enough pressure to keep the bit biting but not so much as to
stall the motor or deflect the bit.
Hold the drill firmly with two hands, one hand on the handle, and the other gripping the bottom around the
battery area or the auxillary handle if provided.
DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO START IT.
DAMAGE TO THE DRILL CAN RESULT.
Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.
Keep the motor running while pulling the bit out of a drilled hole. This will help reducejamming.
Make sure switch turns drill on and off.

Drilling in Wood
Holes in wood can be made with the same twist drill bits used for metal or with spade bits. These bits should be
sharp and should be pulled out frequently when drilling to clear chips from the flutes.
Drilling in Metal
Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry.
The cutting lubricants that work best are sulfurized cutting oil or lard oil.
Drilling in Masonry
Use carbide tipped masonry bits. Refer to Drilling section. Keep even force on the drill but not so much that you
crack the brittle material. A smooth, even flow of dust indicates the proper drilling rate.

Screwdriving (Fig. K)

1. Select the desired speed/torque range using the gear shifter to match the speed and torque to the planned
operation.
2. Turn the torque adjustment collar 3 to the desired position.
NOTE: Use the lowest torque setting required to seat the fastener at the desired depth. The lower the number,
the lower the torque output.
3. Insert the desired fastener accessory into the chuck as you would any drill bit.
4. Make some practice runs in scrap or on unseen areas of the workpiece to determine the proper position of the
torque adjustment collar.
5. Always start with lower torque settings, then advance to higher torque settings to avoid damage to the
workpiece or fastener.

MAXIMUM RECOMMENDED CAPACITIES

CMCD710

Wood 1″ (25 mm)

steel 1/2″ (13 mm)

MAINTENANCE

WARNING: To reduce the risk of serious personal injury, turn unit off andremove the battery packbefore
making any adjustments or removing/installing attachments or accessories. An accidental start-up can
cause injury.
Accessories

WARNING: Since accessories, other than those offered by CRAFTSMAN, have not been tested with this
product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only CRAFTSMAN
recommended accessories should be used with this product.
Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any accessory, please contact CRAFTSMAN, call 1-888-331-
4569.
Versatrack™ (Fig. L)

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before
making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause
injury.

WARNING: To reduce the risk of serious personal injury, do not use a damaged Versatrack™ hang hook or
Versatrack™ Trackwall. A damaged Versatrack™ hang hook or Versatrack™ Trackwall will not support the weight
of the tool.

WARNING: To reduce the risk of serious personal injury, ensure the screw holding the Versatrack™ hang
hook is securely tightened.

WARNING: To reduce the risk of serious personal injury, DO NOT suspend tool overhead or suspend
objects from the hang hook. ONLY suspend tool on the Versatrack™ Trackwall using the hang hook.

WARNING: Ensure that the tool weight does not exceed the maximum rated weight for the selected
Versatrack™ hook.

WARNING: When hanging objects on a Versatrack™ Trackwall rail, adequately space the tools in order to
not exceed 75 lb (35 kg) per linear foot.
IMPORTAnT: When attaching the Versatrack™ hang hook, use only the screw that is provided. Be sure to
securely tighten the screw. Versatrack™ accessories mount compatible tools securely to the Versatrack™
Trackwall system.

1. Turn tool off, remove the battery pack and remove accessories.

CAUTION: Any product with exposed cutting teeth must have them covered securely if it is to be on the
Versatrack™ Trackwall.
2. Attach the hang hook 10 on the tool.
a. Place the Versatrack™ hang hook onto the mounting location at the base of the tool.
b. Use a screwdriver to secure the hang hook with the provided screw . Do not use any other screw for this.

NOTE: Versatrack™ accessories for use with your tool are available at extra cost from your local dealer or
authorized service center. If you need assistance in locating any accessory, please contact CRAFTSMAN, call 1-
888-331-4569.

Belt Hook (Fig. L)


Optional Accessory

WARNING: To reduce the risk of serious personal injury, place the forward/reverse button in the lock-off
position or turn tool off and disconnect battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.

WARNING: To reduce the risk of serious personal injury, ONLY use the tool’s belt hook to hang the tool from
a work belt. DO NOT use the belt hook for tethering or securing the tool to a person or object during use. DO NOT
suspend tool overhead or suspend objects from the belt hook.

WARNING: To reduce the risk of serious personal injury, ensure the screw holding the belt hook is secure.
IMPORTAnT: When attaching or replacing the belt hook, use only the screw 11 that is provided. Be sure to
securely tighten the screw.
The belt hook can be be attached to either side of the tool using only the screw 11 provided, to accommodate
left- or right- handed users. If the hook is not desired at all, it can be removed from the tool.
To move the belt hook, remove the screw that holds the belt hook in place then reassemble on the opposite side.
Be sure to securely tighten the screw.
Cleaning

WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the
risk of eye injury, always wear ANSI Z87.1 approved eye protection when performing this.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool.
These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water
and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
Repairs
The charger and battery pack are not serviceable. There are no serviceable parts inside the charger or battery
pack.

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including
brush inspection and replacement, when applicable) should be performed by a CRAFTSMAN factory service
center or a CRAFTSMAN authorized service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:

WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case
there is a problem with your product.
CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer Safety Act.

Register online at www.craftsman.com/registration


Three Year Limited Warranty
CRAFTSMAN will repair or replace, without charge, any defects due to faulty materials or workmanship for three
years from the date of purchase (two years for batteries). This warranty does not cover part failure due to normal
wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit
www.craftsman.com or call 1-888-331-4569. This warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL
OTHERS, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states
do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damages, so these limitations may not apply to you. This warranty gives you specific legal rights
and you may have other rights which vary in certain states or provinces.
2 YEARS FREE SERVICE ON CRAFTSMAN BATTERY PACKN
CMCB201, CMCB2011
3 YEARS FREE SERVICE ON CRAFTSMAN BATTERY PACKN
CMCB202, CMCB204
NOTE: Battery warranty voided if the battery pack is tampered with in any way. CRAFTSMAN is not responsible
for any injury caused by tampering and may prosecute warranty fraud to the fullest extent permitted by law.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your CRAFTSMAN Power Tool or Nailer for any
reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions
asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin
America, see country specific warranty information contained in the packaging, call the local company or see
website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-888-
331-4569 for a free replacement.

CRAFTSMAN BATTERY AND CHARGER SYSTEMS


Chargers

Charger
Battery Cat # Output Voltage
CMCB100 CMCB102 CMCB104

CMCB201 20 C C C

CMCB2011 20 C C C

CMCB202 20 C C C

CMCB204 20 C C C

“C” Indicates that the battery pack is compatible with that specific charger. Read the instruction manual for more
specific information.
* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.

1-888-331-4569
WWW.CRAFTSMAN.COM
CRAFTSMAN, 701 East Joppa Road, Towson, MD 21286
Copyright © 2018
Part No. N638037

Documents / Resources

CRAFTSMAN CMCD710 Brushless Drill [pdf] Instruction Manual


CMCD710 Brushless Drill, CMCD710, Brushless Drill, Drill
References

Home | CRAFTSMAN

Manuals+,

You might also like