Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    17.52mm glass-LL0.74kN Per M

    Uploaded by

    muralidharan10901
    This document contains the results of a structural analysis of a balustrade using the SJ MEPLA software. It details the geometry, materials, loads, and results of the analysis including maximum displacements, stresses, and reactions which are all within acceptable limits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    17.52mm glass-LL0.74kN Per M

    Uploaded by

    muralidharan10901
    10 views3 pages
    This document contains the results of a structural analysis of a balustrade using the SJ MEPLA software. It details the geometry, materials, loads, and results of the analysis including maximum displacements, stresses, and reactions which are all within acceptable limits.

    Original Title

    17.52mm glass-LL0.74kN per M

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the results of a structural analysis of a balustrade using the SJ MEPLA software. It details the geometry, materials, loads, and results of the analysis including maximum displacements, stresses, and reactions which are all within acceptable limits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views3 pages

    17.52mm glass-LL0.74kN Per M

    Uploaded by

    muralidharan10901
    This document contains the results of a structural analysis of a balustrade using the SJ MEPLA software. It details the geometry, materials, loads, and results of the analysis including maximum displacements, stresses, and reactions which are all within acceptable limits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Project: 1844-3 Balustrade 17.52mm -LL0.

    74kNperm 5/3/2023 Page: 1

    SJ MEPLA Calculation protocol:

    Geometry:

    Basic form: quadrangle


    Corner x y
    mm mm
    1 0.00 0.00
    2 1500.00 0.00
    3 1500.00 1200.00
    4 0.00 1200.00

    Supports:

    Edge supports:
    from-to kind of supports
    1 2 w,u,v,phi,theta: fixed (all d.o.f supported and clamped)

    Spring supports:
    ----- position ---- ------------ rigidity ---------
    Package layer x y z Cx Cy Cz
    mm mm mm N/mm N/mm N/mm
    1 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
    1 1 1500.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000

    Layers:

    This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
    Project: 1844-3 Balustrade 17.52mm -LL0.74kNperm 5/3/2023 Page: 2

    Mechanical properties:
    Package layer e-mod. poiss thickn. density alpha t dT prestressing
    N/mm² - mm kg/m³ 1/K K N/mm²
    1 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 88.00
    1 2 1.80 0.48 1.52 1070.00 8.0000e-005 0.00 0.00
    1 1 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 88.00

    Loads:

    Line loads:
    Package -- from -- --- to --- qx qy qz
    x y x y N/mm N/mm N/mm
    1 0.00 1100.00 1500.00 1100.00 0.00 0.00 0.74

    Face loads:
    (constant distributed):
    Package pressure
    N/mm²
    1 0.00000e+000

    Dead weight:
    Direction vector of gravity acceleration [9.81 m/s²]:
    Vx Vy Vz
    0.00000 -1.00000 0.00000

    Calculation approaches:

    large deflections, non-linear, (transversal to pane plane)


    static calculation
    This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
    Project: 1844-3 Balustrade 17.52mm -LL0.74kNperm 5/3/2023 Page: 3

    Calculation results:

    Minimum and maximum displacements (at nodes):


    - position- displacement
    Package x y w
    mm mm mm
    1 0.00 0.00 0.00 (min) < Span/30 = 1200/30 = 40mm or 30mm,
    750.00 1200.00 21.56 (max) whichever is less,
    Hence OK
    Max principal stress (in gaussian points):
    Package layer x y stress
    mm mm N/mm² < 73MPa or ultimate stress of FT glass/4.0
    1 3 433.09 16.91 11.78 (165/4.0 = 41.25 Mpa) whichever is less,
    1 1 766.91 16.91 23.21 Hence OK

    Max. Equivalent Von Mises stress (in gaussian points):


    Package layer x y stress
    mm mm N/mm²
    1 3 766.91 16.91 21.23
    1 1 766.91 16.91 21.06

    Springs: (order as defined above)


    Package layer u v w Fx Fy Fz
    mm mm mm N N N
    1 1 0.00 0.00 -0.00 0.00 0.00 0.00
    1 1 0.00 0.00 0.00 0.00 0.00 0.00

    This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.

    You might also like