Modelo 1
Modelo 1
Modelo 1
Training Directory
Siemens Building Technologies
2 Kenview Boulevard
Brampton, Ontario L6T 5E4
Canada
905-799-9937
www.siemens.com/esonline
A Message to Our Students
Best Regards,
Karen Petersen
Director, Performance Group
Introduction i
Section 01
Building Automation
Introduction Section 01
i A Message to Our Students 06 Building Automation 23 5-790 Accelerated APOGEE with
Welcome to the 2015 BACnet Master Operator Program
07 Training Options
Training Directory! Classroom Training Courses with 24 5-900 Advanced APOGEE for
Karen Petersen, Director Hands-on Labs, Overview Training Master Operators
Performance Group and Self-Study Materials
25 5-920 Desigo CC Workstation
ii Table of Contents 08 Building Automation Operations
iv Training Web-Portal: ES Online Training Team
26 5-925 Desigo CC Advanced
v Office Locations 09 Classroom Training Courses Operations
Training Paths and Discounts
27 Overview Courses
10 5-615 APOGEE Field Panel and On-Site Training
FLN Operations
28 Self-Study Materials
11 5-620 APOGEE Workstation Web-Based and CD Training
Operations Requirements
12 5-625 APOGEE Advanced 29 Interactive Self-Study Training and
Operations CD Training Packages
13 5-630 APOGEE PPCL Programming 30 APOGEE Insight Basics
14 5-635 APOGEE Programming for 30 DCC 100 Introduction to Desigo CC
Efficient Building Operations
31 APOGEE Scheduler 2.0
15 5-652 InfoCenter Suite
32 APOGEE Reports 2.0
16 5-660 Advanced APOGEE Graphics
32 APOGEE Trending 2.0
17 5-670 APOGEE Laboratory Controls
33 Introduction to Terminal Box
18 5-690 Accelerated APOGEE Master TECs 2.0
Operator Program
33 MBC-RBC Interactive
19 5-710 APOGEE with BACnet for Technical Manual
Experienced Insight Users
34 Introduction to the PXC-Modular
20 5-715 BACnet Field Panel and Field Panel and TX-I/O
P1 FLN Operations
35 Introduction to Fume Hood and
21 5-720 APOGEE with BACnet Laboratory Room Controls
Workstation Operations
35 Remote Notification (RENO) 2.0
22 5-725 APOGEE with BACnet
Advanced Operations
ii Introduction
Section 02 Section 03
Fire Safety Security Products
Section 02 Section 03
36 Fire Safety 51 FIS 4505 Cerberus DMS 64 Security Products
37 Training Options Management Station 65 Training Options
Classroom Training Courses and 52 FIS 5512 FS-250 Installation, Classroom Training Courses
Training Software Operation and Maintenance 65 Security Products
38 Fire Systems Training Team 53 FIS 6213 Sinorix Engineering Training Team
39 Classroom Training Courses and Design 66 Classroom Training Courses
39 FIS 1114 MXL Installation, 54 FIS 7114 VESDA System Design 66 5-420 SiPass Access Control
Operation and Maintenance and Maintenance
67 5-425 SiPass Extended Operations
40 FIS 1124 MXL Voice Installation, 55 FIS 9102 Desigo Life Safety
Operation and Maintenance UL 50 PT
56 FIS 9104 Desigo Life Safety 69 Training Enrollment Form
41 FIS 1134 MXL Advanced and
Networking UL 250/500 PT 70 CD Order Form
44 FIS 2124 XLS Voice Installation, 59 FIS 9524 Cerberus PRO UL Voice
Operation and Maintenance 60 Self-Study Materials
45 FIS 2134 XLS Advanced and 60 FIS 100 Fire Detection and
Networking Alarm System Basics
46 FIS 2144 ZEUS XLS 60 FIS 150 MXL and MXLV Fire Panels
Programming Tool and Components
47 FIS 2154 XLS Global 61 FIS 250 XLS and XLSV Fire Panels
Advanced Applications and Components
48 FIS 3113 System 3 Installation, 61 FIS 411 Introduction to Desigo CC
Operation and Maintenance Fire Safety Management
49 FIS 4115 Desigo CC Fire Safety 62 FIS 450 Cerberus DMS Overview
Management Station
62 FIS 900 Desigo Life Safety
50 FIS 4134 NCC - Network UL System Overview
Command Center
63 FIS 950 Cerberus PRO Overview
Introduction iii
Building Automation Systems & Product Training
Following are some of the highlights available Note: Prices in this directory apply
through the training portal: during the period from October 1, 2014
through September 30, 2015, but are
• The current training schedule including how many seats are available
subject to change.
