1

Ultra-Miniature
Precision
TCXO / VCTCXO
Description Features:
Model: Cxx - Series
2111 Comprehensive The Connor-Winfield 2.5x3.2mm
Drive 2.5V or 3.3V Operation
Temperature Compensated
Aurora, Illinois 60505 Crystal Oscillators and Voltage Clipped Sinewave Output Logic
Phone: 630- 851- 4722 Controlled Temperature Ulta-Miniature 2.5x3.2mm SMT Package
Compensated Crystal Oscillators Frequency Stabilities Available:
Fax: 630- 851- 5040 ±0.50ppm, ±1.00ppm,
are designed for use in GPS applications
www.conwin.com requiring tight frequency stability over the ±1.50ppm, ±2.00ppm
-30 to 85°C temperature range. Through Temperature Ranges Available: -30 to
US Headquarters:
630-851-4722 the use of Analog Temperature 85°C Low Power <2mA
European Headquarters: Compensation, this device is capable of Low Jitter <1pS RMS
+353-61-472221 holding sub 1-ppm stabilities over the Tape and Reel Packaging
wide temperature range. RoHS Compliant / Lead Free

Applications
Pad Connections
GPS Receivers Pad Connection
1 Voltage Control (VCTCXO)
N/C (TCXO)
2 Ground
3 Output
4 Supply, Vcc

Package Layout Suggested Pad Layout

0.055 Max.
0.098 (1.40mm Max.) 0.0325
0.039
(2.50mm) (0.83mm)
(1.00mm)
0.037 0.037
(0.94mm) (0.94mm)
C31 8J
20.000

0.121
0.128 0.025 0.035
(3.20mm) (0.64mm) 0.071 (3.08mm) (0.89mm)
(1.80mm)

0.0625
(1.59mm)
Pin 1 0.027
Dimensional Tolerance:
(0.69mm)
0.094 +/-005 (+/-0.127mm) 0.035
(2.38mm) (0.89mm)

Ordering Information

C 3 020.0M
Type: Frequency Stability: Output Frequency:
Features: Frequency Format
Precision 1 = TCXO, 2.5Vdc, -30 to 85°C -xxx.xM Min.*
1= ± 0.50 ppm
TCXO 2 = VCTCXO, 2.5Vdc, -30 to 85°C -xxx.xxxxxxM Max.*
2= ± 1.00 ppm
VCTCXO 3 = TCXO, 3.3Vdc, -30 to 85°C *Amount of numbers
3= ± 1.50 ppm after the decimal point.
2.5x3.2mm 4 = VCTCXO, 3.3Vdc, -30 to 85°C 4= ± 2.00 ppm M = MHz
Package

Bulletin Tx211 Example Part Number:

Date
24 Sep 2008
Page 1 of2
Revision P03
C utput Frequency 20.0MHz
3 Please consult the factory for available frequencies.
1
- Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
0
2
0
.
0
M

2
.
5
x
3
.
2
m
m
,

T
C
X
O
,

C
l
i
p
p
e
d

S
i
n
e
w
a
v
e
,

3
.
3
V
d
c
,

t
o

7
0
C
,

+
/
-
0
.
5
0
p
p
m
,

O
 2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630-851-5040

www.conwin.com

Model Specifications
Model Number C11 C31 C21 C42 Note Features
TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Cxx - Series
Supply Voltage 2.5Vdc 3.3Vdc 2.5Vdc 3.3Vdc
Frequency Stability ±0.50ppm 1
2.5V or 3.3V Operation
Temperature Range -30 to 85°C
Model Number C12 C32 C22 C42 Note
Clipped Sinewave Output Logic
TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO
Ulta-Miniature 2.5x3.2mm SMT Package
Supply Voltage 2.5Vdc 3.3Vdc 2.5Vdc 3.3Vdc Frequency Stabilities Available:
Frequency Stability ±1.00ppm 1 ±0.50ppm, ±1.00ppm,
Temperature Range -30 to 85°C ±1.50ppm, ±2.00ppm
Model Number C13 C33 C23 C43 Note Temperature Ranges Available: -30 to
TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO 85°C
Supply Voltage 2.5Vdc 3.3Vdc 2.5Vdc 3.3Vdc Low Power <2mA
Frequency Stability ±1.50ppm 1 Low Jitter <1pS RMS
Temperature Range -30 to 85°C Tape and Reel Packaging
Model Number C14 C34 C24 C44 Note RoHS Compliant / Lead Free
TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Recommended for new designs
Supply Voltage 2.5Vdc 3.3Vdc 2.5Vdc 3.3Vdc
Frequency Stability ±2.0ppm 1
Temperature Range -30 to 85°C Test Circuit
Note: 1) Frequency stability vs. change in temperature. [±(Fmax – Fmin)/2.Fo]. AC Coupling

Electrical Specifications for all Models Vcc

S
upply
V
oltage 4 3
Capacitor Output

Absolute Maximum Ratings 10 pF*

10Kohm
.01 uF
Parameter Units Minimum Nominal Maximum Units Note Bypass
1 2
N/C - TCXO
Storage Temperature -55 - 125 °C VC - VCTCXO

Supply Voltage (Vcc) -0.5 - 6.0 Vdc

* NPO Grade Capacitor
Input Voltage (Vc) -0.5 - Vcc+0.5 Vdc
Operating Specifications
Parameter Minimum Nominal Maximum Units Note
Output Waveform
Frequency Range 10 - 40 MHz
Frequency Calibration (TCXO Models) -1.00 - 1.00 ppm
Aging per Year -1.00 - 1.00 ppm
Supply Voltage Variation. (Vcc±5%) -0.025 - 0.025 ppm
Load Coefficient, ±5% -0.025 - 0.025 ppm
Static Temperature Hysteresis -0.4 - 0.4 ppm 2
Frequency shift after reflow soldering -1.00 - 1.00 ppm
Supply Voltage 2.5v Models (Vcc) 2.375 2.500 2.625 Vdc
3.3V Models (Vcc) 3.135 3.300 3.465 Vdc
Supply Current (Icc) - - 2 mA
Period Jitter - 3 5 ps rms
Phase Jitter (BW=12kHz to 20MHz) - 0.5 1 ps rms
SSB Phase Noise at 10Hz offset - -80 - dBc/Hz
SSB Phase Noise at 100Hz offset - -110 - dBc/Hz

10ns 200mV

Solder Profile

Temperature
260°C
SSB Phase Noise at 1KHz offset - -130 - dBc/Hz 260°C

SSB Phase Noise at >10KHz offset - -145 - dBc/Hz 220°C

180°C
Input Characteristics 150°C
120°C
Parameter Minimum Nominal Maximum Units Notes
Control Voltage Range 2.5v Models (Vc) 0.2 1.2 2.2 Vdc
3.3v Models (Vc) 0.5 1.5 2.5
0
Frequency Tuning ±10 - - ppm Time
120 S
 Max.
Linearity ±5 - - % 60 S
Max.
Slope Positive 360 Sec. Max.

Clipped Sinewave Output Characteristics

Parameter Minimum Nominal Maximum Units Notes
Load - 10KOhm//10pF -
Output Voltage 1.00 - - V pk-pk DC Coupled
US Headquarters:
630-851-4722
Package Characteristics European Headquarters:
Package Ceramic Surface Mount Package. +353-61-472221
Environmental Characteristics
Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A Bulletin Tx211
Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
Soldering: See solder profile.
Page 2 of 2
Sollderability Sollderability per Mil Std 883E Method 2003 Revision P03
2) Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25ºC. Date 24 Sep 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation