Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    WL 2.1kpa (10 8)

    Uploaded by

    muralidharan10901
    This document contains the results of a structural analysis of a glass balustrade. It details the geometry, materials, loads, and calculation approaches used. The results show the maximum displacement is 21.18 mm which is less than the allowable 30 mm. The maximum stresses in layers 3 and 1 are 32.17 MPa and 48.04 MPa respectively, which are less than the allowable 73 MPa, indicating the design is structurally safe.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WL 2.1kpa (10 8)

    Uploaded by

    muralidharan10901
    6 views6 pages
    This document contains the results of a structural analysis of a glass balustrade. It details the geometry, materials, loads, and calculation approaches used. The results show the maximum displacement is 21.18 mm which is less than the allowable 30 mm. The maximum stresses in layers 3 and 1 are 32.17 MPa and 48.04 MPa respectively, which are less than the allowable 73 MPa, indicating the design is structurally safe.

    Original Title

    WL-2.1kPa(10-8)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the results of a structural analysis of a glass balustrade. It details the geometry, materials, loads, and calculation approaches used. The results show the maximum displacement is 21.18 mm which is less than the allowable 30 mm. The maximum stresses in layers 3 and 1 are 32.17 MPa and 48.04 MPa respectively, which are less than the allowable 73 MPa, indicating the design is structurally safe.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views6 pages

    WL 2.1kpa (10 8)

    Uploaded by

    muralidharan10901
    This document contains the results of a structural analysis of a glass balustrade. It details the geometry, materials, loads, and calculation approaches used. The results show the maximum displacement is 21.18 mm which is less than the allowable 30 mm. The maximum stresses in layers 3 and 1 are 32.17 MPa and 48.04 MPa respectively, which are less than the allowable 73 MPa, indicating the design is structurally safe.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Project: JLTTOWER BALUSTRADE - WL-2.

    1kPa 21-03-2024 Page: 1

    SJ MEPLA Calculation protocol:

    Geometry:

    Basic form: quadrangle


    Corner x y
    mm mm
    1 0.00 0.00
    2 1800.00 0.00
    3 1800.00 1200.00
    4 0.00 1200.00

    Supports:

    Edge supports:
    from-to kind of supports
    1 2 w,phi,theta : fixed - u,v : free (simply supported and clamped)

    Spring supports:
    ----- position ---- ------------ rigidity ---------
    Package layer x y z Cx Cy Cz
    mm mm mm N/mm N/mm N/mm
    1 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
    1 1 1800.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000

    Layers:

    This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
    Project: JLTTOWER BALUSTRADE - WL-2.1kPa 21-03-2024 Page: 2

    Mechanical properties:
    Package layer e-mod. poiss thickn. density alpha t dT prestressing
    N/mm² - mm kg/m³ 1/K K N/mm²
    1 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 88.00
    1 2 78.00 0.50 2.28 1070.00 8.0000e-005 0.00 0.00
    1 1 70000.00 0.23 10.00 2550.00 1.0000e-005 0.00 88.00

    Loads:

    Face loads:
    (constant distributed):
    Package pressure
    N/mm²
    1 2.10000e-003

    Dead weight:
    Direction vector of gravity acceleration [9.81 m/s²]:
    Vx Vy Vz
    0.00000 -1.00000 0.00000

    Calculation approaches:

    small deflections, linear


    static calculation

    This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
    Project: JLTTOWER BALUSTRADE - WL-2.1kPa 21-03-2024 Page: 3

    Calculation results:

    Minimum and maximum displacements (at nodes):


    - position- displacement
    Package x y w
    mm mm mm
    1 0.00 0.00 0.00 (min)
    900.00 1200.00 21.18 (max)

    Max principal stress (in gaussian points):


    Package layer x y stress
    mm mm N/mm²
    1 3 920.29 22.54 32.17
    1 1 879.71 22.54 48.04

    Springs: (order as defined above)


    Package layer u v w Fx Fy Fz
    mm mm mm N N N
    1 1 -0.00 -512.15 0.00 -0.00 -512.15 0.00
    1 1 -0.00 -512.15 0.00 0.00 -512.15 0.00

    This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
    Max. Displacement Contour

    Allowable deflection of Glass Balustrade = L/30 or 30mm Max as per Table 7.1 of AS1288:2006

    = 1200/30 = 40mm or 30mm whichever is less

    = 30mm > 21.18mm. Hence Safe


    Max. Stress Contour-Layer 3

    From the above, the maximum stress is 32.17 MPa <73 MPa. Hence Safe
    Max. Stress Contour-Layer 1

    From the above, the maximum stress is 48.04 MPa <73 MPa. Hence Safe

    You might also like