The Official Ministry of Transportation (MTO) Driver's Handbook - Ontario - Ca

12/02/2024, 13:40 The Official Ministry of Transportation (MTO) Driver’s Handbook | ontario.
ca
The Official Ministry of Transportation

(MTO) Driver’s Handbook
The online version of the Ontario’s driver’s handbook. Use this book to study for your G1
driver’s licence, test your knowledge (https://www.ontario.ca/document/official-mto-drivers-
handbook/test-yourself-sample-knowledge-test-questions) , and prepare for your Level 2 road
test (https://www.ontario.ca/document/official-mto-drivers-handbook/level-two-road-test) .
This handbook is only a guide. For official purposes, please refer to the Highway Traffic Act
(https://www.ontario.ca/laws/statute/90h08) , the Motorized Snow Vehicles Act
(https://www.ontario.ca/laws/statute/90m44) and the Off-Road Vehicles Act
(https://www.ontario.ca/laws/statute/90o04) of Ontario.
If you're taking beginner driver education, make sure it’s from a ministry-approved school
(http://www.mto.gov.on.ca/english/driver/driving-schools.shtml) .
For more information about driver licensing, visit Ministry of Transportation

(https://www.ontario.ca/page/drivers-licence) .
To request a copy of this book in an alternate format, contact Publications Ontario at

1-800-668-9938 or 416-326-5300 or visit ServiceOntario Publications
(http://www.publications.serviceontario.ca) .
Disponible en français. Demandez le « Guide officiel de l'automobiliste de publié par le

MTO »
Driving is a privilege - not a right
Introduction
Ontario is a road safety leader in Canada and North America. The Ministry of
Transportation has introduced a range of measures to maintain this record and to
improve the behaviour of all drivers.
https://www.ontario.ca/document/official-mto-drivers-handbook# 1/231
12/02/2024, 13:40 The Official Ministry of Transportation (MTO) Driver’s Handbook | ontario.ca
Most collisions are caused by driver error or behaviours such as following too closely,
speeding, failure to yield the right of way, improper turns, running red lights and
frequently changing lanes. There are also drivers who intentionally put others at risk
through such reckless behaviour. Statistics show that new drivers of all ages are far more
likely than experienced drivers to be involved in serious or fatal collisions.
Provincial campaigns promoting the correct use of seatbelts and child car seats, and
informing people about drinking and driving and aggressive driving, are making a
difference. Ontario’s Graduated Licensing System (GLS), which lets new drivers gain skills
and experience in low-risk environments, is also helping to develop better, safer drivers.
This handbook gives new drivers the basic information they need about learning to drive
in Ontario: the rules of the road, safe driving practices and how to get a licence to drive a
car, van or small truck. The ministry recommends that all drivers would benefit from
taking an advanced course in driver training.
As you read, remember that this handbook is only a guide. For official descriptions of the
laws, look in the Highway Traffic Act of Ontario and its Regulations
(https://www.ontario.ca/laws/statute/90h08) . Information on how to get licences to drive other
types of vehicles is available in Part Two of this handbook, the Official MTO Motorcycle
Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Motorcycle) , the
Official MTO Truck Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Truck) , the Official
MTO Bus Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Bus) and the Official
MTO Air Brake Handbook.
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Airbrake)
Drive safely.
Getting Your Driver’s Licence

This chapter tells you what licence you need to drive in Ontario and how to get it,
whether you are a new driver, a visitor or a new resident in Ontario.
If you are applying for your first licence, this chapter explains the graduated licensing
system, how to apply for a licence, the tests you will have to pass and the driving
privileges you will have at each licence level.
Requirements for driving in Ontario
Residents of Ontario must be at least 16 years old and have a valid Ontario driver’s
licence to drive in this province.
Visitors to Ontario who want to drive while here must be at least 16 years old and have a
valid driver’s licence from your own province, state or country. If you are visiting Ontario
for more than three months, you need an International Driver’s Permit from your own
country.
New residents to Ontario with a valid driver’s licence from another province, state or
country can use it for 60 days after you move to Ontario.
If you become a permanent resident of Ontario, you must get an Ontario driver’s licence.
Driver’s Licence Classification Chart
Class A
Allowed to drive any tractor–trailer combination

May also drive in class D and G
Diagram 1-1a-1
Class B
Allowed to drive any school purposes bus

May also drive in class C, D, E, F and G
Diagram 1-1a-2
Class C
Allowed to drive any regular bus

May also drive vehicles in class D, F and G.
Diagram 1-1a-3
Class D
A motor vehicle exceeding 11,000 kilograms gross weight or registered gross weight or
any truck or combination provided the towed vehicle is not over 4,600 kilograms
May also drive in class G
Diagram 1-1a-4
Class E
Allowed to drive any school purposes bus - maximum of 24-passenger capacity

May also drive in class F and G
Diagram 1-1a-5
Class F
Allowed to drive any regular bus - maximum of 24-passenger capacity - and ambulances
May also drive in class G
Diagram 1-1a-6
Class G
Allowed to drive any car, van or small truck or combination of vehicle and towed vehicle
up to 11,000 kilograms provided the vehicle towed is not over 4,600 kilograms. A pickup
truck towing a house trailer exceeds 4,600 kilograms, but the total combined weight of
the truck and trailer does not exceed 11,000 kilograms is deemed a Class G vehicle.
Diagram 1-1b-1
Class G1
Level One of graduated licensing. Holders may drive Class G vehicles with an
accompanying fully licensed driver with at least four years driving experience. Subject to
certain conditions.
Class G2
Level Two of graduated licensing. Holders may drive Class G vehicles without
accompanying driver but are subject to certain conditions.
Class M
Allowed to drive any motorcycles, including motor tricycles, limited-speed motorcycles

(motor scooters) and motor-assisted bicycles (mopeds). Holders may also drive a Class G
vehicle under the conditions that apply to a Class G1 licence holder.
Diagram 1-1b-2
Class M1
Level One of graduated licensing for motorcycles, including motor tricycles, limited-speed
motorcycles (motor scooters) and motor-assisted bicycles (mopeds). Holders may drive a
motorcycle under certain conditions.
Class M2
Level Two of graduated licensing for motorcycles, including motor tricycles, limited-speed
motorcycles (motor scooters) and motor-assisted bicycles (mopeds). Holders may drive a
motorcycle but only with a zero blood alcohol level. Holders may also drive a Class G
vehicle under the conditions that apply to a Class G1 licence holder.
Class M with L condition
Holders may operate a limited-speed motorcycle or moped only.
Class M2 with L condition
Holders may operate a limited-speed motorcycle or moped only.
Diagram 1-1b-3
Class M with M condition
Holders may operate a motor tricycle only.
Class M2 with M condition
Holders may operate a motor tricycle only.
Diagram 1-1b-4
Note: A "Z" air brake endorsement is required on a driver’s licence to operate any air
brake equipped motor vehicle.
What kind of licence?
In Ontario, there are 12 different classes of licences. Each one qualifies you to drive a
different type of vehicle. The class of licence you have must match the type of vehicle you
are driving. You need a Class G licence to drive a car, van or small truck. You must have a
Class G licence before you can be licensed to drive any other type of vehicle. The only
exception is motorcycles. You may get a motorcycle licence (Class M) without first getting
a Class G licence. The Driver’s Licence Classification Chart shows you what class of licence
you need to drive different vehicles.
For information on the skills and knowledge you'll need to get a Class M motorcycle
licence, study the Official MTO Motorcycle Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Motorcycle) . You can
get information on other kinds of licences - classes A, B, C, D, E and F - in the Official MTO
Truck Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Truck) and the Official
MTO Bus Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Bus) . If you want to
drive a vehicle equipped with air brakes, the Official MTO Air Brake Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Airbrake) tells you
how to qualify.
Some recreational vehicles have special licence requirements. If you plan to drive an off-
road vehicle or snowmobile, read the Off-Road Vehicles section in this handbook.
You do not need a licence to ride a bicycle in Ontario; however bicycles are defined as
vehicles in the Highway Traffic Act and bicyclists have rights and responsibilities similar to
other vehicle operators under the Act. Information on safe cycling can be found in the
Ministry of Transportation publications Cycling Skills and the Young Cyclist Guide.
Graduated licensing
New drivers applying for their first car or motorcycle licence enter Ontario’s graduated
licensing system. Graduated licensing lets new drivers get driving experience and skills
gradually. The two-step licensing process takes at least 20 months to complete.
To apply for a licence, you must be at least 16 years old, pass a vision test and pass a test
of your knowledge of the rules of the road and traffic signs. After you pass these tests,
you will enter Level One and get a Class G1 licence.
You must pass two road tests to become fully licensed. Passing the first road test lets you
move to Level Two (Class G2), and the second one gives you full Class G driving privileges.
Applying for a licence
To apply for a licence, you must show proof of your legal name and date of birth
(showing day, month and year of birth). Documents must be original and valid.
Photocopies and expired documents are not acceptable.
Bring the documents to a DriveTest Centre or Travel Point (a temporary DriveTest Centre
where there is no regional centre). Phone ahead to find out where the nearest Travel
Point is and when it is open. You can also find it on the Internet at www.drivetest.ca.
(https://drivetest.ca/)
You must pay a fee when you apply. This fee includes the cost of the knowledge test,
your first road test and a five-year licensing fee. There are more charges for your second
road test and for any retests you may need to take. To schedule a road-test appointment,
you must prepay the fee.
When you apply for your licence, you will be asked questions about your health. People
with certain physical or medical conditions are not allowed to drive for safety reasons. If
your physical or medical condition means you cannot be licensed, you will be told when
you apply.
Once you have a licence, you should report any change in your medical condition that
may affect your ability to drive safely. By law, doctors and optometrists must report the
name and address of anyone over 16 who has a condition that may make it unsafe for
him or her to drive.
For further details on applying for a licence, visit the Ministry of Transportation website
(https://www.ontario.ca/page/driving-and-roads) .
Proof of identification
Any one of the following documents may be used to satisfy the requirement to provide
proof of legal name and complete date of birth:
Passport (Canadian or foreign)
Canadian Citizenship Card with photo
Permanent immigration documents
Permanent Resident Card (PRC)
Record of Landing (Form 1000)
Confirmation of Permanent Residence (Form IMM 5292)
Temporary immigration documents
Student Authorization (IMM 1442)
Employment Authorization(IMM 1442)
Visitor Record (IMM 1442)
Temporary Resident’s Permit (IMM 1442)
Report Pursuant to the Immigration Act (IMM 1442 with photo)
Additional documents
Additional documents are required if the document presented from the previous list
does not indicate the legal name or complete date of birth (day, month, year). The
additional documents must provide proof of the missing or incomplete information.
The following documents are acceptable as proof of date of birth and legal name:
Canadian or U.S. Birth Certificate
Proof of legal name
If additional documents presented to prove date of birth do not indicate the applicant’s
legal name (for example, the name has been changed or is different on the two
documents presented), the applicant will be required to provide additional documents as
proof of legal name. The following additional documents are acceptable as proof of legal
name:
Marriage certificate (Canadian or foreign, government-issued)
Change-of-name certificate
Court order for adoption, change of name or divorce (must bear legal name, date of
birth and court seal)
To confirm complete date of birth where no or only partial date of birth is available:
Sworn affidavit stating reason why partial or no date is available, with supporting
documents. Please contact ServiceOntario at 416-235-2999 or toll free at
1-800-387-3445 (Canada-wide) for further information.
Note: Direct identification by a parent or guardian is not acceptable.
Graduated licensing requirements
Here are the rules you must follow at each level:
Level One (Class G1)
G1 knowledge test – checklist
G1 exit test – checklist
Level Two (Class G2)
Road tests
Level One (Class G1)
Level One lasts 12 months. The Ministry of Transportation encourages all new drivers to
take an approved driver-education course to help learn the proper driving skills and
knowledge. You should begin your training as soon as you become a Level One driver so
you can get as much driving experience as possible. If you pass an approved course, you
can complete Level One in eight months. While at Level One, the following rules apply:
You must not drive if you have been drinking alcohol. Your blood-alcohol level must
be zero.
You must not drive alone; an accompanying driver must sit in the front passenger
seat. This is the only person who can be in the front seat with you while you drive.
The accompanying driver must have a valid Class G (or higher) licence, at least four
years of driving experience and a blood-alcohol level of less than .05% when
accompanying you. Time spent at the Class G2 level, as long as the G2 licence was
valid (not suspended), does count toward the accompanying driver’s four years of
experience. The accompanying driver’s licence may have demerit points, but it
cannot be suspended.
Each person in the vehicle must have a working seatbelt.
You must not drive on 400-series highways with a posted speed limit over 80 km/h.
Also, you must not drive on certain high-speed roads including the Queen Elizabeth
Way, Don Valley Parkway and the Gardiner Expressway in the Greater Toronto Area,
the E.C. Row Expressway in Windsor and the Conestoga Parkway in Kitchener-
Waterloo. However, if your accompanying driver is a driving instructor, you may
drive on any road.
You must not drive between midnight and 5 a.m.
You must pass a road test of your driving skills to move to Level Two. At this time, you will
be given a Class G2 licence.
G1 knowledge test – checklist
Before taking the G1 knowledge test, make sure you have studied the Official MTO
Driver’s Handbook.
Bring the following items to the test:
Two pieces of identification
Money for test fees – cash, debit or credit card
Glasses or contact lenses (if you need to wear them to drive)
Before taking the G1 exit test, make sure you have studied the Official MTO Driver’s
Handbook.
Bring the following items to the test:
Vehicle in good working order
Money for test fees (if applicable)
Arrive at least 30 minutes before Road Test appointment
Level Two (Class G2):
Level Two lasts at least 12 months. At this level, you have more privileges because of your
driving experience.
At Level Two:
You must not drive if you have been drinking alcohol. Your blood-alcohol level must
be zero.
Each person in the vehicle must have a working seatbelt.
In addition, the following restrictions apply between the hours of midnight and 5 a.m. to
G2 drivers aged 19 years and under.
In the first six months after receiving your G2 licence, you are allowed to carry only
one passenger aged 19 or under.
After six months with your G2 licence and until you obtain your full G licence or turn
20, you are allowed to carry up to three passengers aged 19 or under.
Exemptions: The passenger restrictions for G2 drivers aged 19 and under do not apply if
you are accompanied by a fully–licensed driver (https://www.ontario.ca/document/official-
mto-drivers-handbook/getting-your-drivers-licence#level-one) in the front passenger seat, or if
the passengers are members of your immediate family (a guardian or those related to
you by blood, marriage, common–law relationship or adoption).
After 12 months at Level Two, you may take a road test to qualify for full licence
privileges. You must pass this test to get a Class G licence.
Note: It is now law that all young drivers 21 and under, regardless of licence class, must
have a blood-alcohol level of zero.
Note: A restricted Class M licence for limited-speed motorcycle and moped drivers allows
licence holders to drive only a limited-speed motorcycle and moped. You are not
permitted to drive a limited-speed motorcycle or moped on any driver’s licence other
than a class M licence (including M1, M2(L),M2, M(L) or M). For more information on how
to obtain a restricted Class M licence to drive a moped, and graduated licensing
requirements, please read the Official MTO Motorcycle Handbook
(http://www.mto.gov.on.ca/english/publications/handbooks.shtml#Motorcycle) .
Road tests
Road tests check your driving skills in the vehicle and in traffic. You will be tested on your
ability to follow the rules of the road and safe driving practices.
When you feel qualified to drive safely and confident enough to take your road test,
schedule an appointment by internet, phone or in-person at any DriveTest Centre. You
can contact the DriveTest Centre at 647-776-0331 or 1-888-570-6110 , or go online to
DriveTest.ca (https://drivetest.ca/) .
You must bring the appropriate vehicle to your road test. The vehicle must be fit, in
proper working condition, plated and insured.
If you are a Level One driver, an accompanying driver must come with you to the test
centre. If you are a Level Two driver, be prepared to take alternate transportation home
in case you fail your road test and are unqualified to drive.
No pets or passengers other than the driver examiner are allowed in the vehicle during a
road test. Driving instructors, friends, relatives and translators may not accompany you
during the test.
All road tests have a set time frame. Before you begin your test, the examiner will inform
you of the time you have to complete the test. You will not be asked to do anything illegal
during the road test. The examiner will explain the test, and you should follow his or her
instructions. The examiner is not allowed to coach you during the test, so if you have any
questions, ask them before you begin.
Electronic driving aids such as automatic parallel-parking systems, lane monitoring,

cruise control, and back cameras may not be used during the road test. On a road test,
you are required to demonstrate the proper skills in operating a motor vehicle without
the reliance of driving aids (for example, shoulder checks, mirror checks and so on).
At the end of each test, the examiner will give you a complete report of your skills, and
explain any mistakes you have made. If you fail the test, the report will show you where
you need to improve. When you have had more practice, you can make an appointment
to take the test again. You must wait at least 10 days between tests.
You must have highway driving experience (experience driving on highways with speed
limits of at least 80 km/h) before taking the G2 exit test. You must complete a Declaration
of Highway Driving Experience form, describing the highway driving experience you have,
before taking the road test. Bring the following items to the test:
Vehicle in good working order
Money for test fees (if applicable)
Arrive at least 30 minutes before Road Test appointment
Failure to attend road test, or short notice cancellation
If you cancel or reschedule your road test appointment with less than 48 hours notice, or
if you fail to attend your appointment, your prepaid road-test fee will not be refunded.
Under certain extenuating circumstances only (such as a death in your immediate
family), the road-test fee will remain as a credit on your driving record.
Out-of-order road test
If your vehicle does not meet ministry standards for the purpose of a road test, or if
there is a non-vehicle-related reason for which the examiner determines that the road
test cannot be completed, the examiner declares the road test out-of-order. If your road
test is declared out-of-order, you lose 50% of your road test fee. The other 50% of the fee
remains as a credit on your driving record, and may be applied when booking a new road
test. In order to book the new road test, you will have to pay the 50% of the fee deducted
due to the out-of-order.
If you have any concerns that your road test may be declared out-of-order, contact the
DriveTest Centre (http://www.drivetest.ca) before your scheduled test to discuss it.
New Ontario residents
If you are a new resident of Ontario and have a valid driver’s licence from another
province or country, you can use that licence for 60 days in Ontario. If you want to
continue to drive after 60 days, you must get an Ontario driver’s licence.
Licence Exchange for Countries with Reciprocating Jurisdictions
Ontario has licence-exchange agreements with every Canadian province and territory
(including Canadian Forces Europe). There are also agreements with Australia, Austria,
Belgium, France, Germany, Great Britain, Ireland, the Isle of Man, Japan, New Zealand,
Northern Ireland, Republic of Korea, Switzerland, Taiwan and the United States.
Drivers will receive a full Class G licence, provided they have an equivalent class licence. If
you have fewer than two years of driving experience, you may get credit for your
experience and enter Level Two of the graduated licensing system. Once you have a total
of two years of driving experience, you may take the Level Two road test to earn full
driving privileges.
Licence Exchange for Non-reciprocating Jurisdictions
All applicants for an Ontario driver’s licence are required to present a valid foreign
driver’s licence pass a vision test, a knowledge test, pay all applicable fees and provide
acceptable proof of identity.
Applicants who fulfill these requirements can obtain a G1 licence. The applicant
may take their G1 exit test with 12 months of combined Ontario and foreign
experience.
The 12-month waiting period will be reduced to eight months with the successful
completion of a ministry-approved, beginner driver education course.
Applicants are required to provide adequate proof of foreign-licensed driving

experience. However, the ministry may accept an applicant’s declaration of their
foreign-licensed driving experience for up to 12 months.
For more than 12 months’ experience, applicants must provide an authenticated

letter from their embassy/ consulate or licencing agency in English or French. A full
24 months of Ontario and foreign experience is required prior to attempting their
G2 exit test.
Only experience within the past three years may be credited.
Driving customs vary from place to place. That is why experienced drivers from other
countries should familiarize themselves with Ontario’s laws. The Official MTO Driver’s
Handbook and the Ministry of Transportation website are great resources.
Could You Pass?
The rest of this handbook gives you information you need to pass your tests and to keep
your driving privileges once you get your licence. The written test may ask you about:
Seatbelts
Traffic signs and lights
Emergency vehicles
How to use headlights
Speed limits
Getting on or off a freeway
What drivers must do when they meet streetcars and school buses
Driver licence suspensions
The demerit point system
Passing other vehicles
Collision reporting
Sharing the road with other road users
Rules of the road
The road tests will test how well you use your knowledge while driving. You will be tested
on:
Starting, stopping and turning
Traffic signs and lights
Passing vehicles, including bicycles, and driving in passing lanes
Travelling through controlled and uncontrolled intersections
Parallel parking and reversing
Foreseeing hazardous conditions and being ready for them
Other safe driving practices
Make sure you know the information in this handbook before you take these tests.
Sample test questions (https://www.ontario.ca/document/official-mto-drivers-handbook/test-
yourself-sample-knowledge-test-questions) that could appear on the knowledge test.
Choosing a driving school
As a new driver, your choice of professional driving instruction may be the best way to
put yourself safely in the driver’s seat.
A beginner driver education (BDE) course in a driving school that has been approved by
the provincial government can teach you the skills and attitudes you need to be a safe
and responsible driver. The BDE course may also make you eligible to take your road test
sooner and allow you to save money on insurance premiums.
As well as teaching the basics, driver training emphasizes strategic driving techniques,
positive driving attitudes and behaviour, avoiding driver distractions, risk perception and
management, freeway driving, night driving and driving in adverse conditions. Most
programs are designed for new drivers, but many driving schools also provide courses
and services to upgrade your skills.
If you graduate from an approved BDE course, this will be noted in your driver’s licence
history, and will reduce the time you must spend at Level 1 by four months. It may also
bring you savings on your car insurance.
All ministry-licenced driving schools offer in-class and in-car training for a fee. All lessons
are taught by a ministry-licensed driving instructor.
Ministry-approved BDE courses, offered by driving schools, must last a minimum of 40

hours. This may consist of at least 20 hours in-class, 10 hours in-vehicle and 10 hours of
flexible instruction that may include the following:
Classroom driving instruction.
Computer-based instruction.
In-vehicle instruction.
Driving simulator instruction.
Home links (homework).
The ministry licenses all driving schools offering a BDE course in Ontario. Licences are
renewed every three years, if driving schools continue to meet legislative and program
requirements. Only licensed instructors working for licensed schools can teach the BDE
course.
All ministry-approved driving schools (http://www.mto.gov.on.ca/english/driver/driving-

schools.shtml) are listed on the ministry’s website.
Note: The ministry also lists revoked driving schools

(http://www.mto.gov.on.ca/english/driver/revoked-driving-schools.shtml) that are not on
the list of approved schools.
Look at the website for an active ministry-approved driving school that offers high-quality
instruction and a comfortable learning environment. Please make sure the school offers
a ministry-approved BDE course of a minimum of 40 hours. The school should also be
equipped with up-to-date videotapes, DVDs, projectors, overheads, computers, and other
audio-visual aids.
To help you choose the best driving school and course for you, please use the following
checklist:
Course information package
Personalized program
Adequacy of classroom facilities and related amenities
Low student/teacher ratio
Audiovisual equipment
In-class topics covered
In-vehicle topics covered
Flexible instruction covered
Instructor qualifications and experience
Regular instructor upgrading
Student progress and evaluation reports
Minimum 20 hours of classroom instruction, 10 hours behind-the-wheel instruction

and 10 hours of flexible instruction
Modern training materials
Use of vehicle for road test
Tuition receipts
Clear school-contract statements regarding the cost of every aspect of the course,
including use of vehicle for road test and any subsequent road test
Testimonials/references – history of excellent teaching, proper treatment and

respect of all students with no discrimination of any type (see the Ontario Human
Rights Code)
Number of years in business
Consumer protection insurance
Summary
By the end of this chapter, you should know:
The legal requirements you must meet to obtain a driver’s licence
The different licence classifications and what type of vehicle they permit you to
drive
The identification you need to provide when applying for a driver’s licence
The restrictions and testing requirements under the graduated licensing system
Safe and Responsible Driving

Being a safe and responsible driver takes a combination of knowledge, skill and attitude.
To begin, you must know the traffic laws and driving practices that help traffic move
safely. Breaking these “rules of the road” is the major cause of collisions.
Traffic laws are made by federal, provincial and municipal governments, and police from
each level can enforce them. If you break a traffic law, you may be fined, sent to jail or
lose your driver’s licence. If you get caught driving while your licence is suspended, your
vehicle may be impounded.
But you need to do more than just obey the rules. You must care about the safety of
others on the road. Everyone is responsible for avoiding collisions. Even if someone else
does something wrong, you may be found responsible for a collision if you could have
done something to avoid it.
Because drivers have to co-operate to keep traffic moving safely, you must also be
predictable, doing what other people using the road expect you to do. And you must be
courteous. Courteous driving means giving other drivers space to change lanes, not
cutting them off and signalling your turns and lane changes properly.
You must be able to see dangerous situations before they happen and to respond quickly
and effectively to prevent them. This is called defensive or strategic driving. There are
collision avoidance courses available where you can practice these techniques.
Defensive driving is based on three ideas: visibility, space and communication.
Visibility is about seeing and being seen. You should always be aware of traffic in front,
behind and beside you. Keep your eyes constantly moving, scanning the road ahead and
to the side and checking your mirrors every five seconds or so. The farther ahead you
look, the less likely you will be surprised, and you will have time to avoid any hazards.
Make sure other drivers can see you by using your signal lights as required.
Managing the space around your vehicle lets you see and be seen and gives you time
and space to avoid a collision. Leave a cushion of space ahead, behind and to both sides.
Because the greatest risk of a collision is in front of you, stay well back.
Communicate with other road users to make sure they see you and know what you are
doing. Make eye contact with pedestrians, cyclists and drivers at intersections and signal
whenever you want to slow down, stop, turn or change lanes. If you need to get another
person’s attention, use your horn.
Getting ready to drive (https://www.ontario.ca/document/official-mto-drivers-

handbook/getting-ready-drive)
Driving along (https://www.ontario.ca/document/official-mto-drivers-handbook/driving-

along)
Sharing the road with other road users (https://www.ontario.ca/document/official-mto-

drivers-handbook/sharing-road-other-road-users)
Driving through intersections (https://www.ontario.ca/document/official-mto-drivers-

handbook/driving-through-intersections)
Stopping (https://www.ontario.ca/document/official-mto-drivers-handbook/stopping)
Changing directions (https://www.ontario.ca/document/official-mto-drivers-

handbook/changing-directions)
Changing positions (https://www.ontario.ca/document/official-mto-drivers-

handbook/changing-positions)
Parking along roadways (https://www.ontario.ca/document/official-mto-drivers-

handbook/parking-along-roadways)
Freeway driving (https://www.ontario.ca/document/official-mto-drivers-

handbook/freeway-driving)
Dealing with particular situations (https://www.ontario.ca/document/official-mto-

drivers-handbook/dealing-particular-situations)
Driving at night and in bad weather (https://www.ontario.ca/document/official-mto-

drivers-handbook/driving-night-and-bad-weather)
Dealing with emergencies (https://www.ontario.ca/document/official-mto-drivers-

handbook/dealing-emergencies)
Driving efficiently (https://www.ontario.ca/document/official-mto-drivers-

handbook/driving-efficiently)
Getting ready to drive

Before you drive, make sure you are comfortable with your physical, mental and
emotional state, your vehicle and the conditions in which you will be driving. If you have
doubts about any of them, don't drive.
Your ability to drive can change from one day to the next. Illness, fatigue, prescription
and over-the-counter drugs, stress and your mental or emotional state can greatly
diminish your ability to operate a motor vehicle. You should consider these factors
before you begin driving, and you should not operate a motor vehicle when you are not
fit to do so.
Be physically and mentally alert
You must be in good physical and mental condition to drive. Don't drive when you are
sick or injured or when you have been drinking alcohol or taking any drug or medication
that may reduce your ability to drive.
Don't drive when you are tired. You might fall asleep at the wheel, risking the lives of
others on the road. Even if you don't fall asleep, fatigue affects your driving ability. Your
thinking slows down and you miss seeing things. In an emergency, you may make the
wrong decision or you may not make the right decision fast enough.
Don't drive when you are upset or angry. Strong emotions can reduce your ability to
think and react quickly.
Know your vehicle
Diagram 2-1
Get to know your vehicle before you drive it. There are many types of vehicles available
today with many different characteristics, including fuel ignition systems, anti-lock
brakes, four-wheel drive, and systems for traction control and stability control. Many
newer vehicles offer technologies that assist drivers with steering, braking and/or
accelerating to help you stay within your lane, avoid, or reduce collisions, and maintain
safe following distances. Check the vehicle owner’s manual and other information
available from the automaker to learn how these systems work, how to properly operate
them, and to understand their limitations.
No matter what technologies are available in your vehicle, you must always pay attention
to how they operate, be ready to take over control of the vehicle in the event of an
unusual or unforeseen situation, and recognize that you remain responsible for all
driving tasks.
For driving in difficult situations and conditions, see the section on dealing with particular
situations (https://www.ontario.ca/document/official-mto-drivers-handbook/dealing-particular-
situations) .
Make sure you know where all the controls and instruments are and what they do. Check
that all warning lights and gauges work. Watch for a warning light that stays on after you
drive away; it could mean a serious problem with your vehicle.
Get to know the controls well enough to turn on wipers and washers, headlights, high
beams, heater and defroster without having to look. Learning to use these essential
controls without taking your eyes off the road is an important part of driving.
Get into position
Diagram 2-2
Make sure you sit properly behind the wheel. You should sit high enough in the driver’s
seat to see over the steering wheel and hood. You should be able to see the ground four
metres in front of the vehicle. Use a firm cushion if needed.
Be sure that you are sitting straight upright in the seat with your elbows slightly bent.
Adjust the seat so your feet reach the pedals easily. To check your position, try placing
your feet flat on the floor under the brake pedal. If you can do this without stretching,
you are seated properly. This keeps you in the proper, upright sitting position and gives
you more stability when manoeuvring your vehicle.
If your vehicle has an adjustable headrest, you should make sure it is at the right height.
The back of your head should be directly in front of the middle of the headrest to protect
you in a collision.
Check that you have enough room in the front seat to drive properly and safely. Do not
overcrowd your driving space with passengers or property.
Keep a clear view
Keep a clear view when driving. Do not put anything in your windows that will block your
view. The windows of your vehicle must not be coated with any material that keeps you
from seeing out in any direction. Neither should the windshield or front door windows be
coated to keep someone from seeing inside the vehicle.
Find your blind spots
Diagram 2-3
Check and adjust your mirrors and find your blind spots, the area on each side of your
vehicle where you cannot see. You may not see people or cyclists when they are in these
spots. On some vehicles the blind spot is so large that a vehicle could be there and you
would not see it.
Adjust your mirrors so that there are as few blind spots as possible. Blind spots in most
vehicles are to the back left and back right of the vehicle. To reduce the blind spots even
more, position the interior mirror so that the centre of the mirror shows the centre of the
rear window. You should be able to see directly behind the car when the interior mirror is
properly adjusted. Position the left outside mirror by leaning towards the window and
moving the mirror so that you can just see the rear of your car. Position the right outside
mirror by leaning to the centre of the vehicle and moving the mirror so that you can
again just see the rear of your car. Avoid overlap in what you can see in your mirrors.
Because your side mirrors show only narrow angles of view, turning your head to do
shoulder checks is the only way to make sure there is nothing in your blind spots.
You should know the blind spots on your own vehicle. You can learn where and how large
they are by having someone walk around your car and watching the person in the
mirrors.
Fasten your seatbelt
Diagram 2-4
The proper use of a seatbelt can save your life. Even a small increase in the number of
people who wear their seatbelts can save many lives.
You must use your seatbelt every time you travel in any vehicle equipped with seatbelts.
All passengers must be buckled up in their own seatbelt, child car seat or booster seat.
Drivers who do not buckle up can be fined and will be given two demerit points. Drivers
may also be fined and receive demerit points if they fail to ensure that all passengers
under 16 years of age are properly buckled in a seatbelt, child car seat or booster seat.
Level One (G1) drivers are only allowed to have his or her accompanying driver as a front-
seat passenger, and must have a seatbelt for him or her. Novice drivers must have a
seatbelt for every passenger. Drivers who do not ensure there is a working seatbelt for
every passenger can lose their licence for at least 30 days.
Seatbelts should be worn snugly enough to keep you in your seat during a collision.
Never put more than one person into a seatbelt; this can cause serious injury or even
death in a collision. Wear the shoulder strap over your shoulder, never under your arm
or behind your back. The lap belt should be worn low over the hips, not against the
stomach.
Use your seatbelt always, even when you are sitting in a position with an active airbag.
Airbags do not replace seatbelts. In a collision, your seatbelt will keep you in position so
that the airbag can protect you.
Note: The safest place a passenger can travel is inside a vehicle, properly buckled in. It is
not safe to travel outside a vehicle, such as in the back of a pickup truck, or in a trailer
that is being towed. It is important for passengers to be secured within a to avoid being
thrown from the vehicle during a collision.
For more information on seatbelts, visit the Ministry of Transportation