in a specific class
• Request enrollment for a classroom training class For more information about training, call
• Purchase and launch web-based training 1-800-487-7771 or send an email to:
performancegroup.ic@siemens.com.
• Obtain copies of your training certificates
• View your training transcript APOGEE is a registered trademark of
Siemens Building Technologies. Company
You will need an account on ES Online to access the above features. and product names mentioned in this
You can request an account directly on ES Online. If you have not manual are trademarks or registered
attended training in the past, go to www.siemens.com/esonline trademarks of their respective companies.
and click on Register on the top right of the page. Fill in the required BACnet is a registered trademark of
information and the Performance Group will process your request and ASHRAE. © 2014 Siemens Building
follow-up with your account information. Technologies Division. All rights reserved.
If you have attended Siemens Training in the past, contact performancegroup.ic@siemens.com for your username.
iv Introduction
Building Automation Systems & Product Training
Office Locations
United States Canada
Introduction v
01:
Building
Automation
Classroom Training
Overview Courses
Self-Study Materials
Training Options
We offer three types of Building
Automation Training: Classroom Training,
Overview Courses and Self-Study Materials.
6 Building Automation
Training Options
Our classroom training provides objective-based learning and includes hands-on labs to allow students to practice with our
building controls hardware and software. Enrollment is limited so that instructors may give individual attention to each
student. These classes are scheduled at local Siemens offices and can be taught at customers‘ facilities.
See pages 10-26 for course descriptions.
Building Automation 7
» Classroom Training Courses
Jeremy Bell Mike Binkowski Daniel Browne Robert Cline Robbie Culver Ernie Glenn
Ric Greenhoe Bill Harris Jeff Head Roger Herrick Noel Hipolito John Istre
Deven Jackson Pat Kelly Timothy Kline Mike Lasala Robert Laws Tom Macaulay
Jim Rowe Mike Samuel Jim Stephens John Traber Joshua Webb Dan Zedan
8 Building Automation
Classroom Training Courses
Training Paths
Siemens Building Technologies offers the following training paths:
Building Automation 9
Classroom Training Course
“This course
was precisely
what we needed
to expand our
capabilities.”
Richard with Clark County
School District
10 Building Automation
Classroom Training Course
5-620 APOGEE
Workstation Operations (4 days)
Learn to monitor and control your building automation Test-Out:
system using your APOGEE workstation.
For experienced operators, we
offer a web-based tool to test
Topic: You will learn to: your knowledge of the
information taught in this class.
For more details or to launch
Distributed Digital • Define DDC and explain how it is used to
the test-out, please visit:
Control (DDC) control building systems.
www.siemens.com/esonline.
Building Automation 11
Classroom Training Course
5-625 APOGEE
Advanced Operations (4 days)
Learn to use the advanced features of the APOGEE workstation.
12 Building Automation
Classroom Training Course
Prerequisite:
• Describe and use the features of the Program
Program Editor Editor. APOGEE Workstation Operations
• Use various navigational tools in Program Editor. (5-620) or Accelerated APOGEE
Master Operator Program (5-690)
• Use Report Builder to test and troubleshoot or APOGEE with BACnet for
Troubleshooting Experienced Insight Users (5-710)
programs.
or APOGEE with BACnet
• Use conditional and emergency control Workstation Operations (5-720) or
statements. Accelerated APOGEE with BACnet
Point Control • Write a control LOOP to modulate equipment. Master Operator Program (5-790).
