1 000 Ohm at 0 °C (32 °F) temperature sensor Sensor probe fabrication ∅ 4 x 85 mm (0.157 × 3.352 in) The CMSS PT-1000-1 is a compact sensor PT 1000 with crimped seal Operational temperature range –50 to +175 °C (–58 to 347 °F) with integral cable for use with SKF on-line Precision Class B, –50 to +150 °C surveillance systems. The sensor is used to monitor lubrication and internal temperature Electrical Measuring current approx.. 1 mA of bearings and is easily fitted to standard Insulations resistance at 20 °C, 500 V DC 100 MOhm housings. Thermocouple is mounted directly into Environmental Cable temperature rated –50 to +250 °C (–58 to 482 °F) bearing housing greasing point, to measure Sealing IP 68 the operating temperature of the lubricant Physical itself – and not the bearing housing surface Dimensions See drawing temperature. Weight 150 grams (without cable) Operating temperature indicates bearing Case material 316L Stainless Steel Integral cable Three wire, multi-stranded conductor, wear, damage, misalignment, poor lubrica- shielded 10 m (33 ft) tion conditions or low levels. Cable jacket PTFE White The sensor has 10 metre integral cable Cable jacket diameter Nominal 3.5 mm (0.138 in) Cable minimum bend 30.5 mm (1.2 in) and supplied complete with grease fitting Mounting thread 1/8-27 NPFT and a specially designed adapter to allow Compression fitting seal 4 mm (0.157 in), brass olive adjustable probes depth. Connections Normal greasing procedures can still be Simplex PT-1000 1 – white = Common/Ground followed. 2 – red = Analog channel 3 – red = Analog channel (twist 2 and 3)
red/red white Features
• Compact, low construction to fit in tight spaces. • 1/8-27 NPTF thread for retro-fitting to existing lubrication points. • Industrial grade DIN EN 60751, Class B sensor element. • Cable resistant to oils, acids and solvents. • Adjustable sensor probe depth. • Provides direct connection to IMx- 16/16Plus – no intermediate transmitter device required. 2 SW17
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy Lubrication temperature sensor, 10 m of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. integral cable, 1/8-27 NTF thread PUB CM/P8 18971 EN · September 2020 Certain image(s) used under license from Shutterstock.com.