Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Amendment No.4 April 2007 TO Is 1785 (Part 1) : 1983 Specification For Plain Hard-Drawn Steel Wire For Prestressed Concrete

    Uploaded by

    OMEGA CONSULTANT

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Amendment No.4 April 2007 TO Is 1785 (Part 1) : 1983 Specification For Plain Hard-Drawn Steel Wire For Prestressed Concrete

    Uploaded by

    OMEGA CONSULTANT
    8 views2 pages

    Original Title

    1785_1A4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views2 pages

    Amendment No.4 April 2007 TO Is 1785 (Part 1) : 1983 Specification For Plain Hard-Drawn Steel Wire For Prestressed Concrete

    Uploaded by

    OMEGA CONSULTANT

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Free Standard provided by BIS via BSB Edge Private Limited to omega chemical lab -

    kolkata(omegachemicallab65@gmail.com) 113.21.78.215 [for non-commercial use only].

    AMENDMENT NO.4 APRIL 2007


    TO
    IS 1785 (PART 1) : 1983 SPECIFICATION FOR
    PLAIN HARD-DRAWN STEEL WIRE FOR
    PRESTRESSED CONCRETE

    PART 1 COLD DRAWN STRESS-RELIEVED WIRE

    ( Second Rnision )

    [Page 5, clause 5.1 (see also Amendment No.3)] - Insert the following
    values of Nominal Diameters and its corresponding values of Tolerances:

    Nominal Diameter Tolerance


    nun mm
    3.00 ±0.04
    2.50 ±O.O25

    [Page 5, clause 5.1.2 (see also Amendments No.2 and 3)] - Insert the
    following values of Nominal Diameter and its corresponding values of Nominal
    Mass and Tolerance in the existing clause:

    Nominal Diameter NominalMass Tolerance


    mm g1m g/m
    3.00 55.5 :1:1.5
    2.50 38.5 ±1.25

    [Page 6, clause 6.1 (see also Amelld~ent No.3)] - Insert the following
    values of Nominal Diameter and its cOITesPQnding values of Tensile Strength in
    theexisting clause:

    Nominal Diameter Tensile Stren~th, Min


    mm N/nun
    2.50 2010
    3.00 1865

    [Page 6: clause 6.4 (see also Amendment No.3)] - Insert the following
    values of Nominal Diameter and its corresponding values of Elongation, Percent
    in the existing clause:
    Free Standard provided by BIS via BSB Edge Private Limited to omega chemical lab -
    kolkata(omegachemicallab65@gmail.com) 113.21.78.215 [for non-commercial use only].

    Amend No.4 to IS 178S (Part 1) : 1983

    Nominal Diameter Elongation, Percent


    nun Min
    2.50 2.5
    3.00 2.S

    [Page 8, clause 7.5 (see also Amendment No.3)] - Insert the following
    values of Diameter of Wire and its corresponding values of Radius of Jaws in
    Table 1 underthe existing clause:

    Diameter of Wire Radius ofJaws


    mm mrn
    2.50 7.50
    3.00 10.00

    (CED 54)

    Repro....phy Unit,BIS,NewDelhi, India

    You might also like