Datasheet

ETA 1180 Circuit Breakers and Bases

ETA 1180 Circuit Breakers

The Weidmuller thermal circuit breaker type 1180 reduces
stoppages and downtime. In combination with a modular
style terminal block the circuit breaker offers individual
protection for every circuit.
• Push button resettable
• All standard amperages available from 0.1 A to 10.0 A
• cRUus (UL 1077) and CSA (C22.2 No. 235)

Terminal Block (Bases)

•  crew type or tension (spring) type terminal options
S
• Circuit breaker status indication available with LEDs
• New base design with built-in molded end plate
• Only 6mm wide
• 12 V and 24 V LED versions
• cRUus, CE, RoHS

Weidmuller, Mexico
Blvd. Hermanos Serdán 698,
Col. San Rafael Oriente Weidmuller, Canada Weidmuller, United States
Puebla, Puebla, Mexico 10 Spy Court 821 Southlake Blvd.
C.P. 72029 Markham, Ontario L3R 5H6 Richmond, Virginia 23236
Telephone: 01 222 2686267 Telephone: (800) 268-4080 Telephone: (800) 849-9343
Facsimile: 01 222 2686219 Facsimile: (905) 475-2798 Facsimile: (804) 379-2593
Email: clientes@weidmuller.com.mx Email: info1@weidmuller.ca Email: info@weidmuller.com
Website: www.weidmuller.com.mx Website: www.weidmuller.ca Website: www.weidmuller.com
ETA 1180 Circuit Breakers and Bases

Thermal Overcurrent Circuit Breaker

Technical Data
General Data
Voltage rating AC 250 V; DC 65 V UL, UL Canada: AC 250 V; DC 72 V
Current ratings 0.1...10 A
6,000 operations at 1 x IN (low-inductance) 3,000 operations at 1 x IN (inductive)
Typical life
500 operations at 2 x IN (inductive)
Ambient temperature -20... +60°C (T 60) -4... +140°F
rated impulse withstand voltage 2.5 kV reinforced insulation in operating area
Insulation co-ordination (IEC 60664 and 60664 A)
pollution degree 2
test voltage operating area AC 3,000V installation area AC 1,500 V
Dielectric strength (IEC 60664 and 60664A)
Insulation resistance > 100 MΩ (DC 500V)
0.1… 5 A 6 x IN AC 250 V DC 65 V
6… 10 A 8 x IN AC 250 V DC 65 V
Interrupting capacity Icn 0.1… 0.7 A 25 x IN DC 30 V
0.8… 6 A 10 x IN DC 30 V
7… 10 A 20 x IN DC 30 V
Interrupting capacity (UL 1077) AC 250 V 2,000 A DC 72 V 2,000 A
Degree of protection (IEC 60529 / DIN 40050) operating area IP40 terminal area IP00
Vibration without terminal block 5 g (57-500 Hz) ± 0.38mm (10-57 Hz) to IEC 60068-2-6, test Fc, 10 freq. cycles/axis & to EN 50155
Shock without terminal block 25 g (11 ms) to IEC 60068-2-27, test Ea
Corrosion 96 hours at 5% salt mist to IEC 60068-2-11, test Ka
Humidity 240 hours at 95% RH to IEC 60068-2-78, test Cab
Mass approx. 15 g
Approvals
Authority Standard Rated voltage
AC 250 V
VDE IEC/EN 60934
DC 65 V
UL 1077 AC 250 V
UL file E67320
C22.2 No 235 DC 72 V
AC 250 V
CSA file 165971 C22.2 No 235
DC 72 V
Note

Ordering Data
Description Part No. Description Part No. Description Part No.
ETA 1180 01 0.10A 1278840000 ETA 1180 01 0.70A 1278930000 ETA 1180 01 3.50A 1279010000
ETA 1180 01 0.20A 1278850000 ETA 1180 01 0.80A 1278940000 ETA 1180 01 4.00A 1279020000
ETA 1180 01 0.25A 1278860000 ETA 1180 01 1.00A 1278950000 ETA 1180 01 5.00A 1279030000
ETA 1180 01 0.30A 1278870000 ETA 1180 01 1.50A 1278960000 ETA 1180 01 6.00A 1279040000
ETA 1180 01 0.40A 1278880000 ETA 1180 01 2.00A 1278970000 ETA 1180 01 7.00A 1279050000
ETA 1180 01 0.50A 1278910000 ETA 1180 01 2.50A 1278980000 ETA 1180 01 8.00A 1279060000
ETA 1180 01 0.60A 1278920000 ETA 1180 01 3.00A 1278990000 ETA 1180 01 10.0A 1279070000
Note

