Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 350 views

    NUX AmpAcademy FirmwareUpdateGuide

    Uploaded by

    Shane MuZzo Henry

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    NUX AmpAcademy FirmwareUpdateGuide

    Uploaded by

    Shane MuZzo Henry
    350 views4 pages

    Original Title

    NUX_AmpAcademy_FirmwareUpdateGuide

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    350 views4 pages

    NUX AmpAcademy FirmwareUpdateGuide

    Uploaded by

    Shane MuZzo Henry

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    NUX Amp Academy Firmware Update Guide

    Recipe:
    NUX Amp Academy
    Computer, runing on Windows 7 or above or Mac OS.
    USB-C data/sync cable
    A few paticence 1

    Q&A:

    1. What is the “NUX Device Updater”?

    It's an utility software that can get various NUX effect pedals' firmware
    updated, it's green and safe to run on your computer.

    2. What does "DFU"and “DFU mode” stands for?

    In our case, "DFU" is short for Device Firmware Update, and you have to put
    your NUX pedal into DFU mode before the "NUX Device Updater" can detect
    and connect to it without getting "No Device Found" error.

    3. How to put the NUX Amp Academy into DFU mode?

    Keep holding down both foot-switches and plug in your power supply (DC 9
    Volt, Negative Center), release both foot-switches until you notice that the
    SCENE indictor starts to blink.

    4. Is it necessary to get the firmware updated？

    It is necessary when you want to explore the new features that comes with the
    new firmware, and if you need to tweak the NUX Amp Academy with its editor
    software.
    Step by step Guide:
    1. Download the firmware update kit & Install the NUX Device Updater.

    1.1 Download the firmware update kit from the NUX Amp Academy product
    page.

    1.2 Unzip the downloaded file to a directory of your choice.

    1.3 Install the NUX Device Updater. 2

    2. Put the NUX Amp Academy into DFU mode and connect it to your
    computer.

    2.1 Connect your NUX Amp Academy to your Mac or PC using a quality
    sync/data USB-C cable.

    2.2 Run "NUX Device Updater", you will see the following interface:

    2.3 Put your NUX Amp Academy into DFU mode and you should notice "No device
    found" turned into "Device connected"
    3. Select the new firmware file(.bin) & start upgrading the firmware.

    3.1 Select the new firmware file(the binary file with '.bin' extension).

    WARNING:

    Please make sure the selected firmware is actual for the NUX Amp
    Academy. Otherwise, you may brick your pedal or cause it to
    malfunction.
    Do NOT unplug anything during the upgrading process.

    3.2 Click "Start Update" to start upgrading the firmware. It takes roughly 3-5 minutes
    to finish, both A indicator and B indicator stay blinking throughout the process of
    upgrading.

    3.3 Once the firmware is successfully upgraded, the following alert window should
    pop out notifying you that the upgrade is done. Meanwhile, all three indicators on
    your Amp Academy starts to blink.
    4. Finish Updating.

    4.1 Close the "NUX Device Updater"

    4.2 Unplug the power supply and the USB-C cable from the pedal.

    4.3 Grab your guitar/bass and try out the new features and tons.

    1. If you have any further problems, please email us @ info@cherubtechnology.com or usa@cherubtechnology.com. ↩

    2. The latest version(V2.1.12.10) by far requires installation. ↩

    You might also like