Bid Number/बोली मांक ( बड सं या) :

GEM/2024/B/4843170
Dated/ दनांक : 19-04-2024

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 13-05-2024 11:00:00

Bid Opening Date/Time/ बड खुलने क

13-05-2024 11:30:00
तार ख/समय

Bid Offer Validity (From End Date)/ बड पेशकश

90 (Days)
वैधता (बंद होने क तार ख से)

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Railways

Department Name/ वभाग का नाम Indian Railways

Organisation Name/संगठन का नाम East Central Railway

Office Name/कायालय का नाम Ecr Stores

Total Quantity/कुल मा ा 10400

Item Category/मद केटे गर 1100V Grade L. T. Aerial Bunched cable (Q3)

MSE Exemption for Years Of

Experience/अनुभव के वष से एमएसई छूट/ and Yes
Turnover/टनओवर के िलए एमएसई को छूट ा है

Startup Exemption for Years Of

Experience/अनुभव के वष से टाटअप छूट/ and Yes
Turnover/ टनओवर के िलए टाटअप को छूट ा है

Past Performance,Certificate (Requested in ATC),Additional

Doc 1 (Requested in ATC),Additional Doc 2 (Requested in
ATC),Additional Doc 3 (Requested in ATC),Additional Doc 4
Document required from seller/ व े ता से मांगे (Requested in ATC),Compliance of BoQ specification and
supporting document
गए द तावेज़ *In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Past Performance/ वगत दशन 80 %

Bid to RA enabled/ बड से रवस नीलामी स य कया No

Type of Bid/ बड का कार Two Packet Bid

Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 2 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय

1/7
 Bid Details/ बड ववरण

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- Yes
registered with GeM)

Inspection to be carried out by Buyers own

Yes
empanelled agency

Type Of Inspection Pre Dispatch

Name of the Empanelled Inspection

RITES
Agency/ Authority

Estimated Bid Value/अनुमािनत बड मू य 6786520

Evaluation Method/मू यांकन प ित Total value wise evaluation

EMD Detail/ईएमड ववरण

Advisory Bank/एडवाईजर बक State Bank of India

EMD Amount/ईएमड रािश 135731

ePBG Detail/ईपीबीजी ववरण

Advisory Bank/एडवाइजर बक State Bank of India

ePBG Percentage(%)/ईपीबीजी ितशत (%) 5.00

Duration of ePBG required (Months)/ईपीबीजी क

40
अपे त अविध (मह ने).

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this
Policy./जेम क शत के अनुसार ईएमड छूट के इ छुक बडर को संबंिधत केटे गर के िलए बड के साथ वैध समिथत द तावेज़ तुत करने है ।
एमएसई केटे गर के अंतगत केवल व तुओं के िलए विनमाता तथा सेवाओं के िलए सेवा दाता ईएमड से छूट के पा ह। यापा रय को इस नीित के
दायरे से बाहर रखा गया है ।

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।

Beneficiary/लाभाथ :
FA&CAO/ECR/HAJIPUR
ECR STORES, Hajipur, East Central Railway, Ministry of Railways
(Fa Cao)

Splitting/ वभाजन

Bid splitting not applied/बोली वभाजन लागू नह ं कया गया.

2/7
MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता Yes

MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. If the bidder is a Startup, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and
"Experience Criteria" subject to their meeting of quality and technical specifications. If the bidder is OEM of the
offered products, it would be exempted from the "OEM Average Turnover" criteria also subject to meeting of
quality and technical specifications. In case any bidder is seeking exemption from Turnover / Experience Criteria,
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer.
3. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.

4. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%
(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be
given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of
total QUANTITY.The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.
5. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
6. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 80% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid

3/7
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.
7. Inspection of Stores by Nominated Inspection Authority / Agency of buyer or their
authorized representatives

An independent third party Professional Inspection Body can help buyer in mitigating buyer’s risk with pre-
dispatch/post-dispatch inspection in order to ensure that equipment, components, solutions and documentation
conform to contractual requirements. The buyer has a right to inspect goods in reasonable manner and within
reasonable time at any reasonable place as indicated in contract. Inspection Fee/ Charges (as pre-greed between
buyer and Inspection Agency) would be borne by the buyer as per their internal arrangement but may be
recovered from the seller if the consignment failed to conform to contractual specification and got rejected by
the Inspection Officer .If so requested and accepted by the seller , initially seller may pay for inspection
charges as applicable and get the same reimbursed from buyer if consignment accepted by the Inspecting
Officer . For reimbursement seller has to submit proof of payment to Inspection Agency.

Seller/OEM shall send a notice in writing / e-mail to the Inspecting officer / inspection agency specifying the place
of inspection as per contract and the Inspecting officer shall on receipt of such notice notify to the seller the date
and time when the stores would be inspected. The seller shall, at his own expenses, afford to the Inspecting
officer, all reasonable facilities as may be necessary for satisfying himself that the stores are being and or have
been manufactured in accordance with the technical particulars governing the supply. The decision of the
purchaser representative /inspection authority regarding acceptance / rejection of consignment shall be final and
binding on the seller.

The Seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind which
the Inspecting officer may demand of him for any test, and examination, other than special or independent test,
which he shall require to be made on the seller's premises and the seller shall bear and pay all costs attendant
thereon.

The seller shall also provide and deliver store / sample from consignment under inspection free of charge at any
such place other than his premises as the Inspecting officer may specify for acceptance tests for which
seller/OEM does not have the facilities or for special/ independent tests.

In the event of rejection of stores or any part thereof by the Inspecting officer basis testing outside owing to lack
of test facility at sellers premises, the seller shall, on demand, pay to the buyer the costs incurred in the
inspection and/or test. Cost of test shall be assessed at the rate charged by the Laboratory to private persons for
similar work.

Inspector shall have the right to put all the stores or materials forming part of the same or any part thereof to
such tests as he may like fit and proper as per QAP/governing specification. The seller shall not be entitled to
object on any ground whatsoever to the method of testing adopted by the Inspecting officer.

Unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will be
borne by seller.

Inspecting officer is the Final Authority to Certify Performance / accept the consignment. The Inspecting
officer’s decision as regards the rejection shall be final and binding on the seller.

The seller shall if so required at his own expense shall mark or permit the Inspecting officer to mark all the
approved stores with a recognised Government or purchaser's mark.

1100V Grade L. T. Aerial Bunched Cable ( 10400 pieces )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Buyer Specification
Download
Document/ े ता विश द तावेज़

4/7
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

232101,Office of
Sr.DEE/G/MGS,
1 Ras Bihari Yadav SSE/Electrical/Power House, 10400 90
Mughalsarai, U.P.- 232101,
Mobile-9794848869

Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत

1. Inspection

Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following
Inspection Agency would be conducting inspection of stores before acceptance:
Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been
selected in ATC):

RITES

Post Receipt Inspection at consignee site before acceptance of stores:

CONSIGNEE

2. Forms of EMD and PBG

Bidders can also submit the EMD with Fixed Deposit Receipt made out or pledged in the name of A/C
(Name of the Buyer). The bank should certify on it that the deposit can be withdrawn only on the demand
or with the sanction of the pledgee. For release of EMD, the FDR will be released in the favour of the
bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped along
with covering letter. Bidder has to upload scanned copy/ proof of the FDR along with bid and has to ensure
delivery of hardcopy to the Buyer within 5 days of Bid End date/ Bid Opening date

3. Certificates

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.

4. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

5. Purchase Preference (Centre)

Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated
23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent
Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference,

5/7
 the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary
evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If
L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchase
preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1
price and contract will be awarded for percentage of 25% of total value.

6. Scope of Supply

Scope of supply (Bid price to include all cost components) : Only supply of Goods

7. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Fixed Deposit Receipt also (besides
PBG which is allowed as per GeM GTC). FDR should be made out or pledged in the name of

FA&CAO/ECR/HAJIPUR
A/C (Name of the Seller). The bank should certify on it that the deposit can be withdrawn only on the
demand or with the sanction of the pledgee. For release of Security Deposit, the FDR will be released in
favour of bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped
along with covering letter. Successful Bidder has to upload scanned copy of the FDR document in place of
PBG and has to ensure delivery of hard copy of Original FDR to the Buyer within 15 days of award of
contract.

8. Generic

Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only.

9. Generic

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the
screenshot of GST portal confirming payment of GST.

10. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

1.Bid of original manufacture(OEM) or their authorized dealer/agents only shall be considered for ordering.
Dealers/Agents should submit valid tender specific authorization from OEM along with bid or OEM should s
ubmit their self declaration with brand. Otherwise offer will be summarily rejected.

2.Availability of type test report from Govt Lab/ NABL accredited LAB / ILAC accredited LAB is to be require
d. Otherwise offer will be rejected.

Disclaimer/अ वीकरण

The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-

1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any

6/7
 Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.

Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.

This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action

in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।

---Thank You/ ध यवाद---

7/7