Sap SD Hana

SAP S4 HANA SD
Batch Determination Configuration For Sales and Distribution With AT Control In SAP Cloud
****** ******
Batch
Mickael determination
QUESNOT configuration
© SAP CLOUD for Sales
PUBLIC EDITION and distribution with ATP
control in SAP Cloud
1 Introduction
During production processes, product quality can vary based on several distinctive characteristics e.g., semi-
finished material quality, machine efficiency, quality control at a particular process step etc. To differentiate
mentioned finished product quality in SAP we can use batches. There is a possibility that the feeling of what is
acceptable quality can vary from customer to customer. Also, it is very important to sell products based on
sorting strategy – the most common used strategies are FIFO (First In First Out) and LIFO (Last In First Out).
Their use varies by different industry branches. The other part is to handle ATP (Available To Promise) control
during batch determination, to avoid creating deliveries with batches already planned to sell.
The main goals to achieve were:

1. Set-up characteristics, which were measured by a quality technician.
2. Create a batch class, to store material quality information
3. Set-up batch search strategies and sorting sequence (FIFO)
4. Perform batch determination during DELIVERY CREATION
1.1 Create custom characteristics
In Manage Characteristics apps, create characteristic which meet your needs. For our case, we have additionally
created two technical characteristics that will store as follows:
1. Z_ASSIGNED → to store if batch is assigned to a dedicated customer

2. Z_NOTICE_FR → to store if the notice is in French or not
2 Creating, Changing, and Displaying Characteristics
Procedure
To create a characteristic:
Mickaël QUESNOT © - Copyright
https://www.linkedin.com/in/mickaelquesnot/
1
Mickael QUESNOT © SAP CLOUD PUBLIC EDITION
1. choose Manage Characteristics.
2. Enter your data on the initial screen:
2
▪ In the Characteristic field, enter a name for your new characteristic. Use the Naming Conventions for
characteristic names.
▪ Enter a change number if you want to create the characteristic using engineering change management.
3
▪ To do this, choose processing type Create characteristic .
4
▪ You can also copy the data of an existing characteristic. Use the pushbutton Create by copying .
Enter the name of a characteristic you want to copy.
▪ Confirm your entries.
1. On the Basic data tab page enter the most important control data for the characteristic.
You must maintain the basic data for all characteristics. All other screens are optional.
5
6
7
8
9
To change a characteristic select the pushbutton Change in characteristics after entering the characteristic.
To display the characteristic choose the pushbutton Display .
10
We need to establish the characteristic is visible and ready for input:
2.1 Create batch classes
In Create Classes apps, we can create batch class which stores batch characteristics relevant to it. We must
use batch class 023 – Batch.
11
2.1.1 Classes management
Indeed, classes allow to contain characteristics. Moreover, they also allow you to classify technical objects
according to your needs.
To manage classes in SAP, it will be necessary to use the following transactions:
• CL01: Create Class
• CL02: Change Class
• CL03: Display Class
• CL04: Delete Class
12
13
In addition, each class must be defined according to its type.
14
So, for our example, let's take the MSF class, whose description is MSF EXPORT. This is a class of type 023 –
Batch. Therefore, it will be assigned to product/material.
15
16
Moreover, in the first tab "Basic data", you will find the general information of the class, such as its
description, its status, its validity date, its authorization parameters etc...
17
As explained above, the class allows to contain one or more characteristics. Thus, in the "Char." tab, this is
where we will find the characteristics assigned to the class. In our example, we can see that our class contains
a 3 characteristics: LOBM_VFDAT, Z_ASSIGNED, Z_NOTICE_FR
18
19
20
2.1.2 Assign a technical object to a class
Finally, once the characteristic and class have been created, the class must be assigned to a technical object. In
our example, this is a class for product. So, let's go to a product and assign the previously created class Z_MSF
to it:
21
22
23
24
25
26
Note: it is possible to assign several classes to a technical object. In the upper table "Assignments" you can find
all the classes to which the technical object is assigned.
There are several ways to assign a technical object to a class. The first is to go into "modification" mode in the
technical object in question (here using the Manage Product to make a modification on a material). The
second possibility is to use the Manage Object Assignments apps, which allows to assign a technical object to
classes.
27
28
29
30
31
2.2 Create Sort sequence
In Create Sort Sequence APPS, we can maintain sorting sequence.
You can define sort rules for batch determination.
Key Features
The Master Data Specialist - Batch Data role can create and maintain sort sequences for specific
characteristics using the following apps:
• Create Sort Sequence
• Change Sort Sequence
• Display Sort Sequence
You define the characteristics according to which the system sorts the batches it
finds. You can define an ascending or a descending sort sequence for each
characteristic.
The sort rule characteristics must be characteristics or Standard Characteristics that

you have used for the classification of the batch. Exceptions: You can only use
LOBM_LGORT and LOBM_MENGE for sorting. The characteristics LOBM_MENGE
and LOBM_LGORT must not be contained in the batch class, otherwise sorting will
not work with these characteristics.
Characteristic Description
LOBM_LGORT Storage location
32
LOBM_MENGE Available quantity of the batch
You can change the default value for the sort rule.
Read more in
App Documentation
33
34
35
Then, in screen, we are assigning characteristic in which batches should be

sorted out.
36
37
38
For FIFO sort strategy, I have used standard SAP characteristic LOBM_VFDAT in ascending order.
39
2.3 Configuration of condition tables, access sequences for batch
40
determination
You can find batch management configuration there:
41
Define Sales and Distribution Strategy Types

Define strategy types for batch determination in Sales and Distribution
42
Use
In this step, you define strategy types for batch determination in Sales and
Distribution:
Example
You wish to use different batch search strategies for different combinations of
sales areas and sales document types. For this purpose, you create the
following strategy types:
• a strategy type with a selection class that uses the shelf life
expiration date as search criterion during batch determination
• a strategy type with a selection class that uses the goods receipt
date as search criterion during batch determination
• a strategy type without a selection class; this enables you to define
the selection class when you create the strategy record
Prerequisites
To be able to define strategy types, you must have defined the necessary access
sequences.
Standard Settings
Strategy types YB11 and YB12 are defined in the standard SAP system.
43
44
45
46
47
48
For a homogenous batch, I have assigned “1” to parameter No. of splits, which will pick only one
batch, with no split.
49
Define Sales and Distribution Search Procedures

Short Text
Define search procedures for batch determination.
Use
Each search procedure comprises all strategy types that can be used for a
particular combination of sales area and sales document type.
Prerequisites
To be able to define search procedures, you must have defined the necessary
strategy types.
Standard Settings
The standard SAP system contains search procedure YB0001.
Activities
To create a search procedure, proceed as follows:
50
1. Select New entries, and enter a six digit key beginning with "Z" as
well as a name for the search procedure.
2. Select Control and then New entries, and enter the strategy types
in the desired sequence.
51
52
53
54
55
56
57
58
Allocate SD Search Procedure/Activate Check

Set up batch search procedures and activate batch check.
59
Use
In this work step, you assign batch search procedures to the individual
combinations of sales organization, distribution channel, division, and sales
document type for which batch determination is to occur, and activate the batch
check.
Activities
1. Assign a search procedure to each combination.
2. Set the batch check indicator if you want the system to check all
batches entered manually.
Note
Batch determination in delivery

If a delivery is used without reference to a sales order, you must have done the
following in order to execute batch determination:
Defined the default order type for the delivery type:
• Configuration step: Define Delivery Types
Find this configuration step under Manage Your Solution ->
Configure Your Solution -> Supply Chain -> Delivery Management -
> Deliveries
• Assigned the default order type to a batch search procedure
60
61
62
63
2.4 Create batch strategy

In Create Search Strategies - Sales and Distribution we are creating search strategies based on
access sequences. It will copy the default data from Strategy types in cbc.
Manage Search Strategies - Sales and Distribution

for Master Data Specialist - Batch Data
64
65
66
67
68
69
70
71
72
73
Result
Create Raw Material Stock with batch characterics and shelf life
Purpose
To run through this scope item, the materials must be available in stock. Stock can be available after
a goods receipt of a purchasing process. In this case, you do not need this preliminary step. This
process step shows you how to create raw material stock.
2 Access the App Open Manage Stock (F1062). The Manage Stock screen displays.
74
75
3 Input Material Make the following entries and Choose Enter:

Plant: 1210
Material: QM001 The Stock Overview for the material displays.
76
4 Select Stock Select the icon beside the stock that you want to add ini-tial stock, for example:
Storage Location: 121A
77
Unrestricted-Use Stock A dialog box opens. The Storage Location, Stock Type, and Current Quantity display
according to your entries in the previous steps.
78
5 Add Initial Entry Make the following entries and choose Post:
Document Date: Enter today's date
Posting Date: Enter today's date
Stock Change: Initial Entry
Quantity: Enter a number,for example, <10> The system displays Material document XXX created. The stock has
been added.
79
80
81
82
83
84
Create Sales Order with Batch determination
Purpose
This process step shows you how to create a sales order for material QM001.
Open Manage Sales Orders (F1873) . The Manage Sales Orders screen displays.
85
On Manage Sales Orders screen, select Create Sales Order.
86
On the Create Sales Documents screen, make the following entries and choose Enter:
Order Type: OR
Sales Organization: 1210
Distribution Channel: 10
Division: 00
87
On the Create Standard Order: Overview screen, make the following entries:
Sold To party: 12100003
Ship To party: 12100003
Cust. Reference: <Reference number> Enter a customer purchase order number as reference
88
Requested Delivery Date: Current date plus 2 working days

Note If a popup appears for example after changing the Delivery Date, choose Enter and accept it.
89
Material Number: QM001

Order Quantity: <Quantity> For example, < 10 PC>
90
91
92
93
Choose Save. Make a note of the sales order number. The order is saved.
94
95
96
97
98
99
100
Atp control
101
102
103
104
105

Sap SD Hana

Uploaded by

Copyright:

Available Formats

Sap SD Hana

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sap SD Hana

Uploaded by

Copyright:

Available Formats

SAP S4 HANA SD

control in SAP Cloud

The main goals to achieve were:

1.1 Create custom characteristics

1. Z_ASSIGNED → to store if batch is assigned to a dedicated customer

2 Creating, Changing, and Displaying Characteristics

Mickaël QUESNOT © - Copyright

1. choose Manage Characteristics.

2. Enter your data on the initial screen:

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

▪ To do this, choose processing type Create characteristic .

Mickaël QUESNOT © - Copyright

▪ Confirm your entries.

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

We need to establish the characteristic is visible and ready for input:

2.1 Create batch classes

Mickaël QUESNOT © - Copyright

2.1.1 Classes management

To manage classes in SAP, it will be necessary to use the following transactions:

• CL01: Create Class

• CL02: Change Class

• CL03: Display Class

• CL04: Delete Class

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

In addition, each class must be defined according to its type.

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

2.1.2 Assign a technical object to a class

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

Mickaël QUESNOT © - Copyright

2.2 Create Sort sequence

In Create Sort Sequence APPS, we can maintain sorting sequence.

You can define sort rules for batch determination.

• Create Sort Sequence

• Change Sort Sequence

• Display Sort Sequence

The sort rule characteristics must be characteristics or Standard Characteristics that

LOBM_LGORT Storage location