HawkEye Elite Alignment Systems

Greater profit and productivity through innovation

NOW AVAILABLE WITH
PUSH REPORTS
Hunter's latest productivity features!
PATENTED PATENTED
Revolutionary Superior
adaptor design! target design!
% Faster setups! % Lighter design!
% No metal-to-metal contact! % Narrower profile!
% No knob twisting! % Faster readings!
 EXCLUSIVE
Faster Caster!
Saves time, increases speed and
reduces battery drain from brake
light draw.

PATENTED
High-resolution cameras!
EXCLUSIVE
Four high-resolution cameras provide
QuickComp ! ™

alignment measurements with pinpoint

Compensate all accuracy.
wheels and capture initial
measurements in one STANDARD
motion.
Recall specs in a snap!
Recall OE specs and vehicle-specific
NEW alignment procedures instantly.*
HunterNet ™

PATENTED
connectivity!
Automatic push reports Patented Safety System
plus online business Alignment integration!
intelligence tools. Reset computerized steering systems
on a wide variety of vehicles with one
simple tool.
* Standard with WA600 consoles, optional with WA500 consoles.
QuickGrip wheel adaptors & three-dimensional targ
®

Hunter's patented QuickGrip adaptors and three-

®

dimensional targets accelerate service with set-up

times in seconds instead of minutes...

PATENTED
Extremely Fast
Installation
% Spring-loaded arms grip
the tire
% Thumb switch secures
the clamp
% Off-center clamping has
no effect on accuracy

PATENTED
Avoid Damage to
Expensive Rims
% Grips tire, not rim
% No metal-to-metal contact
% Only protective ring
contacts rim

PATENTED PATENTED
Less Weight Space-Efficient Profile
% Weighs only 6 lbs. % Approx. 9" profile
% Nearly 50% lighter than % Easy to work around
previous designs % Great for narrow bays
gets 2011
NORTH AMERICAN
AUTOMOTIVE TOOL AND EQUIPMENT
TECHNOLOGY INNOVATION AWARD 2011 2012

PATENTED
Quick-Change Arms

% Interchangeable arms cover

up to 37" assemblies
% One arm fits approximately 90% of applications

PATENTED
Deep-Wheel Extension

% Deep rims or protruding hubs, no problem

% Standard accessory

PATENTED

PATENTED
Wide-Angle Targets
Low Maintenance OPTIONAL
% Shop-tough polymer structure
withstands drops
% No electronics, cables or
calibration
% Only occasional cleaning
required % Perform max steer procedure, as needed
Previous setups used valuable shop time…
Conventional electronic-sensor system – 10-minute-plus procedure

% Chock wheels
and lift vehicle
1 4 10
% Jack up front and rear of vehicle
% Check air pressure and recall specs
% Mount all 4 sensors, compensate each
sensor, and remove pins
% Lower rear and front of vehicle
and jounce
ACTIVITY TRACKER
% Steer caster
% Print results 4
10:05 Total 6
246
Older technology requires long set-up times…

Camera-sensor systems speed up the process

% Chock wheels and lift vehicle

1 4 % 10pressure and recall specs
Check air
% Mount targets
% Roll backward, then forward to compensate
% Remove pins
% Steer caster ACTIVITY TRACKER

% Print results 3
4:00 Total
6
l83

Early camera technology improved efficiency…

…Today, present your results in just 70 seconds!

Hunter's HawkEye Elite and Premium ACTIVITY TRACKER

®

RX Lift capture all readings and produce l trip around the vehicle
measurements in 70 seconds! trips to the console
0
Hunter's 70-second procedure 72 total walking steps
% Chock wheels and raise lift to work height
% Mount targets and set air pressure
% Roll forward to compensate sensors
% Scan VIN to recall specs and perform Fast printouts
faster caster steer
in 70 seconds!
% Vehicle results print automatically
Use detailed printouts
1:10 Total featuring your company’s
logo to sell more work.
FIA streamlines the entire alignment process.
Communication links automate tasks once performed by the
technician manually, eliminating time-consuming trips around
the vehicle and to-and-from the console.

