Project N° Unit Document Code Serial N° Rev.

Page
2342 AA00 ML 258 0 1/5

KARBALA REFINERY FEED PROJECT

SCOP – IRAQ (Contract n° 2171)
The present document or drawing is property of TECHNIP ITALY S.p.A. and shall not, under any circumstances, be totally or partially, directly or indirectly, transferred, reproduced, copied, disclosed or used, without its prior written consent, for any purpose and in any way other than that for which

MACHINERY DESIGN RULES

it is specifically furnished or outside the extent of the agreed upon right of use.

0 25/9/2009 ISSUE FOR FEED M.BERTOLINO R.ZANNORI R.ZANNORI / M.FELICI

A 28/8/2009 ISSUE FOR REVIEW M.BERTOLINO R.ZANNORI R.ZANNORI / M.FELICI

REV. DATE STATUS WRITTEN BY CHECKED BY APPROV./AUTHOR. BY
(name & visa) (name & visa) (name & visa)
DOCUMENT REVISIONS
 Project N° Unit Document Code Serial N° Rev. Page
2342 AA00 ML 258 0 2/5

KARBALA REFINERY FEED PROJECT

SCOP – IRAQ (Contract n° 2171)
The present document or drawing is property of TECHNIP ITALY S.p.A. and shall not, under any circumstances, be totally or partially, directly or indirectly, transferred, reproduced, copied, disclosed or used, without its prior written consent, for any purpose and in any way other than that

1. SCOPE

1.1 This specification establishes the minimum requirements, codes and standards to be
followed by the EPC contractor for the design and procurement of machinery for a new
SCOP refinery to be located in Karbala;

1.2 During FEED stage, the use of this specification will be limited to the contractual
framework and scope of work of Karbala FEED Project.

0
2. APPLICABLE CODES AND STANDARDS

2.1 Machinery, drivers, accessories and ancillary equipment (such as gear reducers,
couplings, lube oil system, sealing systems, coolers etc.) shall be designed, fabricated
and tested in accordance with the applicable codes, standards and specifications herein
mentioned and/or listed in the Material Requisition issued by EPC Contractor.

API Std 610 / ISO 13709 Centrifugal pumps for petroleum, petrochemical and
natural gas industries

API Std 611 General purpose steam turbines for petroleum,

chemical and gas industry services

API Std 612 / ISO 10437 Special purpose steam turbines for petroleum,
petrochemical and natural gas industries

API Std 613 Special purpose gear units for petroleum, chemical
and gas industry services

API Std 614 Lubrication, shaft-sealing, and control-oil systems and

auxiliaries for petroleum, chemical and gas industry
services
for which it is specifically furnished or outside the extent of the agreed upon right of use.

API Std 616 Gas Turbines for petroleum, chemical and gas
industry services

API Std 617 Axial and Centrifugal Compressors and Expander-

Compressors for petroleum, chemical and gas industry
services

API Std 618 Reciprocating compressors for petroleum, chemical

and gas industry services

API Std 619 Rotary type positive displacement compressors for

petroleum, petrochemical and natural gas industries
 Project N° Unit Document Code Serial N° Rev. Page
2342 AA00 ML 258 0 3/5

KARBALA REFINERY FEED PROJECT

SCOP – IRAQ (Contract n° 2171)
The present document or drawing is property of TECHNIP ITALY S.p.A. and shall not, under any circumstances, be totally or partially, directly or indirectly, transferred, reproduced, copied, disclosed or used, without its prior written consent, for any purpose and in any way other than that

API Std 670 Machinery Protection Systems

API Std 671 / ISO 10441 Special Purpose Couplings for petroleum, chemical
and gas industry services

API Std 672 Packaged, integrally geared centrifugal air

compressors for petroleum, chemical and gas industry
services

API Std 673 Centrifugal Fans for petroleum, chemical and gas
industry services

API Std 674 Positive displacement pumps - reciprocating

API Std 675 Positive displacement pumps - controlled volume

API Std 676 Positive displacement pumps - rotary

API Std 677 General purpose gear units for petroleum, chemical
and gas industry services

API Std 681 Liquid ring vacuum pumps and compressors

API Std 682 / ISO 21049 Shaft-sealing systems for centrifugal and rotary pumps

API Std 685 Sealless centrifugal pumps for petroleum, heavy-duty

chemical and gas industry services

ASME PTC Performance test codes 0

ANSI / Hydraulic Institute Centrifugal pumps test

ANSI B73.1 Horizontal, end suction centrifugal pumps

ANSI B73.2 Vertical in-line centrifugal pumps

for which it is specifically furnished or outside the extent of the agreed upon right of use.

NFPA 20 Standard for the installation of stationary fire pumps

for fire protection 0

ANSI / AGMA 6011 Specification for high speed helical gear units

ANSI / AGMA 6013 Standard for industrial enclosed gear drives

Heat Exchangers Institute Standards for steam surface condensers

ASME / ANSI B31 Standards for pressure piping

ASME / ANSI B16 Standards of pipes and fittings

 Project N° Unit Document Code Serial N° Rev. Page
2342 AA00 ML 258 0 4/5

KARBALA REFINERY FEED PROJECT

SCOP – IRAQ (Contract n° 2171)
The present document or drawing is property of TECHNIP ITALY S.p.A. and shall not, under any circumstances, be totally or partially, directly or indirectly, transferred, reproduced, copied, disclosed or used, without its prior written consent, for any purpose and in any way other than that

ASTM Materials specifications

NACE MR 0103 Materials resistant to sulfide stress cracking in

corrosive petroleum refining environments

NACE MR 0175 / ISO 15156 Materials for use in H2S-containing environments in oil
and gas production

ASME BPVC section II Materials

ASME BPVC section V Non destructive examinations

ASME BPVC section VIII Design and fabrication of pressure vessels

ASME BPVC section IX Welding and brazing

TEMA Class R Heat exchangers

IEC / CENELEC Electrical systems 0

API RP 505 Recommended practice for classification of locations

for electrical installations at petroleum facilities 0
classified as Class I, Zone 0, Zone 1 and Zone 2

0
2.2 Unless otherwise specified, the latest edition of the above codes shall be used.

2.3 Unless otherwise specified, equipment not listed above will be designed, manufactured 0
and tested according to manufacturer’s standards.

2.4 During the EPC phase, the EPC Contractor will include further machinery functional
specifications in the Material Requisitions, in addition to the API standards and project
specifications, for SCOP approval. The functional specifications – if needed – will be
for which it is specifically furnished or outside the extent of the agreed upon right of use.

implemented on the basis of particular machinery design characteristics and project

developments.

3. DOCUMENTS PRIORITY

3.1 In case of conflict among all the applicable documents as data sheets, project
specifications, standards and codes, the following order shall govern, unless otherwise
specified in the Engineering Standards:

- Local Codes, Laws and Regulations

 Project N° Unit Document Code Serial N° Rev. Page
2342 AA00 ML 258 0 5/5

KARBALA REFINERY FEED PROJECT

SCOP – IRAQ (Contract n° 2171)
The present document or drawing is property of TECHNIP ITALY S.p.A. and shall not, under any circumstances, be totally or partially, directly or indirectly, transferred, reproduced, copied, disclosed or used, without its prior written consent, for any purpose and in any way other than that

- Data Sheets
- Technical Attachments to MR (Client and Project Specifications, Particular
Technical Specification, etc.)
- International Codes and Standards

3.2 Any ambiguity or contradiction among the documents of the same priority shall be
brought, in writing, to the attention of SCOP for resolution.
for which it is specifically furnished or outside the extent of the agreed upon right of use.