(https://www.ontario.ca/transportation) website.
Child safety
Diagram 2-5
To be safely protected in a vehicle, children must be properly secured in a child car seat,
booster seat or seatbelt, depending on their height, weight and/or age. Research shows
that a correctly used child car seat can reduce the likelihood of injury or death by 75 per
cent.
As a driver, you are responsible for ensuring that all passengers under 16 years of age
are properly buckled into a seatbelt, child car seat or booster seat. In Ontario, all drivers
must use proper child car seats and booster seats when transporting young children.
Child car seats must meet Canadian Motor Vehicle Safety Standards. Buckles and straps
must be fastened according to the manufacturer’s instructions. Newer vehicles that
come equipped with a lower universal anchorage system (UAS) for securing a child car
seat do not require the use of a seatbelt. A booster seat requires a lap and shoulder belt
combination.
Infants who weigh less than 9 kilograms (20 lbs.) must be buckled into a rear-facing child
car seat attached to the vehicle by a seatbelt or the UAS strap. A rear-facing child car seat
is always best installed in the back seat. Never put a rear-facing child car seat in a seating
position that has an active airbag. If the airbag inflates, it could seriously injure the child.
Toddlers 9 to 18 kilograms (20 to 40 lbs.) must be buckled into a child car seat attached
to the vehicle by a seatbelt or a UAS strap; the seat’s tether strap must also be attached
to the vehicle’s tether anchor. Children weighing more than 9 kilograms (20 lbs.) may
remain in a rear-facing child car seat if it is designed to accommodate the child’s height
and weight. Always follow the manufacturer’s instructions when installing a child car seat
in your vehicle.
Booster seats provide 60 per cent more protection than seatbelts alone. These must be
used by pre-school and primary-grade-aged children who have outgrown their forward-
facing child car seat, are under the age of eight and weigh 18 kilograms (40 lbs.) or more
but less than 36 kilograms (80 lbs.), and who are less than 145 centimetres (4 feet, 9
inches) tall. Booster seats raise a child so that the adult seatbelt works more effectively.
The child’s head must be supported by the top of the booster, vehicle seat or headrest.
You must use a booster seat with a lap/shoulder belt. The lap/shoulder belt should be
worn so that the shoulder belt fits closely against the body, over the shoulder and across
the centre of the chest and the lap belt sits firmly against the body and across the hips.
Always follow the manufacturer’s instructions when installing a booster seat in your
vehicle, and secure the booster seat with a seatbelt when a child is not travelling in it, or
remove it from the vehicle.
If your vehicle has lap belts only, secure the child by the lap belt only. Never use a lap belt
alone with a booster seat.
Children may begin wearing a seatbelt once they are able to wear it properly (a lap belt
flat across the hips, shoulder belt across the centre of the chest and over the shoulder),
and if any one of the following criteria is met:
The child turns eight years old.
The child weighs 36 kilograms (80 lbs.) or more.
The child is 145 centimetres (4 feet 9 inches) tall or taller.
Do not place a child in a seating position in front of an air bag that is not turned off. The
safest place for a child under age 13 is in the back seat.
Always secure loose objects in the vehicle with cargo nets or straps, or move them to the
trunk to prevent them from injuring passengers in a collision or sudden stop.
Correct installation of a child car seat is important for ensuring a child’s safety. Your local
public health unit is a good resource for finding out how to properly install a child car
seat, or visit a local car seat clinic where certified technicians will help you install the seat.
For more information on child car seats visit the Ministry of Transportation
(https://www.ontario.ca/transportation) website.
Note: Be careful if buying a used child car seat. Considerations should include ensuring
the child car seat comes with complete manufacturer’s instructions and all necessary
equipment; does not show signs of deterioration or damage; has never been in a
collision; is not under recall; and has not exceeded its useful life expectancy as
determined by the manufacturer.
Seatbelts and child car seats save lives
Seatbelts and child car seats reduce the risk of injury or death in collisions.
Seatbelts help keep you inside and in control of the vehicle during a collision.
People who are thrown from a vehicle have a much lower chance of surviving a
collision.
Seatbelts keep your head and body from hitting the inside of the vehicle or another
person in the vehicle. When a vehicle hits a solid object, the people inside keep
moving until something stops them. If you are not wearing your seatbelt, the
steering wheel, windshield, dashboard or another person might be what stops you.
This “human collision” often causes serious injury.
Fire or sinking in water is rare in collisions. If it does happen, seatbelts help keep
you conscious, giving you a chance to get out of the vehicle.
In a sudden stop or swerve, no one can hold onto a child who is not in a seatbelt or
child car seat. Infants or children who are not properly restrained can be thrown
against the vehicle’s interior, collide with other people or be ejected.
When using a child car seat, make sure that the seat is tightly secured by the vehicle
seatbelt or by the universal anchorage system (UAS) strap, and for a forward-facing
car seat, ensure the tether strap is also used. When installing the child car seat,
press one knee into the seat and use your body weight to push it into the vehicle
seat, then tighten the seatbelt or the car-seat UAS strap as much as possible. The
installed child car seat should move no more than 2.5 centimetres (1 inch) where
the seatbelt or UAS strap is routed through the child car seat.
Use a locking clip where needed to ensure the seatbelt stays locked into position
and will not loosen during a collision. Refer to your vehicle owner’s manual to see if
you will need to use a locking clip.
If a rear-facing child car seat does not rest at the proper 45-degree angle, you can
prop up the base of the seat with a towel or a Styrofoam bar (“pool noodle”). Eighty
per cent of the base of a forward-facing car seat should be firmly supported by the
vehicle seat.
Turn on headlights at night and in poor conditions
Diagram 2-6 - High

beams
Headlights enable you to see the roadway in front of your vehicle when visibility is poor,
as well as making your vehicle visible to others. Your vehicle’s headlights must shine a
white light that can be seen at least 150 metres in front and is strong enough to light up
objects 110 metres away. You must also have red rear lights that can be seen 150 metres
away and a white light lighting the rear licence plate when headlights are on. Headlights
are equipped with the option to use a high beam to enhance vision further down the
roadway and the use of a low beam when you are near other vehicles to minimize the
glare of your headlights onto others. When you use high-beam headlights, remember to
switch to low beams within 150 metres of an oncoming vehicle. Use your low beams
when you are less than 60 metres behind another vehicle unless you are passing it.
These rules apply to all roads, including divided ones.
Turning your headlights on activates other required light systems, such as your parking
lights, tail lights and rear-licence plate light. Daytime running lights, which are often
another mode of your headlights or can be a separate lighting system, are specifically
designed to make your vehicle more visible during times of good light conditions, and are
automatically activated when your vehicle is in operation and your headlight switch is
turned to off.
When driving your vehicle, headlights are required to be turned on between one-half
hour before sunset and one-half hour after sunrise, and any other time of poor light
conditions, such as fog, snow or rain, which keeps you from clearly seeing people or
vehicles less than 150 metres away. Please see the section on driving at night and in bad
weather (https://www.ontario.ca/document/official-mto-drivers-handbook/driving-night-and-
bad-weather) . Don't drive with only one headlight or with lights that are not aimed
properly. Have your full lighting system checked regularly, keep them clean, and replace
burned-out bulbs as soon as possible.
Parking lights are only for parking. In low light, use your headlights, not parking lights.
Diagram 2-7 - Low

beams
Your daytime running lights are not to be used as headlights during poor lighting
conditions. They provide an inappropriate form of light that may cast glare onto others
or deactivate other required light systems, such as tail lights. Daytime running lights are
only to be used during good light conditions to enhance the visibility of your vehicle. If
your vehicle is not equipped with daytime running lights, you should turn your headlights
on to provide similar visual enhancement.
Driving with your vehicle’s full lighting system set to automatic is recommended, if your
vehicle is equipped with this option. This will better ensure that the appropriate lighting
system is being used. You should also monitor the activation and operation of your
vehicle’s full lighting system at all times to ensure that appropriate lighting is being
provided.
Summary
By the end of this section, you should know:
The concepts of safe and responsible and defensive driving
Factors that may affect your physical and mental readiness to drive
How to familiarize yourself with your vehicle’s controls and how to set your seating
position
The legal requirements surrounding seatbelts, booster seats, and child car seats
How and when to use your vehicle’s lighting system
Driving along
Always be aware of traffic around you as you drive. Develop a routine for looking ahead,
behind and from side to side. Check your mirrors every five seconds or so, and check
your blind spots by turning your head to look over your shoulder. Keep other drivers out
of your blind spot by changing your speed and don't drive in other vehicles' blind spots.
This is especially true when driving around large commercial vehicles, as they typically
have large blind spots to the sides and back. Be extra careful at dusk and dawn when
everyone has difficulty adjusting to the changing light.
Keep a cushion of space around your vehicle and be prepared for the unexpected.
Anticipate other drivers movements and make allowances for every possible error. Look
well ahead and watch for people in parked vehicles, they may be about to pull out in
front of you or to open a door. Watch for smaller vehicles, bicycles and pedestrians.
Steer smoothly
All steering should be smooth and precise. You should do most steering and lane
changes without taking either hand off the wheel. You must be able to steer in a straight
line while shifting gears, adjusting controls or checking your blind spot.
Picture the steering wheel as a clock and place your hands at nine o'clock and three
o'clock.
Use of turn signals and brake lights
Diagram 2-8
Signals tell other drivers what you want to do, alerting them to your intention to turn or
stop.
Use your turn signals and brake lights to signal before stopping, slowing down, turning,
changing lanes, leaving the road or moving out from a parked position. Give the correct
signal well before taking the action and make sure other drivers can see it. Check that the
way is clear before you act, just signalling is not enough. Follow the rules for turns,
whether left or right, on lane changes and on yields to other vehicles and pedestrians.
If your turn signals and brake lights are not working, use hand and arm signals. The
pictures on the previous page show how to make hand and arm signals. When watching
for signals made by others, remember that cyclists may signal right turns by holding their
right arms straight out.
After signalling, move only when it is safe to do so.
Keep right
Keep to the right of the road or in the right-hand lane on multi-lane roads unless you
want to turn left or pass another vehicle. This is especially important if you are driving
more slowly than other vehicles.
Obey speed limits
Obey the maximum speed limit posted on signs along the road, but always drive at a
speed that will let you stop safely. This means driving below the maximum speed in bad
weather, in heavy traffic or in construction zones. School zones and construction zones
often have lower speed limits to protect children and those who work on or near the
road.
Where there are no posted speed limits, the maximum speed is 50 km/h in cities, towns
and villages, and 80 km/h elsewhere.
Cruise control is a driver aid that can improve fuel economy and prevent you from
inadvertently exceeding the speed limit. However, there are some circumstances in which
cruise control should not be used, such as adverse driving conditions (wet, icy or slippery
roads), in heavy traffic or when you are feeling fatigued.
Speed measuring warning devices are illegal. If you get caught driving with such a device,
you will be fined and accumulate demerit points.
Obey police
When police officers are directing traffic, you must follow their directions, even if the
directions are different from traffic lights or signs.
When a police officer signals you to pull your vehicle over, you must pull over as far to
the right as you safely can and come to a complete stop. Stay in your vehicle and wait for
the police officer. You must immediately, upon the police officer’s request, surrender
your driver’s licence, vehicle permit (or copy) and insurance. Contrary to popular belief,
you do not have 24 hours to present these documents. If you do not obey a police
officer’s direction to pull over, you risk being fined, having your licence suspended or
even serving time in prison.
Maintaining space
As a general rule, drive at the same speed as traffic around you without going over the
speed limit. Leave a cushion of space around your vehicle to let other drivers see you
and to avoid a collision.
Whenever you follow another vehicle, you need enough space to stop safely if the other
vehicle brakes suddenly. A safe following distance is at least two seconds behind the
vehicle in front of you. This lets you see around the vehicle ahead and gives you enough
distance to stop suddenly.
Do not block the normal and reasonable movement of traffic.
Diagram 2-9
To give yourself a two-second space, follow these steps:
1. Pick a marker on the road ahead, such as a road sign or telephone pole.
2. When the rear of the vehicle ahead passes the marker, count "one thousand and
one, one thousand and two".
3. When the front of your vehicle reaches the marker, stop counting. If you reach the
marker before you count "one thousand and two," you are following too closely.
Remember that the two-second rule gives a minimum following distance. It applies only
to ideal driving conditions. You will need extra space in certain situations, such as bad
weather, when following motorcycles or large trucks, or when carrying a heavy load.
Summary
By the end of this section you should know:
How to steer and use your vehicle’s signalling system and hand signals
The importance of maintaining space and how to measure following distance
Where to position your vehicle on the road and to obey speed limits and police
Sharing the road with other road users
Ontario’s roads accommodate many road users, including pedestrians, motorcycles,

bicycles, large trucks, buses and farm machinery. Be aware of other road users, the
speed at which they travel and the space they occupy on the road.
Sharing the road with pedestrians
Road safety is a responsibility that is shared between pedestrians and drivers.

Pedestrians must ensure that drivers have seen them and that drivers are stopped, or
are about to stop, before entering the roadway. Drivers need to exercise due diligence in
the care and operation of their vehicles, to properly respond to the presence of
pedestrians. In most cases, that means yielding to the pedestrian.
Reminder: Eye contact between the pedestrian and driver is one of the keys to
pedestrian safety.
Watch for children – Drive slowly and cautiously through school zones, residential areas
and any other location where children may be walking or playing. A driver should not rely
on a child's knowledge of traffic laws, so expect the unexpected. A child might dart out
from between parked cars or try to cross a street without checking for traffic. Be extra
cautious at twilight when children may still be playing outside, but are difficult to see.
Watch for all crosswalks – A crosswalk can be the portion of a roadway that:
connects sidewalks on opposite sides of the roadway into a continuous path
has signs, lines or other markings on the roadway for pedestrian crossing Do not
pass a vehicle stopped at a crosswalk. A stopped vehicle may be a clue that a
pedestrian is crossing.
Reminder: Not all crosswalks are marked, but nearly all intersections have crosswalks.
Watch for school crossings and guards – Drivers, including cyclists, must stop and yield
the whole roadway at pedestrian crossovers, school crossings and other locations where
there is a crossing guard.
Only when pedestrians and school crossing guards have crossed and are safely on the
sidewalk can drivers and cyclists proceed.
Watch for community safety zones – Signs indicate areas where the community has
identified that there is a special risk to pedestrians.
Watch for slow pedestrians – Many modern urban roads often do not allow sufficient
time to cross for slow pedestrians during the normal traffic cycle. So be patient and allow
all pedestrians time to cross.
Seniors or pedestrians with disabilities need extra caution and courtesy from drivers, as
they may be slow in crossing the road.
Pedestrians who are blind or with a visual disability may use a white cane or guide dog to
help them travel safely along sidewalks and across intersections.
Watch when driving quiet vehicles – Drivers of hybrid or electric vehicles should be
aware that vision-impaired people often rely on the sound of an engine before entering
an intersection. When you are slowing or stopping, your vehicle makes little or no
discernible noise, so extra caution is required.
Watch for wheelchairs and medical scooters – People operating motorized wheelchair
and medical scooters are pedestrians too.
Watch for streetcars – Some streetcar stops have a special safety island or zone for
passengers getting on and off. Pass these safety islands and zones at a reasonable
speed. Always be ready, in case pedestrians make sudden or unexpected moves.
Watch for texters – A no-texting rule isn’t only for drivers. Pedestrians are often
distracted while using devices, including cell phones, ear buds, hand-held device, GPS,
and music players. People using ear buds/headphones often can`t hear car horn or
other traffic noise.
Watch for dark clothing – Pedestrians in dark clothing, especially at night, are difficult
to see. Extra care is needed when driving in low-light conditions. Twilight and dark
clothing often initiate a collision.
Watch for new transport – New technology allows small motors on skateboards,
scooters and even roller blades. These devices may reduce control and even propel users
into the roadway. Many modern electric bikes are made to look like motor scooters.
Watch during turns – Safer, signaled crosswalks aren’t immune to vehicle-pedestrian

collisions. Many more people get hit by cars turning left than by cars turning right,
because both parties are looking elsewhere: The drivers are busy negotiating the
intersection while street-crossers are looking straight ahead.
Sharing the road with cyclists
Bicycles and mopeds travelling at a lower speed than other traffic are expected to ride
about one metre from the curb or parked cars, or as close as practical to the right-hand
edge of the road when there is no curb. However, they can use any part of the lane if
necessary for safety, such as to:
Avoid obstacles such as puddles, ice, sand, debris, rutted or grooved pavement,
potholes and sewer grates
Cross railway or streetcar tracks at a 90° angle
Discourage passing where the lane is too narrow to be shared safely
A bike lane may exist adjacent to parking bays (See Diagram 2-10)
Diagram 2-10
Cyclists are not required to ride close to the right edge of the road when they are
travelling at or faster than the normal speed of traffic at that time and place, or when
they are turning left, or getting in position to turn left. (Cyclists are permitted to make a
left turn from a left-turn lane, where one is available.)
Diagram 2-11
When passing a cyclist, drivers of motor vehicles must maintain a minimum distance of
one metre, where practical between their vehicle and the cyclist. (See Diagram 2-11.)
Failure to do so may result in a fine and an additional two demerit points on the driver’s
record. Whenever possible, you should change lanes to pass.
Do not follow too closely behind cyclists. They do not have brake lights to warn you when
they are slowing or stopping.
Intersections – To avoid collisions with bicyclists at intersections, remember the

following:
When turning right, signal and check your mirrors and the blind spot to your right
to make sure you do not cut off a cyclist.
When turning left, you must stop and wait for oncoming bicycles to pass before
turning.
When driving through an intersection, be careful to scan for cyclists waiting to turn
left.
Do not sound your horn unnecessarily when you are overtaking a cyclist. It may frighten
them and cause them to lose control. If you feel that you must use your horn, tap it
quickly and lightly while you are still some distance away from the cyclist.
Diagram 2-12
Bike lanes are reserved for cyclists. They are typically marked by a solid white line.
Sometimes you will need to enter or cross a bike lane to turn right at a corner or
driveway. (See Diagram 2-12) Take extra care when you do this. Enter the bike lane only
after ensuring that you can do so safely, and then make the turn.
Watch for cyclists' hand signals. A cyclist may indicate a right-hand turn by extending
their right arm.
Try to make eye contact when possible with cyclists.
Diagram 2-13
Bike boxes help prevent collisions between motorists and bicycles at intersections. It is
typically a painted box on the road with a white bicycle symbol inside. Bicycle lanes
approaching and leaving the box may also be painted. As a driver, you must stop for a
traffic signal behind the bike box. Do not stop in the box. See (Diagram 2-13)
Diagram 2-14
Sharrows A bicycle sharrow, two chevrons painted above a bicycle symbol on the road,
indicates the lane is shared. Vehicle or bicycle traffic may be in the lane. Although you
should always keep on the lookout for bicyclists, this serves as an additional warning to
watch for them in the lane. See (Diagram 2-14)
Children riding bicycles on the street may lack the necessary training and skills for safe
cycling. They may not be aware of all the dangers or the rules of the road. Watch for
children on oversized bicycles, as they may not have the ability to control it. When parked
on the side of the roadway, look behind you and check your mirrors and blind spots for a
passing cyclist before opening a door.
Sharing the road with motorcycles and limited-speed motorcycles
Motorcycles, limited-speed motorcycles, mopeds and bicycles are harder to see because
of their size. Drivers of these vehicles may make sudden moves because of uneven road
surfaces or poor weather conditions. Because they are less protected, they are more
likely to be injured in a collision.
Motorcycles use a full lane; treat them like other vehicles when driving. Since many
motorcycle turn signals do not automatically shut off, be careful when turning left in
front of an oncoming motorcycle with its turn signal on. Make sure the motorcyclist is
actually turning; he or she may have just forgotten to switch off the turn signal.
Sharing the road with large commercial vehicles
It is extremely important to know how to drive safely when sharing the road with large
commercial vehicles such as tractor-trailers and buses. Recent data show that the
majority of fatalities resulting from collisions involving large commercial trucks are not
the result of the truck driver’s actions, but of the other driver’s actions. Therefore,
sharing the road with large commercial vehicles means you must always be aware of a
large vehicle’s capabilities and limitations, such as of the following:
1. Blind Spots - Large commercial vehicles have big blind spots on both sides. Avoid
tailgating a large vehicle. The driver cannot see you if you are directly behind. If the
vehicle stops suddenly, you have no place to go. Remember that if you can't see the
driver’s face in the large vehicle’s side-view mirror, the driver cannot see you.
Diagram 2-15
2. Stopping Distance - Large commercial vehicles require a much longer distance to stop
than smaller vehicles. When passing a large vehicle, do not cut in front closely. Not only is
this discourteous, it is dangerous; it reduces the space cushion large vehicles require in
order to stop safely. Allow more room when passing a large vehicle.
Diagram 2-16
3. Wide Turns - When making a right turn, a large vehicle may need to first swing wide to
the left and around, in order to avoid hitting the right curb. If a large vehicle in front of
you is making a right turn, do not move up into the space that opens up in the right lane;
you are putting yourself into a very dangerous position. Once the front of the vehicle has
cleared the corner, the rest will move partially back into the right lane. If you are in that
lane, your vehicle will be squeezed between the trailer and the curb. Stay well back until
the truck has completely cleared the lane.
This situation can occur on expressway off-ramps that have two left turning lanes. Do not
drive up into the left lane when a large vehicle is making a left turn in front of you. Stay
well back until the truck has cleared the left turn, or else you may get squeezed between
the truck and the curb.
4. Rolling Back - Leave plenty of room if you are stopped behind a large vehicle. When
the driver of a large vehicle releases the brakes after being stopped, the vehicle may roll
back.
5. Spray - In bad weather, large vehicles are capable of spraying up large amounts of
mud, snow and debris, which could land on your windshield and temporarily block your
vision.
6. Turbulence - Due to various factors such as air pressure and airflow, a large vehicle
can create heavy air turbulence. This may affect your ability to control your vehicle when
passing a large one.
Sharing the road with municipal buses
Many municipal roadways have special indented stopping areas for municipal buses,
called bus bays, where passengers can get on and off. There are three types of bus bays:
Mid-block indented bays
Indentations immediately before and after intersections
Bus-stop areas between two designated parking areas
When a bus in a bus bay begins flashing its left-turn signals, indicating that it is ready to
leave the bus bay, and you are approaching in the lane adjacent to the bus bay, you must
allow the bus to re-enter traffic.
Diagram 2-17
A: Mid-block indented bays
B: An indentation before an intersection
C: An indentation after an intersection
D: Bus stops between legally parked cars
Sharing the road with farm machinery
Farm machinery moves quite slowly compared to other road users. Most tractors and
combines have a maxi-mum speed of 40 km/h, but travel at less than 40 km/h when
towing implements or wagons. Farm machinery is often oversized, wide or long or both,
making it difficult for the driver to see vehicles coming up from behind. Farmers often
turn directly into fields rather than roads or lanes, or move from lane to lane. Remember
that it is common for farmers to be on the roads after dark during peak planting and
harvesting seasons.
Farm machinery on the road must display an orange and red slow-moving sign
(https://www.ontario.ca/document/official-mto-drivers-handbook/signs#section-5) on the rear of
the vehicle. The sign warns other drivers that the is travelling at 40 km/h or less. If you
see one of these signs, slow down and be cautious. Stay well back and do not pass until it
is safe to do so.
Sharing the road with horse-drawn vehicles
Horse-drawn vehicles are one of the slowest moving of all road users. These vehicles
range from two-person carts to open or closed buggies carrying up to eight people, and
large, wide farm wagons used to carry crops, equipment and other goods. These vehicles
will travel primarily on the shoulder of roadways, but may straddle or enter the paved
lane where shoulders are narrow or no shoulder exists – such as bridge crossings.
Remember that it is common to see horse-drawn vehicles throughout southwestern
Ontario and increasingly in eastern and northern Ontario.
Horse-drawn vehicles on the road must display an orange and red slow-moving sign on
the rear of the buggy. In addition, many buggies have highly reflective tape affixed to the
side and rear of the vehicle. The sign warns other drivers that this vehicle is travelling at
40 km/h or less, and the reflective tape illuminates as headlights hit the buggy. If you see
a horse-drawn vehicle, slow down and be very cautious. Maintain a safe following
distance and only pass when it is safe to do so. When approaching a horse-drawn vehicle
travelling in the opposite direction, move to the far right of your lane. When passing, give
as much distance between you and them as possible. Passing too closely could scare or
startle the horse, causing it to change direction suddenly on the roadway.
Sharing the road with school buses
When you see a school bus with its overhead amber lights flashing:
These signals indicate that the bus is coming to a stop to pick up or drop off
passengers
Slow down and prepare to stop whether you are behind or approaching the bus
If you are on a road with a median strip, only vehicles approach from the rear of the
bus should prepare to stop
Diagram 2-18
When you see a school bus with its overhead red lights flashing or its stop arm activated:
You must stop whether you are behind or approaching the bus
If you are on a roadway with a median strip, only vehicles approaching from the
rear of the bus must stop
If you are approaching from the rear of the vehicle, stop at least 20 meters away
Do not proceed on your route until the bus moves, the overhead red lights have
stopped flashing and its stop arm is no longer activated
It is dangerous and illegal to fail to stop for a stopped school bus that has its
overhead red lights flashing or its stop arm activated
Diagram 2-19
Summary
The importance of sharing the road with other road users, especially large vehicles,
school buses, cyclists, and pedestrians
How to share the road with other road users safely and appropriately
Driving through intersections

Be alert as you come to intersections and look carefully for pedestrians, cyclists, other
motor vehicles, yield signs, stop signs and traffic lights. Be sure to scan any sidewalks and
paths/trails as well as the roadways. Bear in mind that children are often unaware of
traffic laws and also that cycling on the sidewalk may be permitted by local bylaw.
Diagram 2-18
There are two main types of intersections: controlled and uncontrolled.
Controlled intersections
Diagram 2-19
Controlled intersections have traffic lights, yield signs or stop signs to control traffic
(Diagram 2-19).
At a controlled intersection where you face a green light, drive carefully through the
intersection at a steady speed. If the light has been green for a while, be prepared to stop
when it turns yellow. However, if you are already so close that you cannot stop safely,
drive through the intersection with caution. Where you face a red light, come to a
complete stop and wait until the light turns green.
When you approach an intersection on a main road, and the intersection is blocked with
traffic, stop before entering the intersection and wait until the traffic ahead moves on.
This does not apply if you are turning left or right.
At a controlled intersection where you face a yield sign, slow down or stop if necessary
and wait until the way is clear before driving through the intersection.
At a controlled intersection where you face a stop sign, come to a complete stop. Drive
through the intersection only when the way is clear (Diagram 2-19).
Uncontrolled intersections
Uncontrolled intersections have no signs or traffic lights. They are usually found in areas
where there is not much traffic. Be extra careful around these intersections. If two
vehicles come to an uncontrolled intersection from different roads at the same time, the
driver on the left must let the driver on the right go first. This is called yielding the right-
of-way.
Yielding the right-of-way
There are times when you must yield the right-of-way. This means you must let another
driver go first. Here are some rules about when you must yield the right-of-way.
Diagram 2-18
At an intersection without signs or lights, you must yield the right-of-way to a vehicle
approaching the intersection before you, and if you arrive at the same time, the vehicle
approaching from the right has the right-of-way (Diagram 2-18).
Diagram 2-19
At an intersection with stop signs at all corners, you must yield the right-of-way to the
first vehicle to come to a complete stop. If two vehicles stop at the same time, the vehicle
on the left must yield to the vehicle on the right (Diagram 2-19).
Diagram 2-20
At any intersection where you want to turn left or right, you must yield the right-of-way. If
you are turning left, you must wait for approaching traffic to pass or turn and for
pedestrians in or approaching your path to cross. If you are turning right, you must wait
for pedestrians to cross if they are in or approaching your path (Diagram 2-20). You
should also check your blind spot for cyclists approaching from behind, particularly in a
bike lane to your right, on a sidewalk or a trail. A yield sign means you must slow down or
stop if necessary and yield the right-of-way to traffic in the intersection or on the
intersecting road.
Diagram 2-21
When entering a road from a private road or driveway, you must yield to vehicles on the
road and pedestrians on the sidewalk (Diagram 2-21).
Diagram 2-22
You must yield the right-of-way and wait for pedestrians to completely cross the road at
pedestrian crossovers (Diagram 2-22) and school crossings with crossing guards.
Remember, signalling does not give you the right-of-way. You must make sure the way is
clear.
Summary
The difference between controlled and uncontrolled intersections and how to safely
navigate them
The concept of right-of-way and common situations where you must yield to other
road users
Stopping
Knowing how to stop safely and properly is an important driving skill. Safe and
responsible drivers see stops ahead, check their mirrors, begin braking early and stop
smoothly. Braking is easier when you sit properly. Use your right foot for both brake and
gas pedals so you won't step on both pedals at the same time or activate your brake
lights unnecessarily. Press the brake pedal firmly and evenly.
In a vehicle with manual transmission, try shifting into a lower gear going down long,
steep hills. This will help control your speed and you won't have to brake as sharply.
Downshift before starting downhill since it may not be possible once you are going
downhill. As a guide, you should be in the same gear going downhill as uphill.
Diagram 2-23
You must come to a complete stop for all stop signs and red traffic lights. Stop at the stop
line if it is marked on the pavement (Diagram 2-23).
Diagram 2-24
If there is no stop line, stop at the crosswalk, marked or not. If there is no crosswalk, stop
at the edge of the sidewalk. If there is no sidewalk, stop at the edge of the intersection
(Diagram 2-24). Wait until the way is clear before entering the intersection.
Stopping at railway crossings
All railway crossings on public roads in Ontario are marked with large red and white “X”
signs. Watch for these signs and be prepared to stop. You may also see yellow advance
warning signs and large “X” pavement markings ahead of railway crossings. Some railway
crossings have flashing signal lights and some use gates or barriers to keep drivers from
crossing the tracks when a train is coming. Some less-travelled crossings have stop signs
posted. Remember it can take up to two kilometres for a train to stop under full
emergency braking. On private roads, railway crossings may not be marked, so watch
carefully.
Diagram 2-25
When you come to a railway crossing, remember:

