345B L

Series II
UHD

Engine
Engine Model
CAT 3176C ATAAC diesel engine
Flywheel Power
239 kW
321 hp
Weights
Operating Weight 50 420 kg
111,180 lb
Long Undercarriage
Drive
Maximum Drawbar Pull
331 kN
74,380 lb
Maximum Travel Speed
4.4 kph
2.7 mph

345B L Series II UHD

Heavy-duty and purpose built for your demolition job.

Booms, Sticks and Working Tools

Undercarriage

Operator Station

Optional retrofit boom nose and

demolition sticks for demolition at
lower heights or normal digging truly
make this a versatile machine for your
job site. Caterpillar demolition tools
are built to optimize the excavator/tool
system. pg. 3

Caterpillar excavator undercarriage is

stable, durable and low maintenance.
Optional heavy-duty hydraulic variable
undercarriage allows usage of heavier
demolition tools. pg. 4

Roomy, quiet, automatically climate

controlled cab has excellent sightlines
to the work tool to help keep operator
fatigue low and production up throughout
the entire shift. pg. 5

Booms, Sticks and Working Tools

Maximum versatility gets the best out of your machine.

Special Stand. Special stand to support

long boom or short retrofit boom when
changing configuration.

Lowering Control Devices. Lowering

control devices are installed on all
boom and stick cylinders.

Demolition Sticks. Purpose built

demolition sticks have additional internal
reinforcements, heavier plates, through
hardened bores and a bottom wear plate
and match the short boom nose.
Two Piece Main Boom. Two piece main
boom with pin-mounted joint between
boom foot and boom nose.

Electronic Warning Device. An electronic

warning device signals the operator
when the main boom gets out of the
recommended working range.
Retrofit Capability. Short two-position
boom nose on boom foot can be mounted
in a straight (demolition) or bent (digging)
position, adding to the machines
extreme versatility.

Work Tools. Choose from a variety of

Caterpillar work tools such as concrete
crushers and pulverizers, steel shears,
demolition grapples, hydraulic hammers,
quick couplers and multi-processors.

Undercarriage
Durable undercarriage absorbs stresses and provides excellent stability.

The L Undercarriage. The L Undercarriage

provides a stable and rugged working
platform for demolition.

Track Guiding Guards. Full length track

guiding guards complete the machines
guarding package.

Optional Hydraulic Adjustable

Undercarriage. The optional hydraulic
adjustable undercarriage increases the
stability by lowering the center of
gravity of the machine, resulting in
the usage of a bigger tool. The non-bolt
joint allows changing from shipping to
working width or reverse in less than
a minute.

Operator Station
Designed for comfort and ease of operation.

Falling Object Guard. Falling object

guard on the top and front is standard.
Crossbars of top guard are angled in
line with sight for enhanced visibility
to the tool.
Hydraulically tilting cab support.
Hydraulically tilting cab support
allows the cab to be tilted back from
0 to 15 degrees to further improve
upward visibility. This optional equipment
allows the operator to adopt a more
comfortable body position. The tiltable
cab support platform, which is operated
via a key switch, is a 30 cm (12") high
insert between skirt and cab. It also
moves the cab 20 cm (8") forward
to create the space for a tilt angle of
15 degrees.

Ergonomic Control Placement.

This operator work station is quiet
with ergonomic control placement and
convenient adjustments, low lever and
pedal effort, ergonomic seat design and
highly efficient ventilation. The result
is a cab that puts the operator firmly
and comfortably in control to enhance
productivity.

High Visibility Cab. High visibility cab

with the front window made out of
laminated safety glass. For enhanced
upward visibility, the top window
extends completely to the front.
The front window is one-piece and flat
with top and bottom mounted wipers.
The upper left side door window can
slide open. The lower window provides
visibility to the tracks and to the ground
next to the machine. The rear window
offers a good view behind and to the
left, aided by a lower hood profile.

