Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    Communication With Wecon LX5V Series (Ethernet)

    Uploaded by

    uclok

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Communication With Wecon LX5V Series (Ethernet)

    Uploaded by

    uclok
    60 views10 pages

    Original Title

    Communication With Wecon LX5V Series(Ethernet)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views10 pages

    Communication With Wecon LX5V Series (Ethernet)

    Uploaded by

    uclok

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Communication with Wecon LX5V series(Ethernet)

    Communication with
    Wecon LX5V series
    （Ethernet）
    V1.0

    Website: http://www.we-con.com.cn/en
    Phone: 86-591-8786886

    1
    Communication with Wecon LX5V series(Ethernet)

    Overview
    This document describes the communication between Wecon HMI PI3070ig and Wecon LX5V via
    RS422 serial port, and introduces it in three parts:
    Software Configurations of PLC
    Software Configurations of HMI
    Cable Wiring

    I Software Configurations of PLC


    1.1 PLC programmer software

    Figure 1-1

    1.2 New PLC project


    Open Wecon PLC Editor2, create a new PLC project or open the project that has been created.
    Create new project： [File]→[New]→[PLC Series(S)] LX5CPU→[PLC Model(T)] LX5V-N→[OK].

    2 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    Figure 1-2

    1.3 Viewing/Configuring Serial Port Parameters


    PLC Default Parameters:[ Project manage]→[Parameter]→[PLC Parameter]→[Com1 Settings]
    →[Whether to set]True
    [Communication settings]: [Baud rate]115200, [Data bit]8, [Stop bit]1,[Parity]No verification,
    [Protocol]Dedicated protocol;
    [Protocol related]: [Station number]1
    Note:The serial port parameters should be set depending on field requirements

    Figure 1-3

    3 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    1.4 Programming PLC project


    Using Wecon PLC Editor2 to program a PLC project depending on the requirements.

    Figure 1-4

    1.5 PC and PLC connection


    ① [PLC]→[Transfer Settings]→[Communication Settings]: PC and PLC are connected by USB
    cable,choose[USB Connection]→[Communication test]→The connection prompt appears→ [OK]→
    [OK]

    Figure 1-5

    4 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    1.6 Downloading PLC project


    ①[PLC]→[Write to PLC]→[Online operation]→[Param+program]→[Execute]→[OK]

    Figure 1-6

    5 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    II Software Configurations of HMI


    2.1 PIStudio

    Figure 2-1

    2.2 New project


    [Home]→[New]→[New project]→set the name,series and model of HMI→[Next]→[Screen style]
    →[OK].

    Figure 2-2

    6 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    2.3 Communication configuration


    ① [project]→[communication]→set the protocol and com parameters
    ② Choose protocol:
    select connection→[setting]→[communication device]:[communication]COM1, [serial port]RS422,
    [Device type]WECON,[Protocol] WECON LX5V Series→[OK]→[OK].

    Figure 2-3

    ③COM port setting:


    [device No.]1→[setting] →[COM port setting]:[connection]RS422,[Baud rate]115200,[Stop bits]1,
    [Databits]8,[Parity]NONE→[OK]→[OK].

    Note: Serial port parameters and PLC parameters need to be set consistently, please set them
    according to theactual situation.

    Figure 2-4

    7 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    2.4 Project making


    ①Using PIStudio to program a HMI project depending on the requirements.

    Figure 2-5
    ②After programming,[Home]→[Compile],you can download the project into HMI when
    compilation complete

    Figure 2-6

    8 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    2.5 Downloading project


    [Home]→[Download]→[PC Port]→[PC to HMI]→[OK].

    Figure 2-7

    9 WECON technology Co., Ltd


    Communication with Wecon LX5V series(Ethernet)

    III Cable Wiring


    3.1 Cable Wiring
    The cable Wiring illustration is as follow：

    Figure 3-1
    Pin Definition Diagram：

    Figure 3-2

    10 WECON technology Co., Ltd

    You might also like