2
 ETA 1180 Circuit Breakers and Bases

Dimensions Typical time/current characteristics at +23°C +73.4°F

The time/current characteristic curve depends on the ambient temperature

prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker
current ratings by the derating factor shown below.
Ambient °F -22 -4 +14 +32 +73.4 +104 +122 +140
temperature
°C -20 -10 0 +23 +40 +50 +60 +60
Derating factor 0.8 0.76 0.84 0.92 1 1.08 1.16 1.24

Standard current ratings and

typical internal resistance values
Current rating Internal resistance Current rating Internal resistance
(A) (Ω) (A) (Ω)
0.1 81 2 0.25
0.2 22 2.5 0.18
0.25 14 3 0.11
0.3 8.7 3.5 0.08
0.4 5.5 4 0.07
0.5 3.4 5 ≤ 0.05
0.6 2.5 6 ≤ 0.05
0.7 1.7 7 ≤ 0.05
0.8 1.5 8 ≤ 0.05
1 0.9 10 ≤ 0.05
1.5 0.4

3
ETA 1180 Circuit Breakers and Bases

Screw clamp terminal block Tension clamp terminal block

Flat-type fuse holder terminal block Flat-type fuse holder terminal block

Technical Data
General Data
Dimensions W–L–H mm (in.) 6 – 57.8 – 39 (0.24 – 2.21 – 1.34) 6 – 57.8 – 39 (0.24 – 2.21 – 1.34)
Weight / Piece 11 g 11 g
Color Black Black
Technical Data
Mounting type (EN 60715) DIN 35mm DIN 35mm
Maximum load current 10 A 10 A
Self-extinguishing degree acc. to UL94 UL94-V0 UL94-V0
Pollution degree 2 2
Surge voltage category (IEC 60664) 2.5 kV 2.5 kV
Insulating material group >100 MΩ >100 MΩ
Nominal Voltage (UL) 250VAC / 72VDC 250VAC / 72VDC
Nominal Current 0.1 A to 10 A 0.1 A to 10 A
Connection Data
Conductor cross-section solid min/max 0.50 / 4mm2 0.50 / 4mm2
Conductor cross-section stranded min/max 0.50 / 4mm2 0.50 / 4mm2
AWG min/max 24-10AWG 24-10AWG (STR) / 24-12AWG (SOL)
Max conductor cross-section stranded with
4mm2 / L=12mm 4mm2 / L=12mm
ferrule with plastic sleeve DIN 46228/4
Stripping length 8.2mm, max 9mm 8.2mm, max 9mm
Screw M3 n/a
Tightening torque 0.8 N∙m
Approvals cRUus, CE, CSA, RoHS cRUus, CE, CSA, RoHS
Note

Ordering Data
Description Model Number Type Part No. Model Number Type Part No.
Black Terminal Block with spacer 3mm 10plus-ST-201 Screw 6760007723 10plus-XT-201 Tension 6760007726
Black Terminal Block LED 24VDC with spacer 3mm 10plus-ST-202 Screw 6760007724 10plus-XT-202 Tension 6760007727
Black Terminal Block LED 12VDC with spacer 3mm 10plus-ST-203 Screw 6760007725 10plus-XT-203 Tension 6760007728
12 pole insulated jumper X22223202 6760007729 X22223202 6760007729
Marking tags (white) 120 tags per card WS 12/6 MC 1609900000 WS 12/6 MC 1609900000
Note

57.80

2
39

4
6

1. 1278950000
2. 6760007723
3. 6760007724
4. 1609900000
5. 6760007729

4 Subject to technical changes • 07/19 •XM • LIT1510