CALCULATION OF BUILDING STRUCTURE ANALYSIS

PT. NAMASINDO PLAS – GBJ GALON, BANDUNG

Document No. Rev. Contract No. Page No.
1 0

CALCULATION AND ANALYSIS OF BUILDING

SUMMARECON MALL – STEEL BUILDING, SERPONG

Picture 1. Modelling picture in SAP2000

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
2 0

TABLE OF CONTENTS
TABULATION OF REVISED
SHEETS……………………………………………………………………………………………………………………3
1. GENERAL DESCRIPTION...................................................................................................................4

1.1 Scope...........................................................................................................................................4

1.2 Code, Standards, and Refferences.................................................................................................4

1.3 Quality of Material.........................................................................................................................5

1.4 Unit Weight of Material...................................................................................................................5

2. LOADING DESIGN.............................................................................................................................5

2.1 Load Type....................................................................................................................................5

2.1.1 Dead Load (DL)......................................................................................................................5

2.1.2 Live Load (LL)........................................................................................................................5

2.1.3 Wind Load (WL).....................................................................................................................5

2.1.4 Seismic Load (QL)..................................................................................................................5

2.2 Load Calculation...........................................................................................................................6

2.2.1 Dead Load.............................................................................................................................6

2.2.2 Super Dead Load................................................................................................................................6

2.2.3 Live Load...............................................................................................................................6

2.2.4 Wind Load.............................................................................................................................6

2.2.5 Seismic Load.........................................................................................................................7

2.3 Load Combination.......................................................................................................................10

3. STRUCTURAL ANALYSIS AND DESIGN...........................................................................................10

3.1 Structural Properties...................................................................................................................10

3.2 Anaysis Result...........................................................................................................................10

3.2.1 Stress Ratio.........................................................................................................................11

3.2.2.Support Reaction Summary...................................................................................................11

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
3 0

TABULATION OF REVISED SHEETS

REVISIONS REVISIONS
SHEET SHEET
A B C 0 1 2 3 4 A B C 0 1 2 3 4
41
2 42
3 43
4 44
5 45
6 46
7 47
8 48
9 49
10 50
11 51
12 52
13 53
14 54
15 55
16 56
17 57
18 58
19 59
20 60
21 61
22 62
23 63
24 64
25 65
26 66
27 67
28 68
29 69
30 70
31 71
32 72
33 73
34 74
35 75
36 76
37 77
38 78
39 79
40 80
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
4 0

1. GENERAL DESCRIPTION
1.1 Scope
This document presents design calculation of Building Structure will be perform and calculate by SAP 2000
Structure Spesification:
- Length = 54 m
- width = 25 m
- Height = 6 m
- Upper Structure material = steel Structure
- Sub-Structure material = steel Structure

Picture 2. Modelling Steel Material in SAP2000

1.2 Code, Standards, and Refferences

1 SNI 2847: 2013 Persyaratan Beton Struktural Untuk Bangunan
2 SNI 1726: 2019 Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan
Gedung dan non Gedung
3 SNI 1727: 2013 Beban Minimum Untuk Perancangan Bangunan Gedung dan Struktur
Lain
4 PPIUG 1983.
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
5 0

1.3 Quality of Material

No Material Description Value Unit
Fc’ 25 Mpa. Fc’20 Mpa
1 Concrete Kg/cm2
Compressive strength at 28 days 300,250
Deformed reinforcing steel bar
2 Yield strength Kg/cm2
(fy) 4000

3 Plain reinforcing steel bat (fy) Yield strength Kg/cm2

2400
1.4
Unit Weight of Material
No Material Value Unit

1 Steel Structure 7850 kg/m3

2 Structural Concrete 2400 kg/m3
2. LOADING DESIGN
The following loads and forces are considered in the design of steel structurer
2.1 Load Type
2.1.1 Dead Load (DL)
Selfweight of Steel Structure

2.1.2 Super Dead Load (SDL)

2.2.3 Wind Load (WL)

Calculation of wind loads using SNI 1727:2020 using the wind load procedure on buildings:
SPGAU (envelope procedure)
2.2.4 Seismic Load (QL)
The structure is to be designed to resist Seismic Force induced as lateral static equivalent
the lateral seismic force will be calculated base on indonesian code SNI.
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
6 0

2.2 Load Calculation

2.2.1 Dead Load (DL)
Selfweight of Steel Structure

2.2.2 Super Dead Load (SDL)

Gambar. Input Superdead Load

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
7 0

2.2.3 Wind Load

Calculation of wind loads using SNI 1727:2020 using the wind load procedure on buildings: SPGAU
(envelope procedure)

Part 1 applies to all low-rise buildings, wind loadsThe ones acting on the wall need to be separated as
wind coming, wind going, and side the walls of the building obtain the appropriate amount of internal
force for SPGAU structural components.
Part 2 applies to the special class of designed low-rise buildings as a simple closed diaphragm building
as specified in pasal 26.2.

General Requirement SNI 1727:2020

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
8 0

1. Basic Wind Speed

2. Wind Direction Factor

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
9 0

3. Exporsure Category
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
10 0

4. External pressure coefficient (cp)

5. Wind Load X Direction

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
11 0

6. Wind Load Y Direction

2.2.4 Live Load

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
12 0

22.2.5 Seismic Load

Seismic Load is calculated based on SNI 1726-2012 with Static Equivalent Method
Data Seismic :
- Lokasi Bangunan = Bandung
- Kelas Sittus = D (Tanah Sedang)
- Jenis Bangunan = Gudang
- Kategori Resiko = 1 (tabel 3 SNI 1726:2019)
- Faktor Keutamaan = 1 (tabel 4 SNI 1726:2019)
- Ss = 1.1209 (https://rsa.ciptakarya.pu.go.id/2021)
- S1 = 0.4928 (https://rsa.ciptakarya.pu.go.id/2021)
- TL (periode transisi jangka panjang) = 20 detik (https://rsa.ciptakarya.pu.go.id/2021)
- SDS = 0.7859
- SD1 = 0.5937

Table 1 Occupancy Categories

Table 2 Site Geology and Soil Characteristic

Gudang penyimpanan, kategori resiku I

Faktor keutamaan gempa (Ie) 1.0
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
13 0

Table 3 Structural System

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
14 0
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
15 0
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
16 0

Response Spectrum Bandung

Inputting bandung sepctrum response parameters

2.3 Load Combination

 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
17 0
 CALCULATION OF BUILDING STRUCTURE ANALYSIS
PT. NAMASINDO PLAS – GBJ GALON, BANDUNG
Document No. Rev. Contract No. Page No.
18 0

3. STRUCTURAL ANALYSIS AND DESIGN

3.2 Analysis Result
The structure below are calculated by SAP 2000 (computer program for civil structure) and these
are the result for stress ratio. The structure will meet therequirement if the value of stress ratio <
1. From the results of building analysis using the sap 2000 application there are not records or errors
in the structure with solar panel installation. From the conclusion above this building is safe to
install the solar panels according to the installation plan.