Hydro Crane Safety Check List

site: Subcontractor: Register No.: Inspection date:

⑦
⑨ ④
①
② ⑧

⑥
③ ⑤
T
No. Part item Inspection method M T W F S Su Inspection photo
h a

Overload When overloaded, the operation

①
limiter will be stopped with alarm sound

Before hook reaches to the top, operation

② Anti to block
stops with alarm sound Overload limiter A2B

Hook latch shouldn't have any abnormality

Hook &
③ such as detachment. Hook and sheave
Sheave
should rotate smoothly

There should be no wire cut on wire rope

④ Wire rope
Hook & Sheave wire rope
and end treatment should be good

Balance should be kept for maximum

⑤ Outrigger expansion. More than 2 struts should not
be used
Its weight should comply with manual and
Counter
⑥ stably fixed without being arbitrarily
Outrigger Counter weight
weight
manipulated

Wire rope Wire rope fixing pin should be installed on

⑦
fixing pin sheave

Hydraulic
Hydraulic motor, cylinder, pipe should not
⑧ system and
be worn, damaged and leak fixing pin Hydraulic cylinder
cylinder

Head, tail, fog, mars light should work

⑨ Lamps
normally

Brake & Functions of brake, clutch, controlling

⑩
Clutch gear should be normal Lamps Brake

Inspector's
opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Crawler Crane Safety Check List

site: Subcontractor: Register No.: Inspection date:

⑤ ② ⑦

④
⑧ ⑥
① ⑩
⑨

T
No. Part item Inspection method M T W F S Su Inspection photo
h a

Overloa When overloaded, the

①
d limiter operation will be stopped with
alarm sound

Before hook reaches to the top,

② Anti to Block Overload limiter A2B
operation stops with alarm sound

Luffing Inclination range of angle boom should be

③
limit properly controlled
device
Hook latch shouldn't have any abnormality
Hook
④ such as detachment. Hook and sheave Luffinglimitdevice Hook&Sheave
&
should rotate smoothly
Sheav
e

There should be no wire cut on wire rope and

⑤ Wire rope
end treatment should be good

Backlas Reverse rotation limit device and brakes

⑥
h device should working properly without any problem Wire rope Backlash device
Angle boom should not have crack or
Angle
⑦ deformation and connection part should be in
boom
good condition
(lattice)

Its weight should comply with manual

Counte Angle boom Counter weight
⑧ and stably fixed without being
r
arbitrarily
weight
manipulated
Track and Track should not have deformation or
⑨ damage
iron plate
and ground should be in a good condition
Brake Functions of brake, clutch,
⑩ Track Brake
& controlling gear should be normal
Clutch
Inspector's
opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Mobile Crane Safety Check
List
Site: Subcontractor: Register No.: Inspection date:

⑨ ① ⑧

③
⑦
②
⑩
④ ⑤
T
No. Part item Inspection method M T W F S Su Inspection photo
h a

Overload When overloaded, the operation will be

①
limiter stopped with alarm sound

Before hook reaches to the top,

② Anti to Block
operation stops with alarm sound Over load limiter A2B

Power is cut when button is pressed

Emergenc
③ and button should be red and manual
y stop
reset
device

Balance should be kept for maximum

Emergency button Outrigger
④ Outrigger expansion. More than 2 struts
should not be used

Hook & Hook latch device shouldn't be detached

⑤
wire from hook and rope shouldn't be cut
rope
There shouldn't be high tension
Setting
⑥ line, subsided ground and forward Hook latch device Equipment setting
Equipmen
work
t
around it
Fixing bolt shouldn't have loosed,
Slewin
⑦ damaged problem and fixing pin of
g
slewing device should be available for use
device

Major structure like chassis, cargo

Major Turn table pin Chassis
⑧ box should not have any deformation or
Structur
cracks
e

Hydraulic
Hydraulic motor, cylinder, line
⑨ and
should not be damaged, worn and
cylinder
leaked

Brake & Functions of brake, clutch, controlling Connection part Hydraulic cylinder
⑩
Clutch gear should be normal

Inspector's

opinion
 Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Fork Lift(High Lander) Safety Check List

Site: Subcontractor: Register No.: Inspection date:

⑨ ⑦

③
① ⑧ ②
⑥
⑤ ④
T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Rear view
Rear view camera should be on at all
① surveillance
times without any problem on monitor
camera

