Mobil SHC 600 Series

Marine performance profile
Mobil SHC™ 600 Series

Synthetic circulating and gear oils
Product features Potential benefits

For more than 40 years, Mobil SHC™ 600 Series Mobil SHC 600 Series oils can help:
synthetic circulating and gear oils have delivered
1 Reduce equipment downtime

premium performance in gearboxes, even in
extreme conditions and temperatures or under
heavy loads. They are formulated to:
• Provide exceptional rust and

corrosion protection
2 Minimise maintenance
• Limit power consumption
3 Minimise operational costs
• Offer excellent demulsibility
• Deliver outstanding foam control and

air-release properties
4 Extend oil life by up to six times vs.
conventional oil
500+ major Potential to reduce operating costs

The lubricants’ low fluid friction cuts operating temperatures compared with
equipment builders mineral-based alternatives. This improves gear efficiency and reduces power
consumption. The oils last up to six times longer than mineral oils, extending
recommend these drain intervals and reducing waste oil and disposal costs. Not only does this help
marine operators save money, it also reduces the vessel’s environmental impact.
lubricants in 1,800+
applications.
Applications No Objection Letters
Fuel and lubricant centrifuges ✓

Bearing wear protection
In FAG FE8 bearing testing, Mobil SHC 600 Series
Cranes ✓
lubricants protect bearings significantly better than Hard-to-service equipment ✓
conventional oils.
Range of deck machinery ✓
40 Applications where costs of component replacement,
wear, mw50 (mg)
✓
FAG FE8 Roller
30 system cleaning and lubricant changes are high

L owe r =
bet ter
20
10
0
Mobil SHC Conventional
600 Series industrial gear oil
Mobil SHC™ 600 Series
Greatly outperforms standard mineral oils
Formulated from synthetic base oils with an inherently Up to 3.6% reduced energy
high viscosity index and a proprietary additive system,
Mobil SHC™ 600 Series lubricants offer performance
consumption versus conventional
advantages that mineral oils cannot match.
oils in field and laboratory tests.*
Typical properties†
Mobil SHC 600 Series 624 625 626 627 629 630 632 634 636 639
ISO Viscosity Grade 32 46 68 100 150 220 320 460 680 1000
Viscosity, ASTM D 445
cSt @ 40ºC 32 46 68 100 150 220 320 460 680 1000
cSt @ 100ºC 6.3 8.5 11.6 15.3 21.1 28.5 38.5 50.7 69.0 98.8
Viscosity Index, ASTM D2272 148 161 165 162 166 169 172 174 181 184
Pour Point, ºC, ASTM D5950 -57 -54 -51 -45 -39 -36 -33 -30 -30 -27
Flash Point, ºC, ASTM D 92 236 225 225 235 220 220 225 228 225 222
Density @ 15°C (60°F), g/cc ASTM D4052 0.85 0.85 0.86 0.86 0.86 0.87 0.87 0.87 0.87 0.87
Appearance, visual Orange Orange Orange Orange Orange Orange Orange Orange Orange Orange
TOST, ASTM D 943 mod, hours 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+
RPVOT, ASTM D 2272, minutes 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
Rust protection, ASTM D665B,

Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass
Synthetic Sea Water
Water Separability, ASTM D1401,Min. to 37 ml
10 15 15 - - - - - - -
water @ 54ºC
Water Separability, ASTM
- - - 15 20 20 20 20 20 25
D1401, Min. to 37 ml water @ 82ºC
Copper Corrosion, ASTM D130,
1B 1B 1B 1B 1B 1B 1B 1B 1B 1B
24 hrs @ 121ºC
15/0, 10/0, 10/0,
Foam Test, ASTM D892, Seq I,II,III Tendency/ 0/0, 10/0, 0/0, 0/0, 0/0, 10/0, 0/0, 0/0, 0/0, 0/0, 0/0, 0/0, 0/0, 0/0,
20/0, 30/0, 20/0,
Stability, ml/ml 0/0 0/0 0/0 0/0 0/0 0/0 0/0
25/0 10/0 10/0
FZG gear scuffing test, A/8.3/90, ISO 14635-1
11 12 12 12 13 13+ 13+ 13+ 13+ 13+
(mod), Failure Stage
FAG FE8 Bearing Wear Test 7.5/80-80 (DIN
- - - 2 2 2 2 2 2 2
51819-3) Roller Wear (mg)
*Energy efficiency relates solely to the fluid performance when compared with conventional reference oils of the same viscosity grade in gear applications. The technology used allows up to 3.6 percent efficiency
compared with the reference when tested in circulating and gear applications under controlled conditions. Efficiency improvements will vary based on operating conditions and applications.
†Typical properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal
manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local
ExxonMobil contact or visit exxonmobil.com. ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to
override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.
© 2017 ExxonMobil. All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation
or one of its subsidiaries. exxonmobil.com/marine

Mobil SHC 600 Series

Uploaded by

Copyright:

Available Formats

Mobil SHC 600 Series

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mobil SHC 600 Series

Uploaded by

Copyright:

Available Formats

Marine performance profile

Mobil SHC™ 600 Series

Product features Potential benefits

1 Reduce equipment downtime

• Provide exceptional rust and

• Deliver outstanding foam control and

500+ major Potential to reduce operating costs

Fuel and lubricant centrifuges ✓

30 system cleaning and lubricant changes are high

Viscosity, ASTM D 445

cSt @ 40ºC 32 46 68 100 150 220 320 460 680 1000

Rust protection, ASTM D665B,

You might also like