Standards

Engine
Engine Model
Flywheel Power
ISO 9249
SAE J1349
EEC 80/1269
Bore
Stroke
Displacement

CAT 3176C ATAAC diesel engine

239 kW
321 hp
239 kW
321 hp
239 kW
321 hp
239 kW
321 hp
125 mm
4.92 in
140 mm
5.51 in
10.3 L
630 in3

Brakes
Cab/FOGS

Hydraulic System

no engine derating needed up to 2300 m (7,500 ft)

Main Implement System Maximum Flow (2x)

Maximum Pressure Implements (Full Time)
Maximum Pressure - Travel
Maximum Pressure - Swing
Pilot System - Maximum flow
Pilot System Maximum Pressure
Boom Cylinder - Bore
Boom Cylinder - Stroke
Stick Cylinder - Bore
Stick Cylinder - Stroke

Weights

Drive

Ratings at 2000 rpm

based on standard air conditions of 25 C (77 F) and 99 kPa
(29.32 in Hg) dry barometer
used 35 API gravity fuel having an LHV of 42 780 kJ/kg
(18,390 Btu/lb) when used at 30 C (86 F) [ref. a fuel density
of 838.9 g/L (7.001 lb/U.S. gal)]
net power advertised is the power available at the flywheel
when the engine is equipped with fan, air cleaner, muffler
and alternator

Operating Weight Long Undercarriage

50 420 kg

111,180 lb

Service Refill Capacities

Fuel Tank Capacity
Cooling System
Engine Oil
Swing Drive
Final Drive (each)
Hydraulic System
(including tank)
Hydraulic Tank

Maximum Drawbar Pull

Maximum Travel Speed

360 L/min

95.1 gal/min

34 340 kPa

4,980 psi

34 340 kPa
28 440 kPa
41 L/min
4655 kPa

4,980 psi
4,130 psi
10.8 gal/min
675 psi

170 mm
1550 mm
190 mm
1758 mm

6.7 in
61 in
7.5 in
69.2 in

331 kN
4.4 kph

74,380 lb
2.7 mph

8.6 RPM
149 kNm

110,260 lbft

600 mm

24 in

Swing Mechanism
720 L
45 L
30 L
11 L
15 L
520 L

190 gal
12 gal
7.9 gal
2.9 gal
4 gal
137 gal

210 L

55 gal

Sound Performance
Performance

SAE J1026, ISO10265

SAE J1356, ISO 10262

ANSI/SAE J1166

345B L Series II UHD specifications

Swing Speed
Swing Torque

Track
Standard w/Long Undercarriage Triple Grouser

Dimensions
All dimensions are approximate.

5
6
4
345B
17.73 m (58'2")
3.4 m (11'2")

1 Overall length
2 Boom height
3 Cab height*
with Falling Object Guard
without Falling Object Guard
4 Overall width
5 Track shoe width
6 Track gauge
Fully retracted
Fully extended
Weight**

3.67 m (12'0")
3.48 m (11'5")
3.49 m (11'5")
0.60 m (2'0")
2.39 m (7'10")
2.89 m (9'6")
51 830 kg (114,280 lb)

* Cab height must be increased by 0.3 m when equipped with hydraulically tiltable cab.
**If equipped with super-long demolition front part, B linkage, High Visibility Eurocab, falling object guard, heavy duty long undercarriage,
triple grouser track shoes and without tool.

With Hydraulic Wide Undercarriage

4 Overall Width
Fully retracted
Fully extended
5 Track shoe width
6 Track gauge
Fully retracted
Fully extended
Weight*

345B
3.00 m (9'10")
3.60 m (11'10")
0.60 m (2'0")
2.40 m (7'10")
3.00 m (9'10")
57 830 kg (127,520 lb)

* If equipped with ultra-high demolition front part, corresponding linkage, High Visibility Eurocab falling object guard, triple grouser track shoes,
heavy duty long hydraulic wide undercarriage, and without tool.
For information on specifications for configurations other than those included in the above charts, consult your Caterpillar dealer.

345B L Series II UHD specifications

Dimensions and Weights Straight and Bent Position

All dimensions and weights are approximate.

10

9
8
7

345B L Series II UHD specifications

11

1 Boom Height
Straight Position
stick
stick
Bent Position
stick
stick
2 Overall Length
Straight Position
stick
stick
Bent Position
stick
stick
3 Overall width 600 mm shoes
4 Track length
5 Length to centers of rollers
6 Tail swing radius
7 Ground clearance
8 Body height
9 Cab height
with Falling Object Guard
without Falling Object Guard
10 Body width
11 Track gauge
Weight*
With Hydraulic Wide Undercarriage (if equipped)
3 Overall width 600 mm shoes
Shipping width
Working width
11 Track gauge
Fully retracted
Fully extended
Weight**

345B L
R3.4T
R4.0T

3.78 m (12'5")
3.99 m (13'1")

R3.4T
R4.0T

4.21 m (13'10")
4.06 m (13'4")

R3.4T
R4.0T

12.45 m (40'10")
12.41 m (40'8")