Slow down, listen and look both ways to make sure the way is clear before crossing
the tracks.
If a train is coming, stop at least five metres from the nearest rail or gate. Do not
cross the track until you are sure the train or trains have passed.
Never race a train to a crossing.
If there are signal lights, wait until they stop flashing and, if the crossing has a gate
or barrier, wait until it rises before you cross the tracks.
Never drive around, under or through a railway gate or barrier while it is down,
being lowered or being raised. It is illegal and dangerous.
Avoid stopping in the middle of railway tracks; for example, in heavy traffic, make
sure you have enough room to cross the tracks completely before you begin.
Avoid shifting gears while crossing tracks.
If you get trapped on a crossing, immediately get everyone out and away from the
vehicle. Move to a safe place and then contact authorities.
Most buses and other public vehicles are required to stop at railway crossings that
are not protected by gates, signal lights or a stop sign. School buses must stop at
railway crossings whether or not they are protected by gates or signal lights. Watch
for these buses and be prepared to stop behind them.
If you are approaching a railway crossing with a stop sign, you must stop unless
otherwise directed by a flagman.
Stopping at school crossings
Diagram 2-26
Where a school-crossing guard displays a red and white stop sign, you must stop before
reaching the crossing and remain stopped until all people, including the school crossing
guard, have cleared the entire roadway and it is safe to proceed. If you have any doubts
about when it is safe to drive forward, wait until all the children and the guard have
cleared the crossing. Drivers who don't follow the stopping requirements may receive a
substantial fine and get three demerit points.
Stopping for school buses
School buses in Ontario come in a range of sizes. All are chrome yellow and display the
words “School Bus.”
You must stop whenever you approach a stopped school bus with its upper alternating
red lights flashing, regardless of whether you are behind the bus or approaching it from
the front. When approaching the bus from the front, stop at a safe distance for children
to get off the bus and cross the road in front of you. If you are coming from behind the
bus, stop at least 20 metres away. Do not go until the bus moves or the lights have
stopped flashing.
Diagram 2-27
Diagram 2-28
If you are on a road with a median strip, only vehicles coming from behind the bus must
stop. (A median is a physical barrier such as a raised, lowered, earth or paved strip
constructed to separate traffic travelling in different directions. Vehicles cannot cross
over a median strip.)
You must obey the school bus law on any road, no matter how many lanes or what the
speed limit. Be prepared to stop for a school bus at any time, not just within school
hours.
As well as the upper alternating red flashing lights, school buses use a stop sign arm on
the driver’s side of the bus. This arm, a standard stop sign with alternating flashing red
lights at top and bottom, swings out after the upper alternating red lights begin to flash.
Remain stopped until the arm folds away and all lights stop flashing.
Note: It is illegal to fail to stop for a stopped school bus that has its red lights flashing. If
you don't stop, you can be fined heavily and get six demerit points for a first offence. In
Ontario, school bus drivers and other witnesses can report vehicles that have illegally
passed a school bus. If you are the vehicle’s registered owner, these fines, but not
demerit points or jail time, may be applied to you.
Watch for school buses near railway crossings. All school buses must stop at all railway
crossings. The upper alternating red lights are not used for these stops, so be alert.
Stopping for pedestrian crossovers
Diagram 2-29
Pedestrian crossovers (Diagram 2-29) are designated areas that allow pedestrians to
safely cross roads where there are no traffic lights. Always watch for pedestrians and
people using wheelchairs at these crossings.
Pedestrians may push a button to make the overhead yellow lights flash to warn drivers
that they will be crossing. Pedestrians should point or make an indication to drivers that
they want to cross before entering the roadway (try making eye contact when possible).
Drivers including cyclists must yield the right-of-way to pedestrians in the crossover. Only
when pedestrians and school crossing guards have crossed and are safely on the
sidewalk can drivers and cyclists proceed. You must not pass any vehicle within 30
metres of a pedestrian crossover.
For more information on pedestrian crossovers visit Driving near pedestrian crossovers
and school crossings (https://www.ontario.ca/page/driving-near-pedestrian-crossovers-
and-school-crossings) .
Summary
Where to position your vehicle when stopping at stop lights and stop signs
The importance of stopping at railway crossings and how to position your vehicle to
stop for them
How and when to stop for school crossings and school buses
How and when to stop for pedestrian crossovers
Changing directions
Before you turn a corner, back up, change lanes or turn around, you need to know what
is beside and behind you. Always check your mirrors and over your shoulder to make
sure the way is clear and you have enough space to complete the move safely.
Turning a corner
To turn a corner, signal well before the turn. When the way is clear, move into the proper
lane, either the far right lane for a right turn or the far left lane in your direction for a left
turn. Signal your turn and look from side to side and check your blind spots to make sure
the way is clear.
Slow down before you enter the turn; the sharper the turn, the slower you should go. To
keep full control of the vehicle, finish braking before you turn the steering wheel.
For a sharp turn, turn the steering wheel with one hand and cross the other hand over it.
Grip the wheel on the other side and continue turning. This is called “hand over hand
steering.” When you have completed the turn, relax your grip on the steering wheel and
let it slip or gently feed it through your hands to return to the straight-ahead position. Do
not turn the steering wheel with one finger or the flat palm of your hand. Gradually
increase speed as you complete the turn.
Remember, drivers often lose control of vehicles and skid because they try to do more
than one thing at a time. Try not to brake and steer at the same time.
Right turns
Diagram 2-30
Unless signs or pavement markings tell you not to, always begin and end a right turn
close to the right side of the road.
To make a right turn, signal well before the turn and move into the right-hand lane when
the way is clear. If the right-hand lane is not marked, keep as far to the right of the road
as possible. Look ahead, left, right and left again before starting to turn. If you have not
seen any smaller vehicles or pedestrians, check your right rear blind spot. Let cyclists,
limited-speed motorcycles, or moped riders go through the intersection before you turn.
When it is safe, complete your turn into the right-hand lane of the road you are entering.
Right turn on a red light
Unless a sign tells you not to, you may make a right turn facing a red light as long as you
first come to a complete stop and wait until the way is clear. Remember to signal your
turn and yield to pedestrians and others using the road.
Left turns
Unless signs or pavement markings tell you not to, always begin and end a left turn in
the far left lane in your direction.
To make a left turn, signal well before the turn and move into the far left lane when the
way is clear. Look ahead, behind, left, right and left again and check your blind spots.
Make your turn when the way is clear.
When you are stopped at an intersection waiting for approaching traffic to clear, don't
turn your steering wheel to the left until you can complete the turn. With your wheels
turned to the left, your vehicle could be pushed into the path of oncoming traffic.
When two vehicles coming from opposite directions meet in an intersection waiting to
turn left, each should turn to the left of the other after yielding the right-of-way to
pedestrians and oncoming traffic.
Motorcycles, bicycles, limited-speed motorcycles and mopeds turn left at intersections in

the same way as larger vehicles. If you are making a left turn behind one of these
vehicles, do not pull up beside it to make your turn at the same time. Stay behind and
turn when the way is clear. Wait for the smaller vehicle to move right before you pass.
The following diagrams show you the correct way to turn left on different types of roads:
Diagram 2-31: Two-way road to a two-way road.
Turn from the lane closest to the centre line to the lane right of the centre line, following
a smooth arc. Then, when you can, move into the right curb lane.
Diagram 2-32: Two-way road to a one-way road.
Turn from the lane closest to the centre line to the left curb lane.
Diagram 2-33: One-way road to a two-way road.
Turn from the left curb lane to the lane just right of the centre line. Then, when you can,
move into the right curb lane.
Diagram 2-34: One-way road to a one-way road.
Turn from the left curb lane to the left curb lane.
Left-turn lanes
Diagram 2-35
Some roads have special lanes for vehicles turning left (Diagram 2-35). At an intersection
where left-turn lanes are marked on the pavement, make your turn from the marked
lane. Keep this lane position as you turn onto the other road.
Diagram 2-36
The centre lane of some roads is used as a two-way left-turn lane (Diagram 2-36). This
lets left-turning vehicles from both directions wait for a chance to turn without holding
up traffic. To use a two-way, left-turn lane, follow these steps:
1. Signal and move into the centre lane shortly before your turn. Slow down.
2. Carefully move forward to a spot opposite the road or driveway where you want to
turn.
3. Make your turn when the way is clear.
Remember that vehicles from the opposite direction also use this lane to turn left. As
they wait in front of you, it may be hard for you to see oncoming traffic. Only go when
you are sure the way is clear. These left-turn lanes are not to be used for passing.
Left turn on a red light
You may turn left from a one-way road to a one-way road on a red light after coming to a
complete stop and making sure the way is clear. Yield to pedestrians and traffic.
Driving through roundabouts
Diagram 2-37
Approaching:
Diagram 2-38
As you approach the roundabout, look for signage to choose your exit. Choose
which lane to use as you would for any other intersection (See Diagram 2-37). Use
the left lane to turn left or to go straight. Use the right lane to turn right or to go
straight. (See Diagram 2-38). Do not enter a roundabout from the right lane if you
want to turn left. Cyclists generally keep to the centre of the appropriate lane, or
dismount and use the roundabout as a pedestrian would. (See Diagram 2-39.)
Slow down and watch for pedestrians on the approach to the yield line at the
entrance of the roundabout. Stay in your lane.
Entering:
Diagram 2-39
Visual checks: Do visual checks of all vehicles already in the roundabout and those
waiting to enter (including cyclists).
Look left: Traffic in the roundabout has the right-of-way. When preparing to enter
the roundabout, pay special attention to the vehicles to your left. Adjust your speed
or stop at the yield sign if necessary.
Adequate gap: Watch for a safe opportunity to enter the roundabout. Enter when
there is an adequate gap in the circulating traffic flow. Don't enter directly beside
another already in the roundabout, as that may be exiting at the next exit.
Travel counter-clockwise: Once in the roundabout, always keep to the right of the
central island and travel in a counter-clockwise direction.
Keep moving: Once you are in the roundabout, do not stop except to avoid a
collision; you have the right-of-way over entering traffic. Do not change lanes while
in the roundabout. If in the inside lane and you miss your exit, you must continue
around until you meet your exit again.
Exiting:
Diagram 2-40
Signal: Be sure to signal your exit and watch for pedestrians.
Maintain your lane: Stay to the left if you entered from the left lane, or stay to the
right if you entered from the right lane.
Maintain your position: Maintain your position relative to other vehicles.
Signal intent to exit: Once you have passed the exit before the one you want, use
your right-turn signal.
Left lane exit: If exiting from the left lane, watch out for vehicles on the right that
continue to circulate around the roundabout.
Dealing with particular situations at a roundabout
Consider large vehicles
Diagram 2-41
Allow extra room alongside large vehicles (trucks and buses). Large vehicles may have to
swing wide on the approach or within the roundabout. Give them plenty of room. See
(Diagram 2-41)
Pull over for emergency vehicles
If you are in a roundabout when an emergency vehicle approaches, exit at your intended
exit and proceed beyond the traffic island before pulling over. If you have not entered the
roundabout yet, pull over to the right if possible and wait until the emergency vehicle has
passed.
Driving a large vehicle in a roundabout
A driver negotiating a roundabout in a large vehicle (such as a truck or bus) may need to
use the full width of the roadway, including the apron (a mountable portion of the centre
island adjacent to the roadway) if provided. Prior to entering the roundabout, the vehicle
may need to occupy both lanes. Give large vehicles plenty of room to manoeuvre.
Note: In some areas of Ontario, older “traffic circles” exist. They are larger than
roundabouts, allowing higher speeds, and force traffic to merge and weave. Modern
roundabouts have a smaller inscribed circle diameter and use splitter islands (to deflect
traffic) at the entry points to slow traffic speeds, or to provide pedestrian refuge. The
entry is also controlled by the “yield to the left” principle; for example, cars circulating
within the roundabout have the right-of-way over entering vehicles.
Backing up
Take extra care and move slowly when backing up (reversing) your vehicle. Before you
begin, check that the way is clear behind you. Be especially careful to look for children
and cyclists.
While firmly holding the steering wheel, put the gear selector in reverse and turn
sideways in your seat to look over your shoulder in the direction you are moving. If you
are reversing straight back or to the right, turn your body and head to the right and look
back over your right shoulder (Diagram 2-42).
Diagram 2-42
If you are reversing to the left, turn your body and head to the left and look over your left
shoulder (Diagram 2-43). Always check the opposite shoulder as well. If you are turning
as you reverse, check that the front end of your vehicle does not hit anything.
You don't have to wear a seatbelt while backing up. If you need to remove your seatbelt
to turn your body to see properly when reversing, do so. But don't forget to buckle up
again before moving forward.
Diagram 2-43
It is illegal to drive in reverse on a divided road that has a speed limit of more than 80
km/h. This applies to the travelled section of the road and the shoulder. The only
exception to this rule is if you are trying to help someone in trouble.
Turning around
You may need to turn around when driving if you miss a turn or go too far along a road.
There are several ways to do this safely.
The simplest and safest way is to drive around the block, but there may be times when
this is not possible. In such cases, a U-turn or a three-point turn may be necessary.
U-turn
Before you make a U-turn, check to make sure there is no sign saying not to.
To make a U-turn safely, you must be able to see well in both directions. It is illegal to
make a U-turn on a curve in the road, on or near a railway crossing or hilltop, or near a
bridge or tunnel that blocks your view. Never make a U-turn unless you can see at least
150 metres in both directions.
To make a U-turn, signal for a right turn, check your mirror and over your shoulder and
pull over to the right side of the road. Stop. Signal a left turn and when traffic is clear in
both directions, move forward and turn quickly and sharply into the opposite lane. Check
for traffic as you turn.
Three-point turn
On narrow roads you need to make a three-point turn to change directions. As shown in
Diagram 2-44, a three-point turn starts from the far right side of the road. Make sure you
do not make a three-point turn on a curve in the road, on or near a railway crossing or
hilltop, or near a bridge or tunnel that blocks your view.
Signal for a left turn. When the way is clear in both directions, move forward, turning the
steering wheel sharply left towards the curb on the far side of the road. When you have
reached the left side of the road, stop. Shift the vehicle into reverse. Signal a right turn.
After checking that the way is still clear, turn the steering wheel sharply to the right, while
backing up slowly to the other side of the road. Stop. Shift to forward gear and check
traffic. When the way is clear, drive forward.
Diagram 2-44
Summary
How to properly turn left or right at intersections
The rules surrounding turns onto and from one way streets
How to navigate a roundabout
Where to look and how to manoeuvre your vehicle when backing up
Methods of turning your vehicle around to travel back in the opposite direction (U-
turns, three-point turns)
Changing positions
Changing your position on the road involves changing lanes or overtaking and passing
another vehicle. Before beginning, be sure you have enough space and time to complete
the move safely.
Changing lanes
Changing lanes is a movement from one lane to another on roads with two or more
lanes in the same direction. You may have to change lanes to overtake another vehicle, to
avoid a parked vehicle or when the vehicle ahead slows to turn at an intersection.
Never change lanes without giving the proper signal and looking to make sure the move
can be made safely.
Here are the steps for making a lane change:
1. Check your mirrors for a space in traffic where you can enter safely.
2. Check your blind spot by looking over your shoulder in the direction of the lane
change. Be especially careful to check for bicycles and other small vehicles. Signal
that you want to move left or right.
3. Check again to make sure the way is clear and that no one is coming too fast from
behind or from two lanes over on a multi-lane road.
4. Steer gradually into the new lane. Do not slow down, maintain the same speed or
gently increase it.
Never make sudden lane changes by cutting in front of another vehicle, including
bicycles. Other drivers expect you to stay in the lane you are already in. Even if you
signal, they expect you to yield the right-of-way.
Avoid unnecessary lane changes or weaving from lane to lane. You are more likely to
cause a collision, especially in heavy traffic or bad weather. Don't change lanes in or near
an intersection. Remember that spending a few seconds behind another vehicle is often
safer than going around it.
Diagram 2-45
Passing
Passing is changing lanes to move past a slower vehicle. While all public roads have
speed limits, not all vehicles travel at the same speed. For example, cyclists, road service
vehicles and drivers ahead that are preparing to turn are usually slower than the through
traffic. You may want to pass some slow-moving vehicles when you are following them.
Never overtake and pass another vehicle unless you are sure you can do so without
danger to yourself or others. Don't pass moving snow plows under any conditions. If in
doubt, do not pass.
Here are the steps for passing a vehicle:
1. Use your left-turn signal to show that you want to pass and check that the way is
clear ahead and behind before moving into the passing lane.
2. Watch for bicycles and small vehicles that may be hidden from view in front of the
vehicle you are about to pass. Also watch for vehicles that may be turning left in
front of you and vehicles or pedestrians entering the road from another road or
driveway.
3. Change lanes only after signalling. After overtaking, signal that you want to move
back into the lane you started from, and when you can see the entire front of the
vehicle you are passing in your inside mirror, make the lane change. Be careful not
to cut off a vehicle by suddenly moving in front of it.
4. If the vehicle you are passing speeds up, do not race. Go back to your original lane.
And do not speed up when another driver is trying to pass you. It is unlawful and
dangerous.
Diagram 2-46
Passing within 30 metres of a pedestrian crossover is not permitted. Passing left of a

centreline is not permitted 30 metres from a bridge, viaduct or tunnel. Don't attempt to
pass when approaching the crest of a hill or on a curve where your vision of oncoming
traffic is obstructed and there is not enough clear distance ahead to pass in safety.
When passing parked vehicles, watch carefully for people suddenly opening doors or for
doors opened to load and unload.
Motorcycles, bicycles, limited-speed motorcycles and mopeds often need to pull to the
left or right side of their lane to avoid dangerous road conditions or to be seen by other
drivers. Do not take this as an invitation to pass in the same lane. If you do want to pass
these vehicles, do so by changing lanes.
When faster traffic wants to pass you, move to the right and let it pass in safety. When
being passed on an undivided road where the passing driver has pulled into the opposite
lane, pay attention to oncoming traffic and move closer to the right side of the lane. Be
prepared to slow down to let the passing driver get in front of you more quickly to
prevent a collision.
On many high-speed roads with three or more lanes in each direction, trucks are not
allowed to drive in the far left-hand lane. This means that the lane next to it is the truck
passing lane. If you are in this lane and a truck wants to pass, move into the right-hand
lane as soon as you can.
Diagram 2-47
Passing at night
Be very careful when you pass other vehicles at night. If you have to pass and the way is
clear, follow these steps:
1. Switch your headlights to low beams as you approach a vehicle from behind.
2. Signal, check your mirrors and blind spot, and pull out to pass. As you move
alongside the vehicle you are passing, switch on your high beams. This will let you
see more of the road ahead.
3. When you can see all of the front of the vehicle you are passing in your rear view
mirror, you are far enough ahead to pull back into the right lane. Remember to
signal.
Passing and climbing lanes
Diagram 2-48
Some roads have special passing or climbing lanes. These lanes let slower vehicles move
into the right-hand lane so that faster ones can pass safely in the left lane.
An advance sign tells drivers they will soon have a chance to pass. Another sign warns
when the lane is ending so drivers in the right-hand lane can begin to merge safely with
traffic in the left-hand lane.
Passing on the shoulder
You may drive on the right shoulder only to pass a vehicle turning left and only if the
shoulder is paved. You may not pass on the left shoulder, paved or not.
Passing on the right
Most passing is done on the left. You may pass on the right on multi-lane or one-way
roads and when overtaking a streetcar or a left-turning vehicle.
Passing on the right can be more dangerous than passing on the left. If you are driving in
the left most lane with a slower vehicle in front of you, wait for the vehicle to move to the
right. Do not suddenly change lanes and pass on the right; the driver in front may realize
you want to pass and move to the right at the same time you do.
Passing streetcars
Diagram 2-49
You must pass streetcars on the right unless you are driving on a one-way road.
At streetcar stops, stay at least two metres behind the rear doors where passengers are
getting off or on. This rule does not apply at stops where an area has been set aside for
streetcar passengers. Always pass these areas at a reasonable speed and be prepared
for pedestrians to make sudden or unexpected moves.
Summary
The safety considerations and the sequence of steps to follow when changing lanes
or passing
How to deal with specific situations when passing (for example, at night, streetcars)
Parking along roadways

Since parking rules change from road to road and place to place, always watch for and
obey signs that say you may not stop or limit stopping, standing or parking. Be aware
that not all parking by-laws are posted on signs.
Here are some basic parking rules:
Never park on the travelled part of a road. Drive off the road onto the shoulder if
you must stop for some reason.
Never park on a curve, hill or anywhere you do not have a clear view for at least 125
metres in both directions.
Do not park where you will block a vehicle already parked or where you will block a
sidewalk, crosswalk, pedestrian crossing or road entrance.
Do not park within three metres of a fire hydrant, on or within 100 metres of a
bridge or within six metres of a public entrance to a hotel, theatre or public hall
when it is open to the public.
Do not park within nine metres of an intersection or within 15 metres if it is

controlled by traffic lights.
Do not park within 15 metres of the nearest rail of a level railway crossing.
Do not park where you will get in the way of traffic or snow clearing.
Never open the door of your parked vehicle without first making sure that you will
not endanger any other person or vehicle or interfere with traffic. Generally, a good
practice is to use the Dutch reach method, meaning you open the driver’s door with
your right hand as this will force a shoulder check at the same time.. Take extra
precautions to avoid opening a door in the path of cyclists, who often ride close to
parked cars (Diagram 2-50). When you must open a door next to traffic, keep it
open only long enough to load or unload passengers.
Diagram 2-50
After parking your vehicle, always turn off the ignition and the lights, remove the key and
lock the door to deter theft. Do not leave children or animals in the vehicle.
Before moving from a parked position, always signal and check for traffic, pulling out only
when it is safe to do so.
Parking for people with disabilities
Diagram 2-51
The Accessible Parking Permit, formerly known as the Disabled Person Parking Permit, is
a laminated card that may be displayed on the dashboard or turned-down sun visor of
any vehicle in which a person with a disability is travelling. The permit entitles the vehicle
in which the person named on the permit is travelling to park in designated disabled
parking, standing and stopping areas. The permit is issued to the permit holder, not a
specific vehicle.
People who have the old version of the permit, the Disabled Person Parking Permit, may
continue to use this permit until it expires. Upon its expiry, any new permit issued will be
the Accessible Parking Permit.
The Accessible Parking Permit is issued free of charge to qualified individuals. To qualify
for an Accessible Parking Permit, a licensed physician, chiropractor, nurse practitioner
(extended class) physiotherapist or occupational therapist must certify that the applicant
has one or more of the conditions detailed on the Accessible Parking Permit application
form.
There are four types of Accessible Parking Permits.
A regular permit (blue) is issued to people with permanent disabilities and is valid
for five years. Until 2011, all individuals will need to be re-certified before renewing
their permit. After that date, only individuals whose condition is deemed “subject to
change” will need to be re-certified before renewing their permit.
A temporary permit (red) is issued when the disability is expected to last more
than two months, but is not a permanent disability. The temporary permit is not
renewable.
A traveller permit (purple) is valid for up to one year and is issued upon request to
individuals who hold a valid Accessible Parking Permit and plan to fly from any
Ontario airport. The permit holder places the traveller permit on the dashboard or
sun visor of their vehicle when leaving it parked at the airport. The person’s regular
permit travels with them.
A company permit (green) is valid for up to five years and is issued to companies
and non-profit organizations that own or lease vehicles used to transport people
with physical disabilities.
Misuse or abuse of an Accessible Parking Permit should be reported to the police. Misuse
of an Accessible Parking Permit will result in fines and revoked privileges. Accessible
Parking Permit applications are available at any Service Ontario Centre or by sending a
request to the ministry at the following address:
Service Ontario
Licence Renewals Unit
P.O. Box 9800
Kingston, ON K7L 5N8
Never park in a space designated for people with disabilities unless you display an
Accessible Parking Permit in the windshield of your vehicle. The permit must belong to
you or one of your passengers. This also applies to standing or stopping at curb areas
reserved for picking up and dropping off passengers with disabilities.
Parallel parking
Parallel parking means parking a vehicle with its wheels parallel and next to the curb or
side of the road. Park parallel to the curb on roads where parking is allowed, unless there
are signs saying that vehicles should be parked at an angle. Park on the right side of the
road in the direction of traffic. Unless there are signs saying otherwise, you can parallel
park on both sides of a one-way road.
Diagram 2-52
To parallel park on the right-hand side of the road, find a space that is about one and
one-half times longer than your vehicle. Check the traffic beside and behind and signal
your wish to pull over and stop. Drive alongside, or parallel to, the vehicle ahead of the
empty space, leaving about a metre between the vehicles. Stop when your rear bumper
is in line with the other vehicle. Follow these steps:
1. Slowly and carefully reverse into the space, turning the steering wheel fully toward
the curb.
2. When you can see the outside rear corner of the vehicle in front of your space,
straighten your wheels as you continue to reverse.
3. Turn the steering wheel fully toward the road to bring your vehicle in line with the
curb.
4. If your vehicle is not parallel to the curb, drive forward to straighten.
5. When you are properly parked, set the parking brake and move the gear selector
into park, or shift into first or reverse gear if your vehicle has a manual
transmission.
6. Turn off the engine. Remember to remove the key from the ignition. Check traffic
before opening your door. Lock your vehicle.
Parking on a hill
When parking facing downhill, turn your front wheels towards the curb or right shoulder.
This will keep the vehicle from rolling into traffic if the brakes become disengaged
(Diagram 2-53 A).
Turn the steering wheel to the left so the wheels are turned towards the road if you are
facing uphill with a curb. The tires will catch the curb if it rolls backward (Diagram 2-53 B).
When facing uphill without a curb, turn the wheels sharply to the right. If the vehicle rolls,
it will go off the road rather than into traffic (Diagram 2-53 C).
When parking on a hill, always set the parking brake and move the gear selector into
park, or shift into first or reverse gear if your vehicle has a manual transmission. Turn off
the engine and remove the key. Check for traffic before opening the door and remember
to lock your vehicle.
Diagram 2-53
Roadside stop
When you need to stop by the side of the road for a short time to check something
outside your vehicle, or to look for directions on a map, for example, follow these
directions:
1. Before slowing down, check your mirrors and blind spot to see when the way is
clear.
2. Turn on your signal before slowing down unless there are vehicles waiting to enter
the road from side roads or driveways between you and the point where you intend
to stop. Wait until you have passed these entrances so that drivers will not think
you are turning before the stopping point.
3. Steer to the side of the road, steadily reducing speed, and stop parallel to the curb
or edge of the road. You should not be more than about 30 centimetres away from
it. Do not stop where you will block an entrance or other traffic.
4. Turn off your signal and turn on your hazard lights.
If your vehicle has an automatic transmission, put the gear selector in park and set the
parking brake. If your vehicle has a manual transmission, set the parking brake and shift
into neutral if not turning off the engine, or shift into low or reverse if turning off the
engine. When parking on a hill, set your wheels against the curb, in the appropriate
direction to keep your vehicle from rolling.
Pulling out from a roadside stop
When pulling out from a roadside stop, do the following:
1. Release the parking brake and move the gear selector to drive or shift into first
gear.
2. Turn off your flashers and turn on your left-turn signal.
3. Just before pulling away from the stop, check your mirrors and blind spot to make
sure the way is clear of vehicles and cyclists.
4. Return to normal traffic speed by accelerating smoothly to blend with the traffic
around you. In light traffic, accelerate moderately. In heavier traffic, you may have
to accelerate more quickly. In a vehicle with manual transmission, shift gears as you
increase speed.
5. Turn off your left-turn signal as soon as you are back on the road.
Summary
Basic parking rules that may not appear on posted street signs
What an Accessible Parking Permit is, and who is eligible to park in spaces
designated for people with disabilities
What parallel parking is and what steps to follow to complete it successfully
How to safely pull over your vehicle for a roadside stop and re-enter traffic
Freeway driving
A freeway - also called an expressway - is a high-speed, multi-lane road. On a freeway,
traffic going in each direction is separated and ramps let vehicles enter and exit. Vehicle
speed is higher on a freeway than on other roads, so driving can be more demanding
and difficult. However, because there are no intersections, bicycles or pedestrians,
freeway driving can be safer for experienced drivers.
New lanes called High Occupancy Vehicle (HOV) lanes are to be used for vehicles carrying
a set minimum number of people. You will need to learn how to recognize markings and
signs for these lanes, and the rules for using them.
New drivers need to learn how to drive with other vehicles around them at low speeds
before trying freeway driving. Class G1 drivers may only drive on freeways with a licensed
driving instructor.
Entering a freeway
There are usually two parts to a freeway entrance: an entrance ramp and an acceleration
lane.
As you move along the freeway entrance ramp, look ahead and check your mirrors and
blind spots to assess the traffic to see where you will move into the nearest freeway lane.
As you leave the ramp you enter the acceleration lane. In the acceleration lane, drivers
increase their speed to the speed of traffic on the freeway before they merge with it.
Signal and increase your speed to merge smoothly with traffic. Freeway drivers should
move over, if it is safe to do so, leaving room for merging vehicles.
A few entrance ramps join the freeway on the left. This means you enter the fastest lane
of traffic first. Use the acceleration lane to match your speed to the traffic, increasing
your speed more quickly.
Diagram 2-54
Driving along a freeway
Once on the freeway, a safe driver travels at a steady speed, looking forward and
anticipating what’s going to happen on the road ahead. Traffic should keep to the right,
using the left lanes for passing.
As in city driving, your eyes should be constantly moving, scanning the road ahead, to
each side and behind. Look ahead to where you are going to be in the next 15 to 20
seconds, or as far ahead as you can see, when you travel at faster speeds. Remember to
keep scanning and check your mirrors frequently.
Stay clear of large vehicles. Because of their size, they block your view more than other
vehicles. Leave space around your vehicle. This will let you see clearly in every direction
and will give you time and space to react. Learn more about
(https://www.ontario.ca/document/official-mto-drivers-handbook/driving-along#section-5)
following distances.
Be careful not to cut off any vehicle, large or small, when making a lane change or joining
the flow of traffic. It is dangerous and illegal for a slower moving vehicle to cut in front of
a faster moving vehicle.
Use the far left lane of a multi-lane freeway to pass traffic moving slower than the speed
limit, but don't stay there. Drive in the right-hand lane when possible. On many freeways
with three or more lanes in each direction, large trucks cannot travel in the far left lane
and must use the lane to the right for passing. Get into the habit of driving in the right
lane, leaving the other lanes clear for passing.
Leaving a freeway
There are usually three parts to a freeway exit: a deceleration lane for slowing down that
leads drivers out of the main flow of traffic, an exit ramp and an intersection with a stop
sign, yield sign or traffic light. When leaving the freeway, signal that you want to move
into the deceleration lane, but do not slow down. When you are in the lane, reduce your
speed gradually to the speed shown for the exit ramp. Check your speedometer to make
sure you are going slowly enough. You may not realize how fast you are going because
you are used to the high speed of the freeway. Losing your ability to judge your speed
accurately is sometimes called speed adaptation or velocitization. It is a special danger
when leaving a freeway. Be prepared to stop at the end of the exit ramp.
Signs telling you that there are freeway exits ahead are far enough in advance for you to
make any lane changes safely. If you miss an exit, do not stop or reverse on the freeway.
Take the next exit.
Diagram 2-55
High Occupancy Vehicle (HOV) Lane
A High-Occupancy Vehicle (HOV) lane is a specially designed lane that is designated for
use by certain types of vehicles with a specified number of occupants. It can offer travel-
time savings to those who choose to carpool or take transit. HOV lanes can move a
greater number of people than a general traffic lane, and encourage carpooling and
transit use by providing travel-time savings and a more reliable trip time. HOV lanes are
open 24 hours a day, seven days a week.
HOV lanes benefit all drivers, not only those who carpool, in the following ways:
Improves highway infrastructure by moving more people in fewer cars
Reduces the number of vehicles on the road
Reduces overall emissions and improves air quality
HOV lanes on provincial highways are reserved for vehicles carrying at least two people
(for example, a driver plus at least one passenger in any of the following passenger
vehicles: cars, minivans, motorcycles, pickup trucks and buses).
The HOV lane is separated from the other general traffic lanes by a striped buffer
zone. It is illegal and unsafe to cross the striped buffer pavement markings.
Certain vehicles are exempt from the HOV lane rules. Buses can use an HOV lane at
any time, regardless of the number of occupants. Emergency vehicles such as
police, fire and ambulance are also exempt from the restrictions.
If you use the HOV lanes improperly, you can be stopped and ticketed by a police
officer. You will be required to re-enter the general lanes at the next entry/exit zone.
Commercial motor vehicles must have two or more people in the vehicle and be
less than 6.5 metres in total length to be in the HOV lane. Single-occupant taxis and
airport limousines are permitted in the HOV lane. Vehicles with the “Green” licence
plate are permitted in the HOV lane with any number of occupants. Green plates
are available for eligible plug-in hybrid electric vehicles and full-battery electric
vehicles. Please consult the Ministry of Transportation website for more details.
Summary
What a freeway is and which road users can and cannot use them
Safe practices to follow when entering, driving along or exiting a freeway
What provincial freeway HOV lanes are and who can use them
Dealing with particular situations
Aggressive driving and road rage
Aggressive-driving behaviours, such as tailgating, speeding, failing to yield the right-of-

