Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

The Unparalleled: Advantage of Rts

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

THE UNPARALLELED

ADVANTAGE OF RTS

The Robertson Building Systems™ team is pleased to offer you a high-performance solution that provides
superior energy efficiency and a finished interior appearance for your projects. Accommodating up to
12 inches of uncompressed insulation, RTS provides an effective thermal barrier for energy efficient roof
and wall systems. Intended for both new and retrofit construction, cost-effective RTS is easily customized
to provide the level of energy efficiency required for your building.

INNOVATIVE FEATURES EXCEPTIONAL BENEFITS


RTS consists of an exterior panel and a liner The interior liner panel in the RTS system
panel, separated by thermal spacers. Various serves as a vapor barrier to protect insulation
thicknesses of metal building insulation can and attaches to the top of purlins to act as
be accommodated between the two panels a working platform for ease of installation.
with minimum through-metal contact. Heat
loss is decreased through the envelope Well-insulated roofs increase the energy

compared to traditional metal building efficiency of a building while simultaneously

insulation systems so that smaller heating reducing noise transmission. On the inside

and cooling units that consume less energy of the building, the liner panel protects

may be used, reducing initial and building insulation and provides an attractive,

operating costs. durable, and clean interior.


THE MOST EFFICIENT WAY TO ADD MORE
R-VALUE TO YOUR BUILDING
You’ll find that RTS enables you to increase the energy efficiency in your building in a quick and easy way.
Well-insulated buildings are energy efficient, resulting in lower operating costs. When re-roofing or retro
fitting with RTS, shut down of your business is not required so regular business operations will not be
interrupted during the upgrade.

CONCEALED UNCOMPRESSED EXTERIOR


CLIP INSULATION ROOF PANELS
RTS DESIGN FEATURES
◆ 
Accommodates up to R-43 (R-13 + R-30) GUTTER

fiberglass insulation and has a tested


U-factor of 0.0321 BTU/hr-ft-F
(0.185 W/m2-K)
ROOF
◆ RTS clip designed for minimal PURLIN
ROOF
through-metal contact LINER
PANEL
◆ RTS clips in 4-, 6-, 8-, 10-, and 12-inch INSULATION

heights allow selection of desired energy EAVE STRUT

efficiency levels
◆ Standing seam and through-fastened panel EXTERIOR
WALL
WALL PANELS
roof systems available LINER
PANEL

STRAIGHTFORWARD SOLUTION
◆ Simple construction details enable fast
installation WALL
GIRT
◆ Insulation can help reduce noise FOOTING
transmission
◆ Interior liner attached to the top of purlins
acts as a working platform for ease of
installation
BASE PLATE
◆  iner panel on inside of building protects
L
insulation and provides an attractive,
durable, clean interior

COST-SAVING SYSTEM
◆  ell-insulated buildings consume less
W
energy, reducing operating costs
ROBERTSONBUILDINGS.COM | 800-387-5335
◆  teel liner panel acts as a diaphragm to
S
INFO@ROBERTSONBUILDINGS.COM
reduce the need for structural bracing,
reducing costs Descriptions and specifications contained herein were in effect at the time this publication
was approved for printing. In a continuing effort to refine and improve products, Robertson
◆ Shut-down of your business is not required Building Systems reserves the right to discontinue products at any time or change
specifications and/or designs without incurring obligation. To ensure you have the latest
when re-roofing with RTS, allowing your information available, please inquire or visit our website at robertsonbuildings.com.

business to operate without interruption © 2023 Robertson Building Systems, part of Cornerstone Building Brands, Inc. ALL RIGHTS RESERVED.

during the upgrade. 0605239991101/RevB/MS/0923

You might also like