Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 261 views

    Bosch mg7.9.8 Kia

    Uploaded by

    Kwun Hok Chong
    This document provides information about connecting to and managing the Bosch MG7.9.8 transmission control unit micro used in some Kia vehicles. It details the necessary cable, pin connections, and jumper settings for reading from and writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bosch mg7.9.8 Kia

    Uploaded by

    Kwun Hok Chong
    261 views4 pages
    This document provides information about connecting to and managing the Bosch MG7.9.8 transmission control unit micro used in some Kia vehicles. It details the necessary cable, pin connections, and jumper settings for reading from and writing to the ECU.

    Original Title

    bosch_mg7.9.8_kia

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about connecting to and managing the Bosch MG7.9.8 transmission control unit micro used in some Kia vehicles. It details the necessary cable, pin connections, and jumper settings for reading from and writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    261 views4 pages

    Bosch mg7.9.8 Kia

    Uploaded by

    Kwun Hok Chong
    This document provides information about connecting to and managing the Bosch MG7.9.8 transmission control unit micro used in some Kia vehicles. It details the necessary cable, pin connections, and jumper settings for reading from and writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    BOSCH MG798 KIA

    1 BOSCH MG7.9.8 KIA


    1.1 PLUGIN 1798
    This plugin manages the micro of the Transmission Control Unit (TCU).

    1.2 MG7.9.8

    https://ecu.design
    BOSCH MG798 KIA

    https://ecu.design
    BOSCH MG798 KIA

    1.3 DIRECT CONNECTION


    In order to connect to the ECU use the cable F32GN037C/D .
    Make sure that the POWER led (red) on NEW TRASDATA is ON.
    WIRE COLOUR DESCRIPTION
    Red +12 V
    Orange VKEY
    Black GND
    Yellow KLINE
    Green CAN L
    White CAN H
    Grey BOOT
    Blue CNF1
    Purple - Grey VPP
    Brown RESET

    1.4 ECU CONNECTOR

    https://ecu.design
    BOSCH MG798 KIA

    1.5 BOOT/CNF1 DIRECT CONNECTION


    Connect the BOOT and CNF1 pins to the grey and blue wires of the cable F32GN037C/D .
    WIRE COLOUR DESCRIPTION
    Grey BOOT
    Blue CNF1

    ATTENTION

    For reading and writing operations, it is necessary to make the 2 LINK jumpers between the pads as
    displayed in the picture here below.
    Remove the LINK jumpers before reinstalling the ECU back into the vehicle.

    https://ecu.design

    You might also like