way and cutting in front of someone too closely, may cause other drivers to become
frustrated and angry and lead to a road-rage conflict between drivers. An angry driver
may attempt dangerous retaliatory action. Avoid becoming angry on the road by
following these tips:
Know the warning signs of stress and combat them by getting fresh air, breathing
deeply and slowly, and listening to relaxing music.
Make a conscious decision not to take your problems with you when driving.
If you are on a long trip, take a break from driving every few hours.
Don't compete with another driver, or retaliate for what you believe to be
inconsiderate behaviour.
If someone else's driving annoys you, don't try to “educate” the person. Leave traffic
enforcement to the police.
Don't take other drivers' mistakes or behaviours personally.
Avoid honking your horn at other drivers, unless absolutely necessary. A light tap
on the horn is usually sufficient.
Remember that if you drive responsibly and courteously, you are less likely to spark a
road rage situation.
Plan your route in advance. Some of the most erratic and inconsiderate driving
occurs when a driver is lost.
Drive in a courteous and considerate manner.
Yield the right-of-way when it is courteous to do so.
Be polite and let other drivers in front of you when they are signalling that they
would like to do so.
If you make a mistake while driving, indicate that you are sorry. An apology can
greatly reduce the risk of conflict.
Don't return aggression. Avoid eye contact and do not gesture back. Keep away
from erratic drivers.
If you are in a situation in which you feel threatened by another driver, do the following:
Stay in your vehicle and lock the doors.
If you have a cell phone, call police.
Use your horn and signals to attract attention.
If you believe you are being followed, do not drive home. Drive to a police station or
a busy public place.
Street racing
Street racing is one of the most serious and reckless forms of aggressive driving. It shows
a callous disregard for other drivers and road users, and it puts everyone on the road at
serious risk of injury or death. Street racers run the risk of being charged under the
Criminal Code of Canada.
Drowsy driving
Drowsiness has been identified as a causal factor in a growing number of collisions

resulting in injury and fatality. Tired drivers can be as impaired as drunk drivers. They
have a slower reaction time and are less alert.
Studies have shown that collisions involving drowsiness tend to occur during late
night/early morning hours (between 2 a.m. and 6 a.m.) or late afternoon (between 2 p.m.
and 4 p.m.). Studies also indicate that shift workers, people with undiagnosed or
untreated sleep disorders, and commercial-vehicle operators, are at greater risk for such
collisions.
Always avoid driving when you are feeling drowsy. Scientific research confirms that you
can fall asleep without actually being aware of it. Here are eight important warning signs
that your drowsiness is serious enough to place you at risk:
You have difficulty keeping your eyes open.
Your head keeps tilting forward despite your efforts to keep your eyes on the road.
Your mind keeps wandering and you can't seem to concentrate.
You yawn frequently.
You can't remember details about the last few kilometres you have travelled.
You are missing traffic lights and signals.
Your vehicle drifts into the next lane and you have to jerk it back into your lane.
You have drifted off the road and narrowly avoided a crash.
If you have one of these symptoms, you may be in danger of falling asleep. Pull off the
road and park your vehicle in a safe, secure place. Use well-lit rest stops or truck stops on
busy roads. Lock your doors, roll up your windows and take a nap.
Stimulants are never a substitute for sleep. Drinks containing caffeine can help you feel
more alert but, if you are sleep deprived, the effects wear off quickly. The same is true of
turning up the volume of your radio or CD player and opening the window. You cannot
trick your body into staying awake; you need to sleep. Remember, the only safe driver is
a well-rested, alert driver.
Workers on the road
Be extra careful when driving through construction zones and areas where people are
working on or near the road.
When approaching a construction zone, proceed with caution and obey all warning signs,
people and/or devices that are directing traffic through the area. Often, lower speed
limits are posted to increase worker safety and reflect increased road hazards, such as
construction vehicles in the area, uneven or gravel surfaces, narrowed lanes and so on. In
the construction zone, drive carefully and adjust your driving to suit the conditions, do
not change lanes, be ready for sudden stops and watch for workers and related
construction vehicles and equipment on the road.
Other types of workers and vehicles may also be present on the road and pose a hazard,
such as roadside assistance and disable vehicles, surveyors, road maintenance or utility
workers. Always slow down and pass with caution to prevent a collision. If safe to do so,
move over a lane to increase the space between your vehicle and the hazard.
Traffic-control workers direct vehicle traffic in work zones and prevent conflicts between
construction activity and traffic. Whether you are driving during the day or at night, watch
for traffic-control people and follow their instructions.
Treat people working on roads with respect, and be patient if traffic is delayed.
Sometimes traffic in one direction must wait while vehicles from the other direction pass
through a detour. If your lane is blocked and no one is directing traffic, yield to the driver
coming from the opposite direction. When the way is clear, move slowly and carefully
around the obstacle.
Recent changes to the Highway Traffic Act have resulted in doubled fines for speeding in a
construction zone when workers are present. It is also an offence to disobey STOP or
SLOW signs displayed by a traffic-control person or firefighter.
Animals on the road
Crashes involving animals (mainly moose and deer) are a growing problem. Motor
vehicle/wild animal collisions increased from 8,964 in 1999 to 12,791 collisions in 2008.
This represents an increase of 43 per cent over a 10-year period. Many of these collisions
go unreported.
You may encounter domestic, farm or wild animals on the road anywhere in Ontario.
Scan the road ahead from shoulder to shoulder. If you see an animal on or near the
road, slow down and pass carefully as they may suddenly bolt onto the road. Many areas
of the province have animal crossing signs which warn drivers of the danger of large
animals (such as moose, deer or cattle) crossing the road. Be cautious when you see
these signs, especially during dusk-to-dawn hours when wild animals are most active.
To reduce your chances of hitting an animal:
Reduce speed in darkness, rain and fog. These conditions can reduce your ability to
see an animal on or near the road.
Travel at a safe speed and stay alert. Driver inattention and speed are common
factors in animal-vehicle crashes.
Watch for shining eyes at the roadside. If you do see shining eyes, slow down and
be ready to stop.
Keep your windshield clean and headlights properly adjusted.
Use high beams whenever possible and safe to do so, and scan both sides of the
road ahead.
If you see an animal:
Slow down and sound your horn.
Be alert for other animals that may be with the one you've seen.
Don't try to drive around the animal. Animal movements are unpredictable.
If you wish to watch an animal, find a safe place to pull completely off the road and
park first. Do not park on the shoulder of the road, as other drivers may be
distracted by the animal and hit your vehicle.
Stay in your vehicle; getting out increases your chance of being hit by another
vehicle.
If you hit a deer or moose, report it to the local police service or the Ministry of
Natural Resources. Do not try to move an injured animal.
Distracted driving
Driving is a job that requires your full attention every time you get behind the wheel,
even if your vehicle has driver-assistance features. Any secondary activity will detract
from your ability to drive properly and safely. You must reduce distractions and focus on
your driving.
Ontario’s distracted driving laws apply to the use of hand-held

communication/entertainment devices and certain display screens.
While you are driving, including when you are stopped in traffic or at a red light, it is
illegal to:
use a phone or other hand-held wireless communication device to text or dial,

except to call 911 in an emergency
use a hand-held electronic entertainment device, such as a tablet or portable

gaming console
view display screens unrelated to driving, such as watching a video
program a GPS device, except by voice commands
You are allowed to use hands-free wireless communications devices with an earpiece,
lapel button or Bluetooth. You can view GPS display screens as long as they are built into
your vehicle’s dashboard or securely mounted.
Other actions such as eating, drinking, grooming, smoking, reading and reaching for
objects are not part of Ontario’s distracted driving law. However, you can still be charged
with careless or dangerous driving.
Learn more about distracted driving (https://www.ontario.ca/page/distracted-driving) .
Careless driving
You could face charges for careless driving

(https://www.ontario.ca/laws/statute/90h08#BK215) if you endanger other people
because of any kind of distraction. This includes distraction caused by both hand-held
(e.g., phone) or hands-free (e.g., Bluetooth) devices.
You could even be charged with dangerous driving (https://laws-

lois.justice.gc.ca/eng/acts/c-46/page-43.html#h-121308) – a criminal offence that carries
heavier penalties, including long jail terms.
Tips to avoid distracted driving
Use any of these tips to avoid distracted driving and its penalties:
turn off your phone or switch it to silent mode before you get in the car
put it in the glove compartment (lock it, if you have to) or in a bag on the back
seat
before you leave the house, record an outgoing message that tells callers you’re
driving and you’ll get back to them when you’re off the road
some apps can block incoming calls and texts, or send automatic replies to
people trying to call or text you
ask a passenger to take a call or respond to a text for you
if you must respond, or have to make a call or send a text, carefully pull over
to a safe area
silence notifications that tempt you to check your phone
How dangerous is distracted driving?
About 100 people are killed and 16,000 are injured by distracted drivers every year in
Ontario. About one in four of those deaths are vulnerable road users such as pedestrians
and cyclists.
Research shows that young people 16-25 are more likely to drive distracted than any age
group and are the most likely to be killed or injured in a distracted driving collision.
Texting or browsing on your phone takes your eyes off the road and increases your
risk of crashing by 10 times. In fact, a recent study found that drivers who were
texting or changing music on their phones traveled 28 metres further (nearly half a
hockey rink) before responding to a hazard than drivers who were paying attention.
It can be a matter of life and death for a child who runs out on the street
unexpectedly, or a family crossing at a crosswalk. For every 10-year increase in the
driver’s age, drivers were 44% less likely to text, 38% less likely to use a handheld
phone, and 28% less likely to use a hands-free phone.
Emergency vehicles
Emergency vehicles – police, fire, ambulance and special public-utility vehicles – are easily
identified through their use of flashing red or blue lights, a siren or bell, or alternating
flashes of white light from their headlamp high beams. Also, be aware that police, fire
and ambulance services use many different types of vehicles, such as bicycles,
snowmobiles, all-terrain vehicles, motorcycles, buses and trucks.
Reacting to an approaching emergency vehicle
When an emergency vehicle is approaching your vehicle from any direction with its
flashing red or red and blue lights, or siren or bell sounding, you are required to bring
your vehicle to an immediate stop.
When bringing your vehicle to a stop, you are required to bring your vehicle as near as is
practical to the right-hand curb or edge of the roadway. When on a one-way road or
divided highway having more than two lanes of traffic, move to the closest curb or edge
of the roadway. Your vehicle should be parallel to the roadway and clear of any
intersections, including highway on/off ramps. Do not move onto or stop on the shoulder
of the roadway, as emergency vehicles may be travelling along it.
Use extreme caution when stopping your vehicle because other drivers may not yet be
aware of or are already reacting to the approaching emergency vehicle. Look to the front,
both sides and toward the rear of your vehicle, signal your intention to pull over well in
advance and begin to adjust your vehicle's speed to merge with any traffic to the side you
are pulling to. Once you have moved your vehicle to the side, brake gradually as required
and bring your vehicle to a safe stop. Avoid any sudden changes in direction or excessive
braking and be aware of any vehicles approaching fast to the rear of your vehicle.
If you are in an intersection and preparing to make a turn when an emergency vehicle is
approaching, you should abandon the turn and clear the intersection by proceeding
straight when safe to do so, then pull to the right and stop. This will clear the intersection
and minimize the possibility of a collision with the emergency vehicle should it be
passing you on the side you intended to turn towards.
When the emergency vehicle has passed, check to make sure the way is clear and signal
before merging back into traffic. Remain vigilant for additional emergency vehicles, and
remember it is illegal to follow within 150 metres of a fire vehicle responding to an alarm.
Note: Some firefighters and volunteer medical responders may display a flashing green
light when using their own vehicles to respond to a fire or medical emergency. Please
yield the right-of-way to help them respond to an emergency call quickly and safely.
Police or other enforcement officers may require you to pull over and bring your vehicle
to an immediate stop. Typically, the officer may signal this requirement by driving their
vehicle with its emergency lights flashing and/or siren on behind your vehicle or by using
hand gestures from the side of the road. When stopping your vehicle, follow the previous
procedures, except that you should bring your vehicle to a stop outside of traffic lanes
and onto the shoulder of the roadway where possible, or turn and stop on a side street
with less traffic if in the immediate vicinity. If the officer gives direction as to where to
stop, follow the officer's directions.
Stay alert
When you see an approaching emergency vehicle with its lights or siren on, prepare to
clear the way.
React quickly but calmly. Don't slam on the brakes or pull over suddenly. Use your
signals to alert other drivers you intend to pull over.
Check your rearview mirrors. Look in front and on both sides of your vehicle. Allow
other vehicles to also pull over. Pull to the right and gradually come to a stop.
Wait for the emergency vehicle to pass and watch for other emergency vehicles that
may be responding to the same call. Check to make sure the way is clear and signal
before merging back into traffic.
Don't drive on or block the shoulder on freeways. Emergency vehicles will use the
shoulder of the road if all lanes are blocked.
Diagram 2-56
Reacting to a stopped emergency vehicle or tow truck
Diagram 2-57
When approaching any emergency vehicle that is stopped with its red, or red and blue,
lights flashing or a tow truck with its amber lights flashing in the same direction of your
travel, you are required to reduce the speed of your vehicle and proceed with caution.
When reducing your speed, you are required to assess the speed of the surrounding
traffic and the condition of the roadway (such as fog, rain, snow). To ensure safety, brake
early and gradually to allow surrounding traffic to better adjust to a reduced speed and
to ensure you have full control of your vehicle when braking.
If your vehicle has a manual transmission, it is recommended that you use your brakes,
versus shifting down to a lower gear, in order to activate your rear brake lights and
indicate to other drivers that you are slowing down.
When the roadway has two or more lanes of traffic in the same direction of your travel,
you are required to move into a lane away from the emergency vehicle or tow truck, if
safe to do so, in addition to reducing the speed of your vehicle and proceeding with
caution. Similar to the procedures noted above, when slowing down and moving over,
look in front and on both sides of your vehicle, and check your rearview mirrors, to
determine the speed of the traffic around you and condition of the roadway. Proceed to
decrease your speed similar to surrounding traffic speed, use your turn signal prior to
making the lane change, and double check your rearview mirrors and shoulder check
your blind spots to ensure no other vehicles are moving into or approaching that lane
too fast. When safe to do so, change lanes well in advance of an emergency vehicle or a
stopped tow truck with its flashing amber lights. Once in the lane, brake gradually and
continue to reduce the speed of your vehicle when safe to do so. Be aware of any
vehicles approaching fast to the rear of your vehicle.
Tips to remember
Stay alert. Avoid distractions. Keep the noise level down in your vehicle.
Remain calm, and do not make sudden lane changes or brake excessively.
Before changing direction or speed, consider road conditions, check surrounding

traffic, use your mirrors, look to blind spots, and signal and brake early.
Keep roadway shoulders, intersections and highway ramps clear for emergency-
vehicle use.
If your vehicle is being pulled over, in this instance, bring it to a safe stop on the
shoulder of the roadway, away from traffic, following any directions from the
officer.
Failing to respond to an emergency vehicle
Take emergency flashing lights and sirens seriously. Proceed with caution, clear the way
and bring your vehicle to a stop, where required. It's the law. If you don’t stop, you can be
fined and get three demerit points for a first offence. For additional offences, fines
increase and you could also go to jail for up to six months.
Please note the above law, fines and penalties are also applicable to a tow truck with its
lamp producing intermittent flashes of amber light that is stopped on a highway.
Summary
How to manoeuvre your vehicle through construction zones
What to do if you encounter animals on the road
Things that may distract you when driving and how to minimize those distractions
What to do when you encounter an emergency vehicle
Driving at night and in bad weather

At night and in weather conditions such as rain, snow or fog, you cannot see as far
ahead, even with headlights. Slow down when driving at night, especially on unlit roads
and whenever weather conditions reduce your visibility.
Overdriving your headlights
You are overdriving your headlights when you go so fast that your stopping distance is
farther than you can see with your headlights. This is a dangerous thing to do, because
you may not give yourself enough room to make a safe stop. Reflective road signs can
mislead you as well, making you believe you can see farther than you really can. This may
cause you to over-drive your headlights if you are not careful (Diagram 2-58).
Diagram 2-58
Glare
Glare is dazzling light that makes it hard for you to see and be aware what others around
you are doing. It can be a problem on both sunny and overcast days, depending on the
angle of the sun’s rays and your surroundings. Glare can also be a problem at night when
you face bright headlights or see them reflected in your rear view mirror.
When meeting oncoming vehicles with bright headlights at night, look up and beyond
and slightly to the right of the oncoming lights. In daytime glare, use your sun visor or
keep a pair of good quality sunglasses in your vehicle. When you enter a tunnel on a
bright day, slow down to let your eyes adjust to the reduced light. Remove your
sunglasses and turn on your headlights.
Cut down glare at night by following the rules of the road for vehicle lights. Use your low-
beam headlights within 150 metres of an oncoming vehicle or when following a vehicle
within 60 metres. On country roads, switch to low beams when you come to a curve or
hilltop so you can see oncoming headlights and won't blind oncoming drivers. If you can't
see any headlights, switch back to high beams.
Fog
Fog is a thin layer of cloud resting on the ground. Fog can reduce visibility for drivers,
resulting in difficult driving conditions.
The best thing to do is to avoid driving in fog. Check weather forecasts and if there is a
fog warning, delay your trip until it clears. If that is not possible or you get caught driving
in fog, there are a number of safe driving tips you should follow. If visibility is decreasing
rapidly, move off the road and into a safe parking area to wait for the fog to lift.
Tips for driving safely in fog
Before you drive - and during your trip - check weather forecasts. If there is a fog
warning, delay your trip until it clears. If you are caught driving in fog, follow these safe-
driving tips:
DO :
Slow down gradually and drive at a speed that suits the conditions.
Make sure the full lighting system of your vehicle is turned on.
Use your low-beam headlights. High beams reflect off the moisture droplets in the
fog, making it harder to see.
If you have fog lights on your vehicle, use them, in addition to your low beams.
Be patient. Avoid passing, changing lanes and crossing traffic.
Use pavement markings to help guide you. Use the right edge of the road as a
guide, rather than the centre line.
Increase your following distance. You will need extra distance to brake safely.
Look and listen for any hazards that may be ahead.
Reduce the distractions in your vehicle. For example, turn off the cell phone. Your
full attention is required.
Watch for any electronically operated warning signs.
Keep looking as far ahead as possible.
Keep your windows and mirrors clean. Use your defroster and wipers to maximize
your vision.
If the fog is too dense to continue, pull completely off the road and try to position
your vehicle in a safe parking area. Turn on your emergency flashers, in addition to
keeping on your low-beam headlights.
DON’T :
Don't stop on the travelled portion of the road. You could become the first link in a
chain-reaction collision.
Don't speed up suddenly, even if the fog seems to be clearing. You could find
yourself suddenly back in fog.
Don't speed up to pass a vehicle moving slowly or to get away from a vehicle that is
following too closely.
REMEMBER :
Watch your speed. You may be going faster than you think. If so, reduce speed
gradually.
Leave a safe braking distance between you and the vehicle ahead.
Remain calm and patient. Don't pass other vehicles or speed up suddenly.
Don't stop on the road. If visibility is decreasing rapidly, pull off the road into a safe
parking area and wait for the fog to lift.
Use your low-beam lights.
Rain
Rain makes road surfaces slippery, especially as the first drops fall. With more rain, tires
make less contact with the road. If there is too much water or if you are going too fast,
your tires may ride on top of the water, like water skis. This is called hydroplaning. When
this happens, control becomes very difficult. Make sure you have good tires with deep
tread, and slow down when the road is wet.
Rain also reduces visibility. Drive slowly enough to be able to stop within the distance you
can see. Make sure your windshield wipers are in good condition. If your wiper blades do
not clean the windshield without streaking, replace them.
In rain, try to drive on clear sections of road. Look ahead and plan your movements.
Smooth steering, braking and accelerating will reduce the chance of skids Leave more
space between you and the vehicle ahead in case you have to stop. This will also help
you to avoid spray from the vehicle ahead that can make it even harder to see.
Avoid driving in puddles. A puddle can hide a large pothole that could damage your
vehicle or its suspension, or flatten a tire. The spray of water could obstruct the vision of
adjacent motorists and result in a collision, cause harm to nearby pedestrians or drown
your engine, causing it to stall. Water can also make your brakes less effective.
Diagram 2-59
Flooded roads
Avoid driving on flooded roads, water may prevent your brakes from working. If you
must drive through a flooded stretch of road, test your brakes afterward to dry them out.
Test your brakes when it is safe to do so by stopping quickly and firmly at 50 km/h. Make
sure the vehicle stops in a straight line, without pulling to one side. The brake pedal
should feel firm and secure, not spongy, that’s a sign of trouble. If you still feel a pulling
to one side or a spongy brake pedal even after the brakes are dry, you should take the
vehicle in for repair immediately.
Skids
A skid may happen when one or more tires lose their grip with the road’s surface. Skids
most often happen on a slippery surface, such as a road that is wet, icy or covered with
snow, gravel or some other loose material. Most skids result from driving too fast for
road conditions. Hard braking and overly aggressive turning or accelerating can cause
your vehicle to skid and possibly go out of control.
To avoid a skid on a slippery road, drive at a reduced speed and operate the vehicle’s
controls in a smooth and constrained manner. Increasing tire forces, such as by braking
or accelerating while steering may push tires even closer to a skid condition. It’s essential
that the vehicle’s speed be maintained at a safe level and that turns be made gently.
If your vehicle begins to skid, try not to panic - it is possible to maintain control of your
vehicle, even in a skid. Ease off on the accelerator or brake and on a very slippery surface
slip the transmission into neutral if you can. Continue to steer in the direction you wish
to go. Be careful not to oversteer. Once you regain control, you can brake as needed, but
very gently and smoothly.
Anti-lock braking systems (ABS)
If your vehicle is equipped with anti-lock brakes, practise emergency braking to

understand how your vehicle will react. It is a good idea to practise doing this under
controlled conditions with a qualified driving instructor.
ABS is designed to sense the speed of the wheels on a vehicle during braking. An
abnormal drop in wheel speed, which indicates potential wheel lock, causes the brake
force to be reduced to that wheel. This is how ABS prevents tire skid and the
accompanying loss of steering control. This improves vehicle safety during heavy brake
use or when braking with poor traction.
Although anti-lock braking systems help to prevent wheel lock, you should not expect the
stopping distance for your vehicle to be shortened.
Drivers unfamiliar with anti-lock braking may be surprised by the pulsations that they
may feel in the brake pedal when they brake hard. Make sure you know what to expect
so you will not be distracted by the pulsation or tempted to release the pedal during
emergency braking manoeuvres.
Threshold braking
Threshold braking should bring you to a reasonably quick controlled stop in your own
lane, even in slippery conditions. This technique is generally practised in a vehicle that is
not equipped with ABS. Brake as hard as you can until a wheel begins to lock up, then
release pressure on the pedal slightly to release the wheel. Press down on the brake
pedal, applying as much braking force as possible without inducing a skid. If you feel any
of the wheels begin to lock up, release the brake pressure slightly and re-apply. Don't
pump the brakes. Continue braking this way until you have slowed the vehicle to the
desired speed.
Vehicles equipped with ABS should provide controlled braking on slippery surfaces
automatically. Press the brake pedal hard and allow the system to control wheel lock-up.
Snow
Snow may be hard-packed and slippery as ice; rutted, full of hard tracks and gullies; or
smooth and soft. Look ahead and anticipate what you must do based on the conditions.
Slow down on rutted, snowy roads. Avoid sudden steering, braking or accelerating that
could cause a skid. Do not use cruise control during times of snow and other
inclement weather.
Whiteouts
Blowing snow may create whiteouts where snow completely blocks your view of the road.
When blowing snow is forecast, drive only if necessary and with extreme caution.
Tips for driving in blowing snow and whiteout conditions
Before you drive - and during your trip - check weather forecasts and road reports. If
there is a weather warning, or reports of poor visibility and driving conditions, delay your
trip until conditions improve, if possible. If you get caught driving in blowing snow or a
whiteout, follow these safe driving tips:
DO :
Slow down gradually and drive at a speed that suits the conditions.
Make sure the full lighting system of your vehicle is turned on.
Use your low-beam headlights. High beams reflect off the ice particles in the snow,
making it harder to see. If you have fog lights on your vehicle, use them, in addition
to your low beams.
Be patient. Avoid passing, changing lanes and crossing traffic.
Increase your following distance. You will need extra space to brake safely.
Stay alert. Keep looking as far ahead as possible.
Reduce the distractions in your vehicle. Your full attention is required.
Keep your windows and mirrors clean. Use defroster and wipers to maximize your
vision.
Try to get off the road when visibility is near zero. Pull into a safe parking area if
possible.
DON'T :
Don't stop on the travelled portion of the road. You could become the first link in a
chain-reaction collision.
Don't attempt to pass a vehicle moving slowly or speed up to get away from a
vehicle that is following too closely.
REMEMBER :
Watch your speed. You may be going faster than you think. If so, reduce speed
gradually.
Leave a safe braking distance between you and the vehicle ahead.
Stay alert, remain calm and be patient.
If visibility is decreasing rapidly, do not stop on the road. Look for an opportunity to
pull off the road into a safe parking area and wait for conditions to improve.
If you become stuck or stranded in severe weather, stay with your vehicle for
warmth and safety until help arrives. Open a window slightly for ventilation. Run
your motor sparingly. Use your emergency flashers.
Be prepared and carry a winter driving survival kit that includes items such as warm
clothing, non-perishable energy foods, flashlight, shovel and blanket.
It is important to look ahead and watch for clues that indicate you need to slow
down and anticipate slippery road conditions.
Ice
As temperatures drop below freezing, wet roads become icy. Sections of road in shaded
areas or on bridges and overpasses freeze first. It is important to look ahead, slow down
and anticipate ice. If the road ahead looks like black and shiny asphalt, be suspicious. It
may be covered by a thin layer of ice known as black ice. Generally, asphalt in the winter
should look gray-white in colour. If you think there may be black ice ahead, slow down
and be careful.
Snow plows
Snow-removal vehicles on public roadways are equipped with flashing blue lights that
can be seen from 150 metres.
Flashing blue lights warn you of wide and slow-moving vehicles: some snow plows have a
wing that extends as far as three metres to the right of the vehicle. On freeways, several
snow plows may be staggered across the road, clearing all lanes at the same time by
passing a ridge of snow from plow to plow. Do not try to pass between them. This is
extremely dangerous because there is not enough room to pass safely, and the ridge of
wet snow can throw your vehicle out of control.
Summary
How to identify and manage situations where your visibility may be reduced
How weather conditions such as rain, flooded roads, snow and ice may affect your
vehicle and your ability to control it
What to do if your vehicle skids or if you encounter heavy snow, whiteouts or black
ice
How to recognize and share the road with snow removal vehicles
Dealing with emergencies
If you drive often or travel alone, you need to be ready to deal with emergencies. Here
are some suggestions for coping with some common road emergencies.
If your brakes fail
Try pumping the brake pedal to temporarily restore hydraulic brake pressure. If this does
not work, apply the parking brake gently but firmly while holding the release button. It is
a good idea for new drivers to practice a parking-brake emergency stop under controlled
conditions with a qualified driving instructor. Total brake failure is very rare on modern
vehicles. If your brakes do fail and you manage to stop, do not drive away. Call for help.
If your gas pedal sticks
First try to lift the pedal by slipping your foot under it. Do not reach down with your
hands while the vehicle is moving. If this does not work, turn on your hazard lights, shift
to neutral and stop as soon as you safely can, preferably off the road. Turn off the
ignition and do not drive away. Call for help.
If your headlights go out
Check the switch immediately. If the lights stay out, turn on your hazard lights and bring
your vehicle to a safe stop off the road. Call for help. It is dangerous and illegal to drive at
night without lights.
If you have trouble on a freeway
At the first sign of trouble, begin to pull over. Do not wait for your vehicle to stall on the
freeway. Check your mirrors, put on your hazard lights, take your foot off the gas pedal
and pull over to the nearest shoulder as quickly as possible. Never stop in the driving
lanes.
Be careful getting out of your vehicle. If possible, leave through the door away from
traffic. Do not raise the hood.
While you wait for help, stay in your vehicle with the doors locked. If someone stops to
help, ask them to call the police or automobile club for you. If you have a cellular phone,
call for help yourself.
The Queen Elizabeth Way, the 400-series freeways and many other high-speed roads are
patrolled by the Ontario Provincial Police. Stay with your vehicle, and help will arrive
shortly.
If your wheels go off the pavement
Don't panic. Grip the steering wheel firmly. Take your foot off the gas pedal to slow down.
Avoid heavy braking. When the vehicle is under control, steer toward the pavement. Be
prepared to correct your steering and increase speed when your wheels are fully back on
the pavement.
If a tire blows out
Blowouts can cause tremendous steering and wheel vibration, but don't be alarmed.
Take your foot off the gas pedal to slow down and steer the vehicle firmly in the direction
you want to go. Bring the vehicle to a stop off the road.
In a collision where someone is injured
St. John Ambulance recommends that all drivers carry a well-stocked first-aid kit and
know how to use it. Consider reading a book about first aid or sign up for a first-aid
course. It could mean the difference between life and death in a collision.
Every driver involved in a collision must stay at the scene or return to it immediately and
give all possible assistance. If you are not personally involved in a collision, you should
stop to offer help if police or other officials have not arrived.
In a collision with injuries, possible fuel leaks or serious vehicle damage, stay calm and
follow these steps:
Call for help or have someone else call. By law, you must report any collision to the
police when there are injuries or damage to vehicles or other property exceeding
$2,000.
Turn off all engines and turn on emergency flashers. Set up warning signals or
flares, or have someone warn approaching drivers.
Do not let anyone smoke, light a match or put flares near any vehicle, in case of a
fuel leak. If a vehicle is on fire, get the people out and make sure everyone is well
out of the way. If there is no danger of fire or explosion, leave injured people where
they are until trained medical help arrives.
If you are trained in first aid, treat injuries in the order of urgency, within the level of
your training. For example, clear the person's airway to restore breathing, give
rescue breathing or stop bleeding by applying pressure with a clean cloth.
If you are not trained in first aid, use common sense. For example, people in
collisions often go into shock. Cover the person with a jacket or blanket to reduce
the effects of shock.
Stay with injured people until help arrives.
Disabled vehicles on the road may be a danger to you and other drivers. Do what
you can to make sure everyone involved in a collision is kept safe.
In a collision where no one is injured
Follow these steps in a collision where there are no injuries:
1. If the vehicles are drivable, move them as far off the road as possible as this should
not affect the police officer's investigation. This is especially important on busy or
high-speed roads where it may be dangerous to leave vehicles in the driving lanes.
So in a minor collision with no injuries, if you can “Steer it, Clear it”. If you cannot
move the vehicles off the road, set up warning signals or flares far enough away to
give other traffic time to slow down or stop.
2. Call police (provincial or local, depending on where the collision takes place). By law,
you must report any collision to the police when there are injuries or damage to
vehicles or property exceeding $2,000.
3. Give all possible help to police or anyone whose vehicle has been damaged. This
includes giving police your name and address, the name and address of the
registered owner of the vehicle, the vehicle plate and permit number and the
liability insurance card.
4. Get the names, addresses and phone numbers of all witnesses.
5. If damage is less than $2,000, you are still required by law to exchange information
with anyone whose vehicle has been damaged. However, the collision does not
have to be reported to the police.
6. If you have a camera or cell phone with a camera and it is safe to do so, take photos
of the collision scene.
7. If your vehicle must be towed, get the name and licence number of the tow truck
operator and/or company. Make sure you understand where your vehicle is being
towed.
8. Contact your insurance company as soon as possible if you intend to make a claim.
Summary
What to do in emergency situations such as vehicle component failure, driving off

the pavement or vehicle trouble on a freeway
The steps to take if you are involved in a collision with or without injuries
Driving efficiently
Vehicles powered by gasoline and diesel give off air pollutants and gases such as oxides
of carbon, nitrogen and sulphur, hydrocarbons and soot. These pollutants affect the
quality of the air we breathe, our health, crop yields and even the global climate.
Hydrocarbons and oxides of nitrogen react in sunlight to form ground-level ozone, better
known as smog. Smog is a major health hazard responsible for respiratory ailments and
other illnesses. Oxides of sulphur and nitrogen combine with water vapour to form acid
rain, which damages our lakes, forests and crops.
Global warming is the result of too much carbon dioxide and other gases trapping heat
in our atmosphere. Global warming could cause average temperatures to rise, causing
droughts, crop failures, lower water levels and more frequent and severe storms.
A car gives off less carbon dioxide than a larger vehicle, such as an airplane, truck, bus or
train, does. However, because so many people own cars and drive them so often, cars
are responsible for nearly half the carbon dioxide produced by all forms of
transportation. Vehicles that carry large numbers of passengers, such as buses, produce
less carbon dioxide per passenger than cars.
As a driver, you can help to protect the environment from the harmful effects of driving
by following these suggestions. Many of them can also save you money. For further
information visit the Fleetsmart (http://www.fleetsmart.gc.ca) website.
Before you drive
Plan ahead. Combine several errands into one trip.
Avoid driving during rush hours. Driving in off-peak times takes less time, uses less
fuel and releases fewer emissions.
Pay attention to smog alerts. It is especially important to follow these suggestions

on days when smog is bad.
For short trips, consider walking or cycling.
For longer trips, public transit is an environmentally friendly alternative to driving

alone.
Carpool whenever possible. If you want to meet at a central location, there are free
carpool lots in many parts of the province.
While driving
Avoid starting your vehicle unnecessarily. A large burst of pollutants is emitted

when a cold engine is started.
Turn off your vehicle if parked more than 10 seconds. Even in cold weather, vehicle
engines warm up within 30 seconds.
Obey the speed limits. Driving at high speed uses more fuel and increases your
chances of a serious collision.
On the freeway, use your vehicle’s overdrive gear and cruise control for better fuel
efficiency.
Remove unnecessary weight from your vehicle, such as heavy baggage, wet snow
and winter sand or salt.
Maintain your vehicle’s aerodynamics. Remove roof racks and compartments when
not in use. At high speeds, use your vents instead of opening the windows.
Use your vehicle’s air conditioning wisely. Use your windows and vents in city and
stop-and-go traffic. At high speeds, using your air conditioning is usually more fuel
efficient than opening your windows and reducing the vehicle’s aerodynamics.
Don't “top-off” the tank when refueling. Spilled fuel releases harmful vapours.
At the garage
Regular maintenance will keep your vehicle running at maximum efficiency,

reducing the fuel you need to buy and the pollutants your vehicle emits.
Keep your vehicle’s engine well tuned. Worn spark plugs, dragging brakes, low
transmission fluid or a transmission not going into high gear can increase fuel
consumption substantially.
Follow the recommended maintenance schedule in your vehicle owner’s manual to

maximize fuel efficiency.
Have any fluid leaks checked by a specialist to avoid engine damage and harming
the environment.
Keep your tires properly inflated to reduce your fuel bill, emissions and tire wear.
Have your vehicle’s alignment checked regularly to reduce uneven tire wear and
fuel consumption.
(For more information on driving efficiently, see the section on maintaining your vehicle
(https://www.ontario.ca/document/official-mto-drivers-handbook/maintaining-your-vehicle) ).
Drivers are reminded that many collisions occur when the driving environment is less
than optimal. Whether driving at night, during times of reduced visibility or when road
conditions are wet and slippery, drivers are encouraged to use the appropriate safe-
driving tips provided in this handbook.
10 ways you can help make Ontario’s roads the safest in North
America
1. Don't drink and drive. Don't drive when you're taking medication that will affect
your driving.
2. Always wear your seatbelt and make sure passengers are using the appropriate
child car seat,booster seat or seatbelt.
3. Obey the speed limits. Slow down when road and weather conditions are poor.
4. Don't take risks: don't cut people off in traffic, make sudden lane changes or run
yellow lights.
5. Don't drive when you're tired, upset or sick.
6. If you're in doubt, let the other driver go first - yield the right-of-way.
7. Keep at least a two-second space between your vehicle and the one ahead. To
check your distance: start counting when the vehicle ahead passes a fixed object,
stop counting when your vehicle reaches the same spot.
8. Cut the distractions: don't overcrowd the vehicle or play loud music.
9. Always check your blind spot: look in your mirror and over your shoulder before
you change lanes.
10. Check traffic in all directions, including any sidewalks and paths/trails, before
entering an intersection.
Summary
How passenger vehicles affect the environment
Ways to reduce the amount you drive
Ways to conserve fuel and reduce emissions when you drive
Traffic Signs and Lights

