Electronics Problem Statements

EC01 - Floating Point Matrix Multiplication
Matrix multiplication lies at the heart of numerous applications,

from computer graphics and image processing to machine
learning and scientific simulations. However, its computational
demands often become a bottleneck, hindering real-time
performance and large-scale analysis. Dedicated hardware
accelerators specifically designed for matrix multiplication offer a
compelling solution. These accelerators leverage custom
architectures and specialized components to achieve significant
speedups compared to general-purpose processors. By offloading
the computationally intensive tasks to such hardware, we can
unlock faster results, enable real-time processing, and tackle
larger and more complex problems, propelling advancements in
various fields.
Rules and Regulations
1)Use of Multisim Software is recommended

2)The circuit must be created using basic elements of digital
electronics only.
2)Other basic circuit requirements like transistors, resistors, clock,
displays, switches, power supply etc. can be used, if required.
3)Use of microcontrollers is not allowed.
4)Input given should be converted to half-precision floating point
format and the output should also be of the same format.
Problem Statement
Inputs : A matrix containing marks scored by 5 students in their

Cycle Test-1(CT-1), Cycle Test-2(CT-2), Assignment and End
semester exam with 20%, 20%, 10%, 50% weightages
respectively.
Expected outputs:
Output-1: Floating Point Adder- (weightage -10%).

Output-2: Floating Point Multiplier (weightage -15%).
Output-3: Average of End Semester marks of all the students
(weightage -25%).
Outputs -4: (weightage -50%).
A matrix consisting of the consolidated final marks of each
candidate out of 100.
Bonus :
Check if the empirical relationship between mean, median and
mode is followed (approximately)
Mean – Mode = 3 (Mean – Median)
Test Case:
● For Floating Point Adder and Floating Point Multiplier, the
inputs can be of your choice. (like 55.6+66.3 and 69.3*56.0,
do not use integers in your test case)
● For Output 3 and output 4 use inputs from the table given
below
Submission Guidelines
Submission should include (Create a drive folder with the

following files):
1. Circuit link or file
2. A full circuit downloaded image at high resolution
3. A pdf explaining your logic (with necessary screenshots).
4. A video (screen recording) containing simulation of your circuit
by testing it with the provided test case. (Maximum duration: 5
minutes)
5. Approach and other essential information about your
circuit that might be important for evaluation.
Partial submissions are also accepted. Remember:

The will to participate matters :)
Please follow the below folder structure:

Root folder name: TRINIT_<TeamName>_EC<ProblemCode>
Sub-folders:
TRINIT_<TeamName>_EC01/SimulationFiles –
All circuit simulation files to be kept here.
If you’re using an online simulator like circuitverse, add the circuit
link
in a word/google doc.
TRINIT_<TeamName>_EC01/CircuitExplanation –
The PDF explaining your logic (with necessary screenshots) and
high-resolution image of the circuit.
TRINIT_<TeamName>_EC01/DemoVideo – Video(s)
(Screen recording) demonstrating the simulation
(maximum duration: 5 minutes total).
Note: Don’t forget to update the root drive folder permissions to
“viewable by anyone with the link”. Failing to do so can result in
your
disqualification.
Submitting on D2C:
Create a public github repository with name-
“TRINIT_<TeamName>_EC<ProblemCode>” and upload the
drive link in the repository’s README. You are free to include any
extra files/explanations on the repository. Submit the GitHub
repository
link on D2C.
Resources:
IEEE Standard 754 Floating Point Numbers

https://www.geeksforgeeks.org/ieee-standard-754-floating-point-n
umbers/
Digital Electronics Basics

https://www.geeksforgeeks.org/digital-electronics-logic-design-tut
orials/
Multipliers
https://inst.eecs.berkeley.edu/~eecs151/sp18/files/Lecture21.pdf
Adders
https://ieeexplore.ieee.org/document/7164650
Multisim Software Installation

https://youtu.be/no9tLtRsOqQ?si=R68Im07qsK1mM20A
EC02 - Analog Equalizer circuit
The transmission of high-speed data on copper suffers from

frequency-dependent losses that can cause significant
intersymbol interference. The losses mainly arise from the
increase in series resistance at high frequencies due to the skin
effect. There are also dielectric losses, which are significant in the
GHz range and higher. To correct for frequency dependent losses,
a good Equalizer circuit is used in order to get the desired gain
back.
Problem Statement:
Have a scenario where you are an Analog design intern working