• Use a TABLE statement to reset values.
• Use a dead band for cycling equipment on and off. CEUs: Price:
2.7 CEUs $1,995 (U.S.)
FLN Devices • Write PPCL code to command FLN devices.
Building Automation 13
Classroom Training Course
“This course
will help when
working with
the Siemens
Technician
onsite.”
Brian with Parsons
14 Building Automation
Classroom Training Course
InfoCenter Points • Identify the different point types and their properties.
Participants:
Individuals who will administer the data
collected by an APOGEE system using
InfoCenter Suite software.
Course Length:
Three days ending by 4:30 pm
on the third day.
Prerequisite:
It is strongly recommended that participants
take APOGEE Workstation Operations (5-620)
or Accelerated APOGEE Master Operator
Program (5-690) or APOGEE with BACnet for
Experienced Insight Users (5-710) or APOGEE
with BACnet Workstation Operations (5-720) “I like the fact that I can
or Accelerated APOGEE with BACnet Master
Operator Program (5-790) and have some PC actually use information
experience in order to receive maximum
benefit from the training.
that I learned in class on
my own system.”
CEUs: Price:
Michael with Alegent Creighton Health
2.3 CEUs $1,995 (U.S.)
Building Automation 15
NEW! Classroom Training Course
• Create Enhanced Graphics Objects (Pie Charts, Bar Charts, Thermometers, Angular Gauges).
Enhanced Graphic • Add the various Enhanced Graphics Object types to an Insight Graphic.
Options (EGO) • Modify the appearance of an Enhanced Graphic Object.
• Make the Enhanced Graphic Object commandable.
Participants:
Advanced users needing to update or modify existing
APOGEE Graphics to include newer style cliparts, equipment
backgrounds, charts, realistic gauges and thermometers.
Course Length:
Three days ending at 4:30 pm on the third day.
Prerequisite:
APOGEE Workstation Operations (5-620) or APOGEE with
BACnet for Experienced Insight Users (5-710) or APOGEE
with BACnet Workstation Operations (5-720).
Additional Information:
Students need to bring an existing graphic with them to
class. This graphic will be used during the class.
16 Building Automation
Classroom Training Course
Building Automation 17
Classroom Training Course
Note: This class is taught at a rapid pace with large amounts of new information presented each day.
Students who complete every day of this class will receive the Master Operator Curriculum plaque.
The topics from the three classes will be taught in the following order:
18 Building Automation
Classroom Training Course
Building Automation 19
NEW! Classroom Training Course
• Perform database backup and restoration for BACnet BLN and P1 FLN devices.
Datamate Advanced
• Communicate with BACnet ALN/BLN and P1 FLN devices.
• Use Point Monitor, Point Log and Subpoint Log to display point information.
Point Operations • Command points at the ALN/BLN and FLN levels.
• Describe point addressing schemes for ALN/BLN and FLN device.
• Analyze the sequence of operation for VAV, Constant Volume, Heat Pump and
FLN Device Applications
Unit Ventilator applications.
• Identify and describe the function of and interaction between the different
TEC Communication
memory types in TECs.
and Startup
• Identify the three types of subpoints in TECs.
Automation Level/ • Describe DDC networking requirements for BACnet field panels.
Building Level • Interpret LED indicator action.
Participants:
System users who need skills to control and monitor building control systems
from BACnet field panels and P1 terminal equipment controllers.
Course Length:
Four days ending at noon on the fourth day.
Prerequisites:
APOGEE Workstation Operations (5-620) or APOGEE with BACnet for
Experienced Insight Users (5-710) or APOGEE with BACnet Workstation
Operations (5-720) or Desigo CC Workstation Operations (5-920).
Note: This course includes Insight P1 FLN operations and additional FLN
device applications. The training uses BACnet field panels, Insight and
Datamate Advanced software.
20 Building Automation
Classroom Training Course
Commander
• Monitor and command system points to control
building equipment.
“Working with the
simulator in labs
• Manage alarms from graphics.
Graphics • Utilize dynamic information in the Graphics was very helpful
application.
in applying what
• Create trend definitions.