1 3

4
 PATENTED
1 RX Scissor Lift console
% Raising the vehicle triggers the sensors
to look for wheel targets
% Control PowerSlide and Inflation Station
®

settings on the lift console

% Store bar-code scanner and CodeLink AlignLights turn on
automatically at
tool near the vehicle to save steps alignment height

PATENTED
2 WinAlign console
®

% Centralized control of entire system

% Communicate directly with lift to set
tire pressure and automatically operate
turnplates and slipplates
Measurements are taken
% Guide the technician through the automatically once the
alignment process fourth target is installed

PATENTED
3 PowerSlide system®

% Slipplates and turnplates automatically

lock and unlock at appropriate times
% No more struggles with lock pins
Auto-locking turnplates
and slipplates save trips
around the vehicle

PATENTED
4 Inflation Station
% Automatically inflate all four tires
simultaneously
% Record starting and final pressure
% Hose recoils to keep work area clear
Software tracks before
and after tire pressures for
the customer's printout

Requires FIA lift. See RX or Four-Post lift brochures for details.

Hunter's Safety System Alignment :
Over 100 million vehicles require
Safety System Alignment… and growing!
Electronic
120

110

Stability 100

Control 90 Steering
80 Angle
% Since 2009, Hunter has Sensor
MILLIONS

70
supported electronic 60
steering system resets 50
as required by the OEM 40

% Several systems use 30

electronic steering

ESTIMATE

ESTIMATE
20

system output to 10

determine the vehicle's 0

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020
travel direction Source: Hunter Engineering Company research

A growing number of vehicles also require

additional resets
 dvanced Driver
A
LDW
Assistance Systems Surround
View Lane
Bllind
nd S
Spot
ot
De etectio
tionn Departure
% Many vehicles are now Rear Crross
C s
Warning FCW
Co
Collis
o lision
n Tra
affic ACC
equipped with ADAS Waarning
rn g Em
mergency
rgency
Alertt B
Braking
Su
urround
% Many systems require View Parkk Parrk
k Ped
desttrian Adaptive
Asssis
st Deetecttion Cruise
a calibration after Park As
ssist
sis
ist
st Control
Assist Co
ollision
wheel alignment Avo
voidance
dance
% Often require a short drive Trafffiic
Blind Spot
Spot Signnal
be completed as part of Deetect
ection
n Rec
Recognition
cognnition
Surround
the calibration View
Hunter's Safety System Alignment :
The last step in alignment service
An increasing number of vehicles include advanced driver assistance
systems (ADAS). In addition to a mechanical alignment, manufacturer’s
specifications often require a Safety System Alignment on many
®

vehicles equipped with ADAS Systems.

ADAS systems most likely to require reset

% Lane Departure Warning (LDW) - Camera-based
% Forward Collision Warning (FCW) - Radar-based
% Adaptive Cruise Control (ACC) - Radar-based

The only integrated, complete alignment procedure

CodeLink's patented
integration “links” the vehicle
OBD-II system to the aligner
to align safety system related sensors to the
vehicle’s alignment geometry.

CodeLink advantages:
®

% Integrated with Hunter Adaptive

WinAlign systems
®
Cruise
Control
% Simple instructions shown
on aligner screen Lane
Departure
% Only one tool required Warning

% Wireless communication
with aligner
% Resets ADAS systems and other
related sensors
% Alignment printouts document reset
Steering
Angle
Sensor

Vehicle
OBD-II
System
When it comes to award-winning software,
WinAlign is unmatched!
®

The importance of software…

> The most extensive vehicle

information database for North
America's 220 million vehicles.

> Vehicle-specific procedures

Over 30 years of experience and the largest
R&D department in the undercar industry guide your technicians with
bring you the most profitable and productive step-by-step instructions.
software on the market.
> P
 atented and award-
winning power tools
complete the work accurately
the first time, every time.

> W
 inAlign maximizes profit
and productivity in your
alignment bay.

