Company name:

Created by:
Phone:

Date: 01/08/2024
Qty. Description
1 CR 10-7 A-A-A-E-HQBE

Note! Product picture may differ from actual product

Product No.: On request

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe
handling, and easy access and service. Power transmission is via a rigid split coupling.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition
(CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint
particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment.
The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means
of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and vent screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.

Printed from Grundfos Product Centre [2024.30.001] 1/8

 Company name:
Created by:
Phone:

Date: 01/08/2024
Qty. Description
1 Seal faces:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: carbon graphite, resin-impregnated
This material pairing has a very good corrosion resistance and is especially suitable for water up to 90 °C.
The seal life will be reduced significantly at temperatures above 90 °C.
The material pairing is not recommended for liquids containing particles as this will result in heavy wear on the SiC
face.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring
offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades
ensure a high efficiency.

The base is made of cast iron. The oval flanges are bolted to the base. The outlet side of the base has a drain plug.
The pump is secured to the foundation by four bolts through the base plate.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is
flange-mounted with free-hole flange (FF).
Motor-mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as premium efficiency in accordance with EISA2007.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The protection
reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset
cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local
regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center.
Technical data

Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Technical:
Pump speed on which pump data are based: 3526 rpm
Actual calculated flow: 3.382 l/s
Resulting head of the pump: 83.93 m

Printed from Grundfos Product Centre [2024.30.001] 2/8

 Company name:
Created by:
Phone:

Date: 01/08/2024
Qty. Description
1 Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQBE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC

Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / 0 °C
Type of connection: Oval / Rp
Size of inlet connection: 1 1/2 inch
Size of outlet connection: 1 1/2 inch
Pressure rating for connection: PN 16
Flange size for motor: FF265

Electrical data:
Motor standard: IEC
Motor type: 132SC
Rated power - P2: 5.5 kW
Power (P2) required by pump: 5.5 kW
Mains frequency: 60 Hz
Rated voltage: 3 x 220-277D/380-480Y V
Rated current: 18,4-16,2/10,6-9,30 A
Starting current: 1020-1480 %
Cos phi - power factor: 0.90-0.80
Rated speed: 3510-3550 rpm
IE Efficiency class: NEMA Premium / IE3 60Hz
Motor efficiency at full load: 89.5 %
Motor efficiency at 3/4 load: 90.3-89.9 %
Motor efficiency at 1/2 load: 89.9-87.9 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U07417

Controls:
Frequency converter: None

Others:
Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.70
Net weight: 85 kg
Gross weight: 107 kg
Shipping volume: 0.234 m³

Printed from Grundfos Product Centre [2024.30.001] 3/8

 Company name:
Created by:
Phone:

Date: 01/08/2024

On request CR 10-7 A-A-A-E-HQBE 60 Hz

H CR 10-7, 3*380 V, 60Hz eta
[m] [%]

110

100 100

90 90

80 80

70 70

60 60

50 50

40 40

30 30

20 20

10 10

0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 Q [l/s]
Q = 3.382 l/s H = 83.93 m
n = 3538 rpm Pumped liquid = Water
Liquid temperature during operation = 20 °C Density = 998.2 kg/m³
Eta pump = 70.1 % Eta pump+motor = 63.4 %
P NPSH
[kW] [m]

5 10
P1

4 P2 8

3 6

2 4

1 2

0 0
P1 = 4.381 kW
P2 = 3.961 kW
NPSH = 2.98 m

Printed from Grundfos Product Centre [2024.30.001] 4/8

 Company name:
Created by:
Phone:

Date: 01/08/2024
H CR 10-7, 3*380 V, 60Hz eta
Description Value [m] [%]
General information:
110
Product name: CR 10-7 A-A-A-E-HQBE
100 100

Product No: On request 90 90

EAN number: On request 80 80

Technical: 70 70
Pump speed on which pump data are 3526 rpm 60 60
based:
50 50
Actual calculated flow: 3.382 l/s
Resulting head of the pump: 83.93 m 40 40

Maximum head: 104 m 30 30

Stages: 7 20 20
Impellers: 7 10 10
Number of reduced-diameter impellers: 0
0 0
Low NPSH: N 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Q [l/s]
Pump orientation: Vertical Q = 3.382 l/s H = 83.93 m
n = 3538 rpm Pumped liquid = Water
Shaft seal arrangement: Single
Density = 998.2 kg/m³ Eta pump = 70.1 %
Code for shaft seal: HQBE Eta pump+motor = 63.4 %
Liquid temperature during operation = 20 °C
Approvals: CE,EAC,UKCA,SEPRO
P NPSH
Approvals for drinking water: WRAS [kW] [m]
P1
Curve tolerance: ISO9906:2012 3B
4 8
Pump version: A P2
Model: A 3 6

Materials: 2 4
Base: Cast iron
1 2
Base: EN 1561 EN-GJL-200
0 0
Base: ASTM A48-25B
P1 = 4.381 kW
Impeller: Stainless steel P2 = 3.961 kW
Impeller: EN 1.4301 NPSH = 2.98 m
20

80

178 215
256
200

100
130
550

M12 X4
145
x
2 3.5
7

RP1/2
G 1 1/2

Impeller: AISI 304

G 1/2 300
391

134
220

Material code: A 134

220
Code for rubber: E
Bearing: SIC
Installation:
391

Maximum ambient temperature: 60 °C

Maximum operating pressure: 16 bar 300
G 1/2 G 1/2
Max pressure at stated temp: 16 bar / 120 °C
Max pressure at stated temp: 16 bar / 0 °C
550

Type of connection: Oval / Rp G 1/2

RP 1 1/2
27 M12 X 45
Size of inlet connection: 1 1/2 inch
4 x 13.5
Size of outlet connection: 1 1/2 inch
20
80

100
Pressure rating for connection: PN 16 130
178 215

Flange size for motor: FF265 200 256

Connect code: A
Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 °C
Selected liquid temperature: 20 °C +T +T +T

Density: 998.2 kg/m³

Electrical data:
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE

Motor standard: IEC TO AMPLIFIER

RELAY

Motor type: 132SC L1 L2 L3

Rated power - P2: 5.5 kW

THERMISTORS PTC ACCORDING TO DIN 44082

Power (P2) required by pump: 5.5 kW

+T +T +T
Mains frequency: 60 Hz
Rated voltage: 3 x 220-277D/380-480Y
V
Rated current: 18,4-16,2/10,6-9,30 A TO AMPLIFIER
RELAY
L1 L2 L3
Starting current: 1020-1480 %

Printed from Grundfos Product Centre [2024.30.001] 5/8

 Company name:
Created by:
Phone:

Date: 01/08/2024

Description Value
Cos phi - power factor: 0.90-0.80
Rated speed: 3510-3550 rpm
IE Efficiency class: NEMA Premium / IE3
60Hz
Motor efficiency at full load: 89.5 %
Motor efficiency at 3/4 load: 90.3-89.9 %
Motor efficiency at 1/2 load: 89.9-87.9 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: PTC
Motor No: 85U07417
Controls:
Frequency converter: None
Others:
Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.70
Net weight: 85 kg
Gross weight: 107 kg
Shipping volume: 0.234 m³
Sales region: Saudi Arabia

Printed from Grundfos Product Centre [2024.30.001] 6/8

 Company name:
Created by:
Phone:

Date: 01/08/2024

On request CR 10-7 A-A-A-E-HQBE 60 Hz

M12 X 45

13.5
RP 1 1/2

x
4

100

215
256
20
G 1/2

27

130
178
220

200
134

G 1/2

G 1/2
300

80

391 550

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2024.30.001] 7/8

 Company name:
Created by:
Phone:

Date: 01/08/2024

On request CR 10-7 A-A-A-E-HQBE 60 Hz

+T +T +T

CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY

IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
TO AMPLIFIER
RELAY
L1 L2 L3

THERMISTORS PTC ACCORDING TO DIN 44082

+T +T +T

TO AMPLIFIER
RELAY
L1 L2 L3

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.30.001] 8/8