ROMA INSULATION SYSTEMS

Product
range
Everything you need to know
about ROMA and our products
in one document.

All roads
lead to
» Believing is
one thing.
With ROMA you
really know. «
ROMA production employee Franz Lechner
has ensured consistently high quality
for over 30 years.
Wall panels

PIR wall panels, type P

ROMA quick-assembly insulating panels, type P, combine a lightweight design with
wide purlin spacing, straightforward joint technology and logical instructions for
easy, time-saving assembly. The uniquely double tongue-and-groove joints, with a
labyrinth effect, are free of thermal bridges and remilled to ensure airtight construction
of exterior walls. You can use our insulation panels as wall or roof panels.

Panel type P045 P060 P080 P100 P120 P140 P170 P200 P220
Panel thickness mm 45 60 80 100 120 140 170 200 220
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Panel weight approx. kg /m2 11.1 11.7 12.5 13.3 14.1 14.9 16.1 17.3 18.1
U-value certified to EN 14509 with joint 1) W/(m2 · K) 0.540 0.388 0.285 0.226 0.187 0.160 0.131 0.111 0.101
Values for Cold-store and deep-freeze construction
Cladding layers internal & external mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 The module width for all
Panel weight approx. kg /m2 12.1 12.7 13.5 14.3 15.1 15.9 17.1 18.3 19.1 PIR type P wall panels
Roof element spans, self-supporting single-field load-bearing units depending on load type 2) EN 14509 without bending is 1,150 mm.
m to to to to to to to to to
5.11 6.31 7.70 8.73 10.31 10.56 11.23 11.89 12.25

Wall panels

PIR wall panels, type M

ROMA quick-assembly insulating panels, type M, with concealed fittings, enable
an aesthetic and highly varied design of structural surfaces, while remaining
cost-efficient. With ROMA, you can achieve highly attractive architecture for
industrial and commercial buildings even under demanding conditions.

Panel type M060 M080 M100 M120 M140 M170

Panel thickness mm 60 80 100 120 140 170
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6 0.6
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5 0.5
Panel weight approx. kg /m2 12.7 13.5 14.3 15.1 15.9 17.1
U-value certified to EN 14509 W/(m2 · K) 0.448 0.300 0.234 0.192 0.163 0.133
The module width for all
with joint 1)
PIR type M wall panels
is 1,000 mm.

Fire protection, soundproofing and thermal insulation

MW wall panel, type FP

Our type FP fireproof wall panel with its noncombustible insulating stone wool core
delivers outstanding fire protection and soundproofing and is perfect for external wall
construction and extensions inside buildings. This panel model is available in eight
insulating thicknesses and two densities.

Panel type FP060 FP080 FP100 FP120 FP140 FP150 FP170 FP200 FP240
Density kg /m³ 120
Panel thickness mm 60 80 100 120 140 150 170 200 240
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Panel weight approx. kg /m2 16.5 18.9 21.3 23.7 26.1 27.4 29.7 33.3 38.1 The module width for all
U-value certified to EN 14509 with joint W/(m2 · K) 0.736 0.550 0.441 0.368 0.317 0.296 0.261 0.222 0.186 MW type FP wall panels
Panel type FP eco FP eco FP eco FP eco FP eco FP eco FP eco FP eco FP eco is 1,150 mm.
060 080 100 120 140 150 170 200 240
Density kg /m³ 90
Panel weight approx. kg /m2 14.7 16.5 18.3 20.1 21.9 22.8 24.6 27.3 30.9
U-value certified to EN 14509 with joint W/(m2 · K) 0.648 0.482 0.386 0.322 0.276 0.258 0.228 0.194 0.162

1) λdeclared = 0.022 [W/mK]

 6

MW wall panel, type FV

Our type FV noncombustible wall panel with its insulating, noncombustible stone wool
core comes in eight different insulating thicknesses and two densities. ROMA thus offers
solutions for fire protection and soundproofing meeting a wide range of requirements.
The fine microprofiling and hidden fixing allow aesthetic wall and façade designs.

Panel type FV060 FV080 FV100 FV120 FV140 FV150 FV170 FV200 FV240
Density kg /m³ 120
Panel thickness mm 60 80 100 120 140 150 170 200 240
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Panel weight approx. kg /m2 16.8 19.2 21.6 24.0 26.4 27.4 30.0 33.6 38.4
U-value certified to EN 14509 with joint W/(m2 · K) 0.861 0.585 0.459 0.380 0.325 0.303 0.267 0.227 0.190
The module width for all
Panel type FV eco FV eco FV eco FV eco FV eco FV eco FV eco FV eco FV eco
060 080 100 120 140 150 170 200 240 MW type FV wall panels
Density kg /m³ 90 is 1,000 mm.
Panel weight approx. kg /m2 15.0 16.8 18.6 20.4 22.2 23.1 24.9 27.6 31.2
U-value certified to EN 14509 with joint W/(m2 · K) 0.758 0.513 0.402 0.332 0.284 0.265 0.233 0.197 0.165

Fire protection, soundproofing and thermal insulation

MW acoustic panel, type AFP

Do you require construction elements for acoustic absorption and improving room
acoustics? The ROMA MW acoustic panel, type AFP, featuring a rock wool insulating core
and one-sided perforated sheet steel is just what you need. A layer of black fiberglass
matting between the stone wool and perforated plate provides trickling protection. With
an AFP eco060, ROMA already achieves the highest sound absorption class A.

Panel type AFP060 AFP080 AFP100 AFP120 AFP140 AFP170 AFP200 AFP240
Density kg /m³ 120
Panel thickness mm 60 80 100 120 140 170 200 240
Cladding layers external mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Cladding layers internal mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Panel weight approx. kg /m2 15.0 17.4 19.8 22.2 24.6 28.2 31.8 36.6
The module width for all
U-value certified to EN 14509 with joint W/(m2 · K) 0.751 0.561 0.450 0.376 0.323 0.267 0.227 0.190
MW type AFP acoustic
Panel type AFP eco AFP eco AFP eco AFP eco AFP eco AFP eco AFP eco AFP eco
060 080 100 120 140 170 200 240 panels is 1,150 mm.
Density kg /m³ 90
Panel weight approx. kg /m2 13.2 15.0 16.8 18.6 20.4 23.1 25.8 29.4
U-value certified to EN 14509 with joint W/(m2 · K) 0.648 0.482 0.386 0.322 0.276 0.228 0.194 0.162

Fire protection, soundproofing and thermal insulation

MW roof panel, type FD

The type FD mineral wool roof panel is the ideal complement for the type D roof panel
for fire areas that need to prevent flying sparks. The geometry of the two roof types is
coordinated so that laying can be carried out quickly and easily.

Panel type FD102 FD122 FD142 FD162 FD182 FD192 FD212 FD242 FD282
Density kg /m³ 120
Panel thickness mm 102 122 142 162 182 192 212 242 282
Insulation thickness mm 60 80 100 120 140 150 170 200 240
(without beading)
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Panel weight approx. kg /m2 18.3 20.7 23.1 25.5 27.9 28.6 31.5 35.1 39.9
The module width for all
U-value certified to EN 14509 with joint W/(m2 · K) 0.699 0.534 0.432 0.363 0.313 0.292 0.259 0.221 0.185
MW type FD roof panes
Panel type FD eco FD eco FD eco FD eco FD eco FD eco FD eco FD eco FD eco
102 122 142 162 182 192 212 242 282 is 1,000 mm.
Density kg /m³ 90
Panel weight approx. kg /m2 16.4 18.2 20.0 21.8 23.6 24.0 26.3 29.0 33.6
U-value certified to EN 14509 with joint W/(m2 · K) 0.615 0.468 0.378 0.317 0.273 0.255 0.226 0.192 0.161

1) λdeclared = 0.022 [W/mK]

Dachpaneele

PIR-Dachpaneel Typ RD
With the new roof panel type RD, we present you a sandwich panel that significantly
facilitates the installation of a PV system. The new ROMA roof profiling allows you to
install your photovoltaic system without having to drill into the panel outer shell.
Form-fitting, approved clamps allow for quick and easy installation of your PV system,
making the roof panel a great choice for anyone looking for a high-quality, energy-
efficient and future-proof sandwich roof.

Paneel-Typ RD082 RD102 RD122 RD142 RD162 RD182 RD212

Panel thickness mm 82 102 122 142 162 182 212
Insulation thickness (without beading) mm 40 60 80 100 120 140 170
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Die Rasterbreite für
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Panel weight approx. kg /m2 12.2 13.0 13.8 14.6 15.4 16.2 17.4
Trapez DUO 062 beträgt
U-value certified to EN 14509 with joint 1) W/(m2 · K) 0.542 0.363 0.273 0.219 0.183 0.157 0.129
1.000 mm.

Available in the standard colors RAL 7035, RAL 7016, RAL 3009, Stratos and Mesos in 50µm.
Other colors and coating systems on request.

Roof panels

PIR roof panels, type D

ROMA quick-assembly insulating panels, type D, feature factory-equipped triple sealing
which meets the highest standards in thermal insulation and moisture protection. The
high rigidity and load capacity of these panels allow wider support spacing. Longer
panel lengths and a lightweight design make construction projects highly cost efficient.

Panel type D082 D102 D122 D142 D162

Panel thickness mm 82 102 122 142 162
Insulation thickness (without beading) mm 40 60 80 100 120
Cladding layers external mm 0.6 0.6 0.6 0.6 0.6
Cladding layers internal mm 0.5 0.5 0.5 0.5 0.5
Panel weight approx. kg /m2 11.9 12.7 13.5 14.3 15.1
U-value certified to EN 14509 with joint 1) W/(m2 · K) 0.542 0.363 0.273 0.219 0.183 The module width for all
PIR type D roof panels
is 1,000 mm.

Roof panels

Trapez DUO 062

The ROMA Trapez DUO 062 is an ideal panel for refurbishment projects. Its PIR coating
keeps condensation from forming on inner roof surfaces. A sealing strip in the
overlapping bead protects against the penetration of moisture. Like all ROMA
elements, the ROMA Trapez DUO can be quickly and efficiently installed. We recom-
mend the ROMA quick-assembly insulating panels D082 to D182 for heated buildings
and areas that are accessible to the public.

Panel type DUO 062

Panel weight approx. kg /m2 7.4
U-value certified to EN 14509 with joint W/(m2 · K) 1.049
The module width for
Trapez DUO 062 panels
is 1,000 mm.

1) λdeclared = 0.022 [W/mK]

2) Including repair load of P = 1.0kN, both sides t = 0.6mm, profiled on both sides
Accessories

Accessories
ROMA offers not only first-class products but also a broad range of accessories – with
the tried and tested ROMA quality integrated in every last detail. We have everything
from cover plates to fixing caps, from Internal ridge flashing to ceiling suspensions. All
from a single source and specifically coordinated to each other – so that everything fits. Ridge flashing Element enclosure
The accessary parts depicted here are taken from our accessories catalog.

Cold-store and deep-freeze cells

Cold-store and deep-freeze cells

As a partner to the refrigeration trade, ROMA offers extensive support for your construction
project. You can be sure that all requirements will be considered during planning and that
your individual requirements are carried out. We focus on low energy and maintenance costs.
Every cold-store cell is assembled by trained specialist personnel. They safeguard your
investment because we implement your exact specifications.

Doors

Hinged and sliding doors

Industrial doors have to handle tough conditions and are subject to high dynamic loads
and often extreme temperature fluctuations, too. They are designed to streamline
operational workflows and be easy to use. Doors have to meet very stringent require-
ments regarding construction, functional mechanics, material, sealing and insulation.
In addition, many different safety regulations for protecting people and building
facilities have to be observed. Whether it is a matter of cold-store or deep freeze
room doors, robust versions ensure long service life and a high level of user conve-
nience. ROMA doors are open for any application.

Customized construction

Customized construction
Safeguard the quality of your products with constant temperatures, protect your
investment in machines by keeping humidity constant, minimize costs by keeping
external conditions the same, protect your employees and your environment from noise,
heat and exhaust through special insulation – at any time of the year and time of day. No
matter what or whom you want to protect, ROMA offers you an individual solution. For
even more flexibility, we will in future also be offering mobile solutions down to -80 ºC.

Environmental Simulations and Test Chambers

Environmental Simulations and Test Chambers

New developments, new regulations and reliable documentation of test results are the
challenges faced by industry. Not only legislators set high environmental goals and
require their observance. Customers also want to make their contribution and demand
proof of this. The basis for this is a constant temperature, long-term tightness of all
elements and penetrations, and fire protection. Our element structure, which meets the
requirements of EI120, combines the advantages of mineral wool and polyurethane in an
optimal way. Deliver resilient results - faster and with fewer tests. A financial advantage
in current and future test procedures.
ROMA. So everything fits.
ROMA is a leading manufacturer of wall and roof sandwich panel elements for industrial and cold-store
construction. We develop, manufacture and market complete systems for industrial construction
engineering as well as cold-store and deep-freeze cell and cell door construction.
Climate test chambers, machine enclosures, and specialized climate-control applications are also
part of our product portfolio. We have over 70 years of success and experience in highly specialized
construction sectors. Ever since its founding, our family-run company has always manufactured top
quality products Made in Germany.

For more information, please visit our website:

www.romakowski.com

Optimal production ensures high product availability, so that your With over seven decades of experience, ROMA is known for its top
projects run smoothly. product engineering and dependable quality.

Thoroughly satisfied customers is the ROMA trademark – because Sustainable construction with our ROMA5 PIR foam system made
everything fits. from renewable raw materials. For more information, please visit
our website under ROMA5 BMB.
 Creative building design
The ROMA color palette for quick-assembly insulating panels.

Coating Color Coating Color Coating Color

Color Color Color
system group system group system group

RAL 9010 Pure white 1 RAL 8011 Nut brown 3 RAL 9002 Gray white 1

ROMAplus 50 μm
RAL 9001 Cream 1 RAL 8014 Sepia brown 3 Stratos 2

RAL 9002 Gray white 1 RAL 6005 Moss green 3 Mesos 2

Polyester 25 μm

RAL 7035 Light gray 1 RAL 6011 Reseda green 2 Ionos 2

RAL 7042 Traffic gray A 2 RAL 5010 Gentian blue 3 RAL 9010 Pure white 1
Polyester 25 μm

PET 55 μm
RAL 7032 Pepple grey 2 RAL 9006 White aluminum 2 RAL 9010 Pure white 1

Hard PVC foil 150 μm

RAL 1015 Light ivory 1 RAL 9007 Gray aluminum 2 RAL 9001 Cream 1

RAL 1023 Traffic yellow 2 RAL 7016 Anthracite gray 3 RAL 9010 Pure white 1
DU 15 μm
Polyester 35 μm

RAL 2001 Red orange 2 Dark Zebrano 3D 3 RAL 9002 Gray white 1
AZ 185

RAL 3000 Flame red 3 Golden Oak 2 Aluzinc 2

ROMAplus 50 μm

RAL 3009 Oxide red 3 RAL 7016 Anthracite gray 3

RAL 8004 Copper brown 3 RAL 3009 Oxide red 3 As of: 11/2023

The many options offered by the color palette for ROMA sandwich panel The colors listed here (such as 9002) approximate the RAL color standard.
elements gives you numerous creative design options. The basic material Please also note: The color patterns are print reproductions and are only
used in our panels is sheet steel. The sheet metal is galvanized on both approximations.
sides and then a plastic color coating is applied.
Minimum quantities apply for special colors.
Other colors and coating systems on request. Standard aluminum sheet
is available with RAL 9001 or RAL 9006 polyester lacquer. Please contact us about availability and delivery date.
We look forward to helping you.

Romakowski GmbH & Co. KG

Herdweg 31
86647 Buttenwiesen, Germany
GB 11/23 E

Phone +49 (0) 8274.999-0

For more information, please visit our website: Fax +49 (0) 8274.999-150
www.romakowski.com info@romakowski.com