Gas Detection

Honeywell BW™ Ultra

Multi-Gas Detector.
Extra Detection. Ultra Protection.
At Honeywell, we always put your safety where it should be – first.
With Honeywell BW™ Ultra, our new portable five-gas detector, you
will be able to do the same for your workers. Designed specifically for
sampling and monitoring confined spaces, before and after entry,
Honeywell BW™ Ultra has enhanced sensor technology, visibility
on gas readings, comfort, and connectivity. This makes it the most
reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.

The Honeywell BW™ Ultra complies with all safety regulations
in place by detecting your required gases. Furthermore, it
goes the extra mile by offering you the option to choose a fifth
sensor from a list of gases – for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the

market to feature the 1‑Series sensor, with fast response,
reliable performance and long life, even in extreme working H2S CO O2
conditions. That means high accuracy and lower costs.
LEL VOC CO2

SO2 NH3 H2

Cl2 NO2 HCN

NO

F E AT U R E S & B E N E F I T S

Ultra Easy Ultra Connected

• Tamper-proof operation with one button operation • Honeywell Connected Worker compatible
• Intuitive LCD icons for quick decision making • Honeywell TouchConnect™ Technology for activating a feature
• Easy service and maintenance • Honeywell SafetySuite for unit configuration and reporting
Ultra Visibility Ultra Comfortable
• Intuitive large dot matrix display giving clear readings • Ergonomically designed for easy use
• Smart Gas layout for clear sensor reading • Light yet rugged design
• Hole Watch Mode for quick decision making • Fits in the hand for easy sampling
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance Ultra Quick
Ultra Rugged • Quick responding sensor technology
• Honeycomb-designed housing for extra ruggedness • Quick decision making because large display
• Protection designed in the right place • Quick bump & calibration with IntelliDoX system
• Scratch-resistant display protector
Honeywell BW™ Ultra Technical Specifications
TECHNICAL SPECIFICATIONS SENSOR SPECIFICATIONS
SIZE 5.8 x 3.3 x 1.6 in. / 14.8 x 8.5 x 4.0 cm STANDARD
MEASURING
WEIGHT 14.5 oz. / 411 g (with clip)
GASES RANGE RESOLUTION
OPERATING TEMPERATURE -4 to +131° F / -20 to +50° C
OXYGEN (O2) 0-25% vol. 0.1% vol.
HUMIDITY 5 - 95% RH (non‑condensing) continuous
COMBUSTIBLE GASES (LEL) 0-100% LEL 1% LEL
INGRESS PROTECTION IP66/68
COMBUSTIBLE GASES (IR)* 0-5.00% vol. 0.01% vol.
ALARMS AND TYPE Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, OL (over limit)
HYDROGEN SULFIDE (H2S) 0-100 ppm 1 ppm / 0.1 ppm
SELF-TEST Activated detectors automatically perform one internal diagnostic
CARBON MONOXIDE (CO) 0-2,000 ppm 1 ppm
test every 24 hours (sensors, battery, and circuitry).
CARBON MONOXIDE (LOW H2) 0-1,000 ppm 1 ppm
TYPICAL BATTERY LIFE 18 hours (14 hours with PID or IR sensor) @ -4° F / -20° C
(CO-H)
PUMP DRAW Sample from up to 75 ft. / 22.9 m
SULFUR DIOXIDE (SO2) 0-100 ppm 0.1 ppm
CONNECTED WORKER • Bluetooth™ Low Energy (BLE) – Ability to connect
HYDROGEN (H2) 0-2,000 ppm 5 ppm
to Honeywell’s Safety Communicator App
• Honeywell TouchConnect™ – Easy ability to enter CARBON DIOXIDE (CO2) 0-50,000 ppm 100 ppm
Bump or Calibration mode or change Set-Points AMMONIA (NH3) 0-100 ppm 1 ppm
EVENT LOGGING 30 alarm events and 10 bump events VOLATILE ORGANIC 0-1,000 ppm 1 ppm
DATA LOGGING 45 days based on 8 hour shifts every 15 seconds logging COMPOUNDS (VOC) **
USER OPTIONS • Adjust STEL period (5-15 minutes in 1 minute intervals) CHLORINE (CL2) 0-20 ppm 0.1 ppm
• Calibration span levels NITROGEN DIOXIDE (NO2) 0-50 ppm 0.1 ppm
• Calibration interval
• Bump test interval HYDROGEN CYANIDE (HCN) 0-100 ppm 0.1 ppm
• Select combustible gases measurement: 0-100% LEL NITROGEN MONOXIDE (NO) 0-200 ppm 1 ppm
(Lower Explosive Limit) or Methane gas 0-5.0% v/v
• LEL and PID correction factors * Caution – the LEL IR combustible gas sensor option used in
• Calibration due date (1 to 365 days, or set to zero for off) Honeywell BW™ Ultra cannot detect certain combustible gases
• Individual sensor enable/disable including hydrogen and acetylene. The application should
• Latching alarms be reviewed to ensure the Honeywell BW™ Ultra can provide
• Stealth mode adequate detection. For more information, please contact
• Languages: English, French, German, Portuguese, Honeywell Analytics (www.honeywellanalytics.com).
Spanish, Simplified Chinese and Russian
** Please contact Honeywell Analytics for availability.
CERTIFICATIONS AND h: Class I, Div 1, Group A, B, C, D
APPROVALS Class I, Zone 0, Group IIC
ATEX : II 1G Ex ia IIC T4 Ga INTELLIDOX
IECEx : Ex ia IIC T4 Ga
DOCKING SYSTEM
X: European Conformity
For additional certifications, please review the manual or consult IntelliDoX combines
Honeywell Analytics. smart-docking
WARRANTY Instrument: 3 years modules with
Sensors: 3 years (2 years NH3, 1 year PID and Cl2)
Battery: 2 years our instrument
management
DUE TO ONGOING RESEARCH AND PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE. system to provide
automated testing
and record keeping.

Datasheet_Honeywell BW Ultra_DS01195-01_US-EN | 04/18

© 2018 Honeywell International Inc.