Controlle Controller, clutch, brakes should work

② Rear view camera Controller
r & Brakes normally with seat belts attached

Rear mirror
Rear view mirror should properly
③ &
attached and alarm device need to work
alarm
normally
device
Hydraulic There shouldn't be any damage, worn-out
Alarm Hydraulic cylinder
④ device and leakage on hydraulic motor, cylinder,
and pipe
cylinder
Track, Wheel (tire) should not have any cracks
⑤
Wheel (tire) and has good connection condition
Extra weight should not be added and
Counter
⑥ connection status of fixing bolt & nut
weight Wheel (tyre) Weight
should be firm
Fork Fork should not have any deformation,
⑦ (Unloadin cracks and fixing pin should be firmly
g attached
device)
Headlight, taillight, turn signal and warning Fork Lamps
⑧ Lamps
light should function normally

Head
Head guard, back rest should properly
⑨ guard &
installed without any deformation
Backrest
other
Side footboard, limit switch for crash
⑩ safety Head guard Back rest
prevention should be well installed
device
s
Inspector's

opinion
 Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 High Platform(Scissor) Safety Check List

Site: Subcontractor: Register No.: Inspection date:

⑨
⑦
①
⑩
⑧
③ ⑤
② ⑥

T
No. Part item Inspection method M T W F S Su Inspection photo
h a

Emergency Power is cut when button is pressed and

①
stop it should only be hand reset
button
Emergency Instruction should be attached and even
Emergency Emergency descent
② decen without power, platform should be able stop device
t to descend if controlled. button

device
Auto When a platform is ascending, operation
③
safety should be stopped.
device
Limit switch or bar for crash prevention
Crash
④ should be installed and normally Auto safety device Crash prevention
preventio
operated
n
(more than 2, 60cm above the fence)
Hydraulic There should not be any problems like
⑤ device and leakage, worn-out and damage
cylinder on hydraulic motor, cylinder and
pipe
Foot Lever should only work when it is covered Hydraulic cylinder Foot switch
⑥
switch with foot switch being pressed

Operation should not be possible when

⑦ Lever platform is slanted and it should show
clear operation status
Warning
Light and alarm should work when it is
⑧ light Lever Alarm
on operating, ascending, descending
and
alarm
extension pin, safety weight, boarding
⑨ Platform people and ladder should comply with
safety standard and in good condition

Track, Track or wheel (tire) should not have

⑩ Work platform Ladder
wheel(tire any cracks, slope and bumps
)
Inspector's

opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 High Platform(Boom) Safety Check List

Site: Subcontractor: Register No.: Inspection date:

⑦ ⑥

①/②

⑤
④ ⑧

T
No. Part item Inspection method M T W F S Su Inspection photo
h a

Emergency Power is cut when button is pressed and

①
stop it should only be hand reset
device
Emergency Instruction should be attached and even
Emergency Emergency
② descen without power, platform should be able stop device descent device
t to descend if controlled.
device
Overload When overloaded, the operation will stop
③
limiter with alarm sound

There shouldn't be any crack on track or

Track,
④ wheels. Slope and uneven surface
wheel(tire Overload limiter Wheel (tire)
should
)
not be on track
Foot Lever should only work when it is covered
⑤
switch with foot switch being pressed

Operation should not be done when a

⑥ Lever platform is slanted and clear operation
Foot switch joy stick
status should be showing
Warning
Light and alarm should work when it is
⑦ light
on operating, ascending, descending
and
alarm
Limit switch or bar for crash prevention warning
Crash platform
light/alar
⑧ should be installed and normally
preventio m
operated
n
(more than 2, 60cm above the fence)
When expanding a platform, install fixing
⑨ Platform pin and indicate info such as weight limit,
capacity
Hydraulic There shouldn't be problems like leakage,
⑩ device/ damage or worn-out on hydraulic motor, Main structure
Hydraulic
device/cylinder
cylinder cylinder, pipe
Inspector's

opinion
 Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Excavator Safety Check List
Site: Subcontractor: Register No.: Inspection date:

④
⑩
③ ①
②
⑨ ⑦
⑧ ⑤
⑥
T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Lever shouldn't have any deformation and
Safet
① when lever is pulled, all operation should
y
be stopped
lever
Rear view Rear view surveillance camera should be
Safety lever Rearviewcamera
② on at all times with no problems on
surveillance
monitor
Controller Controller, clutch and brakes should work
③
/ brake fine and seat belt needs to be attached

Hydraulic There shouldn't be any leakage, damage

④ device and abrasion on hydraulic motor, cylinder
Controller Hydraulic line
and and pipes

cylinder
Slewing
Fixing bolt of slewing device should not
⑤ device
have abnormalities like loosened part
(Turn

table)
Track or wheels (tire) should not have Turn table Travelling device
Track &
⑥ any problems such as cracks,
Wheel(Tire
deformation or damage
)
Do not add extra weights and connection
Counter
⑦ status of fixing bolts and nuts should be
weight
fine
Use standard bucket, safety pin should
⑧ Bucket Counter weight safety pin
be properly installed