Trend • Collect trend data. we learned.”
• Analyze trend data.
Thomas with City of Riverside
• Generate a dynamic plot to monitor system
Dynamic Plotter
information.
Building Automation 21
Classroom Training Course
Prerequisite:
“Great learning experience. APOGEE with BACnet
Workstation Operations (5-720).
Well designed course completed
with a good instructor.” CEUs: Price:
2.7 CEUs $1,995 (U.S.)
Ken with CB Richard Ellis
22 Building Automation
NEW! Classroom Training Course
The topics from the three classes will be taught in the following order:
Building Automation 23
Classroom Training Course
Use Insight Reports • Use data displayed for various Insight reports to aid
for Troubleshooting in troubleshooting components and system problems.
24 Building Automation
Classroom Training Course
Building Automation 25
Classroom Training Course
5-925 Desigo CC
Advanced Operations (3 days)
Learn to use the advanced features of the Desigo CC workstation.
• Open a program.
Working with PPCL • Modify a program.
• Save a program.
Participants:
Advanced users, managers and system
administrators who need to create and modify
points, graphics and user accounts.
Course Length:
Three days ending by 4:30 pm on the last day.
Prerequisite:
Desigo CC Workstation Operations (5-920)
CEUs: Price:
2.3 CEUs $1,995 (U.S.)
26 Building Automation
» Overview Courses
Course: Participants:
APOGEE Terminal
Building personnel who need basic operating skills with APOGEE TECs
Equipment Controllers – TEC
Field Panel Go Building personnel who need operating skills with Field Panel Go systems
Fume Hood Hardware Building personnel who need basic information on fume hood hardware
and Controls and controls
Fume Hood Safety Building personnel who need to safely operate fume hoods
Insight 3.12 for Existing Users Building personnel who need operating skills with the Insight system
Insight 3.12 for New Users Building personnel who need operating skills with the Insight system
Insight 3.13 for Existing Users Building personnel who need operating skills with the Insight system
Insight 3.13 for New Users Building personnel who need operating skills with the Insight system
Building Automation 27
» Self-Study Materials
Web-Based and CD
Training Requirements CD Web
To benefit fully from the web and CD training, students should have basic computer skills
before beginning the training.
Recommended
Windows 7/98/NT/XP or 2000, Pentium IV or higher, 1 GHz
clock speed with 512 MB RAM,16x CD-ROM, color monitor
that is capable of displaying thousands of colors at 1,024 x
768 pixels, 16-bit sound card, Windows Media Player,
Adobe Flash Player 10 or higher.
Mac:
Safari 3 or later, Firefox 1.0 or later, Google Chrome 14
or later
Linux:
Firefox 1.0 or later
Apple iOS:
Training courses created with Articulate Storyline
software can be viewed with the Articulate Mobile
Player App (available on iTunes) for iPad. Apple iOS
5.0 or higher
28 Building Automation
Self-Study Materials
CD Training Packages
CD versions of the self-study courses are available for $299 (U.S.) each.
A 25% discount is given on each additional CD when you order two or more CDs.
See page 70 for the CD order form. Log on to www.siemens.com/esonline to view the price
for the web-based version of the self-study courses.
Building Automation 29
Self Study Materials
DCC 100
Introduction to Desigo CC
This module provides an introduction to the Desigo CC Students will learn how the new
Management Station. management station is built on
existing Siemens technology to
make an easy to use system that
Topic: You will learn to:
is smart, adaptable, open and
• Understand how Desigo CC pulls together multiple robust. Students will observe
disciplines in a full-featured control station. the Desigo CC workflow through
a series of video demonstrations
Platform Design • Understand how Desigo CC is easy to use,
showcasing some of the basic
anticipates the user’s needs, is adaptable, open to
applications of Desigo CC.
integration and built on Siemens SCADA platform.
Participants:
Workflow • Understand the workflow of Desigo CC.
Building personnel who need an
overview of the Desigo CC
• Use basic applications, including: Management Station.
Applications - Graphics - Trending - Reporting
- Video - Scheduling - Event Treatment
Price: CD version $299 (U.S.)
30 Building Automation
Self-Study Materials
Building Automation 31
Self Study Materials
Note: These modules are linear-based software simulators and only provide
the ability to complete specific steps performed in the demonstration.
Trend
• Collect Trend data manually using Insight applications.
Collections
32 Building Automation
Self Study Materials
Points
• Describe the different types of subpoints. Price:
• List the function of selected subpoints.
CD version $299 (U.S.)
• Do basic operations.
• Set a minimum and maximum room temperature setpoint.
Operation • Trace the generation of the temperature control setpoint.
• List the requirements for a TEC to switch between heating
and cooling modes.
MBC-RBC Interactive
Technical Manual
This interactive technical manual provides detailed information for the MBC and RBC field
panels for quick reference on the job.
Internal
• Identify the internal components with an enclosure. Additional Information:
Components
This course has no audio. It is
• Identify the processor types, connectors, and LED designed as a technical reference
Open Processor library for troubleshooting and
diagnostics.
maintenance while on the job.
• Identify the module components, current limiting This course is set-up for you to be
Power Modules able to find reference data on
features and LED diagnostics.
any component within a
Point Termination • Identify the PTM types and components with detailed few mouse clicks.
Modules reference for each type.
Building Automation 33
Self Study Materials
Series
• Identify the available options.
Operations
34 Building Automation
Self Study Materials
Building Automation 35
02:
Fire Safety
Classroom Training
Self-Study Materials
Training Options
We offer training classes at locations
throughout the U.S. and Canada. We
provide fire safety equipment for each
student to practice with during the classes.
If you have several students to train, you
may want to schedule a class at your
facility to save on student travel expenses.
36 Fire Safety
Training Options
Training Software
Programming software is provided for use Equipment Requirements
during classes. The software is for training Siemens Building Technologies provides fire safety
use only and will not operate in customer equipment and simulators for training classes. Each
installations. Contact your Siemens student must bring a laptop computer to training
representative to purchase a software that meets the following minimum hardware and
license and software. software requirements.
Microsoft Windows version 2000 (with Service Pack 1 or Microsoft Windows version 2000, Windows XP, or
greater), or Windows XP; Pentium-class CPU with 200 Windows 7; Pentium-class CPU with 1.6 GHz minimum
MHz minimum speed; 64 MB RAM minimum (128 MB or speed; 512 MB RAM minimum; CD-ROM drive; USB drive;
more recommended); CD-ROM drive or USB memory Ethernet Port; 1024 x 768 minimum screen resolution; 1
card; 800 x 600 screen resolution; 250 MB available hard GB available hard disk space; Microsoft Internet Explorer
disk space; 2-button mouse; Microsoft Internet Explorer or similar browser; Acrobat Reader version 6 or higher;
version 4 or later; a serial port (USB to serial port adapter 2-button mouse; serial port (USB to serial port adapter
operating at COM1 or COM2 may also be used as long as operating at COM1 or COM2 may also be used as long as
the software driver is installed). the software driver is installed).
Note: A laptop running either Windows Vista or Note: A laptop running Windows Vista operating system
Windows 7 CANNOT be used in this class. The student CANNOT be used in this class. The student must have
must have Administrator access to the laptop computer. Administrator access to the laptop computer and bring an
A to B serial cable to communicate with training panels.
Fire Safety 37
» Classroom Training Courses
Training Coordinator
“The instructor
kept the class fun
and interesting.”
Ewa Klimek Steve with University of North Carolina, Chapel Hill
38 Fire Safety
Classroom Training Course
CEUs:
2.7 CEUs
Fire Safety 39
Classroom Training Course
Participants: Prerequisite:
Persons responsible for Successful completion of FIS 1114.
engineering, installing, Knowledge of Acculink software
maintaining or operating an is helpful.
MXL Voice System.
Required Equipment:
Course Length: Students must bring a laptop
Four days ending by noon on computer to training. Please refer
the fourth day. to page 37 for more information.
CEUs:
2.7 CEUs
40 Fire Safety
Classroom Training Course
“I liked the
hands-on
time with the
software and
on the demo
panels.”
Bryon with RFI
Communications & Securities
Fire Safety 41
Classroom Training Course
Course Length:
Ten Steps to • Follow the steps from project specifications to compiling
Four days ending by noon
Programming your configuration.
on the last day.
Logic Functions
• Use basic and complex logic including inputs and outputs. Prerequisite:
• Understand logic and timer functions.
Successful completion of
FIS 1114.
Functional Block • Create functional block diagrams.
Note: This class does not
teach voice programming
Diagrams • Use functional diagrams to de-bug your program. functions. These are taught
in the MXL Voice IOM (FIS
Workshop • Apply the ten steps to programming. 1124) class.
Exercises • Design MXL Fire Alarm System configurations.
Required Equipment:
Students must bring a laptop
computer to training. Please
note that the laptop should
not have the programming
software installed. Please
refer to page 37 for more
information.
CEUs:
2.7 CEUs
42 Fire Safety
Classroom Training Course
Fire Safety 43
Classroom Training Course
Workshop Exercises • Operate an XLS voice panel in emergency and maintenance situations.
Participants: Prerequisite:
Persons responsible for engineering, installing Successful completion of FIS 2114 is
or maintaining an XLS Voice System. required. Knowledge of the ZEUS
programming tool is helpful.
Course Length:
Four days ending by noon on the last day. Required Equipment:
Students must bring a laptop
computer to training. Please refer to
page 37 for more information.
CEUs:
2.7 CEUs
“The instructor
has some field
experience which
allowed for more
active interaction.”
Jerry with First Security Systems
44 Fire Safety
Classroom Training Course
Prerequisite:
Successful completion of FIS 2114.
Knowledge of the ZEUS programming
tool is strongly recommended.
Fire Safety 45
“The instructor
took the time to
make sure you
understood the
topic before
moving on.”
Boyd with Engineered
Monitoring Systems, Inc.
CEUs:
2.7 CEUs
46 Fire Safety
Classroom Training Course
Fire Safety 47
Classroom Training Course
48 Fire Safety
Classroom Training Course
Fire Safety 49
Classroom Training Course
50 Fire Safety
Classroom Training Course
Fire Safety 51
Classroom Training Course
Workshop Exercises • Operate, test and troubleshoot the FS-250 panel. Prerequisite:
Working knowledge of addressable
fire alarm systems, IBM computers
and DOS is assumed.
Required Equipment:
Students must bring a laptop
computer to training. Please refer to
page 37 for computer hardware and
software requirements.
CEUs:
1.5 CEUs
52 Fire Safety
Classroom Training Course
Project
• Overview of enclosure integrity testing.
Management
Fire Safety 53
Classroom Training Course
Codes and Standards • Identify the NFPA codes and standards for ASSD systems.
Detectors • Install, maintain and operate the various detection models and units.
Display • Use the operating display to control the air sampling unit.
Pipe Design Programs • Use the pipe design program (Aspire) to validate the air sampling designs.
Participants:
Persons responsible for engineering, installing
or maintaining VESDA air sampling systems.
Course Length:
Four days ending by noon on the last day.
Prerequisite:
None
Required Equipment:
Students must bring a laptop computer to
training. Please refer to page 37 for computer
hardware and software requirements.
CEUs:
2.7 CEUs
54 Fire Safety
Classroom Training Course
Fire Safety 55
Classroom Training Course
“I liked installing
the device.”
Paul of Lawrence Livermore
National Laboratory
56 Fire Safety
NEW! Classroom Training Course
• Identify the standard and optional modules for the FV2025/FV2050/VR2005 panels.
Basic Control • Explain voice card and system limitations.
Unit and Hardware • Design voice panel equipment lists based on customer scenarios.
• Draw a basic Desigo voice wiring diagram.
• Operate the microphone and switch modules of a voice station to test voice
system functionality.
• Differentiate how voice channels for a single panel and audio carriers for networked
Basic System
voice effect the system.
Operations
• Demonstrate LED behavior for voice priority activations on a voice panel.
• Describe how visibility effects a voice station and its switch module behavior.
• Define how access control effects the voice system.
• Use the Desigo Engineering Tool to build customer sites that require voice.
• Design FV2025 and FV2050 systems.
Desigo Fire Safety
• Use Mass Notification 1 and 2 to trigger mass notification messages.
Configuration Tool
• Program Internal and External Voice station microphones and switch modules.
• Customize the global system configuration to meet site specific needs.
Participants:
Persons responsible for
engineering, installing,
maintaining or programming a
Desigo Life Safety Voice system.
Course Length:
Four days ending at noon on the
fourth day.
Prerequisites:
Successful completion of the
FIS 9104 is required.
CEUs:
2.7 CEUs
Fire Safety 57
Classroom Training Course
58 Fire Safety
NEW! Classroom Training Course
• Identify the standard and optional modules for the FV922/FV924/VR2005 panels.
Basic Control • Explain voice card and system limitations.
Unit and Hardware • Design voice panel equipment lists based on customer scenarios.
• Draw a basic Cerberus PRO voice wiring diagram.
• Operate the microphone and switch modules of a voice station to test voice system
functionality.
• Differentiate how voice channels for a single panel and audio carriers for networked
Basic System
voice effect the system.
Operations
• Demonstrate LED behavior for voice priority activations on a voice panel.
• Describe how visibility effects a voice station and its switch module behavior.
• Define how access control effects the voice system.
• Use the Cerberus PRO Engineering Tool to build customer sites that require voice.
• Design FV922 and FV924 systems.
Cerberus PRO
• Use Mass Notification 1 and 2 to trigger mass notification messages.
Configuration Tool
• Program Internal and External Voice station microphones and switch modules.
• Customize the global system configuration to meet site specific needs.
Participants:
Persons responsible for
engineering, installing,
maintaining or programming
a Cerberus PRO Voice system.
Course Length:
Four days ending at noon on
the fourth day.
Prerequisites:
Successful completion of the
FIS 9504 is required.
CEUs:
2.7 CEUs
Fire Safety 59
» Self-Study Materials
Topics Include:
• Fire Alarm System Selection
• MXL Fire Alarm System Operation
• MXL Field Devices, including Detection Devices,
Initiating and Signaling Devices and Accessories
• MXL Core System Components
• MXL System Components and Options, including
Voice and Network Options
Audience:
Students must complete this training before
attending the FIS 1114 classroom training. This
material is also helpful to anyone who needs to
understand the MXL or MXLV Fire Safety Systems.
Duration:
Approximately 3 hours
60 Fire Safety
Self Study Materials
Topics Include:
• Fire Alarm System Selection
• XLS Fire Alarm System Operation
• XLS Field Devices, including Detection Devices, Initiating
and Signaling Devices and Accessories
• XLS Core System Components
• XLS System Components and Options, including Voice and
Network Options
Audience:
Students must complete this training before attending the FIS
2114 classroom training. This material is also helpful to anyone Duration:
who needs to understand the XLS or XLSV Fire Safety Systems. Approximately 3 hours
Duration:
Approximately 1 hour
Fire Safety 61
Self Study Materials
Duration:
Approximately 1 hour
Duration:
Approximately 1 hour
62 Fire Safety
Self Study Materials
Fire Safety 63
03:
Security
Products
Classroom Training
Training
Options
Our training courses include SiPass
access control equipment for
students to practice with during the
classes. If you have several students
to train, you may want to schedule a
class at your facility to save on
student travel expenses.
64 Security Products
Training Options
Classroom
Training Courses
How to enroll: Cancellation Policy:
Call 1-800-487-7771, Students who cancel within 21 calendar days of the
email performancegroup.ic@siemens.com class start date will be charged 50% of the tuition.
or log on to www.siemens.com/esonline. Students will be charged 100% of the tuition if they
cancel the day of the class or do not attend. The
Lodging & Transportation: cancellation fee may be waived if your organization
sends a qualified student as a substitute.
Students are responsible for their lodging and
transportation when attending training at any
Note: Siemens reserves the right to cancel classes and
location. Hotel and travel recommendations are
assumes no liability for expenses incurred by students
available online at www.siemens.com/esonline.
due to class cancellation. All students will be notified
of class cancellations.
Confirmation:
If a confirmation letter is not received three weeks
before the class begins, call 1-800-487-7771 or email
performancegroup.ic@siemens.com.
Security Products
Training Team
Certified Instructor
Robbie Culver
Security Products 65
» Classroom Training Courses
66 Security Products
Classroom Training Course
Participants:
Experienced SiPass Integrated
operators and administrators.
Course Length:
Four days ending by noon on
the fourth day.
Prerequisite:
5-420 SiPass Access Control
CEUs:
2.7 CEUs
Security Products 67
Notes:
68 Notes
Training Enrollment Form
Please fax or email the completed enrollment form to the Performance Group at
performancegroup.ic@siemens.com or (847)215-4792. We will notify you within two
business days after we receive your enrollment form.
Student Phone No: ( ___ ___ ___ ) ___ ___ ___ - ___ ___ ___ ___ Fax No: ( ___ ___ ___ ) ___ ___ ___ - ___ ___ ___ ___
Company Name : *
Service Agreement
Student’s Email Address : *
Mailing Address*:
City*: State*: ZIP*:
Supervisor’s Name*: Supervisor’s Signature*:
Supervisor’s Email*:
Course Information
Course Name & Number*:
Class Dates*:
Location*:
Dietary Restrictions:
Billing Address Same as Student Information
Billing Address*:
City*: State*: ZIP*:
Phone No: ( ___ ___ ___ ) ___ ___ ___ - ___ ___ ___ ___ Fax No: ( ___ ___ ___ ) ___ ___ ___ - ___ ___ ___ ___
Payment Information*
Purchase Order #: Check #:
Job #: SAP Customer Sold To #:
Credit Card: VISA MC AMX (Contact your local Siemens office if you do not have this information)
For security reasons if you are paying with a credit card, please provide the name and phone number of the
person responsible for payment. We will contact them for the credit card information.
Name: Student Cancellation Policy: Students who cancel within 22 calendar days of the
class start date will be charged 50% of the tuition. Students will be charged 100%
Phone No: ( __ __ __ ) __ __ __ - __ __ __ __ of the tuition if they cancel the day of the class or do not attend. The cancellation
Cardholder Name: fee may be waived if your organization sends a qualified student as a substitute.
Cancellation request need to be requested on www.siemens.com/esonline.
Cardholder Signature: Note: Siemens Building Technologies reserves the right to cancel classes and
assumes no liability for expenses incurred by students due to class cancellation.
All students will be notified of cancellations approximately one month before
classes begin. © 2014 Siemens Building Technologies.
Enrollment Form 69
» CD Order Form
Interactive Self-Study
CD Training Courses
Pricing: $299 Each | $224.25 each when you purchase two or more (25% Discount)
APOGEE Insight Basics FIS 100 Fire Detection and Alarm System Basics
APOGEE Reports 2.0 FIS 150 MXL and MXLV Fire Panels and Components
APOGEE Scheduler 2.0 FIS 250 XLS and XLSV Fire Panels and Components
Payment Information:
For security reasons if you are paying with a credit card, please provide the name and phone number of the
person responsible for payment. We will contact them for the credit card information.
Contact Name: Phone No: ( ___ ___ ___ ) ___ ___ ___ - ___ ___ ___ ___
Email:
Shipping Information:
Attention To:
Name of Organization:
Address:
Email: Phone No: ( ___ ___ ___ ) ___ ___ ___ - ___ ___ ___ ___
70 CD Order Form
Performance Group Training Directory - 2015
Siemens Building Technologies
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
1-800-487-7771
Training Directory
Siemens Building Technologies
2 Kenview Boulevard
Brampton, Ontario L6T 5E4
Canada
905-799-9937
www.siemens.com/esonline