CR 953 Afaehqqe
CR 953 Afaehqqe
CR 953 Afaehqqe
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. The Grundfos cartridge shaft seal ensures high
reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe
connection is via DIN flanges.
Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means of two coupling
guards. The long coupling makes it possible to replace the shaft seal without removing the motor from the pump.
The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and vent
screw.
The base is made of cast iron and mounted on a separate cast-iron base plate.
Both the inlet and the outlet side of the base have two pressure gauge tappings.
The pump is secured to the foundation by four bolts through the base plate.
The flanges are fastened to the base by means of locking rings.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is
flange-mounted with free-hole flange (FF).
Motor-mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The protection
reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset
cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local
regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center.
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Materials:
Base: Ductile cast iron
EN 1563 EN-GJS-500-7
ASTM A536-84 65-45-12
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: WC/WC
Support bearing: Graflon
Material certified according to: European standards
Installation:
t max amb: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
Type of connection: DIN
Size of inlet connection: DN 100
Size of outlet connection: DN 100
Pressure rating for connection: PN 16
Flange size for motor: FF300
Electrical data:
Motor standard: IEC
Motor type: 180MB
IE Efficiency class: IE3
Rated power - P2: 22 kW
Power (P2) required by pump: 22 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y V
Rated current: 39.5/22.8 A
Starting current: 830 %
Cos phi - power factor: 0.90-0.90
Rated speed: 2950 rpm
IE efficiency: IE3 92,7%
Motor efficiency at full load: 92.7-92.7 %
Motor efficiency at 3/4 load: 93.7 %
Motor efficiency at 1/2 load: 94.4 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U17530
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 239 kg
Stages: 3 20 40
Impellers: 3 10 20
Number of reduced-diameter impellers: 0
0 0
Low NPSH: N 0 20 40 60 80 100 Q [m³/h]
Pump orientation: Vertical Pumped liquid = Water
Liquid temperature during operation = 20 °C
Shaft seal arrangement: Single
Density = 998.2 kg/m³
Code for shaft seal: HQQE P NPSH
[kW] [m]
Approvals: CE,EAC,UKCA,SEPRO
25 25
P1
Approvals for drinking water: ACS
20 P2 20
Curve tolerance: ISO9906:2012 3B
Pump version: A
15 15
Model: A
Cooling: IC 411 10 10
Materials:
Base: Ductile cast iron 5 5
140
40
275
225
100
350
18.5
x
4
900
4XG8
N/A
18
1/2
Base:
x
G 1/2
350
552
318
204
65-45-12 204
318
Impeller: Stainless steel
Impeller: EN 1.4301
Impeller: AISI 304
552
Material code: A
Code for rubber: E 350
Installation: 8 x 18
4 X G 1/2
t max amb: 60 °C N/A
4 x 18.5
Maximum operating pressure: 16 bar
150
180
220
140
40
Description Value
Power (P2) required by pump: 22 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y
V
Rated current: 39.5/22.8 A
Starting current: 830 %
Cos phi - power factor: 0.90-0.90
Rated speed: 2950 rpm
IE efficiency: IE3 92,7%
Motor efficiency at full load: 92.7-92.7 %
Motor efficiency at 3/4 load: 93.7 %
Motor efficiency at 1/2 load: 94.4 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: PTC
Motor No: 85U17530
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 239 kg
Gross weight: 303 kg
Shipping volume: 1.14 m³
Danish VVS No.: 386030030
Finnish LVI No.: 4925537
Thrust handling device: N
Country of origin: DK
Custom tariff no.: 84137000