WOOD

Current Date: 4/30/2024 4:05 PM

Units system: English
File name: C:\Users\juan.sierra\Documents\4. PROYECTOS\RIDGLINE\Hartsville\4. OWG Building fdn\Calcs\Rev 0\RAM Connection\F-4\F-4.rcnx

Steel connections
Results
_______________________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________________

Connection name : Pinned BP - HSS Member

Connection ID : 1
_______________________________________________________________________________________________________________________________

Family: Column - Base (CB)

Type: Base plate
Design code: AISC 360-16 LRFD, ACI 318-08

DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3 Load type
[kip] [kip*ft] [kip*ft] [kip] [kip]
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L25 -0.40 0.00 0.00 0.00 0.00 Design
L26 -0.40 0.00 0.00 0.00 -2.30 Design
L27 -0.40 0.00 0.00 0.00 2.57 Design
L28 -0.24 0.00 0.00 0.00 -3.06 Design
L29 -0.24 0.00 0.00 0.00 3.42 Design
L30 -0.41 0.00 0.00 0.00 0.00 Design
L31 -0.56 0.00 0.00 0.00 0.00 Design
L32 -0.48 0.00 0.00 0.00 -2.55 Design
L33 -0.48 0.00 0.00 0.00 2.85 Design
L34 -0.48 0.00 0.00 0.00 -5.10 Design
L35 -0.48 0.00 0.00 0.00 5.70 Design
L36 -0.48 0.00 0.00 0.00 0.00 Design
L37 -0.36 0.00 0.00 0.00 -5.10 Design
L38 -0.36 0.00 0.00 0.00 5.70 Design
L39 -0.36 0.00 0.00 0.00 0.00 Design
L40 0.00 0.00 0.00 0.00 0.00 Design
L41 0.00 0.00 0.00 0.00 0.00 Design
L42 0.00 0.00 0.00 0.00 0.00 Design
L43 0.00 0.00 0.00 0.00 0.00 Design
L44 0.00 0.00 0.00 0.00 0.00 Design
L45 0.00 0.00 0.00 0.00 0.00 Design
L46 0.00 0.00 0.00 0.00 0.00 Design
L47 0.00 0.00 0.00 0.00 0.00 Design
L48 0.00 0.00 0.00 0.00 0.00 Design
L49 0.00 0.00 0.00 0.00 0.00 Design
L50 0.00 0.00 0.00 0.00 0.00 Design
L51 0.00 0.00 0.00 0.00 0.00 Design
L52 0.00 0.00 0.00 0.00 0.00 Design
L53 0.00 0.00 0.00 0.00 0.00 Design
L54 0.00 0.00 0.00 0.00 0.00 Design
L55 0.00 0.00 0.00 0.00 0.00 Design
L56 0.00 0.00 0.00 0.00 0.00 Design
L57 0.00 0.00 0.00 0.00 0.00 Design
L58 0.00 0.00 0.00 0.00 0.00 Design
L59 0.00 0.00 0.00 0.00 0.00 Design
L60 0.00 0.00 0.00 0.00 0.00 Design
L61 0.00 0.00 0.00 0.00 0.00 Design
L62 0.00 0.00 0.00 0.00 0.00 Design
L63 0.00 0.00 0.00 0.00 0.00 Design