R3.4T
R4.0T

11.73 m (38'6")
11.68 m (38'4")
2.99 m (9'10")
5.37 m (17'7")
4.34 m (14'3")
3.65 m (12'0")
0.71 m (2'4")
2.53 m (8'4")
3.67 m (12'0")
3.48 m (11'5")
2.99 m (9'10")
2.39 m (7'10") to 2.89 m (9'6")
50 420 kg (111,180 lb)
345B L
3.00 m (9'10")
3.60 m (11'10")
2.40 m (7'10")
3.00 m (9'10")
56 420 kg (126,400 lb)

* If equipped with retrofit-straight boom front part, linkage, High Visibility Eurocab, falling object guard, heavy duty long undercarriage,
600 mm (24") triple grouser track shoes, stick and bucket [2.0 m3 (2.6 yd3) on 345B].
**If equipped with retrofit-bent boom front part, High Visibility Eurocab, falling object guard, linkage, 600 mm (24") triple grouser track shoes,
stick, heavy duty long hydraulic wide undercarriage, bucket: [2.0 m3 (2.6 yd3) on 345B].
For information on specifications for configurations other than those included in the above charts, consult your Caterpillar dealer.

345B L Series II UHD specifications

Working Ranges
ft

m
25

80

70
20
60

50 15
1
40
3
10
30

20
5
10

0
2
345B

1 Maximum allowable angle from vertical

2 Maximum allowable horizontal reach
3 Maximum vertical pin height

25
16.1 m (52'10")
25.6 m (84'0")

Maximum tool weight*

with L undercarriage
with hydraulic wide
gauge undercarriage

Over Front
3000 kg (6600 lb)
3000 kg (6600 lb)

Over Side
2000 kg (4400 lb)
2700 kg (5950 lb)

* Design of the mounting bracket is critical. Weight includes mounting bracket and Quick Coupler
(if any).

10

345B L Series II UHD specifications

345B L Working Ranges Straight Position

ft

m
14

45

Stick Length

13
12

40

1 Maximum Digging Depth

11

35

10
30

2 Maximum Reach at Ground Level

8
25
7

3
20

3 Maximum Cutting Height

6
5

15

4 Maximum Loading Height

10
5

5 Minimum Loading Height

1
0

R4.0
4.0 m
(13'1")
6.51 m
(21'4")
13.23 m
(43'5")
14.79 m
(48'6")
11.48 m
(37'8")
4.1 m
(13'5")

R3.4
3.4 m
(11'2")
5.86 m
(19'3")
12.64 m
(41'6")
14.27 m
(46'10")
10.53 m
(34'6")
4.74 m
(15'6")

R4.0
4.0 m
(13'1")
8.07 m
(26')
12.20 m
(40')
11.24 m
(36'10")
7.75 m
(25'5")
2.33 m
(7'8")

R3.4
3.4 m
(11'2")
7.42 m
(24'4")
11.60 m
(38'1")
10.97 m
(36')
7.51 m
(24'8")
2.98 m
(9'9")

1
5

10
15

3400 mm (11'2")

4000 mm (13'1")

5
20

6
13
45

12

11

40

10
35

30

20

25

10

15

1
5

m
ft

345B L Working Ranges Bent Position

ft

40

12

35

Stick Length

11
10

30
25

1 Maximum Digging Depth

9
8
7

20

3
15

2 Maximum Reach at Ground Level

6
5

3 Maximum Cutting Height

4
10
5

3
2

4 Maximum Loading Height

1
0

5 Minimum Loading Height

1
5

10
15

3400 mm (11'2")

4000 mm (13'1")

5
20

6
7

25

8
12
40

11

10
35

9
30

7
25

6
20

4
15

3
10

1
5

0
0

m
ft

345B L Series II UHD specifications

11

345B L Lift Capacities Straight Position

4.0 m (13'2") stick (150-4711) with bucket (136-6242)

Load Radius
Over Front

Load at
Maximum Reach

Load Point
Height

Load Radius
Over Side

4.5 m/15.0 ft

6.0 m/20.0 ft

7.5 m/25.0 ft

9.0 m/30.0 ft

10.5 m/35.0 ft

*8300
*19,700
*10 200
*23,700
*12 800
28,500
11 600
25,000
10 200
22,000
9400
20,200
9100
19,500
*8100
19,500
*4900
*12,200

6900
14,500
6900
14,600
6600
14,100
6200
13,200
5700
12,100
5200
11,200
4900
10,400
4600
9900
4600
9900
*2200