Ordinary systems Ordinary camera WinAlign maximizes

simply present systems simply speed profit and productivity
alignment readings up these readings in your alignment bay

NEW
New Faster Caster WAIT
procedure!
% Eliminates wait times during WAIT
WAIT
caster steer
WAIT
% Saves time and increases speed
% Reduces brake pedal depressor
installation by 86%
% Reduces battery drain from No more waiting for left, right, Steer left, right and back
brake light draw and center readings during center
caster steer
 ExpressAlign WinToe
® ®

Perform every alignment with a streamlined Ensure a straight steering wheel every time
procedure. ExpressAlign analyzes each job without repeated adjustments or using a steering
and presents the optimal action sequence with wheel holder.
the minimum steps required. A timesaver on nearly every alignment

Tools and Kits Database Virtual View ®

Save trips back and forth to the tool box. Hunter See your alignment job in 3-D using real-time
presents all of the tools and aftermarket correction 3-D graphics. Used by experts and novices alike.
kits needed for each alignment. Every alignment can be shown in 3-D
Online ordering supported

Control Arm Movement Monitor Wheel-Off Adjustment

®

Cut adjustment times in half for front-shim, dual- Speed the alignment process by making
cam or dual-slot vehicles. Step-by-step graphics adjustments with the wheel removed.*
let you get it right on the first try. Available when you need it
Over 60 million vehicles benefit

* For three-dimensional targets, both Wheel-Off Adjustment Kit and SCA Adaptor Kit 20-2664-1 is required.
Take your alignment business to the next level!
Perform body shop and specialty
alignments…

PATENTED

Shim-Select II ®

PATENTED Eliminate confusing shim charts and tables. Shim Select

II quickly calculates and displays the template you need
Suspension Body Dimension Audit for proper shim installation.
Quickly screen vehicles to determine alignability and Over 30 million vehicles benefit
collision repair needs.

PATENTED

Automatic Bushing Calculator ®

Symmetry Angle Measurements Calculate the proper bushing size and position
Instantly access symmetry angles and setback for your adjustment without wasting time with a zero bushing.
body shop customers. Over 10 million light trucks and vans benefit

PATENTED PATENTED

Live Ride Height Adjustment WinAlign Video Library

®

Measure and adjust ride height in real-time. 400+ videos and animations cover all aspects of wheel
Over 20 million vehicles require ride height alignment today.
measurement to complete alignment service
Help your customers make informed decisions!
WinAlign printouts help sell work
®

Explain needed parts and repairs and show completed

work to customers using detailed,
color-coded printouts.
Clear and detailed printouts help you
communicate and build rapport with your
customers and sell more alignments

Push Reports
% Automatic performance snapshots delivered daily
via email or text
% Easy-to-understand report measures output and
achievements
% Track alignment conversions, balancing utilization
and inspection opportunities

Your online business intelligence tool

HunterNet allows shops to obtain real-time data
™

through connected equipment results, trends and

management reports.
% Easily track alignment activity and generate reports
% Cloud storage eliminates multiple paper printouts
% Email Quick Check and alignment results, photos
®

and videos to customers

% Access the latest alignment specifications and
adjustment info online with WebSpecs
®

HunterNet conectivity empowers you to

™

make data-driven decision to increase your

productivity and profitability
Use your aligner to perform Quick Checks!

1 4

Use detailed printouts

featuring your company’s logo
to sell more work

% T otal toe front and rear

% Camber on all wheels
% Tire wear indication
% Identifies vehicles that require
Safety System Alignment

OPTIONAL

20-2813-1 CodeLink* 20-2781-3 Battery Health*

Retrieves emission codes. Wirelessly transfers Tests battery to OEM specs. Sends results to console
important vehicle information to console. wirelessly in 10 seconds.

OPTIONAL OPTIONAL

20-2782-1 Tire Tread Depth* Quick Tread ®

Quick and easy tire wear check. Conditions Creates a 3D model of the tire and can be easily
transmitted to console automatically. added to existing Quick Check inspection systems.
®

*Requires WinAlign 14.1 software or higher in Quick Check mode.