Head, tail, fog, mars light should work

⑨ Lamps
normally

Side footboard , protection facility for

Other
⑩ driver's seat, safety bar for crash
safety Lamp Collisionavoidance
protection should be in good
device condition
Inspector's

opinion
 Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Pile Driver Safety Check List

Site: Subcontractor: Register No.: Inspection date:

①
⑨
②

③
⑥ ⑧
④ ⑤ ⑦
T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Over winding Before hook, hammer reach to highest
① proof point, operation should stop with
device alarm sounds
There should be no wire cut on wire rope
② Wire rope Over winding Wire rope
and end treatment should be good proof device
Height, perpendicularity, weight must be
Leader &
③ within instruction range and there
hammer
shouldn't have loosened bolt, deform
There shouldn't be any crack, damage
Leader Track
④ Track and deformation on tracks with adequate and
amount of tension hammer
Outrigger When moving, use steel plate to prevent
⑤ and ground from subsiding. Also use front
steel jack and outrigger
plate Outrigger,steelplate Generator
Connection status of generator should be
⑥ Generator good (welding and bolts) without active
part being exposed
It shouldn't be arbitrarily manipulated
Counter
⑦ and firmly fixed. The weight should comply
weight
with instruction
Reverse rotation prevention device and
Backlas Counter weight Backlash device
⑧ brakes should work properly without
h device
any problems
Assembly part and active part of main
Main
⑨ structure such as turntable and back
structure
stay
s
should not have any abnormalities Back stay
Othersafetydevice
Other
⑩ Install vertical life line to leader ladder
safety

Inspector's

opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Drill Machine Safety Check List

Site: Subcontractor: Register No.: Inspection date:

③
①

⑥
④
⑤
②

T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Height, perpendicularity, weight should
Leader
① comply with instructions. There shouldn't
and auger
be any loosened, deformation of bolts
Check damage or deformation of track Leader Track & steel
Track &
② and ground condition before moving. Use and plate
steel plate auger
steel plate when needed
There should be no wire cut on wire rope
③ Wire rope
and end treatment should be good
Hydraulic There shouldn't be problems like leakage,
④ device/ damage or worn-out on hydraulic motor, Wire rope Hydraulic
cylinder cylinder, pipe device/cylinder
Main structure, assemble and active part
Main
⑤ should not have deformation and damages
structure
and working properly

Brakes, clutch and driving device should Main structure Others

⑥ Others
function properly

Inspector's

opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Dump Truck Safety Check
List
Site: Subcontractor: Register No.: Inspection date:

② ⑦
③
④

⑥ ⑤ ①

T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Rear view surveillance camera should be
Rear
① on at all times with no problems on
view
monitor
camera

Controlle Controller, clutch and brakes should work Rearviewcamera Controller

②
r & brake fine and seat belt needs to be attached

Rear view Rear view mirror should be properly

③ mirror & attached and alarm device needs to work
alarm normally
Hydraulic There shouldn't be any leakage,
④ device & damage and abrasion on hydraulic motor, Alarm device Hydraulic device
cylinder cylinder
and pipes
Wheels (tire) should not have any
Wheel
⑤ problems such as cracks, deformation or
(tire)
damage

Head, tail, fog, mars light should work

⑥ Lamps Wheel (tire) Lamps
normally

Other Ladder of cargo box, footboard, box cover

⑦ safety and protection facilities for driver's seat
device should be fine

Automatic cover

Inspector's

opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Concrete Pump Car Safety Check List

Site: Subcontractor: Register No.: Inspection date:

①
②
⑦ ④
⑥
⑤
T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Controller Controller, clutch and brakes should work
①
& brake fine and seat belt needs to be attached
Rear view Rear view mirror should be properly
② mirror attached and alarm device needs to work
Controller rear alarm
& alarm normally
Hydraulic There shouldn't be problems like leakage,
③ device & damage or worn-out on hydraulic motor,
cylinder cylinder, pipe
Keep horizontal balance for maximum
④ Outrigger expansion and do not use more than Hydraulic device Outrigger
two batten
Wheel There shouldn't be any crack, deformation
⑤
(tire) and damage on wheels (tire)
Slewing
Fixing bolt of slewing device should have
⑥ device
abnormalities like loosened part Wheel (tire) Slewing device
(Turntable)
Main structure, assemble part, active part
Main
⑦ should not have any deformation and
structure
damages

