FTR-LY SERIES

POWER RELAY
1 POLE - 6A (Medium Load Control)
SLIM TYPE
FTR-LY Series RoHS compliant

n FEATURES
l Slim(15.0mm(h) x 5.0 mm(w) x 28.0mm (l)
l Mounting space: 140mm2, weight: 5.0g
l High insulation in small package (between coil and contacts)
- Insulation Distance: 8mm min.)
- Dielectric strength: 4,000 VAC
- Surge strength: 6,000V
l Plastic materials
- UL94 flame class V-0
- CTI>250 (UL CTI level class 2)
l UL, CSA, VDE, SEMKO under approval
- UL: conforms to UL508, 1604
- CSA: conforms to CSA22.2 No.14
- SEMKO: conforms to EN61058-1, 61095
- VDE: conforms to VDE 0435, 0631, 0700
l Contains no lead and features cadmium-free contacts
l Socket type available
l RoHS Compliant since production

n ORDERING INFORMATION
FTR-LY A A 005 Y SK
[Example] (a) (b) (c) (d) (e) (f)

(a) Series Name FTR-LY : FTR-LY Series

(b) Contact Arrangement A : 1 form A P: 1 form A (Right Angle Type)
C : 1 form C R: 1 form C (Right Angle Type)
(c) Coil Type / Enclosure A : Standard / Plastic sealed
(d) Nominal Voltage 005 : 5 VDC, 006 : 6VDC,
012 : 12VDC, 024 : 24VDC, 048 : 48VDC

(e) Contact Material Y : Silver alloy

V : Gold plated silver alloy
(f) Socket Type NIL : PCB mounting type
SK : Socket mounting type (contact arrangement A&C only)
Actual marking does not carry the type name : "FTR" and "SK"
E.g.: Ordering code: FTR-LYAA012Y Actual marking: LYAA012Y


 FTR-LY SERIES

n SPECIFICATIONS

It em FTR-LY
Contact Arrangemen t 1 form C 1 form A
Material Gold plated silver alloy, silver alloy
Style Singl e
Resistance (initial) Maximum 100m ohm s
Rating 6A 250VAC or 6A 30VD C
Maximum Carrying Current 6A
Maximum Switching Power 1,500VA
Maximum Switching Voltage 250VAC
Minimum Switching Load* 1
10mA 5VDC
Maximum Switching Current 6A
Coil Operating Temperature -40° C to +85° C (no frost )
Rating Power 170m W
Must operate power 75mW
Max. allowable voltage 150% of nominal voltage (at 20 deg.)
Time Value Operate Time (without diode) Maximum 8m s (at nominal voltage, no bounce)
Release Time (without diode) Maximum 4m s (at nominal voltage, no bounce)
Insulation Resistance (at 500VDC ) Minimum 1,000 Mohm s
Between open
1,000 VAC 1 minute
Dielectric contacts
Strength Between coil and
4,000 VAC 1 minute
contacts
Surge Strength 6,000V (at 1.2 x 50 micro sec. )
Life Mechanical 10 x 106 operations minimum
60 x103 ops. min. (N.O.)
Electrical AC contact ratin g 30 x103 ops. min. (N.C.)
at 6A 250VAC/30VDC
Other Misoperation 10 to 55 Hz, at double amplitude of 1.0mm
Vibration
Resistance Endurance 10-55 Hz, at double amplitude of 1.5m m

Shock Misoperation Min. 50m/s2 (11±1ms) Min. 100m/ s2 (11±1ms)

Resistance Endurance Min. 1,000m/ s2 (6±1ms)
Weight Approximately 4 g


 FTR-LY SERIES

n COIL DATA CHART

Mo d el Co i l Mu s t Mu s t
No m i n al Operate No m i n al
Res i s t an c e Release
Vo l t ag e Vo l t ag e P o w er
1 form A type 1 form C typ e (± 10%) Vo l t ag e
FTR-LYAA005Y(-SK) FTR-LYCA005Y(-SK ) 5VD C 14 7 Ω 3.3VDC 0.25VD C 170m W
FTR-LYAA006Y(-SK) FTR-LYCA006Y(-SK ) 6VD C 21 2 Ω 4.0VDC 0.3VD C 170m W
FTR-LYAA012Y(-SK) FTR-LYCA012Y(-SK ) 12VD C 84 7 Ω 8.0VDC 0.6VD C 170m W
FTR-LYAA024Y(-SK) FTR-LYCA024Y(-SK ) 24VD C 3,38 8 Ω 15.9VDC 1.2VD C 170m W
FTR-LYAA048Y(-SK) FTR-LYCA048Y(-SK ) 48VD C 10,60 0 Ω 31.7VDC 2.4VD C 217m W
FTR-LYPA005Y FTR-LYRA005 Y 5VD C 14 7 Ω 3.3VDC 0.25VD C 170m W
FTR-LYPA006Y FTR-LYRA006 Y 6VD C 21 2 Ω 4.0VDC 0.3VD C 170m W
FTR-LYPA012Y FTR-LYRA012 Y 12VD C 84 7 Ω 8.0VDC 0.6VD C 170m W
FTR-LYPA024Y FTR-LYRA024 Y 24VD C 3,38 8 Ω 15.9VDC 1.2VD C 170m W
FTR-LYPA048Y FTR-LYRA048 Y 48VD C 10,60 0 Ω 31.7VDC 2.4VD C 217m W

Note: All values in the table are measured at 20˚C.

n DIMENSIONS
Thru hole type
15 max.
0.5

3.5

0.5 1 1
(0.7) 0.5 1 Pre-soldering
3.78 5.04 5.04 (1.2)
16.38 5 max.
28 max.

Drilling Plan (BOTTOM VIEW)

Wiring Diagram (BOTTOM VIEW)

2-O1±0.1 3-O1.3±0.1
(*1)
(4.9)

(0.7)
(1.2)

5.04±0.1 5.04±0.1
3.78±0.1 16.38±0.1
(27.8)

*1: This terminal is not applicable for 1 form A type Unit: mm


 FTR-LY SERIES

n DIMENSIONS
Right Angle type

15.5
15 max.
3

Pre-soldering
0.5 1 1
(0.7) 0.5 1
3.78 5.04 5.04
16.38±0.1
28 max.

Drilling Plan
(Bottom view)

(X 1)

Wiring Diagram
(Bottom view)
2-O1±0.1 3-O1.3±0.1
(4.9)

(X 1)

(0.7)
(1.2)

5.04±0.1 5.04±0.1

3.78±0.1 16.38±0.1
(27.8)

(X 1): this terminal is not applicable for 1 form A type

Unit: mm


 FTR-LY SERIES

n DIMENSIONS
Socket type

Coil Voltage Type Name 2-R0.3 2-R0.7

3
(example) (example)

0.4
2
F&T LYCA024V

1.2
24V DC
2-R0.8

15 max.

6.3 max.
0320 60
û
0.5

0.7
0.5 1 1 3.5
(0.7) 0.5 1

Date Code Country Name

(example)

Schematics (BOTTOM VIEW)

PC Board Mounting Hole Layout (BOTTOM VIEW)

2O1±0.1 3O1.3±0.1
(4.9)
(1.2)

(0.7) 5.04±0.1 5.04±0.1

3.7±0.1 16.38±0.1
(27.8)
(30.6)
Unit: mm
Notes: 1. Socket ordering code
2. Standard IC socket is not recommended. Please use JM-6N


 FTR-LY SERIES

RoHS Compliance and Lead Free Relay Information

1. General Information
l Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)

2. Recommended Lead Free Solder Profile

l Recommended solder paste Sn-3.0Ag-0.5Cu.

Reflow Solder condtion

Flow Solder condtion:

Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C soler bath

Solder by Soldering Iron:

Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.

We highly recommend that you confirm your actual solder conditions

3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical realys.

4. Tin Whisker
l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.


 FTR-LY SERIES

Fujitsu Components International Headquarter Offices

Japan Europe
Fujitsu Component Limited Fujitsu Components Europe B.V.
Gotanda-Chuo Building Diamantlaan 25
3-5, Higashigotanda 2-chome, Shinagawa-ku 2132 WV Hoofddorp
Tokyo 141, Japan Netherlands
Tel: (81-3) 5449-7010 Tel: (31-23) 5560910
Fax: (81-3) 5449-2626 Fax: (31-23) 5560950
Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com
Web: www.fcl.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/

North and South America Asia Pacific

Fujitsu Components America, Inc. Fujitsu Components Asia Ltd.
250 E. Caribbean Drive 102E Pasir Panjang Road
Sunnyvale, CA 94089 U.S.A. #04-01 Citilink Warehouse Complex
Tel: (1-408) 745-4900 Singapore 118529
Fax: (1-408) 745-4970 Tel: (65) 6375-8560
Email: marcom@fcai.fujitsu.com Fax: (65) 6273-3021
Web: http://www.fujitsu.com/us/services/edevices/components/ Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/

©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products
Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 02/08/2006.