*5500

4500

*6500
*15,600
*6500
*15,600
*6400
*15,400
*6100
*14,700
*5600
*13,400
*4500
*10,800
*2500

4500
9500
4300
9100
4100
8600
3800
8100
3600
7600
3500
7500
*2500

*4800
*4800
*11,700 *11,700
*4300
*4300
*10,400 *10,400
*4000
*4000
*9800
9400
*3900
3500
*9600
7800
*4000
3100
*9600
6900
*4100
2900
*9900
6300
*4300
2800
*10,500
6100
*3800
2800
*9700
6200
*3100
3100
*8000
6700
*2100
*2100
*5600
*5600

* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on
SAE J/ISO 10567 standard. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.

345B L Lift Capacities Straight Position

3.4 m (11'2") stick (150-5994) with bucket (136-6242)

Load Radius
Over Front

Load at
Maximum Reach

Load Point
Height

Load Radius
Over Side

6.0 m/20.0 ft

7.5 m/25.0 ft

9.0 m/30.0 ft

10.5 m/35.0 ft

*7300

*8600
*8600
*5800
*18,800 *18,800
*8700
*8700
*7000
*18,900 *18,900 *15,200
*8900
8400
*7000
*19,300 18,100 *15,300
*9000
7500
*7000
*19,600 16,200 *15,300
*8900
6600
*6900
*19,500 14,200 *15,000
*8500
5800
*6500
*18,600 12,400 *14,100
*7700
5300
*5800
*16,700 11,300 *12,500
*6200
5100
*4600
*13,600 10,800
*9800
*4100
*4100
*2600
*8800
*8800
*5200

5600
5800
12,200
5500
*5500
11,700
5100
*5400
10,800 *11,700
4500
*5200
9700 *11,300
4100
*4800
8700 *10,200
3700
*4000
8000
*8300
3600
*2400
7700
*2600
*5200

*7300

*10 100
*22,200
*9900
*22,100
*10 500
*23,200
*11 500
*25,000
11 400
24,700
9600
20,800
8300
17,900
7600
16,400
7500
16,000
*5100
*11,000

*8100
*8100
*18,100 *18,100
*4500
*4500
*10,100 *10,100

*10 100
*22,200
*9900
*22,100
*10 500
*23,200
*11 500
*25,000
*11 900
*25,900
*11 900
*26,000
*11 200
*24,600
*9800
*21,600
*7800
*17,100
*5100
*11,000

*15 200 *15 200

*31,500 *31,500

kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb

10.5 m
35.0 ft
9.0 m
30.0 ft
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
0.0 m
0.0 ft
1.5 m
5.0 ft
3.0 m
10.0 ft

4.5 m/15.0 ft

3400
3300
6900
3000
6400
2800
5900
2700
5600
*2400

*6100
*6100
*13,700 *13,700
*5300
*5300
*11,900 *11,900
*5000
4100
*11,100
9200
*4800
3200
*10,800
7200
*4800
2700
*10,700
6000
*4200
2400
*9500
5300
*3700
2300
*8200
5000
*3000
2300
*6700
5200
*2100
*2100
*4700
*4700
*900
*900
*1900
*1900

* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on
SAE J/ISO 10567 standard. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.

12

345B L Series II UHD specifications

*7900
*7900
*18,000 *18,000
*8400
*8400
*7400
*19,900 *19,900 *16,400
*8900
*8900
*7700
*21,000 *21,000 *18,400
*9600
*9600
*7800
*22,600 20,700 *18,700
*9900
8900
*8000
*23,500 19,000 *19,000
*10 100
8000
*8000
*24,100 17,200 *19,200
*10 000
7200
*7800
*24,000 15,500 *18,800
*9500
6600
*7300
*22,700 14,300 *17,700
*8300
6300
*6400
*20,100 13,600 *15,500
*6500
6300
*4800
*15,900 13,500 *11,700
*3900
*3900
*2200
*9500
*9500

*9200
*23,300
*12 700
*31,000
*9100
*22,600

*8300
*19,700
*10 200
*23,700
*12 800
*30,200
*13 300
*31,600
*13 200
*31,400
*12 200
*29,400
*10 500
*25,600
*8100
*19,900
*4900
*12,200

*9400
*21,700
*17 900
*41,800

kg
lb
kg
lb
kg
lb
kg
*9400
lb
*21,700
kg
*17 900
lb
*41,800
kg
lb
kg
lb
kg
*9200
lb
*23,300
kg
*6200
*6200 *12 700
lb *15,300 *15,300 *31,000
kg
*9100
lb
*22,600
kg
lb

10.5 m
35.0 ft
9.0 m
30.0 ft
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
0.0 m
0.0 ft
1.5 m
5.0 ft
3.0 m
10.0 ft
4.5 m
15.0 ft

3.0 m/10.0 ft

m
ft
7.68
24.58
9.05
29.32
10.00
32.61
10.66
34.87
11.08
36.30
11.28
36.99
11.27
36.98
11.06
36.28
10.63
34.85
9.95
32.57

m
ft
8.60
27.67
9.84
31.95
10.72
34.99
11.34
37.10
11.73
38.44
11.92
39.09
11.91
39.09
11.71
38.43
11.31
37.08
10.68
34.95

345B L Lift Capacities Bent Position

4.0 m (13'2") stick (150-4711) with bucket (136-6242)

Load Radius
Over Front

Load at
Maximum Reach

Load Point
Height

Load Radius
Over Side

3.0 m/10.0 ft

4.5 m/15.0 ft

6.0 m/20.0 ft

7.5 m/25.0 ft

9.0 m/30.0 ft

10.5 m/35.0 ft

*7900
*7900
*17,200 *17,200
*8700
*8700
*18,900 18,800
*9400
8000
*20,400 17,100
*9800
7300
*21,300 15,600
*9800
6900
*21,300 14,700
*9200
6700
*20,000 14,400
*7800
6800
*16,600 14,700

*15 600 *15 600 *11 100 *11 100

*24,100 *24,100
*17 600 *17 600 *12 300 11 500
*38,300 38,200 *26,700 24,600
*18 200 16 100 *12 900 10 400
*39,800 34,700 *28,100 22,300
*17 700 15 500 *12 900
9800
*38,700 33,300 *28,000 21,000
*16 300 15 500 *12 100
9600
*35,500 33,200 *26,300 20,600
*13 800 *13 800 *10 400
9800
*29,900 *29,900 *22,500 21,000
*9700
*9700
*7100
*7100
*20,500 *20,500 *14,900 *14,900

*8300
*18,900
*12 700
*28,800
*18 100
*40,900
*18 700
*40,600

*8300
*18,900
*12 700
*28,800
*18 100
*40,900
*18 700
*40,600

kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
*9000
*9000
lb *20,200 *20,200
kg *13 600 *13 600
lb *30,500 *30,500
kg
lb
kg
lb

9.0 m
30.0 ft
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
0.0 m
0.0 ft
1.5 m
5.0 ft
3.0 m
10.0 ft
4.5 m
15.0 ft
6.0 m
20.0 ft

1.5 m/5.0 ft

*6200
*6200
*12,200 *12,200
*6400
*6400
*14,000 *14,000
*6700
6600
*5200
*14,800 14,100
*7200
6200
*6100
*15,700 13,200 *12,800
*7600
5700
*6300
*16,500 12,100 *13,600
*7800
5300
*6200
*16,900 11,300
*7600
5000
*16,600 10,700
*7000
4900
*14,900 10,600

4500
4300
9100
4100
8600
3900

*4100
*4100
*9300
*9300
*4000
*4000
*8800
*8800
*4000
*4000
*8800
*8800
*4100
*4100
*9100
*9100
*4400
3900
*9700
8700
*4800
3700
*10,700
8200
*5500
3700
*12,100
8200
*6200
4000
*13,700
8800
*6200
4500
*13,800 10,000
*6100
5700
*13,500 12,700
*5400
*5400
*11,800 *11,800

m
ft
8.53
27.60
9.54
31.08
10.23
33.45
10.66
34.93
10.87
35.65
10.86
35.64
10.64
34.92
10.20
33.42
9.49
31.04
8.46
27.55
6.95
22.41

* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on
SAE J/ISO 10567 standard. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.

345B L Lift Capacities Bent Position

3.4 m (11'2") stick (150-5994) with bucket (136-6242)

Load Radius
Over Front

Load at
Maximum Reach

Load Point
Height

Load Radius
Over Side

4.5 m/15.0 ft

6.0 m/20.0 ft

7.5 m/25.0 ft

9.0 m/30.0 ft

*7300

*7500
*7500
*14,300 *14,300
*7900
*7900
*6800
*14,900 *14,900 *12,900
*8500
*8500
*7000
*16,100 *16,100 *13,400
*9100
*9100
*7400
*17,300 16,000 *14,000
*9600
8800
*7600
*18,300 14,200 *14,400
*9800
8000
*7600
*18,700 12,800 *14,500
*9600
7500
*7200
*18,100 12,100 *13,600
*8600
7500
*16,100 12,100
*6200
*6200

*15 400
*30,500
*20 000
*38,100
*14 800
*27,900

*10 700
*20,300
*11 900
*22,600
*12 800
20,700
11 600
18,600
11 000
17,700
11 000
17,700
*9000
*16,800

*15 400
*30,500
*20 000
*38,100
*14 800
*27,900

*7300

*14 800 *14 800 *10 700

*20,300
*17 300 *17 300 *11 900
*32,600 *32,600 *22,600
*18 600 *18 600 *12 800
*35,200 31,900 *24,300
*18 500 18 200 *13 100
*35,100 29,400 *24,900
*17 300 *17 300 *12 700
*32,900 28,800 *24,100
*15 200 *15 200 *11 400
*28,900 *28,900 *21,700
*11 800 *11 800
*9000
*22,300 *22,300 *16,800

kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb

9.0 m
30.0 ft
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
0.0 m
0.0 ft
1.5 m
5.0 ft
3.0 m
10.0 ft
4.5 m
15.0 ft

3.0 m/10.0 ft

*6800
12,500
*7000
11,800
6700
10,800
6100
9800
5600
9000
5400
8600

*5900
*11,500
*5600
*10,800
*5600
*10,800
*5800
*11,100
*6200
*11,900
*6300
*12,300
*6400
*12,400
*6400
*12,500
*6300
*12,300
*5800
*11,300

*5900
*11,500
*5600
*10,800
*5600
*10,800
5400
9000
4700
7900
4400
7300
4400
7300
4800
8000
5800
9600
*5800
*11,300

m
ft
7.73
24.93
8.83
28.74
9.57
31.29
10.04
32.87
10.25
33.63
10.25
33.63
10.01
32.86
9.54
31.26
8.78
28.70
7.65
24.87

* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on
SAE J/ISO 10567 standard. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.

345B L Series II UHD specifications

13

Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for specifics.

Air precleaner
Alternator, 52-amp
Automatic engine speed control
Automatic swing parking brake
Auxiliary outlet port on tank with screen
Bucket linkage
C family
Engine:
Caterpillar 3176C ATAAC diesel engine with 24-volt
electric starting and air intake heater
High visibility cab
Air conditioner with automatic climate control
Ashtray with cigar lighter
Coat hook
Drink holder
Floor mat
Heater and defroster
Horn
Instrument panel with gauges
Gauges and indicator lights for fuel level, coolant
temperature and hydraulic oil temperature
Light, interior
Literature compartment
Lowering control devices
Low fuel indicator light
Joysticks, adjustable pilot-operated
Prewired radio mounting
Positive filtered ventilation
Seat belt, retractable
Seat, suspension, fully adjustable
Stationary skylight
Storage compartment suitable for a lunch box cooler
Travel control pedals
Two-speed auto shift travel
Windshield wiper and washer

14

345B L Series II UHD specifications

Combined auxiliary hydraulic circuit

Counterweight
Door locks and caps locks with Caterpillar one-key
security system
Falling object guard, top and front
Fine swing control
Full length track guiding guards
Fully pressurized hydraulic system
Heavy-duty bottom guards
Heavy-duty underhouse
High ambient cooling
Hydraulic neutralizer lever for all controls
Lights, working
Frame mounted, one
Boom, both sides
Cab mounted, two
Mirrors, frame and cab
Muffler
Pre-start monitoring system
Polycarbonate and glass windows
Power Mode Selector
Power Train
Return filter clogging alarm
Water separator
Work Mode Selector
Undercarriage
Hydraulic track adjusters
Track-type sealed undercarriage
600 mm (24") triple-grouser shoes

Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for specifics.

Hydraulically tilting cab support

Refueling pump
Starting aid, cold weather
Starting aid, ether
Straight travel third pedal option
Sun screen

Track:
600 mm (24") heavy-duty double-grouser shoes
Undercarriage
Hydraulic wide gauge

345B L Series II UHD specifications

15

345B L Series II UHD

For more complete information on Cat products, dealer services, and industry solutions, visit us
on the web at www.CAT.com
2002 Caterpillar
Printed in U.S.A.

AEHQ5476 (2-02)

Materials and specifications are subject to change without notice.

Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.