Head, tail, fog, mars light should work

⑧ Lamps Boom Lights
normally

Setting Comply with high tension line, front

⑨
equipmen work and work area
t

Other
⑩ Side footboard should be installed well
safety
device

Inspector's

opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Motor Grader Safety Check
List
Site: Subcontractor: Register No.: Inspection date:

T
No. Part item Inspection method M T W F S S Inspection photo
h a u
Blade should not be arbitrarily
① Blade manipulated and not have deformation
and cracks
There shouldn't be cracks, deformation
Wheel Blade Wheel (tire)
② and damage of wheels and running
(Tire)
gear needs to be normal
Rear view Rear view surveillance cameras need to
③ surveillance be on at all times and a monitor should
camera operate without any problem

Controller Control, clutch, brakes should work Rear Controller

④ view
& Brakes properly with seat belts
camera
Rear view Rear view mirror needs to be
⑤ mirror & attached properly and alarm device
alarm should
function normally
rear view mirror Hydraulic cylinder
There shouldn't be problems like
Hydraulic
⑥ leakage, damage or worn-out on
device/cylinde
hydraulic motor, cylinder, pipe
r

Head, tail, fog, mars light should

⑦ Lamps
work normally

Other Protection facility for driver's seat

⑧
safety should be in good condition Lamps
device

Inspector's

opinion
 Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Loader Safety Check List

Site: Subcontractor: Register No.: Inspection date:

⑤
③
① ⑦ ④ ⑥
⑧

T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Use standardized bucket and connecting
① Bucket part and bucket itself should not have any
crack, deform and damage
Wheel (tire) should not have any cracks Bucket Wheel (tire)
Track,
② or deformation and has good
wheel
connection status
(tire)

Rear view Rear view surveillance camera needs to

③ surveillance be on at all times and monitor shouldn't
camera have any problems

Controlle Controller, clutch and brakes should work Rear Controller

④ view
r & brake fine and seat belt needs to be attached
camera
Rear view Rear view mirror needs to be attached
⑤ mirror & properly and alarm device should function
alarm normally
Hydraulic There shouldn't be problems like leakage, Hydraulic cylinder
Alarm device
⑥ device & damage or worn-out on hydraulic motor,
cylinder cylinder, pipe
Head, tail, fog, mars light should
⑦ Lamps
work normally
Extra weight should not be added and
Counter
⑧ connection status of fixing bolt & nut
weight Lamps Counter weight
should be firm
Other Side footboard, protection facilities for
⑨ safety driver's seat, safety bar for crash
device protection should be in safe condition

etc

Inspector's

opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Roller Safety Check List
Site: Subcontractor: Register No.: Inspection date:

④
④ ③① ④
② ⑤

T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Power is cut when button is pressed.
Emergency
① Button should be red and only
stop
manual reset type
button

Rear view Rear view surveillance camera should Emergency stop Rear view

② surveillance be on at all times with no problem button camera

camera on
monitor operation
Controller, clutch and brakes should
Controller
③ work properly and seat belt needs
, Brakes
to be attached
Rear mirror Rear view mirrors should be installed
Brakes Rear view mirror
④ & reverse properly and alarm needs to work
alarm normally
Hydraulic There shouldn't be problems like
⑤ device & leakage, damage or worn-out on
cylinder hydraulic motor, cylinder, pipe

Head, tail, fog, mars light should Lamps

Hydraulic pipe
⑥ Lamps
work normally

Inspector's

opinion

Construction
Inspector (signature) (signature) Safety manager (signature)
manager
 Air Compressor Safety Check
List
Site: Subcontractor: Register No.: Inspection date:

T
No. Part item Inspection method M T W F S Su Inspection photo
h a
Power is cut when button is pressed.
Emergency
① Button should be red and only
stop
manipulated by hand
button

It should be working properly without any Emergency stop Pressure gauge

Pressur
② damages, corrosion and button
e gauge
accurately indicates numbers
It needs to be well-fixed without heat and
③ Motor
any cracks

Fan without any damages. There

Coolin
④ shouldn't be any leakage on connecting Motor Cooler(Fan)
g
part of
device
cooler, pipe and flange
There shouldn't be any
⑤ inlet filter
contamination, damage, detachment
of a case
Safety Safety valve should work properly and
Inlet filter Safety valve
⑥ v/v pressure limit switch only needs to
Pressure work
s/w under designed pressure
Easy manipulation and emission with no
⑦ Drain valve
condensate water inside of tank

power unit Fixed condition should be good

⑧ engine
and pulley, v-belt
Drain valve Engine
Container exterior should work without any
⑨ Oil tank abnormalities. Lubrication oil shouldn't
have any contamination

⑩ Oil tank Break away

prevention wire
Inspector's

opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager