Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Pushbutton Units and Indicator Lights: Sirius 3Sb3

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Pushbutton Units and Indicator Lights

SIRIUS 3SB3
Dimension drawings
Lampholders
(mm)
withAccessories
separate lamp
andtest
enclosures
function

Typical circuits
3SB14 00–2N or 3SB34 00–1F lampholder 3SB14 00–2P or 3SB34 00–1G lampholder
incl. 130 V incandescent lamp for incandescent lamps up to 2.6 W or AC/DC LED lamps

3SB14 00–2Q or 3SB34 00–1H lampholder 3SB34 00–1L lampholder


for incandescent lamp to 2.6 W or for incandescent lamp up to 2.6 W or
AC neon bulbs or AC/DC LED lamps DC LED lamps

Typical lamp test circuit with Application examples for Notes on using the lamphold-
with 3SB14 00–3X or 3SB34 00–1N
3SB14 00–3X and 3SB34 00– ers with separate lamp test
1N diode elements function
• Lamp test circuit, When connected in parallel with
• Interference suppression, inductive loads (e.g. contac-
• Limiting voltage peaks, tors), surge suppression re-
• Limiting DC coils, quired.
• Diode gates,
• Rectifier circuits. The 3SB14 00–2Q and
3SB34 00–1H elements are not
The diode element contains two suitable for use with a parallel
1N 4007 diodes. The element load.
can be snapped onto the gear
holder as required.

Example of a typical push to test circuit using a standard, illuminated push-


button transformer type with 1 NO + 1 NC contact. e.g. Illuminated Pilot
Light components require to make-up a 120 V red raised push to test trans-
former type use (1) each of the following components:
• 3SB3 001-0BA21 • 52AABN • 3SB3 400-0B
• 3SB3 400-1A • 3SB3 400-3M • 3SB3 400-0C

Siemens Industry, Inc. 10/95


Industrial Controls Catalog

You might also like