in CERN , switzerland. The operating area of the particle
accelerators are massive and the data collected at one end
should be processed by the supercomputers which are 12 Kms
far. Since the distance is too long , the cables used attenuates the
signal at certain frequencies and corrupts the actual signal that's
needed. Your job is to design a continuous time analog equalizer
circuit which processes the attenuated signal and nullifies the
effect of transmission wire to get the actual input signal back.
The below circuit is the model for the transmission wire. Assume
that the cables located at CERN and the circuit below give the
same frequency response. Design an EQ circuit for this
corresponding system to get a flat frequency response which also
matches the given specifications.
Image 1
Circuit description
The above circuit is a three stage op amp built using
transconductance amplifiers with transconductances Gm1 , Gm2 ,
Gm3. The amplifiers have finite output impedances at the output
node whose values are given in terms of conductances Go1 , Go2
and Go3. They also have capacitors C1 , C2 , C3 along with finite
impedances which are tied at the output node. C3 and C4 are the
miller compensated capacitors whose values are given below.
Find and study the behavior of this system considering Vo as
output and Ve as input differential voltage.
Hint : Find the frequency response of the above circuit by using
the fundamental laws of circuit theory.
The values given for the parameters above are:
10Gm1 = Gm2= 5 Gm3 = 200 micro Siemens

10Go1= Go2 = 20 Go3 = 2 micro siemens
C1 = 2C2 = 6 picofarad
Load capacitance CL = 10 picofarad
Load resistance RL = 125 kilo ohm
C3 = 2C4 = 1 picofarad
Rules and Regulations
1)The circuit must be created using basic elements of Analog

electronics only.
2)Op amps are not allowed and the use of MOSFETS are
necessary. The whole circuit should be a MOSFET based circuit
3)Use of microcontrollers is not allowed.
Circuit specifications:
1) The whole system should give a flat frequency response.
2) Include a power management circuit which shuts down the
circuit entirely when the output power of the equalizer
crosses certain threshold (fix your threshold according to the
VDD used and don't forget to mention your threshold in the
doc)
3) Your circuit should consume minimum power and should
have less loading effect
4) Your Equalizer circuit should be able to remove the noise
from the input signal too. (Hint : think of an amplifier which
can remove noise )
Evaluation Criteria:
1. How flat is your system(given circuit and Equalizer circuit
combined) response
2. How power efficient is your circuit
3. Working of power protector circuit
4. Your study of the given circuit (image 1)
5. The use of MOSFETS in the circuit
Submission Guidelines:
Submission should include (Create a drive folder with the

following files):
1. Circuit link or file
2. A full circuit image downloaded at high resolution
3. A pdf explaining the working of your circuit (with necessary
screenshots).
4. Attach the calculations made to study the frequency response
of the given system and specify the pole and zero locations
5. The frequency response image of the given circuit (image 1)
and the frequency response of your equalizer circuit.
6. Finally, attach the frequency response image of the whole
system (given system and your EQ circuit combined)
7. Include a video with a voice over which shows the entire
simulation of frequency response of the system and also the
working of the power management circuit.
8. Any other document which would help in evaluation are
welcomed
Partial submissions are also accepted.

Remember: The will to participate matters :)
Software to be used : LT spice.

You are also free to use open source online tools to get
the bode plot etc.
Please follow the below folder structure:

Root folder name: TRINIT_<TeamName>_EC<ProblemCode>
Sub-folders:
TRINIT_<TeamName>_EC02/SimulationFiles –
Add all your spice simulation files here.
TRINIT_<TeamName>_EC01/CircuitExplanation –
The PDF explaining your logic (with necessary screenshots) and
high-resolution image of the circuit.
TRINIT_<TeamName>_EC01/DemoVideo – Video(s)
(Screen recording) demonstrating the simulation
(maximum duration: 5 minutes total).
Note: Don’t forget to update the root drive folder permissions to

“viewable by anyone with the link”.
Submitting on D2C:
Create a public github repository with name-
“TRINIT_<TeamName>_EC<ProblemCode>” and upload the
drive link in the repository’s README. You are free to include any
extra files/explanations on the repository. Submit the GitHub
repository
link on D2C.
Resources:
Basics of bode plot:

https://www.youtube.com/playlist?list=PLUMWjy5jgHK24TCFwng
V5MeiruHxt1BQR
Frequency response in Spice:

https://www.youtube.com/watch?v=I-y03jwWq-U
Transconductance amplifiers:
https://www.eeeguide.com/transconductance-amplifier/
Basics of frequency response:
https://ee.sharif.edu/~faez/ch14.pdf
To get an idea of Equalizer circuit:

https://www.homemade-circuits.com/10-band-graphic-equalizer-ci
rcuit-for/
https://www.electroschematics.com/3-band-equalizer/
As always , you have an abundance of resources on the internet.

Use it wisely :)
EC03 Topic: Implementing Controller Area Network in CAN
2.0B Format Controller
In the automotive industry's evolution, the shift from point-to-point wiring to in-vehicle
networks revolutionized electronic device connections, addressing the challenges of
bulky, costly wire harnesses. The emergence of CAN, a high-integrity serial bus system,
became the standard for networking intelligent devices, leading to the adoption of ISO
11898 in 1993, enhancing efficiency across various
markets.
Problem Statement: The problem statement is to

design a single-bus CAN digital controller for the given
.cir file in the diagram consisting of a CAN bus and
three sets of Transmitters and receivers(the CAN bus
implemented In the diagram has logic 0 as dominant
and logic 1 as recessive state like CAN physical layer).
● Design and Instantiate a CAN controller for
each
transmitter and receiver pair
● The CAN controller processes input messages
and the receiver's identifier while monitoring the
CAN bus to determine availability. Upon
accessing the bus, it generates the message
frame for transmission.
● Create a receiver controller that only accepts
the CAN 2.0B message having the correct
identifier
● Make an arbitrating mechanism if the bus is already being accessed by some
other transmitter
Software Used:
LogiSim (Find download link in Resources)
Implementation Rules:
● Use logic 0 as the dominant bit and logic 1 as the recessive
● Only one bit is transmitted at once
● Each message frame must include SOF, Identifier, (optional) IDE, Data
Length(DLC), Data field, (optional)CRC, (optional) CRC delimiter,
(optional) ACK, (optional) ACK delimiter, and EOF.
● Importing any kind of HDL library is not allowed.
● No hard coding is allowed except for the contents of the state diagram.
Actual convolutional code encoding and decoding must take place.
● Good design practices are expected, such as modularising your circuit
with subcircuits
● All sequential elements must trigger on Rising Edge.
● All elements must be active high, including asynchronous sets and resets.
Test Cases : ( All TEXT should be encoded in utf-8 bytes )
Case 1: Standard ID transmission from TX1 and reception at RX2 or RX3

message.identifier =0x1AB, message.DLC=6. message = “TRINIT”
Case 2: Extended ID Test transmission from TX1 and reception at RX2 or

RX3
message.identifier =0x10032024, message.DLC=8. message = “TRINIT24”
Case 3: Arbitration implementation test simultaneous transmission from

TX1,TX2, TX3 and reception sequence at RX1 RX2, RX3 is observed should
follow the standard arbitration rules
TX1 message
message.identifier =0x001, message.DLC=6. message = “ONENIT”
TX2 message
message.identifier =0x002, message.DLC=6. message = “TWONIT”
TX3 message
message.identifier =0x003, message.DLC=6. message = “TRINIT”
Submission Rules:
1. You must submit the “.circ” circuit file.

2. Provide the steps to simulate your circuit in a .txt file.
3. Provide a .txt file containing the outputs in the form of English alphabets.
4. Provide a .pdf file explaining the logic behind your circuit. Attach any paperwork
like state tables, etc., if needed. Also, describe all subcircuits used in your circuit.
5. Provide a screen recording of you simulating the input message
Brownie Points
1. Implement the option to switch to CAN 2.0B extended format by using the
recessive value in the IDE field of the message frame
2. Implement an option to change the data length arbitrarily in the DLC field of the
message frame
3. Implement the CRC and ACK mechanism for error handling and successful
recipient of messages.
4. Implement a CAN filter and mask mechanism to lighten the burden on the
receiver and only listen to the message intended for it
References
1. https://www.eecs.umich.edu/courses/eecs461/doc/CAN_notes.pdf
2. LogiSim download link

Electronics Problem Statements

Uploaded by

Copyright:

Available Formats

Electronics Problem Statements

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Electronics Problem Statements

Uploaded by

Copyright:

Available Formats

EC01 - Floating Point Matrix Multiplication

Matrix multiplication lies at the heart of numerous applications,

Rules and Regulations

1)Use of Multisim Software is recommended

Inputs : A matrix containing marks scored by 5 students in their

Output-1: Floating Point Adder- (weightage -10%).

Submission should include (Create a drive folder with the

Partial submissions are also accepted. Remember:

Please follow the below folder structure:

IEEE Standard 754 Floating Point Numbers

Digital Electronics Basics

Multisim Software Installation

EC02 - Analog Equalizer circuit

The transmission of high-speed data on copper suffers from

Have a scenario where you are an Analog design intern working

The values given for the parameters above are:

10Gm1 = Gm2= 5 Gm3 = 200 micro Siemens

1)The circuit must be created using basic elements of Analog

Submission should include (Create a drive folder with the

Partial submissions are also accepted.

Software to be used : LT spice.

Please follow the below folder structure:

Note: Don’t forget to update the root drive folder permissions to

Basics of bode plot:

Frequency response in Spice:

To get an idea of Equalizer circuit:

As always , you have an abundance of resources on the internet.

Problem Statement: The problem statement is to

Test Cases : ( All TEXT should be encoded in utf-8 bytes )

Case 1: Standard ID transmission from TX1 and reception at RX2 or RX3

Case 2: Extended ID Test transmission from TX1 and reception at RX2 or

Case 3: Arbitration implementation test simultaneous transmission from

1. You must submit the “.circ” circuit file.

You might also like