Page1
L64 0.00 0.00 0.00 0.00 0.00 Design
L65 0.00 0.00 0.00 0.00 0.00 Design
L66 0.00 0.00 0.00 0.00 0.00 Design
L67 0.00 0.00 0.00 0.00 0.00 Design
L68 0.00 0.00 0.00 0.00 0.00 Design
L69 0.00 0.00 0.00 0.00 0.00 Design
L70 0.00 0.00 0.00 0.00 0.00 Design
L71 0.00 0.00 0.00 0.00 0.00 Design
L72 0.00 0.00 0.00 0.00 0.00 Design
L73 0.00 0.00 0.00 0.00 0.00 Design
C25 -0.40 0.00 0.00 0.00 0.00 Design
C26 -0.40 0.00 0.00 0.00 -2.30 Design
C27 -0.40 0.00 0.00 0.00 2.57 Design
C28 -0.24 0.00 0.00 0.00 -3.06 Design
C29 -0.24 0.00 0.00 0.00 3.42 Design
C30 -0.41 0.00 0.00 0.00 0.00 Design
C31 -0.56 0.00 0.00 0.00 0.00 Design
C32 -0.48 0.00 0.00 0.00 -2.55 Design
C33 -0.48 0.00 0.00 0.00 2.85 Design
C34 -0.48 0.00 0.00 0.00 -5.10 Design
C35 -0.48 0.00 0.00 0.00 5.70 Design
C36 -0.48 0.00 0.00 0.00 0.00 Design
C37 -0.36 0.00 0.00 0.00 -5.10 Design
C38 -0.36 0.00 0.00 0.00 5.70 Design
C39 -0.36 0.00 0.00 0.00 0.00 Design
C40 0.00 0.00 0.00 0.00 0.00 Design
C41 0.00 0.00 0.00 0.00 0.00 Design
C42 0.00 0.00 0.00 0.00 0.00 Design
C43 0.00 0.00 0.00 0.00 0.00 Design
C44 0.00 0.00 0.00 0.00 0.00 Design
C45 0.00 0.00 0.00 0.00 0.00 Design
C46 0.00 0.00 0.00 0.00 0.00 Design
C47 0.00 0.00 0.00 0.00 0.00 Design
C48 0.00 0.00 0.00 0.00 0.00 Design
C49 0.00 0.00 0.00 0.00 0.00 Design
C50 0.00 0.00 0.00 0.00 0.00 Design
C51 0.00 0.00 0.00 0.00 0.00 Design
C52 0.00 0.00 0.00 0.00 0.00 Design
C53 0.00 0.00 0.00 0.00 0.00 Design
C54 0.00 0.00 0.00 0.00 0.00 Design
C55 0.00 0.00 0.00 0.00 0.00 Design
C56 0.00 0.00 0.00 0.00 0.00 Design
C57 0.00 0.00 0.00 0.00 0.00 Design
C58 0.00 0.00 0.00 0.00 0.00 Design
C59 0.00 0.00 0.00 0.00 0.00 Design
C60 0.00 0.00 0.00 0.00 0.00 Design
C61 0.00 0.00 0.00 0.00 0.00 Design
C62 0.00 0.00 0.00 0.00 0.00 Design
C63 0.00 0.00 0.00 0.00 0.00 Design
C64 0.00 0.00 0.00 0.00 0.00 Design
C65 0.00 0.00 0.00 0.00 0.00 Design
C66 0.00 0.00 0.00 0.00 0.00 Design
C67 0.00 0.00 0.00 0.00 0.00 Design
C68 0.00 0.00 0.00 0.00 0.00 Design
C69 0.00 0.00 0.00 0.00 0.00 Design
C70 0.00 0.00 0.00 0.00 0.00 Design
C71 0.00 0.00 0.00 0.00 0.00 Design
C72 0.00 0.00 0.00 0.00 0.00 Design
C73 0.00 0.00 0.00 0.00 0.00 Design
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Page2
 Design for major axis
Base plate (AISC 360-16 LRFD)
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Base plate
Distance from anchor to edge [in] 1.69 0.25 --
Weld size [1/16in] 4 2 -- table J2.4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Concrete base
Axial bearing [Kip/in2] 4.42 0.01 L31 0.00 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [Kip*ft/ft] 1.58 0.02 L31 0.01 DG1 Sec 3.1.2
Flexural yielding (tension interface) [Kip*ft/ft] 1.58 0.00 L25 0.00 DG1 Eq. 3.3.13
Column
Weld capacity [Kip/ft] 100.23 0.00 L25 0.00 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld shear capacity [Kip/ft] 66.82 0.00 L25 0.00 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [Kip/ft] 100.23 0.00 L25 0.00 p. 8-9,
Sec. J2.5,
Sec. J2.4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.01
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Design for minor axis

Base plate (AISC 360-16 LRFD)
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Base plate
Distance from anchor to edge [in] 1.69 0.25 --
Weld size [1/16in] 4 2 -- table J2.4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Concrete base
Axial bearing [Kip/in2] 4.42 0.01 L31 0.00 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [Kip*ft/ft] 1.58 0.02 L31 0.01 DG1 Sec 3.1.2
Flexural yielding (tension interface) [Kip*ft/ft] 1.58 0.00 L25 0.00 DG1 Eq. 3.3.13
Column
Weld capacity [Kip/ft] 100.23 0.00 L25 0.00 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld shear capacity [Kip/ft] 66.82 4.96 L35 0.07 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [Kip/ft] 100.23 0.00 L25 0.00 p. 8-9,
Sec. J2.5,
Sec. J2.4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.07
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Page3
 Major axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchors
Anchor spacing [in] 4.00 2.50 -- Sec. D.8.1
Concrete cover [in] 6.44 3.00 -- Sec. 7.7.1
Effective length [in] 5.16 -- 23.59
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Kip] 12.71 0.00 L25 0.00 Eq. D-3
Pullout of anchor in tension [Kip] 14.24 0.00 L25 0.00 Sec. D.4.1.1
Anchor shear [Kip] 5.29 0.00 L25 0.00 Eq. D-20,
Sec. D.6.1.3
Pryout of anchor in shear [Kip] 26.12 0.00 L25 0.00 Eq. D-4,
Sec. D.4.1.1
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.00
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Minor axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchors
Anchor spacing [in] 4.00 2.50 -- Sec. D.8.1
Concrete cover [in] 6.44 3.00 -- Sec. 7.7.1
Effective length [in] 5.16 -- 23.59
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Kip] 12.71 0.00 L25 0.00 Eq. D-3
Pullout of anchor in tension [Kip] 14.24 0.00 L25 0.00 Sec. D.4.1.1
Anchor shear [Kip] 5.29 1.43 L35 0.27 Eq. D-20,
Sec. D.6.1.3
Pryout of anchor in shear [Kip] 26.12 1.43 L35 0.05 Eq. D-4,
Sec. D.4.1.1
Anchors reinforcement in shear [Kip] 54.00 5.70 L35 0.11 Sec. D.5.2.9,
D.6.2.9
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.27
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Global critical strength ratio 0.27

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Page4
Biaxial
Maximum compression (L31)

------------------------------------------------------------------------------------------------------------------------------------------------------
Maximum bearing pressure 8.24 [lb/in2]
Minimum bearing pressure 8.24 [lb/in2]
Maximum anchor tension 0.00 [kip]
Minimum anchor tension 0.00 [kip]
Neutral axis angle 0.00 [deg]
Bearing length 1.2E31 [in]
------------------------------------------------------------------------------------------------------------------------------------------------------

Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[in] [in] [kip] [kip]
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1 -2.00 -2.25 0.00 0.00
2 -2.00 2.25 0.00 0.00
3 2.00 2.25 0.00 0.00
4 2.00 -2.25 0.00 0.00
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Maximum tension (L25)

------------------------------------------------------------------------------------------------------------------------------------------------------
Maximum bearing pressure 5.88 [lb/in2]
Minimum bearing pressure 5.88 [lb/in2]
Maximum anchor tension 0.00 [kip]
Minimum anchor tension 0.00 [kip]
Neutral axis angle 0.00 [deg]

Page5
 Bearing length 1.2E31 [in]
------------------------------------------------------------------------------------------------------------------------------------------------------

Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[in] [in] [kip] [kip]
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1 -2.00 -2.25 0.00 0.00
2 -2.00 2.25 0.00 0.00
3 2.00 2.25 0.00 0.00
4 2.00 -2.25 0.00 0.00
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Page6