Traffic laws include the traffic signs and lights, pedestrian signals and pavement
markings that tell drivers and other road users what they must do in certain situations.
This chapter shows you what many of those signs, lights and markings look like and
explains what they mean to drivers.
Signs (https://www.ontario.ca/document/official-mto-drivers-handbook/signs)
Traffic lights (https://www.ontario.ca/document/official-mto-drivers-handbook/traffic-

lights)
Pedestrian signals (https://www.ontario.ca/document/official-mto-drivers-

handbook/pedestrian-signals)
Pavement markings (https://www.ontario.ca/document/official-mto-drivers-

handbook/pavement-markings)
Signs
Traffic signs give you important information about the law, warn you about dangerous
conditions and help you find your way. Signs use different symbols, colours and shapes
for easy identification.
Here are some of the many signs you will see on Ontario roads:
A stop sign is eight-sided and has a red background with white letters. It means you must
come to a complete stop. Stop at the stop line if it is marked on the pavement. If there is
no stop line, stop at the crosswalk. If there is no crosswalk, stop at the edge of the
sidewalk. If there is no sidewalk, stop at the edge of the intersection. Wait until the way is
clear before entering the intersection.
A school zone sign is five-sided and has a fluorescent yellow/green background with
black symbols. It warns that you are coming to a school zone. Slow down, drive with extra
caution and watch for children.
A yield sign is a triangle with a white background and a red border. It means you must let
traffic in the intersection or close to it go first. Stop if necessary and go only when the
way is clear.
A railway crossing sign is X-shaped with a white background and red outline. It warns that
railway tracks cross the road. Watch for this sign. Slow down and look both ways for
trains. Be prepared to stop.
There are four other kinds of signs: regulatory, warning, temporary conditions and
information and direction.
Regulatory signs
These signs give a direction that must be obeyed. They are usually rectangular or square
with a white or black background and black, white or coloured letters. A sign with a green
circle means you may or must do the activity shown inside the ring. A red circle with a
line through it means the activity shown is not allowed.
Here are some common regulatory signs:
This road is an official bicycle route. Watch for cyclists and be prepared to share the road
with them.
You may park in the area between the signs during the times posted. (Used in pairs or
groups.)
Snowmobiles may use this road.
Do not enter this road.
Do not stop in the area between the signs. This means you may not stop your vehicle in
this area, even for a moment. (Used in pairs or groups.)
Do not stand in the area between the signs. This means you may not stop your vehicle in
this area except while loading or unloading passengers. (Used in pairs or groups.)
Do not park in the area between the signs. This means you may not stop your vehicle
except to load or unload passengers or merchandise. (Used in pairs or groups.)
Do not turn left at the intersection.
Do not drive through the intersection.
Do not turn to go in the opposite direction. (U-turn)
Do not turn right when facing a red light at the intersection.
Do not turn left during the times shown.

This parking space is only for vehicles displaying a valid Accessible Parking Permit.
No bicycles allowed on this road.
No pedestrians allowed on this road.
Keep to the right of the traffic island.
Speed limit changes ahead.
Do not pass on this road.
Slow traffic on multi-lane roads must keep right.
Indicates areas where the community has identified that there is a special risk to
pedestrians. Traffic related offences committed within the zone are subject to increased
fines.
The speed limit in this zone is lower during school hours. Observe the speed limit shown
when the yellow lights are flashing.
Stop for school bus when signals are flashing.
This sign is installed on multi-lane highways with no centre median divider. It informs
drivers approaching from both directions that they must stop for a school bus when its
signal lights are flashing.
These signs, above the road or on the pavement before an intersection, tell drivers the
direction they must travel. For example: the driver in lane one must turn left; the driver in
lane two must turn left or go straight ahead; and the driver in lane three must turn right.
Traffic may travel in one direction only.
This is a pedestrian crossover. Be prepared to stop and yield right-of-way to pedestrians.
This sign, above the road or on the ground, means the lane is only for two-way left turns.
This sign reserves curb area for vehicles displaying a valid Accessible Person Parking
Permit picking up and dropping off passengers with disabilities.
These signs mean lanes are only for specific types of vehicles, either all the time or
during certain hours. Different symbols are used for the different types of vehicles. They
include: buses, taxis, vehicles with three or more people and bicycles.
Keep to the right lane except when passing on two-lane sections where climbing or
passing lanes are provided.
This sign on the back of transit buses serves as a reminder to motorists of the law
requiring vehicles approaching a bus stopped at a dedicated Bus Stop to yield to the bus,
once the bus has signalled its intent to return to the lane.
Road forks to the right.
Marks a zone within which school buses load or unload passengers without using the red
alternating lights and stop arm.
High Occupancy Vehicle (HOV) signs
Only public vehicles such as buses, or passenger vehicles carrying a specified minimum
number of passengers, may use this lane.
Vehicles cannot change lanes into or out of a high-occupancy vehicle lane in this area.
Warning signs
These signs warn of dangerous or unusual conditions ahead such as a curve, turn, dip or
sideroad. They are usually diamond-shaped and have a yellow background with black
letters or symbols.
Here are some common warning signs:
Narrow bridge ahead.
Road branching off ahead.
Intersection ahead. The arrow shows which direction of traffic has the right-of-way.
Roundabout Ahead. Reduce Speed. The counter-clockwise arrows show the direction of
vehicle traffic within the roundabout.
Drivers on the sideroad at the intersection ahead don't have a clear view of traffic.
Pavement narrows ahead.
Slight bend or curve in the road ahead.
Posted under a curve warning, this sign shows the maximum safe speed for the curve.
Sharp bend or turn in the road ahead.
Chevron (arrowhead) signs are posted in groups to guide drivers around sharp curves in
the road.
Winding road ahead.
The bridge ahead lifts or swings to let boats pass.
Paved surface ends ahead.
Bicycle crossing ahead.
Stop sign ahead. Slow down.
Share the road with oncoming traffic.
The share the road sign is used to warn motorists that they are to provide safe space on
the road for cyclists and other vehicles. This sign also warns motorists and cyclists to
exercise additional caution on the upcoming section of road.
Pavement is slippery when wet. Slow down and drive with caution.
Hazard close to the edge of the road. The downward lines show the side on which you
may safely pass.
Divided highway begins: traffic travels in both directions on separated roads ahead. Keep
to the right-hand road. Each road carries one-way traffic.
Right lane ends ahead. If you are in the right-hand lane, you must merge safely with
traffic in the lane to the left.
Traffic lights ahead. Slow down.
Steep hill ahead. You may need to use a lower gear.
Two roads going in the same direction are about to join into one. Drivers on both roads
are equally responsible for seeing that traffic merges smoothly and safely.
Snowmobiles cross this road.
Divided highway ends: traffic travels in both directions on the same road ahead. Keep to
the right-hand road.
Underpass ahead. Take care if you are driving a tall vehicle. Sign shows how much room
you have.
Bump or uneven pavement on the road ahead. Slow down and keep control of your
vehicle.
Railway crossing ahead. Be alert for trains. This sign also shows the angle at which the
railway tracks cross the road.
Sharp turn or bend in the road in the direction of the arrow. The checkerboard border
warns of danger. Slow down; be careful.
Deer regularly cross this road; be alert for animals.
Truck entrance on the right side of the road ahead. If the sign shows the truck on the left,
the entrance is on the left side of the road.
Shows maximum safe speed on ramp.
Watch for pedestrians and be prepared to share the road with them.
Watch for fallen rock and be prepared to avoid a collision.
There may be water flowing over the road.
This sign warns you that you are coming to a hidden school bus stop. Slow down, drive
with extra caution, watch for children and for a school bus with flashing red lights.
Indicates an upcoming bus entrance on the right and vehicles should be prepared to
yield to buses entering the roadway.
Indicates an upcoming fire truck entrance on the right and vehicles should be prepared
to yield to fire trucks entering the roadway.
These signs warn of a school crossing. Watch for children and follow the directions of the
crossing guard or school safety patroller.
Temporary condition signs
These signs warn of unusual temporary conditions such as road work zones, diversions,
detours, lane closures or traffic control people on the road. They are usually diamond-
shaped with an orange background and black letters or symbols.
Here are some common temporary condition signs:
Construction work one kilometre ahead.
Road work ahead.
Survey crew working on the road ahead.
Traffic control person ahead. Drive slowly and watch for instructions.
You are entering a construction zone. Drive with extra caution and be prepared for a
lower speed limit.
Temporary detour from normal traffic route.
Flashing lights on the arrows show the direction to follow.
Pavement has been milled or grooved. Your vehicle's stopping ability may be affected so
obey the speed limit and drive with extra caution. Motorcyclists may experience reduced
traction on these surfaces.
Lane ahead is closed for roadwork. Obey the speed limit and merge with traffic in the
open lane.
Closed lane. Adjust speed to merge with traffic in lane indicated by arrow.
Do not pass the pilot vehicle or pace vehicle bearing this sign.
Reduce speed and be prepared to stop.
Follow detour marker until you return to regular route.
Enforces doubling the HTA fines for speeding in a designated construction zone when
there are workers present.
Information and direction signs
These signs tell you about distances and destinations. They are usually rectangular with a
green background and white letters. Other signs with different colours guide you to
facilities, services and attractions.
Here are some common information and direction signs:
Shows directions to nearby towns and cities.
Shows the distances in kilometres to towns and cities on the road.
Various exit signs are used on freeways. In urban areas, many exit ramps have more than
one lane. Overhead and ground-mounted signs help drivers choose the correct lane to
exit or stay on the freeway.
Advance signs use arrows to show which lanes lead off the freeway. Signs are also posted
at the exit.
Sometimes one or more lanes may lead off the freeway. The arrows matching the exit
lanes are shown on the advance sign in a yellow box with the word ‘exit' under them.
Freeway interchanges or exits have numbers that correspond to the distance from the
beginning of the freeway. For example, interchange number 204 on Highway 401 is 204
kilometres from Windsor, where the freeway begins. Distances can be calculated by
subtracting one interchange number from another.
The term 'VIA' is used to describe the roads that must be followed to reach a destination.
Shows the upcoming roundabout exits and where they will take you.
These signs change according to traffic conditions to give drivers current information on
delays and lane closures ahead.
Shows off-road facilities such as hospitals, airports, universities or carpool lots.
Shows route to passenger railway station.
Shows route to airport.
Shows facilities that are accessible by wheelchair.
D sign – Oversize load
Other signs
Here are some other common signs:

The “slow-moving vehicle” sign is an orange triangle with a red border. It alerts other
drivers that the vehicle ahead will be travelling at 40 km/h or less. When on a road, farm
tractors, farm implements/machinery, and vehicles not capable of sustaining speeds over
40 km/h must display the slow moving vehicle sign. Watch for these slow moving vehicles
and reduce your speed as necessary.
EDR signs are used during the unscheduled closure of a provincial highway when OPP
detour all traffic off the highway. The EDR markers are located along alternative routes
and provide direction to motorists around the closure and back onto the highway.
Long commercial vehicle (LCV)
This placard indicates a long commercial vehicle, which is a double trailer and can be up
to 40 metres in length. It is important to be able to recognize an LCV on the highway,
based on rear signage, and anticipate both the extended length and limited speed when
preparing to pass one on the highway.
Emergency response signs
Some information signs include a numbering system along the bottom of the sign to
assist emergency vehicles and drivers in determining an appropriate route.
Bilingual signs
Watch for these signs when driving in designated bilingual areas. Read the messages in
the language you understand best. Bilingual messages may be together on the same sign
or separate, with an English sign immediately followed by a French sign.
Summary
The difference between regulatory, warning, temporary condition and

information/direction signs
How to read the symbols and messages of some common signs in each category
Traffic lights
Traffic lights tell drivers and pedestrians what they must do at intersections and along
roads. They tell road users when to stop and go, when and how to turn and when to
drive with extra caution.
Green light
A green light means you may turn left, go straight or turn right after yielding to vehicles
and pedestrians already in the intersection. When turning left or right you must yield the
right-of-way to pedestrians crossing the intersection.
Yellow light
A yellow - or amber - light means the red light is about to appear. You must stop if you
can do so safely; otherwise, go with caution.
Red light
A red light means you must stop. Bring your vehicle to a complete stop at the stop line if
it is marked on the pavement. If there is no stop line, stop at the crosswalk, marked or
not. If there is no crosswalk, stop at the edge of the sidewalk. If there is no sidewalk, stop
at the edge of the intersection.
Wait until the light changes to green and the intersection is clear before moving through
it.
Unless a sign tells you not to, you may turn right on a red light only after coming to a
complete stop and waiting until the way is clear. You may also turn left on a red light if
you are moving from a one-way road onto a one-way road, but you must come to a
complete stop first and wait until the way is clear.
Lights and arrows to help turning vehicles
Flashing green lights and green arrows direct drivers who are turning.
Advance green light or arrow
When you face a flashing green light or a left-pointing green arrow and a green light, you
may turn left, go straight ahead or turn right from the proper lane. This is called an
advanced green light because oncoming traffic still faces a red light.
Pedestrians must not cross on a flashing green light unless a pedestrian signal tells them
to.
Simultaneous left turn
When a left-turn green arrow is shown with a red light, you may turn left from the left-
turn lane. Vehicles turning left from the opposite direction may also be making left turns
because they too face a left-turn green arrow.
After the left-turn green arrow, a yellow arrow may appear. This means the green light is
about to appear for traffic in one or both directions. Do not start your left turn. Stop if
you can do so safely; otherwise, complete your turn with caution.
You can still turn left when the light is green, but only when the way is clear of traffic and
pedestrians. If the light turns red when you are in the intersection, complete your turn
when it is safe.
Pedestrians must not cross on a left-turn green arrow unless a pedestrian signal tells
them to.
Transit priority signals
Traffic and pedestrians must yield to public transit vehicles at a transit priority signal. The
round signal is on top of a regular traffic signal and shows a white vertical bar on a dark
background. This allows transit vehicles to go through, turn right or left, while all
conflicting traffic faces a red light.
Fully protected left turn
Some intersections have separate traffic lights for left-turning traffic and for traffic going
through the intersection or turning right.
When a left-turn green arrow appears for traffic in the left-turn lane, traffic going straight
ahead or turning right will usually see a red light. You may turn left from the left-turn
lane when you face a green arrow. Vehicles from the opposite direction may also be
turning left.
After the left-turn green arrow, a yellow light appears for left-turning vehicles only.
After the yellow light, a red light appears for left-turning vehicles only. Traffic going
straight ahead or turning right will face a green light or green arrows pointing straight
ahead and to the right.
In these intersections, you may not begin turning left after the green light appears for
traffic going straight ahead or turning right. If the light turns yellow while you are in the
intersection, complete your turn with caution.
Flashing red light
You must come to a complete stop at a flashing red light. Move through the intersection
only when it is safe.
Flashing yellow light
A flashing yellow light means you should drive with caution when approaching and
moving through the intersection.
Blank traffic lights
During an electrical power loss, traffic lights at intersections will not work. Yield the right-
of-way to vehicles in the intersection and to vehicles entering the intersection from your
right. Go cautiously and use the intersection the same way you would use an intersection
with all-way stop signs.
Traffic beacons
A traffic beacon is a single flashing light hung over an intersection or placed over signs or
on obstacles in the road.
Flashing red beacon
A flashing red beacon above an intersection or stop sign means you must come to a
complete stop. Move through the intersection only when it is safe to do so.
Flashing yellow beacon
A flashing yellow beacon above an intersection, above a warning sign or on an

obstruction in the road, warns you to drive with caution.
Summary
The different colours and symbols that appear on traffic lights and what those
mean
How to navigate turns using advanced green lights and arrows
How to proceed when approaching flashing amber or red lights
What to do in situations where the traffic lights are not operating
Pedestrian signals
Pedestrian signals help pedestrians cross at intersections with traffic lights. The signal for
pedestrians to walk is a white walking symbol. A flashing or steady orange hand symbol
means pedestrians must not begin to cross.
A pedestrian facing a walk signal may cross the road in the direction of the signal. While
crossing, pedestrians have the right-of-way over all vehicles.
A pedestrian facing a flashing or steady hand symbol should not begin to cross the road.
Pedestrians who have already begun to cross when the hand signal appears, should go
as quickly as possible to a safe area. While they are crossing, pedestrians still have the
right-of-way over vehicles.
At intersections with traffic lights where there are no pedestrian signals, pedestrians
facing a green light may cross. Pedestrians may not cross on a flashing green light or a
left-turn green arrow.
Intersection pedestrian signals
Where there are pedestrian push-buttons, a pedestrian must use the button to bring on
the walk signal. Pedestrian signals give people more time to cross than regular traffic
lights. On a busy main road, an intersection pedestrian signal helps people to cross the
road safely by signalling traffic to stop. The intersection pedestrian signal has one or
more crosswalks; pedestrian walk and don't walk signals; push buttons for pedestrians;
and, traffic signal lights on the main road only. Stop signs control traffic on the smaller,
less busy crossroad.
You must observe, obey the traffic rules and use safe driving skills to drive through these
intersections. See also the section on driving through intersections
(https://www.ontario.ca/document/official-mto-drivers-handbook/driving-through-intersections) .
Summary
What the symbols on pedestrian signals indicate
What an intersection pedestrian signal is and what to do if you encounter one
Pavement markings
Pavement markings combine with road signs and traffic lights to give you important
information about the direction of traffic and where you may and may not travel.
Pavement markings divide traffic lanes, show turning lanes, mark pedestrian crossings,
indicate obstacles and tell you when it is not safe to pass.
Yellow lines separate traffic travelling in opposite directions. White lines separate traffic
travelling in the same direction.
Diagram 3-1
A solid line at the left of your lane means it is unsafe to pass. ('A' should not pass.)
Diagram 3-2
A broken line at the left of your lane means you may pass if the way is clear. ('A' may pass
if there are enough broken lines ahead to complete the pass safely.)
Diagram 3-3
Broken lines that are wider and closer together than regular broken lines are called
continuity lines. When you see continuity lines on your left side, it generally means the
lane you are in is ending or exiting and that you must change lanes if you want to
continue in your current direction. Continuity lines on your right mean your lane will
continue unaffected.
Diagram 3-4
A stop line is a single white line painted across the road at an intersection. It shows
where you must stop. If there is no stop line marked on the road, stop at the crosswalk,
marked or not. If there is no crosswalk, stop at the edge of the sidewalk. If there is no
sidewalk, stop at the edge of the intersection.
Diagram 3-5
A crosswalk is marked by two parallel white lines painted across the road. However,
crosswalks at intersections are not always marked. If there is no stop line, stop at the
crosswalk. If there is no crosswalk, stop at the edge of the sidewalk. If there is no
sidewalk, stop at the edge of the intersection.
Diagram 3-6
A white arrow painted on a lane means you may move only in the direction of the arrow.
Diagram 3-7
Pedestrian crossovers are identified by specific signs, overhead yellow lights, and
pavement markings. Pedestrian crossovers are marked by two white double parallel lines
across the road with an X in each lane approaching it.
Drivers and cyclists must stop before the line and yield to pedestrians until pedestrians
have completely crossed the road and cleared the roadway.
Diagram 3-8
Two solid lines painted on the pavement guide traffic away from fixed objects such as
bridge piers or concrete islands. Yellow and black markings are also painted on the
objects themselves as warnings.
Diagram 3-9
Summary
How pavement markings are used to control traffic
What the different colours and types of markings are used to indicate
Keeping Your Driver’s Licence
Ontario has a one-piece driver’s licence. The licence card has a photograph and signature
of the driver. All drivers in Ontario should have a one-piece licence card.
You must carry your licence with you whenever you drive.
Renewing your licence
You will get a renewal application form in the mail. Take the form into any ServiceOntario
Centre in the province. They are all equipped to take photographs. You will be asked to
sign the form, show identification, pay a fee and have your photograph taken. You will
get a temporary licence on the spot if your application and documents are in order, and
your permanent one will be mailed to you. You must carry it with you whenever you drive
and produce it when a police officer requests it.
If you do not get a renewal application form in the mail when your licence is due for
renewal, call the Ministry of Transportation. You are responsible for making sure you
have a valid driver’s licence. You can renew an expired car or motorcycle driver’s licence
within one year without taking any tests.
If your licence has been suspended, cancelled or expired for more than three years, you
will be required to re-apply for a licence in Ontario and meet all the requirements of
graduated licensing, including passing all the required tests.
Senior drivers age 80 or older
Licensing
If you are 80 years of age or older, you are required to renew your driver’s licence every
two years. This renewal process helps keep seniors mobile and independent longer,
while helping to ensure that unsafe drivers are identified and appropriate actions are
taken.
You need to undergo a driving-record review, complete a vision test and participate in a
45-minute group education session, followed by an in-class screening component. The in-
class screening component will help better assess your fitness to drive.
You may be required to pass a road test before being able to renew your licence, or you
may be able to renew but will have to follow up and submit medical information. The
driver improvement counsellor at the group education session will discuss this with you.
There is no charge for any of the licence-renewal requirements. You only have to pay the
licence-renewal fee.
More information that specifically addresses the concerns of senior drivers can be found
at Ontario.ca/seniordriver (https://www.ontario.ca/driving-and-roads/renew-g-drivers-licence-
80-years-and-over) . You can also call the Driver and Vehicle Licensing Contact Centre at
(416) 235-2999 or 1-800-387-3445.
How aging affects driving safety
Reduced vision - especially at night
Difficulty judging distance and speed
Limited movement and range of motion
Slower reaction time
Difficulty focusing attention for long periods of time
Easily distracted
More time needed to understand what you see and hear
More use of prescription and/or over-the-counter drugs that may impair your
driving ability
What you can do to make your driving safer
Your health is a key factor in your ability to drive. To help you handle the demands of safe
driving:
Check with your doctor or pharmacist to make sure current and new medications
will not negatively affect your ability to drive. Over-the-counter drugs and
combinations of drugs can also impair your driving.
Report to your doctor:
vision changes, unexplained dizziness or fainting spells;
frequent, chronic or severe pain.
Avoid driving if you're experiencing pain. It can decrease your ability to concentrate
and limit your movement behind the wheel.
Have your hearing and eyes checked regularly. Peripheral vision and depth
perception tend to decline over the years.
Your doctor can recommend an exercise program to improve flexibility and

maintain strength, which can help your ability to drive safely.
Consider taking a driver’s course to refresh your knowledge of the rules of the road
and safe driving practices.
Ask yourself: How’s my driving?
Take this test and ask yourself these questions:
Am I experiencing an increasing number of near collisions?
Have I been directly involved in minor collisions?
Do I have difficulty driving through intersections, judging distance or seeing

pedestrians, road signs or other vehicles?
Do I have difficulty concentrating while driving?
Do I get lost or disoriented on familiar roads?
Do I have difficulty coordinating hand and foot movements?
Am I experiencing vision problems, especially at night?
Do I get nervous behind the wheel?
Do other motorists frequently honk at me?
Do family members express concern about my driving ability?
How important is driving to me?
Your answers to these questions can help you decide whether to continue to drive, cut
back to certain times such as daylight hours or stop driving altogether. If you have
checked one or more of the warning signs and are concerned about your driving ability,
talk to your doctor or family and get their opinions.
At the group education session, you will learn more about these topics on senior driver
safety.
Graduated licensing requalification
Under graduated licensing, novice drivers (Class G1, G2, M1 and M2) progress through a
two-step licensing process by completing the mandatory time periods for each level and
passing the required road tests. Except for Class M1, novice drivers have five years to
complete the graduated-licensing process. However, if your Class G1, G2 or M2 licence is
about to expire and you have not completed the process, you can regain or retain the
same class of licence by passing a test and paying the five-year licensing fee. This is called
“requalification.” A notice is sent to Class G1, G2 and M2 drivers before their licence
expiry date to inform them of their options. If you do not complete the graduated-
licensing process or requalify before your G1, G2 or M2 licence expires, you will not have
a licence to drive, and you must reapply for a Level One licence.
Changing your name or address
You must tell the Ministry of Transportation within six days of changing your name or
address.
You will need a new licence when you change your address. You can change your address
on the ServiceOntario (http://www.serviceontario.ca) website or you can take the change
of information to a Driver and Vehicle Licence Issuing Office, or mail it to the Ministry of
Transportation, P.O. Box 9200, Kingston, ON, K7L 5K4. The ministry will send you a new
licence. When you get it, destroy your old licence and carry the new one with you
whenever you drive.
When your name changes, you need a new licence. Take the documents you must show
(see the chart on this page) and your current licence to a Driver and Vehicle Licence
Issuing Office. A new photograph will be taken. You will get a temporary licence to use
until your permanent licence is mailed to you. Carry it with you whenever you drive.
There is no charge for getting a new licence because you change your name or address.
The chart on this page shows the documents you will need to change the name on your
driver’s licence.
Driver’s licence laws
It is illegal to:
Lend your licence
Let someone else use it
Use an altered licence
Use another licence as your own
Have more than one Ontario driver’s licence
Use a fictitious or imitation licence
The demerit point system
The demerit-point system encourages drivers to improve their behaviour and protects
people from drivers who abuse the privilege of driving. Drivers convicted of driving-
related offences have demerit points recorded on their records. Demerit points stay on
your record for two years from the date of the offence. If you accumulate too many
demerit points, your driver’s licence can be suspended.
New drivers - demerit-point system for Level One and Level Two drivers
Two or more points
You will receive a warning letter.
Six points
You will receive a second warning letter encouraging you to improve your driving
behaviour.
Nine or more points
Your licence will be suspended for 60 days from the date you surrender it to the Ministry
of Transportation. You can lose your licence for up to two years if you fail to surrender
your licence. After the suspension, the number of points on your record will be reduced
to four. Any extra points could again bring you to the interview level. If you reach nine
points again, your licence may be suspended for six months.
As a Level One or Level Two driver, you will have your licence suspended if you
accumulate nine or more demerit points during a two-year period.
Note: If you are a novice driver and are convicted of violating any novice condition, an
offence that is associated with four or more demerit points or receive a court-ordered
suspension for an offence that would have resulted in four or more demerit points, you
will receive the appropriate penalty and Novice Driver Escalating Sanction licence
suspension. However, the demerit points will be recorded as zero on your record, and
will not be counted towards the accumulated demerit point system.
Fully licensed drivers - demerit-point system for fully licensed drivers
Six points
You will receive a warning letter recommending that you improve your driving skills.
Nine points
You will receive a second warning letter encouraging you to improve your driving
behaviour.
15 points
Your licence will be suspended for 30 days from the date you hand over your licence to
the Ministry of Transportation. You can lose your licence for up to two years if you fail to
surrender it. After the suspension, the number of points on your driver’s record will be
reduced to seven. Any extra points could again bring you to the interview level. If you
reach 15 points again, your licence will be suspended for six months.
Table of offences
Here are the demerit points for driving offences.
Seven points
Failing to remain at the scene of a collision
Failing to stop for police
Six points
Careless driving
Racing
Exceeding the speed limit by 40km/h or more on roads with a speed limit of less
than 80km/h
Exceeding the speed limit by 50 km/h or more
Failing to stop for a school bus
Five points
Driver of bus failing to stop at unprotected railway crossing
Four points
Exceeding the speed limit by 30 to 49 km/h
Following too closely
Failing to stop at a pedestrian crossover
Three points
Exceeding the speed limit by 16 to 29 km/h
Driving through, around or under a railway crossing barrier
Driving while holding or using a hand-held wireless communications/entertainment

device or viewing a display screen unrelated to the driving task
Failing to yield the right-of-way
Failing to obey a stop sign, traffic light or railway crossing signal
Failing to obey traffic control stop sign
Failing to obey traffic control slow sign
Failing to obey school crossing stop sign
Failing to obey the directions of a police officer
Driving the wrong way on a divided road
Failing to report a collision to a police officer
Improper driving where road is divided into lanes
Crowding the driver’s seat
Going the wrong way on a one-way road
Driving or operating a vehicle on a closed road
Crossing a divided road where no proper crossing is provided
Failing to slow and carefully pass a stopped emergency vehicle
Failing to move, where possible, into another lane when passing a stopped
emergency vehicle
Driving a vehicle equipped with a radar detector
Improper use of a high-occupancy vehicle (HOV) lane
Improper opening of a vehicle door
Two points
Failing to lower headlight beam
Prohibited turns
Towing people - on toboggans, bicycles, skis, for example
Failing to obey signs
Failing to share the road
Improper right turn
Improper left turn
Failing to signal
Unnecessary slow driving
Reversing on a highway
Driver failing to wear a seatbelt
Driver failing to ensure infant passenger is secured
Driver failing to ensure toddler passenger is secured
Driver failing to ensure child is secured
Driver failing to ensure passenger under 16 years is wearing seatbelt
Driver failing to ensure that a passenger under 16 years is sitting in a seat that has a
seatbelt
Other ways to lose your licence