® ®
Choose the right alignment console for your shop!
WinAlign WA600
Premium consoles
Processor 3.60 GHz Intel Core i3 (or greater)
® ™

Memory 4 GB of DDR4 RAM

Hard drive 240 GB Solid State Drive (or greater)

DVD-RW/CD-RW combo drive Standard

Industry-leading hardware

24" or 27" widescreen LCD

Monitor class
(32" available on large console)

Wired & wireless network module Standard

Operating system Windows 10 IoT Enterprise

Three-dimensional target (TD Target ) support Standard

™

Large console with drawers Standard (with WA68X consoles) Large console

Compact console with printer drawer Standard (with WA67X consoles)

Console-top storage and charging station Standard (with mobile WA600 consoles)

Bar Code Reader Standard

PATENTED Award-winning WinAlign software Standard

®

PATENTED Vehicle Info Database (30+ yrs) Standard (2 years free updates)

PATENTED Real-time specs delivered by web WebSpecs (2 years standard)

®
Award-winning productivity tools

PATENTED Steering system reset (integrated) Yes (with standard CodeLink ) ®

Quick Check Standard

Compact console
PATENTED Live Ride Height adjustment Standard

PATENTED Fully Integrated Alignment Yes (FIA-equipped lift required)

PATENTED Vehicle inspection with photos Standard

PATENTED Tools & Kits Videos and Photos

Equipment video help/assistance Standard

PATENTED ShopResults (via ShopResults.NET ) 2 years standard

®

PATENTED Training and productivity aids

4,000+ photos, 1,600+ illustrations Wall-mount console
400+ videos & animations

Remote Indicator sold separately. For product dimensions, weights and site requirements, please contact your local Hunter Sales Representative.
Choose the right sensor package for your shop!

PATENTED

PATENTED EXCLUSIVE

Fixed-column configurations fit most service bay Motorized and manual movable-camera configurations
applications. provide a full range of vertical travel for additional
lift height.

PATENTED PATENTED

Cabinet-mounted configuration is mobile to service Wall- and ceiling-mount configurations are perfect when
multiple alignment bays and provides a full range of space is at a premium.
travel for additional lift height.

PATENTED

EXCLUSIVE OPTIONAL

Floor-mounted overhead configurations are ideal One set of adjustable clamp arms covers the same
for drive-through bays or to accommodate unique clamping range as standard multi-arm kit.
applications.
 HawkEye Elite alignment sensor and adaptor ®

specifications
PATENTED No metal-to-metal contact with wheel Standard
Weight of assembly 6 lbs.
Profile of assembly 9 inches
Installation time per wheel 5 seconds
Specifications

Rolling compensation style Forward

2,608 x 1,952 (pixels per camera)

Camera resolution
20,000,000 (pixels total)

Track width 80 inches

Wheelbase 210 inches
Distance to wall* 66 - 107 inches
Suggested distance* 99 inches
Short-bay distance (see site info)* 66 inches

S.A.I. and included angle %

Setback %
Secondary Measurements

Maximum steering angle** To lock

PATENTED Live ride height*** %
Wheelbase difference %
Track width difference %
Tread width difference %
Lateral offset %
Rear setback %
Axle offset %
PATENTED SBDA %
Measurements

PATENTED Body angle %

Body

PATENTED Body wheel offset & setback %

PATENTED Body roll** %

PATENTED Way Up Way Out WinToe** %

Adjustments

PATENTED Wheel-Off Adjustment Optional

* Refer to site requirements for exact bay specifications. ** Requires optional wide-angle target extensions.
*** Requires Ride Height targets. Standard with WA600 consoles, optional with WA500 consoles.
Increase revenue with Hunter merchandising!
Introduce your wheel alignment
capabilities and educate your
customers with great Point-of-Sale
options from Hunter.

Sell more STANDARD

alignments Customized
with clear and column cap
informative Make your
printouts alignment bay stand
out. Hunter's lighted
sensor column cap
can be customized with
your logo or shop name.
(available for most sensor
configurations)

Be sure to check out other Hunter literature for more quality

products from Hunter Engineering.

0320WHE
Form 6230-T, 03/20
Copyright © 2020, Hunter Engineering Company Supersedes form 6230-T, 03/19