PRO SPECIFICATIONS

NOTE: Applies to all pumps:

DESCRIPTION 60 DESCRIPTION 125
Min. pneumatic air pressure 86 PSI
Motor Rating 60hp (45kw) Motor Rating 125hp (93.2kw) Max. pneumatic air flow rate 1 SCFM
Pressure Range (Deadhead) 90,000psi (6.200 bar) Pressure Range (Deadhead) 90,000psi (6.200 bar) Ambient temp. @ Oil-to-Water cooling circuit 41 - 106 °F
Max. Flow Rate at Max. Pressure (60 Hz) 0.78 gal/min (2.9 lpm) Max. Flow Rate at Max. Pressure (60 Hz) 1.59 gal/min (6.0 lpm) Ambient temp. @ Oil-to-Air cooling circuit 41 - 86 °F

Length 83.7” (2,126 mm) Length 88” (2,230 mm)

Width 53.7” (1,364 mm) Width 59.09” (1,500 mm)
Height 59.3” (1,506 mm) Height
MAX. ORIFICE SIZE:
61.12” (1,552 mm)
CUTTING WATER CIRCUIT CUTTING WATER CIRCUIT
Attenuator Volume .42 gal (1.6 L) Attenuator Volume .42 gal (1.6 L) PRO-III 60HP: .011
Cutting Water Inlet Pressure 35-85psi (2.41-5.86 bar) Cutting Water Inlet Pressure 35-85psi (2.41-5.86 bar)
PRO-III 125HP: .016
Min. Cutting Water Inlet Flow 4.0 gal (15.1 L) Min. Cutting Water Inlet Flow 8 gal (30 L)
Low Pressure Filter 10 µm abs. Low Pressure Filter 10 µm abs.
CONTROLS & ELECTRIC CONTROLS & ELECTRIC
Nom. Current at 480V/60Hz (Full Load Amp) 70 A Nom. Current at 480V/60Hz (Full Load Amp) 70 A
HYDRAULICS HYDRAULICS
Hydraulic Tank Capacity 55.8 gal(182
48 gal (211L)L) Hydraulic Tank Capacity 110 gal (416 L)
Oil Level and Temperature Control Sensor Oil Level and Temperature Control Sensor
STANDARD FEATURES STANDARD FEATURES
Adjustable Booster Pump Adjustable Booster Pump
Cutting Water Inlet Shut-Off Valve Cutting Water Inlet Shut-Off Valve
Dual Pressure Setting Dual Pressure Setting
Oil Drip Pan Oil Drip Pan
Dump Valve Dump Valve
Water Cooled Heat Exchanger Water Cooled Heat Exchanger
Cover Cover
Doors Doors
High Pressure Transducer High Pressure Transducer
OPTIONAL FEATURES Proportional Control
Air Cooled Heat Exchanger Soft Start
Motor Rewind for 575v & CSA OPTIONAL FEATURES
Proportional Control Air Cooled Heat Exchanger
Redundant Intensifier Motor Rewind for 575v & CSA
Soft Start/Electronic/Y-Delta Electronic/Y-Delta Start

WATERJET
Genuine Parts & Service SUPRAlife seals guaranteed for 500 hours*
THE WATERJET
WATERJET INDUSTRY
Your business is worth it.
Onsite Post Installation Assessment by
KMT Genuine Service Technician

Standard One Year Warranty with Option for

Extended Warranty

Includes Two Preventive Maintenance Visits

in the First Year of PRO-III Ownership

Be Secure Knowing your PRO-III is Serviced by the

Experts at KMT Genuine Service

Maintaining Optimal Performance, Efficiency and

Reliability Through the Life of your Intensifier

Setting the Standard for Service and Support in the

Waterjet Industry

ers of Waterjet Ten Genuine Service Vans

Network of OEMs Comprehensive PM Program
Range of Pumps
THE BEST VALUE IN THE WATERJET INDUSTRY
Genuine Parts-Exact Specifications
PRO PUMPS BROCHURE - 01/2022

KMT Waterjet Systems Inc.

• WATERJET PIONEERS 635 West 12th Street
Baxter Springs, KS 66713 USA
• GLOBAL NETWORK OF OEM’s 620-856-2151 • 800-826-9274
sales@kmtwaterjet.com
• BROADEST RANGE OF WATERJET SYSTEMS
kmtwaterjet.com
Powering the World in Waterjet
Technology for over 50 Years
KMT STREAMLINE PRO® 90,000PSI PUMP 60,000PSI vs. 90,000PSI Comparison
LECTUA
The diagrams below shows the KMT PRO 90,000PSI (60hp and 125hp) pumps compared to standard 60,000PSI (50hp) waterjet
TE

PATENTE
D L
pumps. The data demonstrates when cutting 1 inch aluminum at 90,000PSI, there is a significant improvement in productivity,
IN

SUPRAlife seals guaranteed for 500 hours (Terms & conditions apply)
lower cost per part and substantial abrasive savings.
LECTUA
TE

D
L

PATENTE
IN

Metal-to-metal seal design is more durable with no wear in the high pressure cylinder bore

Tie Rod Design with hydraulic loading tensioner guarantees longer lifetime of SUPRAlife seals

Stainless steel liner adds extra protection to ceramic plunger for longer life

Topworks can be retrofitted to PRO-I & PRO-II Pumps

(Bushing Retainer Flange)

Maintains Key KMT

Nine Key Features: Long
Technology Stroke and Quick
Advancements Seal Change

KMT PRO ADVANTAGE

Designed for maximum productivity, profitabilty, and extended performance. Combines the lowest cost of operating a
waterjet pump with outstanding KMT Genuine Service support to provide optimum value.

60,000 psi
60,000 psi

90,000 psi

90,000 psi

Patented PRO Technology:

Lowest Cost Per Part!