To promote safe driving for Ontarians, the province has some of the strictest driving laws
regarding driving while impaired by alcohol or drugs, careless driving, “stunt” driving,
fleeing police or a collision scene, and so on. In addition to lengthy suspensions for
driving offences, court sanctions can quickly escalate and include fines in the tens of
thousands of dollars, reinstatement fees, licence restrictions, lifetime bans and even jail
time.
Suspensions
Your licence may also be suspended for the following reasons:
Escalating sanctions
Zero Blood-Alcohol Concentration (BAC) for novice and young drivers
Medical suspension
Discretionary HTA suspensions
Mandatory HTA suspensions
Administrative driver’s licence suspension (ADLS)
"Warn-range" suspension
Novice-driver violations
Escalating sanctions
Escalating sanctions for novice drivers would apply if any of the following occurrences
have taken place within a five-year period:
Any repeat violations of novice restrictions
Any HTA convictions for four or more demerit points
Court-ordered licence suspensions.
Sanctions – dangerous behaviours
The risk of a fatality or serious injury is almost five times greater for vehicles crashing at
50 km/h or more above the posted highway limit. The increase in risk is even greater on
roads with lower posted limits. For example, on roads with a posted limit of 60 km/h or
less, the risk of a fatality or serious injury is almost eight times greater for vehicles
colliding at 50 km/h or more above the posted limit.
Other types of aggressive driving include:
driving 40 km/h or more above the posted speed limit on roads with a speed limit
less than 80km/h
driving 50 km/h or more above the posted speed limit
driving a motor vehicle to prevent another vehicle from passing
intentionally cutting off another vehicle
street racing
driving stunts
The use of a connected nitrous-oxide system while driving on a highway is prohibited.
For information on the regulation, you can visit the ontario.ca/laws

(https://www.ontario.ca/laws) .
Sanctions – careless driving
Careless driving is defined as: driving without due care, attention or without reasonable
consideration for other persons using the highway; and, anyone, who chooses to put
themselves and other road users at risk by driving aggressively or carelessly. If convicted
of careless driving a driver can face tough sanctions.
Zero Blood-Alcohol Concentration (BAC) for novice and young drivers
All drivers who are 21 and under, regardless of licence class, must have a BAC level of
zero when operating a motor vehicle. You will receive a 24-hour roadside driver-licence
suspension. If convicted, you could face a fine and at least a 30-day licence suspension.
Medical suspension
All doctors must report the names and addresses of everyone 16 years or older who has
a condition that may affect their ability to drive safely (for example, a stroke, heart
condition or dizziness, among others). Doctors report this information to the Ministry of
Transportation, and it is not given to anyone else. Your driver’s licence may be
suspended until new medical evidence shows that the condition does not pose a safety
risk.
Mandatory HTA suspensions
Your licence will be suspended:
If you fail to stop for a police officer (a minimum of five years)
If you don't pay a traffic fine when ordered by the court
Administrative driver’s licence suspension (ADLS)
Your licence will be suspended immediately for 90 days:
If your BAC is more than 80 milligrams in 100 millilitres of blood (.08)
If you fail or refuse to give a breath, blood, oral fluid or urine sample when asked by
police
If you fail or refuse to perform physical co-ordination tests or submit to a drug

evaluation when required by police
This suspension takes effect at the roadside or police station. It is separate from any
criminal charges or prosecution that may also take place.
"Warn-range" suspension
Drivers who register a blood-alcohol concentration in the “warn range” of .05 to .08 pose
an immediate danger to themselves and other road users. If caught driving in the warn
range, you will receive an immediate driver’s-licence suspension at the roadside:
For three days for a first occurrence
For seven days for a second occurrence, and you must undergo a remedial alcohol-
education program
Substantially increased penalties and sanctions for each subsequent occurrence
Novice-driver violations
Drivers holding novice licences must follow the specific rules for their class of licence. If
you violate any of the graduated-licensing conditions, your licence will be suspended for
30 days. This suspension takes effect from the time you surrender your licence. You can
lose your licence for up to two years if you fail to hand it over.
Your licence will be cancelled:
If you fail a driver’s re-examination
If you don't pay your reinstatement fee or administrative monetary penalty

following a suspension
If your cheque for licence fees are not honoured by your bank
If you voluntarily surrender your driver’s licence to the Ministry of Transportation,

or it is surrendered or returned by another jurisdiction
Criminal Code suspensions
You will receive a one-year licence suspension the first time you are convicted of a
Criminal Code offence. Subsequent offences increase substantially to a lifetime ban from
driving. Convictions will remain on your driver’s record for a minimum of 10 years.
Your licence will be suspended if you are convicted of any of the following Criminal Code
offences:
Driving or having care and control of a vehicle, including boats, when your BAC is
more than 80 milligrams per 100 millilitres of blood (.08)
Refusing to submit to a breath test for alcohol
Failing or refusing to provide a breath sample for roadside testing
Failing to remain at the scene of a collision
Dangerous driving
Causing death or bodily harm by criminal negligence
Failing to stop for police
Remedial measures
There are several types of remedial measures. The mandatory Back on Track program is
for all drivers convicted of impaired, driving-related Criminal Code offences. Drivers with
more than one “Warn Range” conviction will be required to take an alcohol-education
and/or alcohol-treatment program. If your driver’s licence has been suspended because
of a Criminal Code conviction, your licence will remain suspended until you have
completed the remedial requirements.
Driving under suspension
You may not drive, under any circumstances, when your licence is suspended. If you are
convicted of driving while your licence is suspended for an HTA offence, you will face fines
in the thousands of dollars. The court may order you to spend up to six months in jail. Six
months will be added to your current suspension as well. If you are found guilty of
driving while your licence is suspended for a Criminal Code offence, you can face fines of
tens of thousands of dollars and spend time in jail.
Driving while prohibited
This is a prohibition order under the Criminal Code conviction. When convicted of
violation of the order, you will get a suspension of one year for a first offence or two
years for a subsequent offence.
Vehicle-Impoundment Program
To counter the dangerous behaviours of impaired and suspended driving, Ontario law
includes seven-day vehicle impoundments for:
Drivers operating a vehicle while under a Highway Traffic Act licence suspension
Drivers caught without a required ignition interlock
All drivers caught with a BAC over .08, or who fail/refuse to comply with a demand
made by a police officer under the Criminal Code of Canada
If you are caught driving while your licence is suspended for a Criminal Code offence, the
vehicle you are driving will be impounded for a minimum of 45 days. These vehicle
impoundments apply regardless of whether the vehicle is borrowed from a friend or
family member, business, employer or is rented. The owner of the vehicle must pay the
towing and storage costs before the vehicle will be released.
The Vehicle-Impoundment Program makes vehicle owners responsible for ensuring that
anyone driving their vehicles is not suspended. People loaning or renting their vehicles
can verify that a driver’s licence is valid by phone or online. You can also get a driver’s
abstract at any Service Ontario centre. There is a nominal fee for each licence checked.
Impaired driving
Driving when your ability is impaired by alcohol or a drug is a crime in Canada. Your
vehicle does not have to be moving; you can be charged if you are impaired behind the
wheel, even if you have not started to drive.
In circumstances involving possible impairment by a drug or a combination of alcohol

and a drug, police can require a driver to:
provide breath samples
perform standardized field sobriety tests
conduct a drug recognition evaluation
provide oral fluid, urine or blood samples for screening
If you fail or refuse to comply with any of these demands, you will be charged under the
Criminal Code.
If you are 21 years of age and under, you must not drive if you have been drinking
alcohol. Your blood- alcohol level must be zero.
For more information on impaired driving measures in Ontario, please visit the Ministry
of Transportation website at: www.mto.gov.on.ca/english/safety/impaired-driving.shtml
(http://www.mto.gov.on.ca/english/safety/impaired-driving.shtml)
Alcohol
The police can stop any driver to determine if alcohol or drug testing is required. They
may also do roadside spot checks. When stopped by the police, you may be told to blow
into a machine that tests your breath for alcohol, a roadside screening device, or perform
physical co-ordination tests.
If you cannot give a breath sample or it is impractical to obtain a sample of breath, the
police officer can require you to provide a blood sample instead. The police may also
require a driver to provide, blood, oral or urine samples. If you fail or refuse to comply
with any of these demands, you will be charged under the Criminal Code.
Drugs
Criminal Code and HTA sanctions apply to drivers impaired by alcohol or a drug. In
circumstances involving possible impairment by drugs or a combination of alcohol and a
drug, police can require a driver to perform physical co-ordination tests and submit to a
drug evaluation, and then require a driver to provide blood, oral fluid or urine samples. If
you fail or refuse to comply with any of these demands, you will be charged under the
Criminal Code.
Some drugs that your doctor may prescribe for you and some over-the-counter drugs
can also impair your driving. Here are some points you should remember:
If you use prescription medicines or get allergy shots, ask your doctor about side
effects such as dizziness, blurred vision, nausea or drowsiness that could affect
your driving.
Read the information on the package of any over-the-counter medicine, including

cold, allergy, sedative or diet pills.
Drugs and any amount of alcohol together can have dangerous effects, even
several days after you have taken the drug.
Do not take a chance; ask your doctor or pharmacist.
Consider the consequences of impaired driving
Ontario leads the way in combating drinking and driving through some of the toughest
laws and programs in North America, including licence suspensions, heavy fines, vehicle
impoundment, mandatory alcohol-education and -treatment programs, and the ignition
interlock program. Depending on your number of prior convictions, you may be fined up
to $50,000, serve time in jail or lose your licence permanently.
For impaired driving that causes injury or death, the penalties are even more severe. If
you are convicted of impaired driving causing bodily harm, you may be sentenced to up
to 14 years in prison. Impaired driving causing death can carry a sentence of
imprisonment for life.
If you drink and drive and are involved in a collision, you may suffer serious injury or
cause serious injury to someone else. Your insurance company might not pay for your
medical or rehabilitation costs, or for the damage to your or the other person’s vehicle.
Your insurance costs may rise significantly. You may have to pay substantial legal costs as
well.
If you are required to drive on the job, a licence suspension could mean losing your
employment.
Driver-improvement interview
The other remedial-measures program is for drivers convicted of non-drinking-and-

driving-related Criminal Code offences who have no previous alcohol-related convictions.
You must undergo a Ministry of Transportation driver-improvement interview.
If you have not completed the driver-improvement interview by the time your Criminal
Code suspension expires, your licence will be further suspended until you have
completed the remedial requirements.
This program also applies to Ontario residents convicted of driving-related Criminal Code
offences in any other province of Canada, or equivalent offences in the states of
Michigan and New York, as well as to out-of-province drivers who are convicted in
Ontario.
Summary
Your responsibility to maintain a valid driver’s licence with the most correct and up-
to-date information
How the demerit-point system works for new and fully licensed drivers
The driving offences that result in a loss of points upon conviction.
Common circumstances where your licence can be cancelled or suspended
How alcohol and drugs affect your ability to drive
The consequences that can result from a suspended licence including

reinstatement fees, remedial measures, ignition interlock, vehicle impoundment
and jail time
Your Vehicle
All motor vehicles on Ontario roads must be registered, insured and maintained to meet
certain basic safety standards. If you own a vehicle, you are responsible for making sure
it meets the requirements. People who buy and sell vehicles also have certain
responsibilities.
Maintaining your vehicle (https://www.ontario.ca/document/official-mto-drivers-

handbook/maintaining-your-vehicle)
Vehicle insurance and registration (https://www.ontario.ca/document/official-mto-

drivers-handbook/vehicle-insurance-and-registration)
Buying or selling a used vehicle (https://www.ontario.ca/document/official-mto-drivers-

handbook/buying-or-selling-used-vehicle)
Towing (https://www.ontario.ca/document/official-mto-drivers-handbook/towing)
Test yourself - Sample knowledge test questions

(https://www.ontario.ca/document/official-mto-drivers-handbook/test-yourself-sample-
knowledge-test-questions)
Maintaining your vehicle

It is illegal to drive a vehicle in dangerous condition. But maintaining your vehicle also
makes sense from an economic point of view: it can mean better gas mileage and a
better price when you sell it. Maintaining your vehicle also helps to protect the
environment.
A police officer or Ministry of Transportation inspector can examine your vehicle, its
equipment and any trailer attached to it, at any time. If the vehicle is found to be unsafe,
it may be taken off the road until the problem is fixed.
The following driver habits and regular maintenance will help keep your vehicle fit and
safe.
Driver Habits
Diagram 5-1
Driver habits are the things that you can do whenever you drive a vehicle. If you identify
any concerns or deficiencies, further investigation or actions, including inspection and
repair by a qualified mechanic, should be considered. The vehicle’s owner manual often
has detailed information on what to look for when inspecting your vehicle and how to
address minor problems.
When approaching your vehicle look for signs of:
Fresh damage
Fluid leaks underneath
Under-inflated or flat tires
Ajar doors, hood, trunk and fuel door/cap
Unsecured loads
Check for ice, snow, or dirt that may interfere with vehicle lighting, steering, driver
visibility, or become a hazard to other motorists should it come free from your
vehicle
From the driver’s seat and before driving, look for:
Unobstructed visibility around entire vehicle
Burned-out or dim headlamps
Illuminated dashboard warning lights during engine start, then going out
Loose objects in the vehicle
While driving, be alert for:
Unusual engine or exhaust noises
Squeaking or grinding noises when applying the brakes
Dashboard warning lights coming on
When planning an extended trip, perform more detailed checks, including:
Windshield wipers and washer-fluid level
Tire pressures, condition and wear
All lights work
Under the hood when the engine is cold; oil and coolant levels, obvious defects with
belts, hoses, and possible leaks. Using the vehicle owner’s manual for more
information on what to look for
Having your vehicle thoroughly inspected by a qualified mechanic
Regular Maintenance
In order to keep your vehicle running smoothly, vehicle manufacturers often establish a
schedule for regular maintenance. Scheduling of this work is normally based upon
accumulated vehicle mileage or time intervals (whichever comes first). Further details
may be found in the vehicle’s owner’s manual. Regular maintenance may include oil and
filter change, other fluid checks and changes, air and fuel filter replacement, tire rotation
and brake inspection. Periodically, more intensive mechanical servicing such as engine
adjustments and timing-belt replacement may be required.
Winter maintenance
A well-maintained vehicle will usally start in all weather conditions.
Carry emergency supplies. These should include:
a shovel
booster cables
emergency flares or warning lights
a blanket
a chain for towing.
Always carry extra windshield washer fluid in the winter and refill the container when
necessary.
Faulty exhaust systems are especially dangerous in the winter when drivers are more
likely to drive with windows and vents closed. Have your exhaust checked if it sounds
noisy or rattles.
Tires
Diagram 5-2
The type of tires you have and the way they are made are critical for good traction,
mileage and safety. Keep these points in mind when you buy or replace tires, and check
your vehicle owner’s manual or the tire manufacturer’s guide for recommendations.
Tires must meet standards described in the Canadian Motor Vehicle Safety Act. Tires
deteriorate with age, even when not in use. Aged tires have reduced traction, are more
prone to cracking and may fail unexpectedly while in use. Tires should not be older than
10 years.
Replace tires when the tread is less than 1.5 millimetres deep or when tread-wear
indicators touch the road. Vehicles that weigh more than 4,500 kilograms must
replace their front tires when tread is less than three millimetres deep.
Replace tires that have bumps, bulges, knots, exposed cords or tread and sidewall
cuts deep enough to expose cords.
Any tire on a vehicle must not be smaller than the vehicle manufacturer’s specified
minimum size. And it must not be so large that it touches the vehicle or affects its
safe operation.
You should use similar tires on all four wheels of your vehicle.
To provide the best traction during the winter season, it is recommended that your
vehicle be equipped with four winter or all-weather tires with the same tread
pattern.
If you live in northern Ontario, you can legally use studded tires on your vehicle.
Scrap tires are a serious environmental concern. Proper maintenance will extend
the life of a tire and delay its disposal. Some tips for longer wear: maintain the right
air pressure; inspect tires for wear; rotate tires regularly and practice good driving
habits.
Vehicle insurance and registration
Auto insurance – it’s the law!
Ontario has compulsory automobile insurance. This means every vehicle registered in
the province must be insured.
You must show proof that you have insurance coverage before you can register a vehicle
or renew your registration. The Financial Services Regulatory Authority of Ontario (FSRA),
regulates insurance in Ontario. Visit FSRA's website (https://www.fsrao.ca/) for more
information on auto insurance.
Registration
Vehicle registration includes licence plates and a vehicle permit.
Licence plates in Ontario are based on a plate-to-owner system. This means that vehicle
licence plates move with the vehicle owner, not the vehicle. When you sell or change
vehicles, you must remove your plates.
If you do not intend to use them on another vehicle, you may return your plates to a
ServiceOntario centre.
Learn more about buying, selling and registering a vehicle.

(https://www.ontario.ca/page/register-vehicle-permit-licence-plate-and-sticker)
New residents
New Ontario residents have 30 days to register their vehicles. To get a permit and
Ontario licence plates, go to a ServiceOntario centre. You must bring along:
A safety standards certificate
Proof of insurance
Vehicle Import Forms, if you have brought the vehicle in from another country
The vehicle permit, or ownership, from where you used to live
Protect yourself from auto insurance fraud
By being vigilant, Ontario drivers can help put a stop to fraudsters who abuse the
automobile insurance system. Keep this in mind to protect yourself from auto insurance
fraud.
When Buying Auto Insurance:
Use a licensed insurance company, agent or broker. The Financial Services

Regulatory Authority of Ontario (FSRA), an agency of the Ministry of Finance,
regulates insurance in Ontario. Visit FSRA’s (https://www.fsrao.ca/) website, to check
whether an insurance company or agent is licensed. The Registered Insurance
Brokers of Ontario (RIBO) is the self-regulatory body for insurance brokers in
Ontario. Visit RIBO’s (http://www.ribo.com) website, to check whether an insurance
broker is licensed.
After an Auto Collision:
Collect as much information as possible. Take photos of the collision scene. Get the
names, addresses, phone numbers, licence plate and driver’s licence numbers, and
insurance information from all those involved in the collision, including passengers
in the other vehicle(s).
Be suspicious of referrals. Be wary if you are pressured or offered money by a tow

truck operator to go to a particular body shop, lawyer, paralegal or health-care
provider. Contact your insurance company for information on towing and where to
take your vehicle to be repaired.
Refuse to sign blank forms in advance of receiving any services or health-care

treatment related to your collision.
Demand detailed repair and medical bills for any goods and services related to your
collision, and review them carefully.
Visit the Financial Services Regulatory Authority of Ontario (FSRA) website

(https://www.fsrao.ca/) for information on how to avoid, detect and report auto insur-
ance fraud.
Towing
This chapter tells you what you need to know to tow a trailer behind a car, van or small
truck in Ontario. This includes licence and registration requirements, trailer size and
characteristics, as well as safety tips to follow when towing a trailer.
Before you attempt to tow a trailer, consider the size, power and condition of your
vehicle. Make sure it is capable of towing both the trailer and the load you intend to
carry, and that your trailer and hitch meet all the requirements described in this chapter.
Towing a trailer brings unique challenges to drivers. Almost half of the reported collisions
while towing a recreational vehicle are single-vehicle collisions. Another 20 per cent
involve rear-end collisions. In collisions where the driver was determined to be at fault,
about 30 per cent of the drivers had “lost control” of their vehicle.
Licence and permit
You must have a valid driver's licence (Class G1, G2 or G) or higher class of licence to tow
a trailer with a gross vehicle weight of up to 4,600 kilograms. If your trailer and load
exceeds the size and weight specified in the Highway Traffic Act, you may need a higher
class of licence or an oversize vehicle permit to tow it. For questions about the
Oversize/Overweight Program, please contact the Ministry of Transportation’s permit
office: by telephone 416-246-7166 or Toll-free: 1-800-387-7736 or visit the
Oversize/Overweight Permit Office website (https://www.ontario.ca/page/get-
oversizeoverweight-permit) .
It is against the law to tow more than one trailer behind non-commercial vehicles.
Registering your trailer
A trailer is considered a separate vehicle. Before you can tow one on any public road, you
must register it and pay a one-time registration fee at a ServiceOntario centre. When you
register your trailer you will receive a licence plate and vehicle permit. Attach the licence
plate to the back of your trailer where it is clearly visible. Always carry your permit, or a
copy of it, to show to a police officer when asked.
Make sure your trailer is in good condition
Your trailer must be in safe operating condition. If it is not, a police officer may remove
your trailer from the road until it is made safe to operate.
Brakes
If your trailer has a gross trailer weight, vehicle and load of 1,360 kilograms or more, it
must have brakes strong enough to stop and hold the trailer.
Lights
Your trailer must have:
a white licence plate light
a red tail light
two red reflectors at the rear of the trailer, as far apart as possible
If your trailer is wider than 2.05 metres, it must also have:
two yellow clearance lights, one on each side at the front of the trailer, as far apart
as possible, to let drivers coming toward you know the width of your trailer
two red clearance lights, or reflectors, one on each side at the rear of the trailer, as
far apart as possible, to let drivers behind you know the width of your trailer
Your trailer must have mud guards, fenders and flaps or be designed in such a way that it
does not spray or splash traffic travelling behind you.
If the load in your trailer blocks your vision to the rear, you must have additional mirrors
that provide a clear view of the road to the rear. Load your trailer carefully so that
nothing comes loose or falls off while you are moving.
Attaching your trailer
Your trailer must have two separate ways of attaching to your vehicle so that if one fails
or comes loose, the trailer will stay attached.
If safety chains are used, they must be crossed under the tongue to prevent the tongue
from dropping to the road if the primary hitch accidentally disconnects. The chain hooks
must have latches or devices that will not accidentally become detached.
No passengers
You may not carry any person in any trailer, including a house or boat trailer, when it is
being towed.
Trailer hitch
Use a good-quality trailer hitch. The class of trailer hitch you use depends upon the gross
weight of your trailer - the gross weight being the total weight of the trailer and its load.
Make sure you use the right trailer hitch for the weight of your trailer. It should be
securely attached to your vehicle following the manufacturer's recommendations.
The hitch-ball should be installed so that when the trailer is attached and tightened, it is
level with no tilting. If the hitch pulls down the rear of your vehicle, you may need to use
a load-equalizing trailer hitch. You may also be able to shift some of the load in the trailer
to the rear to reduce the load on the rear of your vehicle.
In addition to a ball and hitch, be sure to use safety chains or cables strong enough to
hold the trailer and load, in case the ball and hitch accidentally come apart.
Loading your trailer
Diagram 5-4-1
When loading your trailer, strap everything down inside, as well as outside. It is an
offence to have a load that may become dislodged or fall off. Do not overload your
trailer. Too much weight in the trailer can put a strain on your vehicle and damage your
tires, wheel bearings and axle. When carrying a boat on a trailer, do not carry cargo in the
boat unless your trailer is designed and equipped for the extra weight.
The distribution of the weight in your trailer is also very important. Generally, more of the
trailer load should be in front of the trailer axle than behind it for proper hitch weight.
About five to 10 per cent of the trailer's total weight should be supported on the hitch,
within the weight limit marked on the hitch. Poor load balance can cause your trailer to
sway or fishtail. The ball and hitch may also become separated, especially if there is too
much weight in the rear of the trailer.
Heavy and improperly placed loads can pull down the rear of your vehicle, lifting the
front end and affecting your steering, especially in wet and slippery conditions. It may
also affect the aim of your headlights so that your low beams blind approaching drivers.
The alignment of your mirrors may also be affected.
Starting out
Before each trip, check the trailer hitch, wheels, tires, lights, load distribution and load
security to make sure they are safe. Check your tire pressure with the trailer loaded while
the tires are still cold. When you start to drive, accelerate carefully. Drive slowly and
carefully.
Curves and turns
Stay close to the middle of your lane when taking a curve. When making a right turn,
check traffic. Look in your right mirror. Signal and slow down. If the turn is sharp, move
ahead until your vehicle's front wheels are well ahead of the curb before turning to the
right.
When making a left turn, check traffic. Signal. Proceed slowly. When you make your turn,
swing wide by driving well into the intersection before turning.
Slowing down and stopping
A sudden stop can cause your trailer to jackknife or slide sideways or the load to shift. To
avoid sudden stops, increase the following distance between you and the vehicle ahead.
Keep out of the fast lanes and maintain a speed that will allow you to slow down and
stop smoothly in any situation.
Passing
You cannot accelerate as quickly when you are towing a trailer. You also need more space
because the length of your vehicle is much longer with a trailer attached. Before you
pass, make sure you have enough time and room to complete the pass. Once you have
passed, allow more room before you move back to your lane. Do not cut back into the
lane too soon. This can cause your trailer to sway and make it difficult to control.
Being passed
If you are holding up a line of traffic, signal, pull over and let the other vehicles pass. Fast-
moving trucks and buses create a strong air disturbance behind them. If a large bus or
truck passes you, the wall of wind behind it may whip your trailer to the side, pushing it
out of control. When you experience this, do not brake. Carefully steer your vehicle and
trailer back into position. A slight increase in speed may help.
Backing up
Back up very slowly and have someone outside the vehicle direct you. Use a series of
small turns to steer. It is a good idea to practise this skill off the road in an empty parking
lot until you are comfortable with your ability.
To back up to the right, steer to the left. The front end of the trailer will go left, but the
rear end will go right. To back up to the left, steer to the right. The front end of the trailer
will go right, but the rear end will go left.
Towing disabled vehicles
If your vehicle breaks down, you should get help from a tow truck designed to tow
vehicles. If you must use another vehicle to tow, use warning signals or emergency
flashers and make sure you attach the vehicles securely. Someone must sit in the
disabled vehicle and use the brakes to keep the tow cable tight. If the engine cannot run,
don't tow vehicles that have power braking and steering. Without the engine, braking and
steering is difficult and towing may lead to a collision.
Trying to start a disabled vehicle by towing is dangerous and could damage both vehicles.
Summary
The checks that need to be performed on your vehicle: daily/weekly, at its regular
servicing and for its use in the winter
How to buy the right tires for your vehicle and how to know when they need
replacing
Your responsibility to ensure that the vehicle you are driving is properly registered
and insured
Information about buying and selling used vehicles including the safety standards
certificate
Licensing requirements to properly tow a trailer or disabled vehicle
Vehicle requirements such as brakes, lights, mirrors and trailer hitches
The proper way to load a trailer and attach it to your vehicle
Driving techniques for driving with a trailer attached
Test yourself - Sample knowledge test

questions
The following questions will give you an idea of what to expect on the knowledge test. All
knowledge-test questions follow this multiple-choice format. The answers to these
sample questions are provided at the bottom of the page.
1. To get your vehicle out of a skid, you should first:
a. a. Steer straight ahead.
b. a. Steer in the opposite direction of the skid.
c. a. Steer in the direction you want to go.
d. a. Apply brakes hard.
2. When may you lend your driver’s licence?
a. a. In emergencies.
b. a. To a person learning to drive.
c. a. It is not permitted.
d. a. For identification purposes.
3. What must a driver do before entering a highway from a private road or

driveway?
a. a. Enter or cross the highway as quickly as possible.
b. a. Yield right-of-way to all vehicles approaching on the highway.
c. a. Sound horn and proceed with caution.
d. a. Give hand signal then take right-of-way.
4. Never change lanes in traffic without:
a. a. Looking in the rear view mirror only.
b. a. Giving proper signal and looking to make sure the move can be made safely.
c. a. Blowing your horn and looking to the rear.
d. a. Decreasing speed and giving correct signal.
5. When the driver of another vehicle is about to overtake and pass your vehicle,
you must:
a. a. Speed up so that passing is not necessary.
b. a. Move to the left to prevent passing.
c. a. Signal to the other driver not to pass.
d. a. Move to the right and allow such vehicle to pass.

6. When you are deciding whether or not to make a U-turn, your first consideration
should be to check:
a. a. Traffic regulations.
b. a. Presence of trees, fire hydrants or poles near the curb.
c. a. Turning radius of your car.
d. a. Height of curb.
7. It is more dangerous to drive at the maximum speed limit at night than during
daytime as:
a. a. Your reaction time is slower at night.
b. a. You cannot see as far ahead at night.
c. a. Some drivers unlawfully drive with parking lights only.
d. a. The roadways are more apt to be slippery at night.
8. You should under all conditions drive at a speed which will allow you to:
a. a. Stop within 150 metres (500 feet).
b. a. Stop within 90 metres (300 feet).
c. a. Stop within 60 metres (200 feet).
d. a. Stop within a safe distance.
Answer Key: 1-c, 2-c, 3-b, 4-b, 5-d, 6-a, 7-b, 8-d
The Level Two Road Test

Statistics show that new drivers of all ages are far more likely than experienced drivers to
be involved in serious or fatal collisions.
To help new drivers develop better, safer driving habits, Ontario introduced graduated
licensing in 1994 for all drivers applying for their first car or motorcycle licence.
Graduated licensing lets you gain driving skills and experience gradually, in lower-risk
environments. The two-step licensing system takes at least 20 months to complete and
includes two road tests. Passing the Level Two (G2) road test gives you full Class G driving
privileges.
While the Level One road test deals with basic driving skills, the Level Two deals with
advanced knowledge and skills that are generally gained with driving experience. When
you take the test, the examiner will give you directions. As you complete the driving
tasks, the examiner will watch to make sure you successfully perform the actions
associated with them.
The G2 road test includes a component of expressway driving. To proceed, you must
complete and sign a “Declaration of Highway Driving Experience” to ensure that you have
sufficient expressway driving experience to complete this component. On the form, you
will indicates how many times in the three months before the road test you have driven
on a freeway and/or a highway with a speed limit of at least 80 km/h. You are required to
indicate what was the average length of these trips (for example, under 5 kilometres,
between 5 and 15 kilometres, over 15 kilometres). Freeways include: 400, 401, 402, 403,
404, 405, 406, 407, 409, 410, 416, 417, 420, 427, Queen Elizabeth Way, Don Valley
Parkway, Gardiner Expressway, E. C. Row Expressway and the Conestoga Parkway. If you
do not have sufficient highway driving experience, the examiner must declare the road
test “out-of-order” and cancel it. You will lose 50 per cent of your prepaid road-test fee. In
order to reschedule, you will have to pay the 50 per cent of the road-test fee lost through
the out-of-order. Make sure you obtain the required highway driving experience before
rescheduling your test.
To help you prepare, this chapter tells you the various tasks and actions that you will be
expected to perform in your Level Two road test. This is only a guide. For more
information on the driving tasks, you should review chapters 2 and 3.
To help clear the backlog of in-vehicle passenger road tests resulting from COVID-
19 restrictions and closures, the G road test has been temporarily modified.
Until further notice, the G road test will not include these elements that are already
covered in the G2 road test:
parallel parking
roadside stops
3-point turn
driving in residential neighbourhoods
The test will still include all of the fundamental elements such as:
driving on major roads and expressways including merging on and off,

maintaining appropriate speed and space, signalling and more
turns, curves and lane changes
intersections
driving in business areas
Learn more about what’s included in the G road test

(https://www.ontario.ca/document/official-mto-drivers-handbook/level-two-road-
test) .
Left and right turns
Diagram 6-1-1
The approach
This driving task begins when the examiner tells you to make a left or right turn, and
ends at the point just before you enter the intersection. Make sure you take the following
actions:
Traffic check
Before slowing down, look all around you. Use your rearview and side mirrors to check
traffic behind you. If you change lanes, remember to check your blind spot by looking
over your shoulder.
Lane
Move into the far left or far right lane as soon as the way is clear.
Signal
Turn on your signal before slowing down for the turn, unless there are vehicles waiting to
enter the road from side roads or driveways between you and the intersection. Wait until
you have passed these entrances so that drivers will not think you are turning before the
intersection.
Speed
Steadily reduce speed as you approach the turn. In a vehicle with manual transmission,
you may downshift into a lower gear as you slow down. Do not coast with your foot on
the clutch pedal.
Space
While slowing down, keep at least a two to three-second distance behind the vehicle in
front of you.
If stopped
You will need to do this driving task if you cannot complete your turn without stopping,
either because the way is not clear or you face a stop sign or red traffic light. Remember
to follow these actions:
Stop
Come to a complete stop. Do not let your roll forward or backward. When traffic
conditions allow, move forward to check that the way is clear or to start the turn. If you
have to stop after you have passed the stop line, do not back up.
Space
When stopped behind another vehicle at an intersection, leave enough space to pull out
and pass without having to back up. Leaving this space protects you in three ways: it lets
you pull around the vehicle in front if it stalls; it helps prevent you from being pushed
into the vehicle ahead if you are hit from behind; and it reduces the risk of collision if the
vehicle ahead rolls backward or backs up.
Stop line
If you are the first vehicle approaching an intersection with a red light or stop sign, stop
behind the stop line if it is marked on the pavement. If there is no stop line, stop at the
crosswalk, marked or not. If there is no crosswalk, stop at the edge of the sidewalk. If
there is no sidewalk, stop at the edge of the intersection.
Wheels
When waiting to make a left turn, keep your front wheels straight. With your wheels
turned left, your vehicle could be pushed into oncoming traffic. When waiting to turn
right, keep the wheels straight if there is a risk of being pushed into pedestrians crossing
the intersection. At a large intersection with curved sidewalks where you are turning
right, angle your vehicle to follow the curb so that no other vehicle can fit between you
and the curb.
Making the turn
The driving task involves your actions as you make the turn. Remember to do the
following:
Traffic check
If you are stopped, waiting for a green light or for the way to be clear, keep checking
traffic all around you. Just before entering the intersection, look left, ahead and right to
check that the way is clear. If there is any doubt about the right-of-way, try to make eye
contact with nearby drivers or pedestrians. If it is possible for another vehicle to overtake
you while you are turning, check your blind spot before starting to turn. You have not
properly checked traffic if another vehicle or pedestrian has the right-of-way and must
take action to avoid your vehicle.
Both hands
Use both hands to turn the steering wheel throughout the turn. You are most at risk from
other traffic when turning. Using both hands on the wheel gives you maximum steering
control when you need it most. An exception to this is if you have a disability that
prevents you from using both hands.
Gears
In a vehicle with manual transmission, do not shift gears during the turn. If you need to,
you may shift gears immediately after the vehicle is moving but before it is well into the
turn. You may also shift gears in an intersection wider than four lanes if not doing so
would slow down other traffic. Generally, not changing gears gives you more control over
your vehicle when turning.
Speed
Move ahead within four to five seconds after it is safe to start. Make the turn at a steady
speed, increasing speed as you complete the turn. Drive slowly enough to keep full
control of your vehicle without slowing down other traffic.
Wide/short
Turn into the corresponding lane on the intersecting road without going over any lane
markings or curbs.
Completing the turn
This driving task completes the turn. It begins when you enter the intersecting road and
ends when you return to normal traffic speed. Take the following actions:
Lane
End your turn in the lane that corresponds to the lane you turned from. If you are
turning left onto a multi-lane road, return to normal traffic speed and move into the curb
lane when it is safe to do so. If you are turning right onto a road where the right lane is
blocked with parked vehicles or cannot be used for other reasons, move directly to the
next available lane.
Traffic check
As you return to normal traffic speed, check your mirrors to become aware of the traffic
situation on the new road.
Speed
Return to normal traffic speed by accelerating smoothly to blend with the traffic around
you. In light traffic, accelerate moderately. In heavier traffic, you may have to accelerate
more quickly. In a vehicle with manual transmission, shift gears as you increase speed.
Stop intersection
Diagram 6-2-1
The approach
This driving task is done at intersections where you must come to a stop. It begins at the
point where you can see the intersection and ends just before you enter the intersection.
Be sure to follow these actions:
Traffic check
Before slowing down, look all around you. Use your mirrors to check traffic behind you.
Speed
Steadily reduce speed as you approach the intersection. In a vehicle with manual
transmission, you may downshift into a lower gear as you slow down. Do not coast with
your foot on the clutch pedal.
Space
While slowing down, keep at least a two to three-second distance behind the vehicle in
front of you.
The stop
This driving task includes the actions you take while stopped and waiting to move
through the intersection. Remember these points:
Stop
Come to a complete stop. Do not let your vehicle roll forward or backward. When traffic
conditions allow, move forward to check that the way is clear or start across the
intersection. If you have to stop after you have passed the stop line, do not back up.
Space
When stopped behind another vehicle at the intersection, leave enough space to pull out
and pass without having to back up. Leaving this space protects you in three ways: it lets
you pull around the vehicle in front if it stalls; it helps prevent you from being pushed
into the ahead if you are hit from behind; and it reduces the risk of collision if the vehicle
ahead rolls backward or backs up.
Stop line
If you are the first vehicle approaching an intersection with a red light or stop sign, stop
behind the stop line if it is marked on the pavement. If there is no stop line, stop at the
crosswalk, marked or not. If there is no crosswalk, stop at the edge of the sidewalk. If
there is no sidewalk, stop at the edge of the intersection.
Driving through
This task includes the actions you take as you drive through the intersection and return
to normal traffic speed. Make sure to follow these actions:
Traffic check
If you are stopped, waiting for a green light or for the way to be clear, keep checking
traffic all around you. Just before entering the intersection, look left, ahead and right to
check that the way is clear. If there is any doubt about the right-of-way, try to make eye
contact with nearby drivers or pedestrians. You have not properly checked traffic if
another vehicle or pedestrian has the right-of-way and must take action to avoid your
vehicle.
Both hands
Keep both hands on the steering wheel as you drive through the intersection. You are
most at risk from other traffic when you are crossing the intersection. Using both hands
on the wheel gives you maximum steering control when you need it most. An exception
to this is if you have a disability that prevents you from using both hands.
Gears
In a vehicle with manual transmission, do not shift gears crossing the intersection. If you
need to, you may shift gears immediately after the vehicle is moving but before it is well
into the intersection. You may also shift gears in an intersection wider than four lanes if
not doing so would slow down other traffic. Generally, not changing gears gives you more
control over your vehicle.
Traffic check
As you return to normal traffic speed, check your mirrors to become aware of the traffic
situation after you have gone through the intersection.
Speed
Move ahead within four to five seconds after it is safe to start. Return to normal traffic
speed by accelerating smoothly to blend with the traffic around you. In light traffic,
accelerate moderately. In heavier traffic, you may have to accelerate more quickly. In a
vehicle with manual transmission, shift gears as you increase speed.
Through intersection
Diagram 6-3-1
The approach
This driving task is done at intersections where you may not need to stop. It begins at the
point where you can see the intersection and ends just before the entrance to the
intersection. Remember to do the following:
Traffic check
As you approach the intersection, look left and right for traffic on the intersecting road. If
you have to slow down for the intersection, check your mirrors for traffic behind you.
Speed
Keep at the same speed as you go through the intersection unless there is a chance
traffic may cross the intersection in front of you. If so, slow down or hold your foot over
the brake, ready to slow down or stop. Watch for pedestrians about to cross the
intersection and vehicles edging into the intersection or approaching at higher speeds.
Space
Keep at least a two- to three-second distance behind the vehicle in front of you.
Driving through
This driving task includes your actions from the time you enter the intersection until you
have crossed it and are returning to normal traffic speed. Remember these points:
Lane
Do not go over lane markings or change lanes in the intersection. If your lane is blocked
by a vehicle turning left or a vehicle edging into the intersection from the right, slow
down or stop instead of pulling out to go around the vehicle.
Both hands
Keep both hands on the steering wheel as you drive through the intersection. You are
most at risk from other traffic when you are crossing the intersection. Using both hands
on the wheel givesyou maximum steering control when you need it most. An exception
to this is if you have a disability that prevents you from using both hands.
Gears
In a vehicle with manual transmission, do not shift gears while crossing the intersection.
If you need to, you may shift gears immediately after the is moving but before it is well
into the intersection. You may also shift gears in an intersection wider than four lanes if
not doing so would slow down other traffic. Generally, not changing gears gives you more
control over your vehicle.
Traffic check
If you slowed down for the intersection, check your mirrors again before returning to
normal traffic speed.
Freeway
Diagram 6-4-1
Entering
This driving task begins on the entrance ramp to a freeway and ends when you have
reached the speed of the traffic on the freeway. Remember to do the following:
Traffic check
While on the ramp, as soon as you can see freeway traffic approaching from behind,
check your mirrors and blind spot for a space to merge safely. At the same time, watch
any vehicles in front of you on the ramp and keep back a safe distance. Continue to
divide your attention between watching in front, checking your mirrors and looking over
your shoulder to check your blind spot until you can merge safely with traffic.
Signal
If you have not done so already, turn on your signal as soon as traffic on the freeway is
able to see your vehicle on the ramp.
Space
While on the ramp and merging with freeway traffic, keep at least a two- to three-second
distance behind the vehicle in front of you. Time your merge so you do not move in
beside another vehicle or into the blind spot of another vehicle. If traffic is heavy or
moving at such a high speed that it is difficult to keep an ideal following distance, adjust
your speed to get the best spacing possible. While on the ramp and in the acceleration
lane, keep inside the lane markings.
Speed
On the curve of the entrance ramp, keep your speed slow enough so that objects and
people inside your vehicle are not pushed from the force created by turning the curve.
While in the acceleration lane, increase your speed to match that of freeway traffic. While
merging, control your speed to blend smoothly with freeway traffic.
Merge
Merge with freeway traffic in a smooth, gradual movement to the centre of the nearest
freeway lane.
Cancel signal
Turn off your signal as soon as you have merged with freeway traffic.
Driving along
This driving task checks your actions driving along the freeway (but not merging,
changing lanes or exiting). Be sure to remember the following points:
Traffic check
While driving along, keep checking traffic all around you and look in your mirrors every
five to 10 seconds.
Speed
Avoid exceeding the speed limit or driving unreasonably slowly. Whenever possible, drive
at a steady speed. Look ahead to where you are going to be in the next 12 to 15 seconds
for dangerous situations or obstacles that you can avoid by changing your speed.
Space
Always keep at least a two- to three-second distance behind the vehicle in front of you. If
another vehicle follows too closely behind you, give yourself even more room in front or
change lanes. Try to keep a space on both sides of your vehicle, and try not to drive in the
blind spots of other vehicles. Avoid driving behind large vehicles. Because of their size,
they block your view of traffic more than other vehicles.
Exiting
This driving task begins when you are driving in the far right lane of the freeway and can
see the exit you want to take. It ends when you reach the end of the exit ramp.
Remember to do the following:
Traffic check
Before moving into the exit lane, look left and right and check your mirrors. If there is a
lane of traffic on your right, such as an acceleration lane from an entrance ramp or a
paved shoulder, remember also to check your right blind spot.
Signal
Turn on your signal before you reach the exit lane.
Exit lane
Enter the exit lane at the beginning of the lane with a smooth, gradual movement. Stay
inside the lane markings. If there are two or more exit lanes, do not cross solid lines on
the pavement to change lanes.
Speed
Do not slow down before you are completely in the exit lane. Once you are in the lane,
slow gradually without causing traffic to pile up behind you. On the curve of the exit
ramp, keep your speed slow enough so that objects and people inside your vehicle are
not pushed from the force created by turning the curve. In a vehicle with manual
transmission, downshift as you reduce speed.
Space
Keep at least a two- to three-second distance behind the vehicle in front of you.
Cancel signal
Turn off your signal once you are on the exit ramp.
Lane change
Diagram 6-5-1
This driving task begins as you look for a space to change lanes and ends when you have
completed the lane change. Remember to follow these actions:
Traffic check
While waiting to change lanes safely, look all around you. Divide your attention between
watching in front, watching the mirrors and checking your blind spot. If there is another
lane beside the one you are moving into, check traffic in that lane to avoid colliding with a
vehicle moving into the lane at the same time as you do.
Signal
Turn on your signal when there is enough space for you to change lanes. After signalling,
check your blind spot one more time before starting to move into the other lane. Your
signal should be on soon enough to give traffic behind you time to react to the signal. If
traffic in the lane you are moving into is heavy, you may turn on your signal before there
is enough space to change lanes. This will let traffic behind you know that you are looking
for a space to change lanes.
Space
Keep at least a two- to three-second distance behind the vehicle in front of you. If there is
another lane beside the one you are moving into, be careful not to move in beside
another vehicle or into the blind spot of another vehicle.
Speed
Adjust your speed to match the speed of traffic in the new lane.
Change
Change lanes with a smooth, gradual movement into the centre of the new lane.
Both hands
Keep both hands on the steering wheel as you change lanes. Using both hands on the
wheel gives you maximum steering control. An exception to this is if you have a disability
that prevents you from using both hands.
Cancel signal
Turn off your signal as soon as you have changed lanes.
Roadside stop
Diagram 6-6-1
The approach
This driving task begins when the examiner tells you to stop and ends once you have
come to a stop. Make sure you take these actions:
Traffic check
Before slowing down, check your mirrors and scan to see if it is legal (look for signs) to
make the roadside stop. Then scan the road for traffic approaching from the front and
rear of your of your vehicle. A 150-metre gap in both directions provides enough space to
perform the move safely. If there is a chance of traffic or pedestrians overtaking you on
the right, check your right blind spot just before pulling over.
Signal
Turn on your signal before slowing down unless there are vehicles waiting to enter the
road from side roads or driveways between you and the point where you intend to stop.
Wait until you have passed these entrances so that drivers will not think you are turning
before the stopping point.
Speed
Steadily reduce speed as you approach the stop. In a vehicle with manual transmission,
you may downshift into a lower gear as you slow down. Do not coast with your foot on
the clutch pedal.
Position
Stop parallel to the curb and not more than about 30 centimetres away from it. If there is
no curb,stop as far as possible off the travelled part of the road. Do not stop where you
will block an entrance or other traffic.
The stop
This driving task includes the actions you take after stopping. Remember to do the
following:
Signal
Turn off your signal and turn on your hazard lights.
Park
If your vehicle has an automatic transmission, put the gear selector in park and set the
parking brake. If your has a manual transmission, set the parking brake and shift into
neutral if not turning off the engine, or shift into low or reverse if turning off the engine.
When parking on a hill, set your wheels against the curb, in the appropriate direction to
keep your vehicle from rolling.
Resume
This driving task begins when the examiner tells you to move back onto the road and
ends when you have returned to normal traffic speed. Take the following actions:
Start
Turn on the engine. Release the parking brake and select the correct gear to move back
onto the road.
Signal
Turn off your hazard lights and turn on your left turn signal.
Traffic check
Just before pulling away from the stop, check your mirrors and your left blind spot.
Speed
Cancel signal
Turn off your signal as soon as you are back on the road.
Curve
This driving task begins when the curve comes into sight and ends when you have gone
completely around it. Follow these actions:
Diagram 6-7-1
Speed
As you approach the curve, try to determine the safe speed for it. To do this, look for
clues such as a sign that shows the safe speed, the shape of the curve and the type of
road you are driving on. Slow down to the safe speed for the curve by the time you are
30 metres into it. In a blind curve where you cannot see all the way around it, drive more
slowly in case oncoming traffic wanders into your lane or the curve is tighter than you
expected. Slow down before the start of the curve to avoid braking in it. While in the
curve, keep your speed steady and slow enough so that objects and people inside your
vehicle are not pushed from the force created by turning on the curve. Near the end of
the curve, begin accelerating to return to normal speed. In a vehicle with manual
transmission, do not shift gears in the curve. Not changing gears gives you more control
over your vehicle and reduces the risk of your wheels locking while downshifting.
Lane
As you enter the curve, look across or as far around it as possible. This helps you stay in a
smooth line and centred in the lane throughout the curve. If you look only at the road
directly in front of you, you are likely to wander back and forth across the lane, forcing
you to constantly correct your steering.
Business section
This driving task is done on straight sections of road where a number of businesses are
located. Be sure to do the following actions:
Diagram 6-8-1
Traffic check
In a business area, there are many places other than intersections where vehicles or
pedestrians are likely to enter the road. These include entrances to businesses,
institutions and construction sites, as well as pedestrian and railway crossings. At all
these locations, look left and right to check for vehicles or pedestrians about to enter the
road.
Mirror check
While driving along, check your mirrors every five to 10 seconds. Check your mirrors
more often in heavy traffic or where vehicles are moving at different speeds.
Lane
Drive in the safest lane for through traffic. This is usually the curb lane. However, if the
curb lane is blocked by traffic or there are many curbside hazards, the centre lane may
be a safer choice. Keep to the centre of the lane and within the lane markings. Look
ahead to where you will be in the next 12 to 15 seconds for dangerous situations or
obstacles that you can avoid by changing lanes.
Speed
at a steady speed. Look ahead to where you will be in the next 12 to 15 seconds for
dangerous situations or obstacles that you can avoid by changing your speed.
Space
Keep at least a two- to three-second distance behind the vehicle in front of you. Increase
the distance if another vehicle follows too closely behind you. On a multi-lane road, try to
keep a space on both sides of your vehicle, and try not to drive in the blind spots of other
vehicles. In slow traffic, avoid driving behind large vehicles that block your view of traffic
ahead of you. When you stop behind another vehicle, leave enough space to see its rear
wheels or to pull around it without having to back up.
Residential section
This driving task is done on straight sections of residential or rural road. Remember
these points:
Diagram 6-9-1
Traffic check
On a residential road, watch out for entrances to schools, pedestrian crossings,

driveways, sidewalks and any other locations where there might be traffic hazards. On a
rural road, watch for entrances to residences, farms, businesses and industrial sites. At
all these locations, look left and right to check for vehicles or pedestrians about to enter
the road.
Mirror check
While driving along, check your mirrors every five to 10 seconds. Check your mirrors
more often in heavy traffic or where vehicles are moving at different speeds.
Lane
Keep to the centre of the lane. If there are no lane markings, keep to the centre of the
travelled part of the road, away from parked vehicles or pedestrians. Where you cannot
see far ahead on the road because of a curve or a hill, move right to avoid colliding with
an oncoming vehicle that is over the centre line. Look ahead to where you will be in the
next 12 to 15 seconds for dangerous situations or obstacles that you can avoid by
changing lanes.
Speed
at a steady speed. Look ahead to where you will be in the next 12 to 15 seconds for
dangerous situations or obstacles that you can avoid by changing your speed.
Space
Keep at least a two- to three-second distance behind the vehicle in front of you. Increase
the distance if another vehicle follows too closely behind you. In slow traffic, avoid driving
behind large vehicles that block your view of traffic ahead. When you stop behind
another vehicle, leave enough space to see its rear wheels or to pull around it without
having to back up.
Parallel park
Diagram 6-10-1
The approach
This driving task begins when the examiner tells you to park and ends when you have
come to a stop, ready to back into the parking space. Remember these points:
Traffic check
Before slowing down, check your mirror for traffic behind you. Before pulling into
position to back up, check your blind spot.
Signal
road from side roads or driveways between you and your stopping point. Wait until you
have passed these entrances so that drivers will not think you are turning before your
parallel parking position.
Speed
Steadily reduce speed. In a vehicle with manual transmission, you may downshift into a
lower gear as you slow down. Do not coast with your foot on the clutch pedal.
Stop
Stop beside, or parallel to, the parked vehicle (real or imaginary) in front of the empty
parking space. Leave at least 60 centimetres between your vehicle and the parked
vehicle. Stop when your vehicle is completely in front of the empty parking space.
Park
This driving task includes the actions you take to park in a parallel parking space.
Remember to do the following:
Traffic check
Before backing up, look all around the vehicle and check your mirrors and both blind
spots. Do not start reversing until the way is clear or traffic has stopped to let you park.
Back up
Begin reversing into the space, turning the steering wheel toward the curb. When your
vehicle is about halfway into the space, steer to bring your vehicle in line with the curb.
Once you are in the parking space, move forward or backward to fit within the pavement
markings or to allow room for the vehicle in front or behind you to pull out. Do not hit
the curb or touch another vehicle while entering your parking space. Where there is no
curb, park off the travelled part of the road.
Park
If your vehicle has automatic transmission, put the gear selector in park and set the
parking brake. If your vehicle has manual transmission, set the parking brake and shift
into neutral if not turning off the engine, or shift into low or reverse if turning off the
engine. When parking on a hill, turn your wheels in the appropriate direction to keep
your vehicle from rolling.
Resume
This driving task begins when the examiner tells you to move from the parking space and
ends when you have returned to normal traffic speed. Remember these points:
Start
Turn on the engine. Release the parking brake and select the correct gear to move back
onto the road.
Signal
Turn on your signal.
Traffic check
Just before pulling out of the parking spot, check your mirrors and your blind spot.
Speed
Cancel signal
Turn off your signal after you leave the parking space.
Three-point turn
Diagram 6-11-1
The approach
This driving task begins when the examiner tells you to stop and turn your vehicle
around. It ends when you have almost stopped, ready to start the turn. Be sure to do the
following:
Traffic check
Before slowing down, check traffic in front and behind you. If necessary, check your blind
spot before pulling over to the right side of the road to stop.
Signal
road from sideroads or driveways between you and your stopping point. Wait until you
have passed these entrances so that drivers will not think you are turning.
Speed
Steadily reduce speed. In a vehicle with manual transmission, you may downshift into a
lower gear as you slow down. Do not coast with your foot on the clutch pedal.
Position
Stop so you are parallel to the curb and not more than 30 centimetres away. Where there
is no curb, stop as far as possible off the travelled part of the road. Do not stop where
you will block an entrance or other traffic.
Turn around
This driving task includes the actions you take to turn around and ends when you are
ready to drive away in the opposite direction. Remember these points:
Traffic check
Check your mirrors and your blind spot just before starting the turn. Wait until the way is
clear or traffic has stopped to let you turn. Each time you stop while turning, check traffic
in both directions.
Signal
Turn on your left signal before starting to turn.
Turn around
With the steering wheel turned sharply left, move slowly and smoothly across the road.
When you have reached the far left side of the road, stop and put your in reverse. With
the steering wheel turned sharply right, reverse so the is facing in the new direction. Stop
and shift into forward gear to move ahead. Use the whole road to make your turn,
reversing only once. Do not reverse over the edge or shoulder of the road or into the
curb.
Resume
This driving task begins when you are turned around, ready to move ahead and ends
when you have returned to normal traffic speed. Make sure you take these actions:
Traffic check
Check your mirrors before increasing speed.
Speed
more quickly. In a with manual transmission, shift gears as you increase speed.
Off-road Vehicles & Snowmobiles

This handbook is only a guide. For official purposes, please refer to the Highway Traffic Act
(https://www.ontario.ca/laws/statute/90h08) , the Motorized Snow Vehicles Act
(https://www.ontario.ca/laws/statute/90m44) and the Off-road Vehicles Act of Ontario

(https://www.ontario.ca/laws/statute/90o04) .
If you're taking beginner driver education, make sure it’s from a ministry-approved school
(http://www.mto.gov.on.ca/english/driver/driving-schools.shtml) .
For more information about driver licensing, visit the website (http://www.mto.gov.on.ca)
.
To request a copy of this book in an alternate format, contact Publications Ontario at 1-

800-668-9938 or (416) 326-5300 or visit ServiceOntario Publications
(http://www.publications.serviceontario.ca) .
Disponible en français. Demandez le « Guide officiel de l'automobiliste de publié par le

MTO »
Driving is a privilege - not a right
Introduction
Off-road vehicles and snowmobiles are popular forms of recreation for many people in
Ontario. They are also necessary for transportation in remote areas and in emergencies.
But these vehicles are not toys. If you intend to use them, you must know how they work,
how to drive them safely in different situations and how Ontario laws apply to them.
It is important to remember that off-road vehicles are intended for off-road use. Dirt
bikes cannot be driven on public roads, although snowmobiles can be in some areas. Off-
road vehicles are allowed to travel directly across some highways. However only single-
rider, all-terrain vehicles can be driven on the shoulder of some provincial highways and
municipal roads where bylaws permit.
This section of the handbook contains information about Ontario’s laws and safe driving
tips for snowmobiles and off-road vehicles. As you read, remember it is a guide only. For
official purposes, please refer to the Highway Traffic Act, the Motorized Snow Vehicles Act,
the Off-road Vehicles Act, the Trespass to Property Act and the Occupiers' Liability Act of
Ontario. The applicable legislation can be accessed online through Ontario’s e-Laws
website (https://www.ontario.ca/laws) .
Note: Alcohol presents a major risk to your safety and the safety of others whether you
are driving a car, motorcycle, snowmobile or off-road vehicle. Drinking affects your ability
to operate your vehicle and increases your chances of having a collision.
Driving a snowmobile
This chapter tells you what you need to know to drive a motorized snow vehicle in
Ontario. This includes age requirements, registration, where you can and cannot drive,
safety tips, traffic signs and signals and the Snowmobiler’s Code of Ethics.
I. Getting ready to drive a snowmobile
What you need to drive a snowmobile in Ontario
You can drive a snowmobile if you have a valid Ontario driver’s licence (any class). If you
do not have a driver’s licence and you are 12 years of age or older, a valid motorized
snow-vehicle operator’s licence (MSVOL) will allow you to drive on trails established and
maintained by a recreational organization for the use of snowmobiles. However, you
must be 16 years of age or older and have a driver’s licence or a motorized snow-vehicle
operator’s licence (not both) to drive a snowmobile along or across a public road where
snowmobiles are allowed.
An MSVOL is issued by the Ontario Federation of Snowmobile Clubs in co-operation with

the Ministry of Transportation. You must successfully pass a snowmobile driver-training
course to get a licence. (For more information on how to get a motorized snow-vehicle
operator’s licence.
If you are a visitor to Ontario and wish to drive a snowmobile while you are here, you
must have a valid licence that allows you to drive a snowmobile in your home province,
state or country.
You must carry your driver’s licence or snow-vehicle operator’s licence when you are
driving your snowmobile anywhere other than on your own property. You must show it
when asked by a police or conservation officer.
If your driver’s licence or snow-vehicle operator’s licence has been suspended, you may
not drive any type of vehicle on or off any roads or in any public place.
Registering and insuring your snowmobile
Before driving a snowmobile, it must be registered with the Ministry of Transportation

through a ServiceOntario centre. This applies to new or used snowmobiles that have
never been registered, and snowmobiles previously registered in another jurisdiction. If
you buy a new snowmobile, it must be registered within six days of sale.
If you buy a new snowmobile, your dealer will register it with the Ministry of
Transportation within six days of the sale. If you buy a used snowmobile that has been
previously registered, you will simply need the signed snow-vehicle permit and the bill of
sale to transfer the registration into your name.
You must pay a fee to register your snowmobile. This is a one-time fee to be paid by the
owner of the snowmobile. After registering, you will be given a permit and a registration
number decal to display on your snowmobile.
Attach the decal to each side of your snowmobile’s cowling or engine cover. It should be
placed so that the start of the registration number is between 10 and 15 centimetres
from the rear of the cowling. If the decal cannot be placed on the cowling because of the
design of the vehicle, place the decal on each side of the tunnel, near the light reflector.
Unless you are driving your registered snowmobile on your own property or you are a
resident of northern Ontario that is exempt, you must have a validation sticker on your
registration decal. You must carry your driver’s licence or MSVOL and evidence of your
vehicle’s registration at all times and show it to a police or conservation officer when
asked.
Snowmobiles are only permitted on public highways when directly crossing. In specific
circumstances, snowmobiles can operate on the non-serviced portion of some highways.
Local municipalities also have authority to pass bylaws governing the use of snowmobiles
on highways under their jurisdiction.
There is an annual renewal fee for the sticker. Place the sticker in the upper right corner
of the decal.
You must also have liability insurance to drive your snowmobile off your own property.
Carry the insurance card given to you by the insurance company for the snowmobile, and
show it when a policeor conservation officer asks for it. If someone else uses your
snowmobile with your consent, you are both responsible for any penalties, damages or
injuries that may occur.
There are separate requirements and rules regarding the operation of trail grooming
equipment. Make sure you know what is required before operating grooming equipment.
Wear a helmet
You must wear a helmet whenever you drive or ride on a snowmobile or any kind of
toboggan or sled towed by a snowmobile. Although you do not require a helmet when
you operate a snowmobile on your own land, it is recommended that you wear one for
safety reasons. The helmet must meet the standards approved for motorcycle helmets,
or motor-assisted bicycle helmets, and must be fastened properly under the chin.
Protect your eyes and face
Always wear a face shield or goggles. A face shield can help prevent windburn, frostbite,
sunblindness and watering eyes from the wind. A face shield can also protect your eyes
from branches and twigs when driving through wooded areas. Select lightly tinted and
shatterproof shields or goggles to match conditions. For example, choose clear plastic for
dull, cloudy days and deep yellow for late afternoon when flat light can hide depressions
in the snow. Avoid dark-tinted shields or goggles, which can restrict your vision.
Make sure your snowmobile is in good condition
Before every trip, check your snowmobile to make sure it is in good working order. Your
life may depend upon it. Do the following:
Check the steering mechanism. Turn the handlebars back and forth to make sure
the turning is smooth and unrestricted.
Check the condition and tension of the motor drive belt. Change it if necessary or if
you are in doubt about its reliability.
Check the emergency switch, headlights and tail lights.
Check the battery solution level.
Check the throttle and brake levers. Make sure they move freely.
Check the spark plugs and the tank’s fuel level. Do not use matches or a lighter
when doing this, and never add fuel when the motor is running.
When towing a toboggan, sled or any other kind of vehicle behind a snowmobile, be sure
to use a rigid tow bar and a safety chain. For safety, towed vehicles must have reflective
material on the front sides, rear sides and rear to make them more visible. Towing is
generally not allowed on public roads except to cross the road at a 90-degree angle. This
does not apply to a snowmobile being used to free a stuck vehicle, for any emergency
rescue or for trail maintenance.
Before you drive anywhere, read the owner’s manual carefully and keep it in your
snowmobile at all times.
Be well prepared for every trip
Carefully preparing for every trip is an important part of safe snowmobiling. Check local
weather forecasts and local ice conditions before heading out, as they can change in a
matter of hours. Avoid travelling on unmarked frozen lakes and rivers. Make sure you tell
someone where you will be travelling and when you expect to be back. Use the buddy
system; do not drive your snowmobile alone and always ride within your abilities and
according to conditions.
Take along a first-aid kit, a vehicle repair kit, an extra ignition key, a drive belt, spark plugs
and a rope. On long trips, include a map and a compass (or a GPS unit and know how to
use it), flashlight, hunting knife, hatchet, extra fuel, matches in a waterproof box and
high-energy food such as granola bars. If you travel over frozen lakes and rivers, wear a
buoyant snowmobile suit and carry ice picks to improve the chances of survival if you
break through the ice.
II. Safe and responsible snowmobiling
Where you can and cannot drive
You may drive your registered snowmobile on your own property, on the private trails of
organizations to which you belong, on private property when you have the owner’s
permission or in permitted public parks and conservation areas.
Snowmobiles are only permitted on public highways when directly crossing. In specific
circumstances, snowmobiles can operate on the non-serviced portion of some highways.
Local municipalities also have the authority to pass bylaws governing the use of
snowmobiles on highways under their authority.
You may not drive a snowmobile on certain high-speed roads, freeways, the Queen
Elizabeth Way, the Ottawa Queensway and the Kitchener-Waterloo Expressway. This
includes the area around these roads, from fence line to fence line. You may not drive on
the serviced section of a road (from shoulder to shoulder) except to cross. When
crossing, you must slow down, stop and then proceed at a 90-degree angle. When riding
in a group, do not motion the driver behind you to cross. Let each rider assess oncoming
traffic and decide for themselves when it is safe to cross. If visibility is restricted at the
crossing, you may then wave to the driver behind you that the way is clear.
Except where prohibited, you may drive your snowmobile along public roads, keeping as
far away from the road as possible in the section between the shoulder and the fence
line. Local municipalities may pass bylaws that regulate or prohibit snowmobiles
anywhere within their boundaries, on or off public roads. Make sure you are aware of the
bylaws in the municipality where you intend to snowmobile.
You may not drive a snowmobile on railway tracks unless you have permission from the
railway track authority.
Public trails
Ontario’s public trails are established and maintained by many snowmobile clubs. They
are patrolled by Ontario Provincial Police, municipal police, conservation officers and
Snowmobile Trail Officer Patrol officers. Some clubs require snowmobiles to have and
display a trail permit to drive on their trails. Some other clubs allow their trails to be used
without a trail permit. Trails may have signs stating that a trail permit is required. If you
are unsure, check with the local snowmobile club to find out if you need a trail permit.
For trails operated by the Ontario Federation of Snowmobile Clubs, you must have and
display a trail permit. This includes trails on private property, municipal property and
land owned by the government. Some snowmobile-trail user groups are exempt from the
permit requirement. Those who are eligible for exemption and the documents required
as proof are included in the trail-permits section of the regulations of the Motorized Snow
Vehicles Act. Snowmobilers who are exempt must carry the appropriate documents and
show them when requested to do so.
For information about trails and trail permits, contact your local snowmobile club or the
Ontario Federation of Snowmobile Clubs, 501 Welham Road, Unit 9, Barrie, ON L4N 8Z6.
Phone 705-739-7669; fax 705-739-5005; or e-mail at info@ofsc.on.ca
(mailto://www.ofsc.on.ca) . You can visit the OFSC website (http://www.ofsc.on.ca) .
Do not trespass
You are trespassing if you drive your snowmobile on private property without permission
from the owner. The owner is not required to have a “No Trespassing” sign posted. If you
are driving your snowmobile on private property, you must stop and identify yourself
when asked by the police, the owner of the property or a representative of the owner. If
you are told to leave the property, you must do so immediately.
You may be fined if you are convicted of trespassing. In addition, you may be ordered to
pay damages. Under certain circumstances, you may also be required to pay for the cost
of prosecuting. Charges will be laid against the driver of the snowmobile. If the driver is
not known, the owner may be charged if the snowmobile was used with the owner’s
permission.
A copy of the Trespass to Property Act is available through Publications Ontario. Phone
(416) 326-5300 or 1-800-668-9938. It is available over the Internet at ServiceOntario
Publications (http://www.publications.gov.on.ca) and Ontario’s e-Laws website
(https://www.ontario.ca/laws) .
It is an offence under the Railway Safety Act to trespass on railway tracks.
Obey the speed limits
You must not drive a snowmobile faster than 20 km/h in any public park or exhibition
ground, or on any road where the speed limit for other vehicles is 50 km/h or less. You
must not drive faster than 50 km/h on snowmobile trails or on any road where the speed
limit for other vehicles is more than 50 km/h. Always leave extra space between you and
the snowmobile in front to give yourself more time to react to unexpected hazards and
stop safely. Lower your speed at night and don't outrun your headlights. Reduced
nighttime visibility makes hazards more difficult to spot and estimating distance is much
harder. Always wear clothing with reflective markings to remain visible at night.
Municipalities may set other speed limits for snowmobiles on public roads, trails and
parks within their boundaries. Check municipal bylaws.
Stop for police
You must come to a safe stop when requested by a police officer to do so. If you do not
stop, you may have to pay a fine or go to jail, or both. If you are convicted of failing to
stop for a police officer and the court believes you wilfully avoided police during pursuit -
that you tried to escape the police - your licence will be suspended for a minimum of five
years. Your licence can be suspended for up to 10 years if anyone is killed or injured as a
result of avoiding police.
Report collisions to the police
You must report to the police immediately any collision that results in injury to any
person or damage to property apparently exceeding $400.
Do not drink and drive
Alcohol is a major factor in snowmobile fatalities. Consuming any amount of alcohol

before you ride affects your ability to make good decisions. Alcohol also increases
fatigue, slows reaction time and increases your risk of hypothermia.
It is against the law to drive a snowmobile when you are impaired by alcohol or drugs.
Drinking and driving is a deadly combination. All drivers, especially inexperienced drivers,
must be able to concentrate on driving.
Consuming any amount of alcohol before you ride affects your ability to make good
decisions. Even one drink can reduce your ability to concentrate and react to things that
happen suddenly when you are driving. With more alcohol in your blood, you could have
trouble judging distances and your vision may become blurred. Factors like tiredness,
your mood, and how long ago you ate and how much, can make a difference in how
alcohol affects your driving ability.
physical co-ordination tests. If you fail or refuse to provide a breath sample or to perform
the physical co-ordination tests, you will be charged under the Criminal Code.
If the reading on the machine shows you have been drinking, you may be taken to a
police station for a breathalyzer test. The breathalyzer uses your breath to measure the
amount of alcohol in your bloodstream.
police officer can require you to provide a blood sample instead.
If the police believe that a driver is impaired because of the consumption of a drug or a
combination of alcohol and a drug, they can also require a driver to submit to an
evaluation and then require a driver to provide blood, oral fluid or urine samples. If you
fail or refuse to comply with any of these demands, you will be charged under the
Criminal Code.
Driving impaired or with more than 80 milligrams of alcohol in 100 millilitres of blood
(.08) is an offence under the Criminal Code. Even if your blood-alcohol concentration is
less than .08, you can still be charged with impaired driving under the Criminal Code.
You will receive an immediate 90-day administrative driver’s licence suspension if your
blood-alcohol concentration (BAC) is more than .08 or if you fail or refuse to provide a
breath or bodily fluid sample, perform a physical co-ordination test or submit to an
evaluation.
If you register in the “warn range” of .05 to .08 on a roadside screening device, you will
receive an immediate driver’s licence suspension. For a first occurrence, you will be
suspended for three days. For a second occurrence in a five-year period, you will be
immediately suspended for seven days and you must undergo a remedial alcohol-
education program. For a third or subsequent time in a five-year period, you will be
immediately suspended for 30 days, and you must undergo a remedial alcohol-treatment
program and have an ignition interlock condition placed on your licence for six months. If
you choose not to install an ignition interlock device, you must not drive until the
condition is removed from your licence.
If you are 21 years old and under and hold a full-class driver’s licence, you must not drive
if you have been drinking alcohol. Your blood-alcohol level must be zero. If you are
caught driving with alcohol in your blood, you will receive an immediate driver’s licence
suspension at the roadside for 24 hours and, if convicted, you will face a fine and a 30-
day licence suspension.
Drivers of all ages in either Level One or Level Two of Ontario’s graduated licensing
system must also have a blood-alcohol level of zero when driving. New drivers caught
drinking and driving will receive an immediate driver’s licence suspension at the roadside
for 24 hours and, if convicted, will face a fine and will receive a suspension period as per
the Novice Driver Escalating Sanctions scheme. For the first occurrence, you will be
suspended for 30 days. For the second occurrence, in a five-year period, you will be
suspended for 90 days. For the third occurrence in a five-year period, the novice portion
of your driver’s licence will be cancelled, and you must reapply for a G1 licence.
Novice drivers will also be charged under the Criminal Code if their BAC exceeds .08 and
will be issued a warn-range suspension if they register between .05 and .08.
Drugs
Any drug that changes your mood or the way you see and feel about the world around
you will affect the way you drive. Criminal Code and HTA sanctions apply to drivers
impaired by alcohol or a drug.
In circumstances involving possible impairment by drugs or a combination of alcohol and

a drug, police can require a driver to perform physical co-ordination tests and to submit
to an evaluation, and then require a driver to provide blood, oral fluid or urine samples. If
you fail or refuse to comply with any of these demands, you will be charged under the
Criminal Code. You will also receive an immediate 90-day administrative driver’s licence
suspension. Illegal drugs such as marijuana and cocaine are not the only problem. Some
drugs that your doctor may prescribe for you and some over-the-counter drugs can also
impair your driving.
Here are some points you should remember:
your driving.
Read the information on the package of any over-the-counter medicine you take.
Any stimulant, diet pill, tranquillizer or sedative may affect your driving. Even allergy
and cold remedies may have ingredients that could affect your driving.
several days after you have taken the drug. Do not take a chance - ask your doctor
or pharmacist.
Practice safe snowmobiling
Driving a snowmobile requires the same attention and alertness that driving any other
kind of vehicle does. You must have complete control of your reflexes. If you are a
beginner, practise until you can handle the basic driving skills.
Learn how to control your balance on turns by using your weight to control your
movements and leaning in the direction you want to turn. Position your body on the
snowmobile in a way that will give you the most comfort and control for the conditions in
which you are driving. On level ground, sit or kneel with both knees on the seat. On
uneven or bumpy ground, stand on the running boards with your knees slightly bent.
Always take the time to plan your route before you ride and make sure others in your
group know the route as well. If you must stop on the trail, always select a location where
you will be visible and pull over to the right as far as possible. If you are riding in a group,
you should park the snowmobiles in single file and leave the vehicles running so you are
visible at night.
On hard-packed snow or ice, reduce your speed, because stops and turns are harder to
make and you will require greater distance to complete them. When your snowmobile is
trapped in deep snow, remember to turn off the motor before you try to get it out of the
snow.
Every time you travel on ice, you are risking your safety and that of your passenger.
Watch out for pressure cracks that are much more difficult to spot at night. If you are in
an unfamiliar area, ask local authorities or residents about the ice conditions, inlets,
outlets, springs, fast-moving current or other hazards. Listen to local radio broadcast
warnings by the Ontario Provincial Police about ice conditions. If you must drive over
frozen lakes or rivers, you should consider using a buoyant snowmobile suit. It might
save your life.
Whenever you are driving, always watch for trails and highway, signs and obey them.
Always remain on the right-hand side of the trail when riding and exercise caution on
hills and curves. You should always be prepared for the unexpected. Exercise caution at
road and rail crossings. Trucks and trains often kick up large clouds of snow that greatly
reduce visibility. Carry a cell phone with you when riding.
III. Snowmobile signals and signs
Hand signals
Signals tell others what you want to do, giving them a chance to slow down, stop or
prepare to turn. Use hand signals to signal before stopping, slowing down suddenly or
turning. Give the correct signal well before the action and make sure others can see it.
These illustrations show nationally recognized hand and arm signals.
Left turn
Extend your left arm straight out and point in the direction of the turn.
Right turn
Raise your left arm to shoulder height with elbow bent.
Stop
Extend your right arm straight up over your head with the palm of the hand flat.
Slowing
Extend your left arm out and down the side of your body. Flap your arm up and down to
signal caution.
Oncoming snowmobiles
Raise your left arm to shoulder height with your elbow bent and motion left to right over
your head, pointing to the right side of the trail.
Snowmobiles following
Raise left arm to shoulder height with your elbow bent. Motion front to back over your
shoulder with your thumb, like a hitchhiker.
Last snowmobile in line
With elbow bent, raise your left forearm to shoulder height and clench your fist.
Trail signs
Trail signs give you important information about what to do in certain situations. Here
are some common trail signs and what they mean. Because trail signs are not official
traffic signs, they may vary in shape and colour. Watch for signs such as these and obey
them.
Stop
A stop sign is eight-sided and has a red background with white letters. Come to a
complete stop.
Stop ahead
Be prepared to stop for a stop sign up ahead.
Snowmobiling permitted
A sign with a green circle means you may do the activity shown inside the ring. You may
drive a snowmobile in the area where this sign is displayed.
Snowmobiling restricted
A sign with a red circle with a line through it means the activity shown inside the ring is
not allowed. Do not drive a snowmobile in the area where this sign is displayed.
Direction signs
These signs give you information about the direction in which you should travel on the
trail. Do as the sign tells you.
Traffic signs
If you are driving your snowmobile along or across any public roads, you need to be
aware of traffic signs and what they mean. The following traffic signs relate specifically to
snowmobiles.
Snowmobiles permitted
Snowmobiles are allowed on the road or highway where this sign is displayed.
Snowmobiles restricted
Snowmobiles are not allowed on the road or highway where this sign is displayed.
Snowmobiles crossing
These signs warns drivers that snowmobiles are allowed to cross the road.
Wind-chill factor
It is important to consider the wind-chill factor when planning outdoor winter activities.
Wind-chill factor is the combined effect of wind and low temperature, which makes it feel
much colder on a windy day in winter than is the actual temperature. This is caused by
the faster cooling effect of the wind. For example, if the actual temperature is -10°C and
the wind speed is 40 km/h, the temperature feels like -31°C.
You need to be aware of the wind-chill factor so that you can dress appropriately. Outer
layers that are waterproof and multiple under-layers of clothing provide added
protection, and allow you to take clothing off if temperatures increase. Also, make sure
that young passengers are properly dressed and that their hands and faces are well
protected. Wearing a balaclava will reduce the risk of exposure. Prolonged exposure to
cold wind-chill temperatures can lead to hypothermia.
The chart below can help you calculate wind chill so you will be aware of potentially
dangerous conditions.
Wind-chill calculation chart
Approximate Thresholds:
Wind-chill at or below -25°C: risk of frostbite in prolonged exposure.
Wind-chill at or below -35°C: frostbite possible in 10 minutes; warm skin, suddenly

exposed. (Shorter time if skin is cool at the start.)
Wind-chill at or below -60°C: frostbite possible in less than two minutes; warm skin,
suddenly exposed. (Shorter time if skin is cool at the start.)
Take a snowmobile driver-training course
If you are between 12 and 15 years of age, or if you are 16 and older and do not have a
valid Ontario driver’s licence, you must successfully pass a snowmobile driver-training
course to get your operator’s licence. A snowmobile driver-training course can also be a
valuable refresher for licensed and experienced snowmobilers.
The course takes about six hours and is usually held over three days. It covers safe
driving practices, snowmobile laws, knowledge of the snowmobile, maintenance, driving
positions, survival, first aid, night driving, trail signs, clothing and storage. It also teaches
safe and courteous driving habits and skills to help you avoid collisions and property
damage.
The training course is offered by the Ontario Federation of Snowmobile Clubs (OFSC) in
co-operation with the Ministry of Transportation and is offered by club instructors
trained by the OFSC. For the location of the nearest OFSC member club offering the
course and the cost, contact the OFSC Driver Training Office at 501 Welham Road, Unit 9,
Barrie, ON, L4N 8Z6. Phone 705-739-7669 or fax 705-739-5005. You can visit the OFSC
website (http://www.ofsc.on.ca) .
The snowmobiler’s code of ethics
Follow this code of ethics, and you will do your part to make snowmobiling a respectable,
fun and safe winter recreation.
1. I will be a good sportsperson and conservationist. I recognize that people judge all
snowmobilers by my actions. I will use my influence with other snowmobilers to
promote responsible conduct.
2. I will not litter trails or camping areas. I will not pollute lakes or streams. I will carry
out what I carried in.
3. I will not damage living trees, shrubs or other natural features.
4. I will respect other people’s property and rights.
5. I will lend a helping hand when I see someone in distress.
6. I will make myself and my snowmobile available to assist in search-and-rescue

operations.
7. I will not interfere with or harass hikers, skiers, snowshoers, people who are ice
fishing or participating in other winter sports. I will respect their rights to enjoy
recreation facilities.
8. I will know and obey all federal, provincial and local rules regulating the operation of
snowmobiles in areas where I use my snowmobile.
9. I will not harass wildlife. I will avoid areas posted for the protection of wildlife.
10. I will not drive where snowmobiles are prohibited.
Summary
The licensing requirements to operate a snowmobile on roads and trails
The importance of checking your snowmobile, preparing for trips and wearing
proper protective gear
Where you can and cannot drive your snowmobile
The dangers of alcohol and driving on frozen lakes and rivers
Hand signals, trail signs and traffic signs specific to snowmobiles
Driving an Off-road vehicle
Off-road vehicles (sometimes called ORVs) are any two- or three-wheeled motorized
vehicles, as well as specific vehicles with four or more wheels as prescribed by regulation,
intended for recreational use. Examples of off-road vehicles include all-terrain vehicles
(ATVs), two-up ATVs, side-by-side ATVs, utility terrain vehicles (UTVs), amphibious ATVs,
off-road motorcycles and dune buggies.
Note: Electric and motorized scooters (commonly known as go-peds) and pocket bikes
(which are miniature motorcycles about two feet in height and with a speed of 70-80
km/h) are not off-road vehicles and, as such, cannot be registered as off-road vehicles.
These vehicles also do not comply with motorcycle standards and cannot be registered
as motorcycles.
I. Getting ready to drive an off-road vehicle
What you need to drive an off-road vehicle in Ontario
You must be 12 years of age or older to drive an off-road vehicle, except on land
occupied by the vehicle owner or under the close supervision of an adult. Direct and
close supervision by an adult is recommended.
While off-road vehicles are generally not allowed on public roads, there are some
exceptions. (See the section "Where you can and cannot drive.")
Registering and insuring your off-road vehicle
Off-road vehicles must be registered with the Ministry of Transportation at a

ServiceOntario centre. This applies to both new and used vehicles. You must be 16 years
or older to register an off-road vehicle, and you must be able to prove you own the
vehicle.
If you buy a new off-road vehicle, you must get a certificate of sale from the dealer.
If you buy or transfer ownership of a used off-road vehicle, you must present the signed
vehicle portion of the vehicle permit from the previous owner.
You must pay a fee to register your off-road vehicle. After registering, you will be given a
vehicle permit and licence plate. You should carry the vehicle permit at all times unless
you are operating the vehicle on land occupied by the owner of the vehicle.
If you have a two- or three-wheeled vehicle, attach the licence plate to the front of the
vehicle in plain view. If you have a vehicle with four or more wheels, attach the licence
plate to the rear of the vehicle.
You must register your vehicle within six days of becoming the owner. If you change your
address, you must notify the Ministry of Transportation within six days of the change.
You may do this in person at a ServiceOntario centre, by mail to the Ministry of
Transportation, P.O. Box 9200, Kingston, ON K7L 5K4, or on the ServiceOntario website
(http://www.serviceontario.ca) .
If you are driving your off-road vehicle anywhere other than on the vehicle owner’s
property, you must also have vehicle liability insurance. You must carry the insurance
card with you and show it if requested by a police officer. If someone else uses your off-
road vehicle with your consent, you are both responsible for any penalties, damages or
injuries that may occur.
The following vehicles do not need to be registered as off-road vehicles: road-building

machines, farm vehicles, golf carts and motorized wheelchairs. In addition, off-road
vehicles participating in a rally or competition sponsored by a motorcycle association
with more than 25 members do not need to be registered for the event.
Wear a helmet
You must wear a motorcycle helmet, as required by the Highway Traffic Act, whenever you
drive or ride on an off-road vehicle or on any vehicle towed by an off-road vehicle. The
only exception is when you operate the vehicle on the property of the vehicle owner. The
helmet must meet the standards approved for motorcycle helmets, or motor-assisted
vehicle helmets, and must be fastened properly under the chin.
Protect your face and body
Always wear a face shield or goggles. A face shield can help prevent windburn,
sunblindness and watering eyes from the wind. It can also protect your eyes from
branches and twigs when driving through wooded areas. Wear pants that cover your
legs, a long-sleeved shirt or jacket to protect your arms and gloves. Boots should be high
enough to cover your ankles. To make yourself more visible to others while driving, wear
brightly coloured clothing.
Make sure your vehicle is in good condition
Before every trip, check your vehicle to make sure it is in good working order. Your life
may depend upon it. Check the vehicle thoroughly before you start to drive, including the
following:
Check the brake control to make sure it moves freely. Adjust if necessary.
Check that the throttle opens and closes smoothly in all steering positions.
Check the condition of the tires and tire pressure.
Check the fuel lines andconnections to make sure there are no leaks.
Check that you have enough fuel and oil.
Check that the engine is running smoothly. Make sure the is in neutral before
starting the engine.
Check that your lights are in good working condition.
Before you drive anywhere, read the owner’s manual.
Be well prepared for every trip
Carefully preparing for every trip is an important safety measure. Check local weather
forecasts and make sure you tell someone where you will be travelling and when you
expect to be back. Use the buddy system; drive with others, not alone. Take along a first-
aid kit, a vehicle repair kit, an extra ignition key, a drive belt, spark plugs and a rope. On
long trips, include a map and a compass (or a GPS unit and know how to use it),
flashlight, hunting knife, hatchet, extra fuel and matches in a waterproof box.
II. Safe and responsible off-road vehicle driving
Where you can and cannot drive
You may not drive an off-road vehicle on most public roads in Ontario. This includes the
area between the boundary or property lines, including medians, shoulders and ditches.
There are some exceptions:
You may drive an off-road vehicle directly across some public roads.
You may drive certain off-road vehicles with three or more wheels along some
public roads when using the vehicle for farming, for licensed hunting or for the
trapping of fur-bearing animals, provided that the vehicle weighs 450 kilograms or
less and does not have an overall width greater than 1.35 metres (excluding
mirrors).
You may drive an off-road vehicle within a provincial or public park if it is permitted
by the park authority.
Emergency personnel, such as police officers and firefighters, who are performing
necessary duties in the course of their work or who are responding to an
emergency, may drive off-road vehicles on public roads.
There are also exceptions for the category of off-road vehicles known as all-terrain
vehicles (ATVs).
If you do drive an off-road vehicle on or across a public road, you must be at least 16
years of age and have a valid Ontario driver’s licence (Class G2, M2 or higher).
You may not operate an ATV in such a way as to disrupt or destroy the natural
environment, including fish habitats, property and plants or trees.
For more specific information on where you may operate off-road vehicles, and what
rules you must follow when doing so, you should refer to the Highway Traffic Act and the
Off-road Vehicles Act.
All-terrain vehicles (ATVs)
All-terrain vehicles are off-road vehicles with the following characteristics: four wheels, all
of which are in contact with the ground; steering handlebars; and a seat designed to be
straddled by the driver.
There are sections of provincial highways in Ontario where you may drive an ATV on the
shoulder, provided the ATV weighs 450 kilograms or less, does not have an overall width
greater than 1.35 metres (excluding mirrors), meets the requirements of the federal
Motor Vehicle Safety Act and the American National Standards Institute Standard, and is
designed to carry only a driver and no passengers. You must travel in the same direction
as the traffic using that side of the road. If there is no shoulder, if the shoulder is
obstructed or if you are crossing a level railway crossing, you may drive your vehicle on
the paved part of the highway. Keep as close as safely possible to the right of the
shoulder or edge of the highway as you can.
Where a road or highway falls under the authority of a municipality, the municipality
must enact a bylaw for ATVs to be allowed access to the road. If there is no bylaw in
place, you cannot drive an ATV on that road. The municipality may also pass bylaws to
decide where andwhen ATVs may be used on these local roads.
For those roads and highways where you are permitted to drive an ATV, you must obey
all licensing and operational requirements, and your vehicle must conform to all
equipment requirements, as listed in the Highway Traffic Act and the Off-road Vehicles Act.
Remember the following rules:
1. You must have a valid Ontario driver’s licence (G2, M2 or higher).
2. You must wear a motorcycle helmet with a chin strap that is securely fastened.
3. You cannot carry passengers on your vehicle.
4. You must drive at speed limits lower than those posted: where the posted speed is
50km/h or less, you must drive 20 km/h or less; where the posted speed is over 50
km/h, you must drive 50 km/h or less.
In general, ATVs are not permitted on controlled-access highways, such as the 400 series
highways and most parts of the Trans-Canada Highway, but are allowed access to
highways 500 to 899, the 7000 series highways and highways with low traffic volumes.
For more details about which highways ATVs may drive on, please refer to the Highway
Traffic Act, Ontario Regulation 316/03.
Obey the rules
You must stop if a police officer signals you to do so. You can also be stopped by a
landowner when you are driving on private property. If signalled to stop by an authorized
person, you must stop and, if asked, properly identify yourself.
Everyone who drives an off-road vehicle without care and attention or without
reasonable consideration for other people and property may be charged with careless
driving. Other offences, such as dangerous driving and alcohol related offences, apply to
drivers of off-road vehicles. When you drive an off-road vehicle on a public road, the
Highway Traffic Act offences also apply.
Report collisions to the police
You must report to the police immediately any collision on a public highway that results
in injury to any person or damage to property apparently exceeding $2,000.
Do not drink and drive
It is against the law to drive an off-road vehicle when you are impaired by alcohol or
drugs.
Drinking and driving is a deadly combination.
Consuming any amount of alcohol before you ride affects your ability to make good
decisions. Even one drink can reduce your ability to concentrate and react to things that
happen suddenly when you are driving. With more alcohol in your blood, you could have
trouble judging distances and your vision may become blurred. Factors like tiredness,
your mood, and how long ago you ate and how much, can make a difference in how
alcohol affects your driving ability.
physical co-ordination tests. If you fail or refuse to provide a breath sample or to perform
the physical co-ordination tests, you will be charged under the Criminal Code.
If the reading on the machine shows you have been drinking, you may be taken to a
police station for a breathalyzer test. The breathalyzer uses your breath to measure the
amount of alcohol in your bloodstream.
police officer can require you to provide a blood sample instead.
If the police believe that a driver is impaired because of the consumption of a drug or a
combination of alcohol and a drug, they can also require a driver to submit to an
evaluation and then require a driver to provide blood, oral fluid or urine samples. If you
fail or refuse to comply with any of these demands, you will be charged under the
Criminal Code.
Driving impaired or with more than 80 milligrams of alcohol in 100 millilitres of blood
(.08) is an offence under the Criminal Code. Even if your blood-alcohol concentration
(BAC) is less than .08, you can still be charged with impaired driving under the Criminal
Code.
You will receive an immediate 90-day administrative driver’s licence suspension if BAC is
more than .08 or if you fail or refuse to provide a breath or bodily fluid sample, perform a
physical co-ordination test or submit to an evaluation.
If you register in the “warn range” of .05 to .08 on a roadside screening device, you will
receive an immediate driver’s licence suspension. For a first occurrence, you will be
suspended for three days. For a second occurrence in a five-year period, you will be
immediately suspended for seven days and you must undergo a remedial alcohol-
education program. For a third or subsequent time in a five-year period, you will be
immediately suspended for 30 days, and you must undergo a remedial alcohol-treatment
program and have an ignition interlock condition placed on your licence for six months. If
you choose not to install an ignition interlock device, you must not drive until the
condition is removed from your licence.
If you are 21 years old and under and hold a full-class driver’s licence, you must not drive
if you have been drinking alcohol. Your blood-alcohol level must be zero. If you are
caught driving with alcohol in your blood, you will receive an immediate driver’s licence
suspension at the roadside for 24 hours and, if convicted, you will face a fine and a 30-
day licence suspension.
Drivers of all ages in either Level One or Level Two of Ontario’s graduated licensing
system must also have a blood-alcohol level of zero when driving. New drivers caught
drinking and driving will receive an immediate driver’s licence suspension at the roadside
for 24 hours and, if convicted, will face a fine and will receive a suspension period as per
the Novice Driver Escalating Sanctions scheme. For the first occurrence, you will be
suspended for 30 days. For the second occurrence, in a five-year period, you be
suspended for 90 days. For the third occurrence in a five-year period, the novice portion
of your driver’s licence will be cancelled, and you must reapply for a G1 licence.
Novice drivers will also be charged under the Criminal Code if their BAC exceeds .08 and
will be issued a “warn range” suspension if they register a BAC from .05 to .08.
Drugs
Any drug that changes your mood or the way you see and feel about the world around
you will affect the way you drive. Criminal Code and HTA sanctions apply to drivers
impaired by alcohol or a drug.
In circumstances involving possible impairment by a drug or a combination of alcohol

and a drug, police can require a driver to perform physical co-ordination tests and to
submit to an evaluation and then require a driver to provide blood, oral fluid or urine
samples. If you fail or refuse to comply with any of these demands, you will be charged
under the Criminal Code. You will also receive an immediate 90-day administrative
driver’s licence suspension.
Illegal drugs such as marijuana and cocaine are not the only problem. Some drugs that
your doctor may prescribe for you and some over-the-counter drugs can also impair
your driving. Here are some points you should remember:
your driving.
Read the information on the package of any over-the-counter medicine you take.
Any stimulant, diet pill, tranquillizer or sedative may affect your driving. Even allergy
and cold remedies may have ingredients that could affect your driving.
several days after you have taken the drug. Do not take a chance; ask your doctor
or pharmacist.
Do not carry passengers
Do not carry passengers on an off-road vehicle designed for one person. Carrying
passengers changes the weight distribution of the vehicle and limits your ability to shift
position on the vehicle for control and stability.
Practice safe driving skills
Driving an off-road vehicle is different than driving any other type of vehicle, and takes
more skill than you might think. Be sure to read your owner’s manual before you begin
to drive.
If you are a beginner, practise driving your vehicle in an open area that is free of
obstacles, until you become skilled at handling it. Choose ground that is uniform, either
dirt, sand or snow. Avoid paved surfaces when driving an off-road vehicle. ATVs are
designed for off-road use and are more difficult to manoeuvre on paved surfaces. When
driving, keep both feet on the footrests at all times. Do not try to stabilize a tipping
vehicle by putting your foot down. You could run over your foot or leg.
Be extremely careful driving through water. Driving fast across unknown water is
dangerous. Hidden rocks or holes could throw you off the vehicle and cause serious
injury or drowning. First, check that the water is not too deep. Drive slowly and carefully
so you can steer around rocks and other obstacles.
Always use a flag mast when driving in dunes and hills. Remember that you need a
running start to climb most hills. Be extra cautious when driving among pedestrians,
horseback riders, sunbathers or bicyclists.
Read the Snowmobiler’s Code of Ethics, and follow it when driving your off-road vehicle.
Summary
The licensing requirements to operate an off-road vehicle on roads and trails
The importance of checking your off-road vehicle, preparing for trips and wearing
proper protective gear
Where you can and cannot drive your off-road vehicle
The dangers of alcohol and driving an off-road vehicle

The Official Ministry of Transportation (MTO) Driver's Handbook - Ontario - Ca

Uploaded by

Copyright:

Available Formats

The Official Ministry of Transportation (MTO) Driver's Handbook - Ontario - Ca

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

The Official Ministry of Transportation (MTO) Driver's Handbook - Ontario - Ca

Uploaded by

Copyright:

Available Formats

12/02/2024, 13:40 The Official Ministry of Transportation (MTO) Driver’s Handbook | ontario.

The Official Ministry of Transportation

For more information about driver licensing, visit Ministry of Transportation

To request a copy of this book in an alternate format, contact Publications Ontario at

Disponible en français. Demandez le « Guide officiel de l'automobiliste de publié par le

Driving is a privilege - not a right

Getting Your Driver’s Licence

Requirements for driving in Ontario

Driver’s Licence Classification Chart

Allowed to drive any tractor–trailer combination

Allowed to drive any school purposes bus

Allowed to drive any regular bus

Allowed to drive any school purposes bus - maximum of 24-passenger capacity

Allowed to drive any motorcycles, including motor tricycles, limited-speed motorcycles

Class M with L condition

Holders may operate a limited-speed motorcycle or moped only.

Class M2 with L condition

Holders may operate a limited-speed motorcycle or moped only.

Class M with M condition

Holders may operate a motor tricycle only.

Class M2 with M condition

Holders may operate a motor tricycle only.

What kind of licence?

Applying for a licence

Passport (Canadian or foreign)

Canadian Citizenship Card with photo

Permanent immigration documents

Permanent Resident Card (PRC)

Record of Landing (Form 1000)

Confirmation of Permanent Residence (Form IMM 5292)

Temporary immigration documents

Student Authorization (IMM 1442)

Employment Authorization(IMM 1442)

Visitor Record (IMM 1442)

Temporary Resident’s Permit (IMM 1442)

Report Pursuant to the Immigration Act (IMM 1442 with photo)

Canadian or U.S. Birth Certificate

Proof of legal name

Marriage certificate (Canadian or foreign, government-issued)

Note: Direct identification by a parent or guardian is not acceptable.

Graduated licensing requirements

Here are the rules you must follow at each level:

Level One (Class G1)

G1 knowledge test – checklist

G1 exit test – checklist

Level Two (Class G2)

G2 exit test – checklist

Level One (Class G1)

Each person in the vehicle must have a working seatbelt.

You must not drive between midnight and 5 a.m.

G1 knowledge test – checklist

Bring the following items to the test:

Two pieces of identification

Money for test fees – cash, debit or credit card

Glasses or contact lenses (if you need to wear them to drive)

G1 exit test – checklist

Bring the following items to the test:

Vehicle in good working order