Aoc 156sa

15" LCD Color Monitor AOC 156Sa
Service
Service
Service
Horizontal Frequency
30-60 kHz
TABLE OF CONTENTS
Description Page Description Page
Table Of Contents…………………………………………...1 6. Schematic…............................................................17
Revision List…………………………………………………2 6.1 Main Board……………..........................................17
Important Safety Notice………………………………….…3 6.2 Power Board....……..............................................22
1. Monitor Specification..............................………........4 6.3. Audio Board…………….....................................24
2. LCD Monitor Description…………………………….......5 7. PCB Layout..………….......................................25
3. Operation Instruction……………………….…...............6 7.1. Main Board………........................................25
3.1. General Instructions...........................…...........6 7.2. Power Board….......................................28
3.2. Control Button………………………………..............6 7.3. Audio Board…………….....................................31
3.3 Adjusting the Picture...........................…............7 7.4. Key Board………………....................................31
4. Input/Output Specification............……………............9 8. Maintainability………...............................................32
4.1. Input Signal Connector............……………................9 8.1. Equipments and Tools Requirement.....................32
4.2. Factory Preset Display Modes.........................9 8.2. Trouble Shooting…………..............................32
4.3. Panel Specification…………………………………...10 9. White-Balance, Luminance adjustment.................38
5. Block Diagram……………………………...................13 10. Monitor Exploded View……………………............39
5.1. Software Flow Chart…………………………….......13 11. BOM List….....................................................40
5.2. Electrical Block Diagram…......................................15 12. Different Parts List……….………..………………51
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
1
Revision List
Revision Date Revision History TPV Model
A00 Sep.-04-2007 First Version Release T57KM5DCA7A2AN
A01 Jan.-08-2008 Add new BOM T57VM5DCA7A2AN
T57VM5DMA7JBAN
A02 May.-11-2008 Add new BOM
T57VM5NCA7GGAN
T57VM5DCA7SPAN
A03 Aug-19-2008 Add new BOM
T57VMWNCA7A4AN
2
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service
procedures recommended by AOC and described in this service manual are effective methods of performing service
operations. Some of these service operations require the use of tools specially designed for the purpose. The
special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in
order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics, may create shock,
fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC.
AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:

DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF
THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person’s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)
3
1. Monitor Specification
Items Description
Driving system TFT Color LCD
Type SVA150XG04TB
Size 38.0cm (15.0")
Pixel pitch 0.297mm (H) x 0.297mm (V)
LCD Panel Viewable angle(CR≥10) 160°(H) 160°(V) (CR>5)
Response time (type) 8 ms
Display Color 16.2M
Contrast Ratio 500:1
White Luminance 250cd/m2
Sync. Type H/V TTL
Input Connector D-Sub 15pin
Input Input Video Signal Analog:0.7Vp-p(standard),75 OHM, Positive
H-Frequency 30kHz – 60kHz
V-Frequency 50-75Hz
ON Mode ≤37W
Power Consumption
OFF Mode ≤1W
Dot Clock 80MHz
Max. Resolution 1024 x 768 (75 Hz)
Plug & Play VESA DDC2BTM
Power Source 100~240VAC,50~60Hz
Horizontal : 304.1mm
Maximum Screen Size
Vertical: 228.1mm
Dimensions(with base) 354 mm (H) x348.8 mm (W) x164.8 mm (D)
Weight (monitor only) Monitor only: 2.8kg
Operating Temp: 5°C to 35°C

Environmental
Storage Temp: -20°C to 60°C
Considerations
Operating Humidity: 10% to 85%
4
2. LCD Monitor Description
The LCD monitor will contain a main board, a power board, an audio board and a key board which house the flat
panel control logic, brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips
each voltage.
Monitor Block Diagram
Flat Panel
CCFL
and CCFL
Drive
Power board Main Board RS232 Connector
(Include: adapter, inverter) For white balance

adjustment in factory
mode
Audio board Key board
AC-IN Video signal, DDC

HOST Computer
100V-240V
5
3. Operating Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The control buttons are located in the front of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
- The power cord should be connected.
- Connect the video cable from the monitor to the video card.
- Press the power button to turn on the monitor, the power indicator will light up.
3.2 Control Button
External Controls
1. Auto Adjust button 2. Volume / -
3. Power Button & Indicator 4. Volume / +
5. MENU / ENTER 6 Earphone
•Power Button & Indicator:

Press this button to switch ON/OFF of monitor’s power.
Green — Full Power Mode
Orange — Active-off Mode
• MENU / ENTER:
Active OSD menu or function adjust confirm or Exit OSD menu when in volume OSD status.
• Volume / +: Increase volume or adjust function.
• Volume / -: Decrease volume or adjust function.
• Auto Adjust button :
1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).
2. When OSD menu is in off status, press this button to activate the Auto Adjustment function.
The Auto Adjustment function is used to optimize the HPos, VPos, Clock and Focus.
6
3.3 Adjusting the Picture
Adjustment steps:
• Press the MENU-button to activate the OSD window.
• Press+ or - to navigate through the functions. Once the desired function is highlighted, press the
MENU-buttonto activate it.If the function selected has a sub-menu, press or again to navigate through the
sub-menu functions.Once the desired function is highlighted, press MENU-button to activate it.
• Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you
want to adjust any other function, repeat steps 2-3.
• Eco Mode hot key : Press the Eco key continuously to select the Eco mode of brightness when there is no
OSD ( Eco mode hot key may not be available in all models).
• Volume adjustment hot key : Press Vol/- or Vol/+ to adjust volume when there is no OSD ( Only for the
models with speakers)
• OSD Lock Function: To lock the OSD, press and hold the MENUbutton while the monitor is off and then
press power button to turn the monitor on. To un-lock the OSD - press and hold the MENUbutton while the
monitor is off and then press power button to turn the monitor on.
OSD TABLE:
Main Menu Sub Menu

Main Menu Item Sub Menu Item Description
Icon Icon
Contrast Contrast from Digital-register.

Luminance
Brightness Backlight Adjustment
Adjust Picture Phase to reduce Horizontal-Line

Focus
noise
Image Setup
Adjust picture Clock to reduce Vertical-Line
Clock
noise.
H. Position Adjust the horizontal position of the picture.

Image Position
V. Position Adjust the vertical position of the picture.
7
Recall Warm Color Temperature from
Warm N/A
EEPROM.
Cool N/A Recall Cool Color Temperature from EEPROM.
Recall sRGB Color Temperature from

Color Temp. sRGB N/A
EEPROM.
User / Red Red Gain from Digital-register.
User / Green Green Gain Digital-register.
User / Blue Blue Gain from Digital-register.
Yes Auto Adjust the H/V Position, Focus and Clock

N/A
of picture.
Input Select
Do not execute Auto Config, return to main
No N/A
menu.
H. Position Adjust the horizontal position of the OSD.
OSD Setup V. Position Adjust the vertical position of the OSD.
OSD Timeout Adjust the OSD timeout.
Language Language N/A Set OSD display language that you like..
Show the resolution, H/V frequency and input

Information Information N/A
port of current input timing.
Clear each old status of Auto-configuration and

Yes N/A
set the color temperature to Cool.
Reset
No N/A Do not execute reset, return to main menu.
Exit N/A N/A Exit OSD
8
4. Input/Output Specification
4.1 Input Signal Connector
Pin No. Description Pin No. Description

1. Red Video 9. +5V
2. Green Video 10. VGA-CON
3. Blue Video 11. N.C.

4. N.C. 12. DDC-Serial Data
5. Ground 13. H-Sync
6. Red Ground 14. V-Sync
7. Green Ground 15. DDC-Serial Clock
8. Blue Ground
VGA connector layout
1 5
6 10
11 15
4.2 Factory Preset Display Modes

Vertical
Standard Horizontal
Resolution Frequency (Hz)
Frequency (KHZ)
720 x 400 31.47 70.0
640 × 480 31.47 60.0

VGA 640 × 480 35.00 66.6
640 × 480 37.50 75.0
640 × 480 37.861 72.8
800 × 600 35.156 56.3
800 × 600 37.879 60.0
SVGA 800 × 600 48.077 72.2
800 × 600 46.875 75.0
832 x 624 49.725 75.0
1024 × 768 48.363 60.0
XGA 1024 × 768 56.476 70.0

1024 x 768 60.24 74.9
1024 × 768 60.02 75.0
9
4.3 Panel Specification
HT150X02-100 is a color active matrix TFT LCD module using amorphous silicon TFT's(Thin Film Transistors) as an
active switching devices. This module has a 15.0 inch diagonally measured active area with XGA resolutions (1024
horizontal by 768 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in
vertical stripe and this module can display 16,194,227 colors. The TFT-LCD panel used for this module is adapted
for a low reflection and higher color type.
Features
LVDS Interface with 1 pixel / clock
High-speed response
Low power consumption
6-bit (FRC) color depth, display 16,194,227 colors
Incorporated edge type back-light (Two lamps)
High luminance and contrast ratio, low reflection and wide viewing angle
DE (Data Enable) & H-Sync & V-Sync mode
RoHS Compliant
4.3.1 Display Characteristics
10
4.3.2 Optical Characteristics
11
4.3.3 Electrical Characteristics
TFT LCD Module:
Back Light Unit:
12
5. Block Diagram
5.1 Software Flow Chat
2 Y
3
5 N
7 N
8
10 N
11
N N
12 13
Y Y
14 15 N
16
17
N
18 19
13
1) MCU initializes.
2) Is the EPROM blank?
3) Program the EPROM by default values.
4) Get the PWM value of brightness from EPROM.
5) Is the power key pressed?
6) Clear all global flags.
7) Are the AUTO and SELECT keys pressed?
8) Enter factory mode.
9) Save the power key status into EPROM.

Turn on the LED and set it to green color.
Scalar initializes.
REMARK:
9) Save the power key status into EPROM.
Turn on the LED and set it to green color.
Scalar initializes.
10) In standby mode?
11) Update the lifetime of back light.
12) Check the analog port, are they’re any signals coming?
13) Does the scalar send out an interrupt request?
14) Wake up the scalar.
15) Are there any signals coming from analog port?
16) Display "No connection Check Signal Cable" message. And go into standby mode after the message
disappears.
17) Program the scalar to be able to show the coming mode.
18) Process the OSD display.
19) Read the keyboard. Is the power key pressed?
14
5.2 Electric Block Diagram

5.2.1 Main Board
Crystal (14.318MHz) LCD interface

(X401) (CN101)
EEPROM Scalar TSUM16AK

PM25LV512 (Include MCU, ADC, OSD)
(U402) (U401)
H sync
V sync
RGB
D-Sub
Connector
(CN405)
EEPROM
M24C02-WMN6TP
(U404)
15
5.2.2 Power Board
AC input Bridge Rectifier

Transformer
EMI filter Rectifier CMOS
Start Circuit
R906 R907 CON102
5V
PWM Over 12V
Control IC Voltage
ON/OFF
OSC and MOSFET
DC Convert
Output Q203
Lamp Circuit
Feedback Over ON/OFF

PWM
Circuit Voltage Control
Control IC
DIM
16
6. Schematic
6.1 Main Board
B3
TSUMxxAK XGA/SXGA
B4
SCHEMATIC
LVDS OUTPUT
+5V RIN RIN
GNDR GNDR
GIN GIN
GNDG GNDG
SOG SOG
+5V BIN BIN
GNDB GNDB
HSY NC HSY NC VCC1.8 VCC3.3 +5V +12V
VSY NC VSY NC
DDCA_SDA DDCA_SDA
DDCA_SCL DDCA_SCL
DET_VGA DET_VGA
DDC_WP DDC_WP VCC1.8

R+ R+
R- R- Vcc3.3
G+ G+
G- G- +5V
B+ B+
B- B- +12V
CLK+ CLK+
CLK- CLK-
DDCD_SDA DDCD_SDA
DDCD_SCL DDCD_SCL
DET_DVI DET_DVI
3.INPUT
B5
PA[0..7]
PA[0..7] PA[0..7]
PA[8..13]
PA[8..13] PA[8..13]
PA[14..19]
PA[14..19] PA[14..19]
PB[0..5]
PB[0..5] PB[0..5]
+12V PB[6..11]
PB[6..11] PB[6..11]
PC5V PB[12..23]
PB[12..23] PB[12..23]
+3V3 GPO[0..4]
GPO[0..4] GPO[0..4] VLCD VLCD_12V
VCC1.8
ESP ESP
+5V
OSP OSP VLCD
VCC5V B2
on_BACKLIGHT on_BACKLIGHT VLCD_12V
VCC3.3
on_Panel on_Panel
on_PANEL_12V on_PANEL_12V
+12V
PC5V
+3V3
VCTRL VCTRL 5.PANEL INTERFACE
VCC1.8
+5V Adj_BACKLIGHT Adj_BACKLIGHT
VCC5V
VCC3.3 VLCD VLCD_12V
TPV（Top Victory）Electronics Co.,Ltd
Title
VLCD 4.SCALER TSUM16AK TOP
VLCD_12V Size Document Number Rev
2.POWER B G1558-2F-2-X-3-061229 B
Date: Friday , December 29, 2006 Sheet 0 of 5
17
+5V
U701
SOT-223 +3V3 H1 H2 H3
VCTRL 4
AIC1084-33PE R702
3 2 51Ω 1/10W
VI VO +3V3
8
7
6
8
7
6
8
7
6
4 9 5 9 5 9 5
GND
8
7
6
8
7
6
8
7
6
C701 VO C703 + C704 9 5 4 9 5 4 9 5 4
4 4 4 VCC1.8
1
2
3
1
2
3
1
2
3
NC 100uF/16V NC NC NC NC + C702
4.7uF50V
1
2
3
1
2
3
1
2
3
VCC1.8 4
D701
BL_ADJ(DC) R31 C51 R32 R29 R33 Q4

0V ~ 3.3V 4.7K 1UF 0 X X X LL4148
0V ~ 5V 4.7K 1UF X 1K 4.7K MMBT3904 Q702 R703
D702 PZT2907A 2KΩ 1/10W
BL_ADJ R31 C32
P W M 47 N.C
D C 4K7 1uF
C705 LL4148
+5V +
NC R704
+12V 100Ω 1/10W
R708 VCC3.3
CN701 10KΩ 1/10W +5V
+12V 4
C706 C707
VCC3.3 4
+ GND 2 1 BL_ON R710 NC R711
NC NC GND 4 3 BL_ADJ 10KΩ 1/10W
+12V 6 5 +12V Q703 +5V PC5V Recommond to used "Blue" parts circuit
+5V GND 8 7 GND
+5V 10 9 +5V C711 R712 for VCC1.8V if you want to suppoert DDC
3,4 +5V on_BACKLIGHT 4 3,4 +5V PC5V 3
GND 12 11 GND 0.1uF 50V 4.7KΩ 1/10W function when system power off
PMBS3904
R732 R709
CONN
C709 C710
+ +5V NC NC
VCC5V
3,4 +5V
0.1uF 50V 100uF/25V
1
D704
D704(SSM12L) Vf=0.38V and If=1A.
R701
1KΩ 1/10W So when system power on, the D703
system loading is about 400mA NC TO-263
SMAL140
R706 NC (3.3V is about 200mA and 1.8V is U702 VCC3.3
R705
3
4.7KΩ 1/10W about 200mA), So D35 changed 3 2
VIN VOUT VCC3.3 4
C708 from 1N4148(or BAT42) to
4 R707 Q701 1
Adj_BACKLIGHT SSM12L(schottky diode). ADJ
4.7KΩ 1/10W 1uF/16V
PMBS3904 R713 C712
AIC1084-33PM +
P.S: The 1N4148 Vf=0.7V~1V can't meet C713 NC C714
0.1uF 50V 0.1uF 50V
LDO spec. The BAT42, Vf is OK but the 100uF/25V
If=200mA(forward current) can not R720
0Ω 1/10W
meet current spec.
12/21 MODIFY
+3V3 +3V3
For RSDS and Panel VCC=12V
+5V
VLCD
+5V +5V +12V VLCD_12V
VLCD 5 For USB
+5V +3V3 +5V +12V +12V CN702
VLCD_12V 5
R717 R714 R715
R716 NC R718 R729 R719 5
10KΩ 1/10W 4
NC R721 R722 NC NC NC R730 R731 USB CTRL 3
10KΩ 1/10W Q704 NC NC 2
R723 AO3401 0Ω 1/10W Q705 NC 1
51 KOHM +-5% 1/10W R724 NC NC
R725 Q706 R726 NC C716

4 on_Panel
4.7KΩ 1/10W PMBS3904 C715 Q707 NC
4 on_Panel_12V
NC GND
C718 0.1uF 50V+ C717 R727 NC
10uF/50V 10KΩ 1/10W C720 + C719 R728
0.1uF 50V Title
NC NC NC POWER
Size Document Number Rev
B
G1558-2F-2-X-3-061229 B
18
CN405
17
11 1 RED+ FB410 R434 C432 0.047uF50V
RIN 4
6 RED- 0Ω 1/10W 56Ω 1/10W
12 2 GREEN+ FB411 R435 C433 0.047uF50V
GIN 4
7 GREEN- 0Ω 1/10W 56Ω 1/10W
13 3 BLUE+ FB412 R436 C434 0.047uF50V
BIN 4
8 BLUE- 0Ω 1/10W 56Ω 1/10W
14 4 PC5V R437 C435 0.047uF50V
75Ω 1/10W
75Ω 1/10W
75Ω 1/10W
SOG 4
9 PC5V 470Ω 1/10W
R438
R439
R440
15 5 VGA_CON
10
DB15 R441 C436 0.047uF50V

GNDR 4
16
100Ω 1/10W
R442 C437 0.047uF50V
GNDG 4
100Ω 1/10W
R443 C438 0.047uF50V
GNDB 4
100Ω 1/10W
3
D403 BAV99 BAV99 D405 +5V
2
D406 D404
BAV99
+5V 2,4
ESD_5V
MLL5232B 5.6V
C439 C440 C441 R444

10KΩ 1/10W
0.1uF 50V 0.1uF 50V 0.1uF 50V
1
1
R445 +5V PC5V
DET_VGA 4
100Ω 1/10W
2
HSI 1 2 R446
HSY NC 4
FB409 120 OHM 1KΩ 1/10W
D407
VSI R447 BAV70
VSY NC 4
1KΩ 1/10W
MLL5232B 5.6V
2.2KΩ 1/10W
2
2
MLL5232B 5.6V
MLL5232B 5.6V
3
4.7KΩ 1/10W
R448 R449
D408
D409
D410
4.7KΩ 1/10W
C442 C443
10KΩ 1/10W
33pF 2.2KΩ 1/10W 220pF
R451
R450
U404
R452
C444
8 1 0.1uF 50V
1
1
7 VCC A0 2
SCL_VGA R453 100Ω 1/10W 6 WP A1 3
SDA_VGA R454 100Ω 1/10W 5 SCL A2 4
SDA VSS
VCC5V M24C02-WMN6TP
CN406
2
MLL5232B 5.6V
MLL5232B 5.6V
D411
D412
4 DDCA_SDA
25 R471
R 4 DDCA_SCL DDC_WP 4
26
G 27 NC +5V DVI5V
B 29
1
RGB GND
1
28
HSY NC 8
VSY NC 15 R458 NC
SY NC GND DET_DVI 4
6 SCL_DVI R455 NC DVI5V D413
DDC SCL 7 SDA_DVI R456 NC R457 NC
DDC SDA 14 DVI5V NC
+5V 16 HPD
HPD
3
11
1/3shield 3 R472 D426 D414 D415 D416 C445 R459 R460 R461
2/4shield 19 NC NC NC NC NC NC U405 C446
0/5shield 22 NC NC NC 8 1
clk shield 7 VCC A0 2 NC
18 DAT0+ R462 NC 6 WP A1 3
DAT0+ B+ 4 SCL A2
17 DAT0- R463 NC 5 4
DAT0- B- 4 SDA GND
10 DAT1+ R464 NC
DAT1+ G+ 4
9 DAT1- R465 NC
DAT1- G- 4
2 DAT2+ R466 NC NC
DAT2+ R+ 4 4 DDCD_SDA
1 DAT2- R467 NC
DAT2- R- 4 4 DDCD_SCL
13
DAT3+ 12
DAT3- DDC_WP 4
5
DAT4+ 4
DAT4- 21 +5V
DAT5+ 20 R473
DAT5- 23 DCLK+ R468 NC
clk+ CLK+ 4
24 DCLK- R469 NC NC
clk- CLK- 4
R470
3
NC D417 D418 D419 D420 D421 D422 D423 D424 NC

NC NC NC NC NC NC NC NC
ESD_5V
C447 C448 C449 C450 C451 C452 C453 C454 TPV（Top Victory）Electronics Co.,Ltd
D425 Title
INPUT
2
NC NC NC NC NC NC NC NC NC
B A
G1558-2F-2-X-3-061229
19
VDVI VMPLL VPLL AVDD VDDP VDDC
VCC1.8 VDDC
VCC3.3 AVDD
1 2
2 VCC1.8
600 OHM 1 2
2 VCC3.3
FB401 600 OHM
103
115
117
+ C403 C404 C405 C406 FB402
44
50
34
52
60
14
67
95
12
97
68
4
4.7uF50V
0.1uF 50V
0.1uF 50V
0.1uF 50V C407
VCC3.3 11 0.1uF 50V
VDDP
VDDP
VDDP
VDDP
VDDP
VDD_OTP
AVDD_MPLL
AVDD_MPLL
AVDD_PLL
VCTRL 2
AVDD_DVI
AVDD_DVI
AVDD_ADC
VDDC
VDDC
VDDC
VCTRL
107 PA0
59 NC/LVACKP/NC 108 PA1
3 RIN RIN0P NC/LVACKM/NC
3 GNDR 58 109 PA2
R489 R490 56 RIN0N RA1P/LVA2P/RA2 110 PA3
3 GIN GIN0P RA1N/LVA2M/RA3
3 GNDG 55 111 PA4
NC NC 57 GIN0N RA2P/LVA1P/RA4 112 PA5 VCC3.3
3 SOG SOGIN0 RA2N/LVA1M/RA5
3 BIN 54 113 PA6 VDDP
53 BIN0P RA3P/LVA0P/RA6 114 PA7 1 2
3 GNDB BIN0N RA3N/LVA0M/RA7 2 VCC3.3
3 HSY NC 63 600 OHM
64 HSY NC0 98 PA8 FB403
3 VSYNC VSYNC0 GA1P/NC/GA2
65 99 PA9
3 DDCA_SDA DDCA_SDA GA1N/NC/GA3
66 100 PA10
3 DDCA_SCL DDCA_SCL GA2P/NC/GA4 101 PA11
39 GA2N/NC/GA5 105 PA12
3 R+ RX2P GA3P/LVA3P/GA6
40 106 PA13 C408 + C409 C410 C411 C412 C413
3 R- RX2N GA3N/LVA3M/GA7 0.1uF 50V
0.1uF 50V
0.1uF 50V
0.1uF 50V
0.1uF 50V
42
3 G+ RX1P
43 89 PA14 10uF/50V
3 G- RX1N BA1P/NC/BA2
45 90 PA15
3 B+ RX0P BA1N/NC/BA3
46 91 PA16 P[0..7]
3 B- RX0N BA2P/NC/BA4 PA[0..7] 5
48 92 PA17
3 CLK+ RXCKP BA2N/NC/BA5
49 93 PA18 PA[8..13]
3 CLK- RXCKN BA3P/NC/BA6 PA[8..13] 5
36 94 PA19
3 DDCD_SDA DDCD_SDA BA3N/NC/BA7
37 PA[14..19]
3 DDCD_SCL DDCD_SCL PA[14..19] 5
9 PB0
RB1P/NC/RB2 10 PB1 VCC3.3 VDVI VCC3.3 VPLL
RB1N/NC/RB3 15 PB2
R403 51 RB2P/NC/RB4 16 PB3 1 2 1 2
AVDD 2 VCC3.3 2 VCC3.3
390 OHM +-1%REXT
1/10W RB2N/NC/RB5 17 PB4 600 OHM 600 OHM
RB3P/NC/RB6 18 PB5 FB404 FB405
62 RB3N/NC/RB7 PB[0..5] C414 C415 C416
REFP PB[0..5] 5 0.1uF 50V
0.1uF 50V 0.1uF 50V
2 PB6
C401 GB1P/NC/GB2 3 PB7 PB[6..11]
0.1uF GB1N/NC/GB3 PB[6..11] 5
VCC3.3 61 50V 5 PB8
REFM GB2P/NC/GB4 6 PB9
GB2N/NC/GB5 7 PB10
GB3P/NC/GB6 8 PB11 PB[12..23]
GB3N/NC/GB7 PB[12..23] 5
R486
U402 TSUM16AK CLKAP/LVB3P/LHSYNC
118 PB12 VCC3.3 VMPLL
VCC3.3 1 8 70 119 PB13
CE# VCC SDO CLKAN/LVB3M/LVSYNC ESP 5
NC 2 7 71 120 PB14 1 2
SO HOLD# SCZ CLKBP/LVBCKP/LCK_ODD OSP 5 2 VCC3.3
C417 3 6 72 121 PB15 600 OHM
C418 0.1uF 50V 4 WP# SCK 5 73 SCK CLKBN/LVBCKM/LDE 122 PB16 FB406
+ GND SI SDI NC/LVB2P/NC 123 PB17 GPO[0..4] C419 C420
NC/LVB2M/NC GPO[0..4] 5 0.1uF 50V
0.1uF 50V
WP PM25LV512-25SCE 124 PB18
NC BB1P/LVB1P/BB2 125 PB19
BB1N/LVB1M/BB3
R487 RSDS/LVDS/TTL BB2P/LVB0P/BB4
126 PB20
10KΩ 1/10W 19 127 PB21
RST BB2N/LVB0M/BB5 128 PB22
BB3P/NC/BB6 1 PB23
BB3N/NC/BB7 DDC_WP 3
R404
NC C421 80 ESP R405 Q402
32 ESP 81 OSP 4.7KΩ 1/10W PMBS3904
XIN OSP
2
22pF50V 88 GPO0
X401 GPO0 87 GPO1 VCC3.3
10KΩ 1/10W
GPO1
R406
C423 86 GPO2 C422
33 GPO2 85 GPO3 0.1uF 50V
14.31818MHzXOUT GPO3 84 GPO4
1
22pF50V GPO4 83 R481 R482

GPO5 82
GPO6 NC NC
75
GPIO_P22 74 +5V VCC3.3
GPIO_P23
C
VCC3.3 26 USB CTRL
GPIO_P03 on_PANEL_12V 2
B Q405
+5V 2,3
35 VCC3.3 R408
GPIO_P16 DET_DVI 3
R407 NC 102 69 NC R409
MODE[0] GPIO_P15 DET_VGA 3
R410 NC 104 78 R488 WP KEY A 120Ω 1/10W
E
MODE[1] PWM2/GPIO_P24 79 NC R483 R412 R413 10KΩ 1/10W
GPIO_P27/PWM1 on_PANEL 2
NC C616 10KΩ 1/10W R414
20 120Ω 1/10W
GPIO_P16 on_BACKLIGHT 2
2
21 NC 10KΩ 1/10W
PWM1/GPIO_P25 adj_BACKLIGHT 2
R417 1 Q403
+5V R415 22 20 KOHM +-5% 1/10W PMBS3906 R419
GPIO_P17/SAR0
2
U406 R416 23 R418 100Ω 1/10W KEY 1 C424 LED_A
10KΩ 1/10W 10KΩ 1/10W GPIO_P00/SAR1 24 R420 100Ω 1/10W KEY 2 0.1uF 50V 1 Q401 0Ω 1/10W
3
3 2 GPIO_P01/SAR2 25 R411 100Ω 1/10W POWER PMBS3906 R421
VCC RST GPIO_P02/SAR3 LED_G
GND
27 R422 4.7KΩ 1/10W 0Ω 1/10W
3
GPIO_P06 28
GPIO_P07 29 R423 4.7KΩ 1/10W Volume
G690H438T73UF PWM0/GPIO_P26 30 AUDIO_MUTE
1
GPIO_P13 31 AUDIO_STBY
Re s e t GPIO_P14
Circuit VCC3.3
77 VCC3.3
DDCROM_SCL 76
GND
GND
GND
GND
GND
GND
DDCROM_SDA
10KΩ 1/10W C425 R474 R475
10KΩ 1/10W
10KΩ 1/10W
R426 0.22uF
116
U403
13
38
41
47
96
3.9KΩ 1/10W 3.9KΩ 1/10W

R424
R425
8 1
R427 100Ω 1/10W 7 VCC NC 2
R428 100Ω 1/10W 6 WC NC 3
R429 100Ω 1/10W 5 SCL NC 4
SDA VSS KEY2 KEY_AUTO
M24C16 R476
KEY_RIGHT
Option 1 KOHM +-1% 1/10W
R478 NC KEY _A
R480 NC KEY _B
KEY1 KEY_MENU
FB407 R477
NC +12V KEY_LEFT
1 KOHM +-1% 1/10W
R479 NC KEY _C
+12V 2
+5V
LED_G
+5V 2,3
FB408 +5V LED_A
NC POWER
D401 D402
2
+5V C428 C429 C430
C426 C427
CN404 R484 R485
R430 NC NC
1 2 0.1uF 50V 0.1uF 50V RLZ36B RLZ36B
NC 3 4 CN403 0.1uF 50V
1
R431 NC 5 6 AUDIO_STBY 0.1uF 50V
R432 NC 7 8 AUDIO_MUTE 0.1uF 50V
9 10 KEY_B 1 2 KEY_A
R433 NC OUT-L+ 11 12 OUT-R+ LED_G 3 4 LED_A
Volume Q404 C431 OUT-L- 13 14 OUT-R- KEY_AUTO 5 6 KEY_MENU
KEY_RIGHT 7 8 KEY_LEFT
NC NC POWER 9 10
11 12 KEY_C
NC OUT-L+ 13 14 OUT-R+ TPV（Top Victory）Electronics Co.,Ltd
OUT-L- 15 16 OUT-R-
Title
SCALER
CONN Size Document Number Rev
C
G1558-2F-2-X-3-061229 A
GND
20
PB[0..5]
4 PB[0..5]
PA[0..7] PB0 RB1P CN102 CN103
4 PA[0..7]
PA[0..7] PB1 RB1N
4 PA[0..7] 1 1
PA0 LVACKP PB2 RB2P RA3N FB0N RB3N B0N
PA2 RA1P PA1 LVACKM PB3 RB2N RA3P FB0P 2 RB3P B0P 2
PA3 RA1N PA2 LVA2P PB4 RB3P 3 3
PA4 RA2P PA3 LVA2M PB5 RB3N RA2N FB1N 4 RB2N B1N 4
PA5 RA2N PA4 LVA1P RA2P FB1P 5 RB2P B1P 5
PA6 RA3P PA5 LVA1M PB[6..11] 6 6
4 PB[6..11] 7 7
PA7 RA3N PA6 LVA0P RA1N FB2N RB1N B2N
PA7 LVA0M PB6 GB1P RA1P FB2P 8 RB1P B2P 8
PA[8..13] PA12 LVA3P PB7 GB1N 9 9
4 PA[8..13] 10 10
PA13 LVA3M PB8 GB2P GA3N FG0N GB3N BG0N
PA8 GA1P PB9 GB2N GA3P FG0P 11 GB3P BG0P 11
PA9 GA1N PB10 GB3P 12 12
PA10 GA2P PB11 GB3N GA2N FG1N 13 GB2N BG1N 13
PA11 GA2N GA2P FG1P 14 GB2P BG1P 14
PA12 GA3P PB[12..23] 15 15
4 PB[12..23] 16 16
PA13 GA3N GA1N FG2N GB1N BG2N
PB14 CLKBP GA1P FG2P 17 GB1P BG2P 17
PB15 CLKBN 18 18
CLKAN FCLKN 19 CLKBNBCLKN 19
PB[12..23] PB18 BB1P CLKAP FCLKP 20 CLKBPBCLKP 20
4 PA[14..19] 4 PB[12..23] 21 21
PB12 LVB3P PB19 BB1N
PA14 BA1P PB13 LVB3M PB20 BB2P BA3N FR0N 22 BB3N BR0N 22
PA15 BA1N PB14 LVBCKP PB21 BB2N BA3P FR0P 23 BB3P BR0P 23
PA16 BA2P PB15 LVBCKM PB22 BB3P 24 24
PA17 BA2N PB16 LVB2P PB23 BB3N BA2N FR1N 25 BB2N BR1N 25
PA18 BA3P PB17 LVB2M BA2P FR1P 26 BB2P BR1P 26
PA19 BA3N PB18 LVB1P 27 27
PB19 LVB1M BA1N FR2N 28 BB1N BR2N 28
PB12 CLKAP PB20 LVB0P BA1P FR2P 29 BB1P BR2P 29
PB13 CLKAN PB21 LVB0M 30 30
OSP R101 NC STH 31
4 OSP 32
GPOO1 LP NC
GPOO0 POL 33
ESP R102 NC STV2 34
4 ESP 35
GPO[0..4] RP101 NC CN101
4 GPO[0..4] 36
C106 C107 GPOO3 CLKV
GPO0 1 8 GPOO0 GPOO2 STV1 37
GPO1 2 7 GPOO1 NC NC GPOO4 OE 38 LVB0M RXO0- 1 2 RXO0+ LVB0P
GPO2 3 6 GPOO2 39 LVB1M RXO1- 3 4 RXO1+ LVB1P
GPO3 4 5 GPOO3 R103 NC 40 LVB2M RXO2- 5 6 RXO2+ LVB2P
GPO4 R110 NC GPOO4 41 LVBCKM RXOC- 7 8 RXOC+ LVBCKP
2 VLCD 42
R104 NC LVB3M RXO3- 9 10 RXO3+ LVB3P
R105 NC 43 LVA0M RXE0- 11 12 RXE0+ LVA0P
VLCD R106 NC 44 LVA1M RXE1- 13 14 RXE1+ LVA1P
R107 NC 45 LVA2M RXE2- 15 16 RXE2+ LVA2P
VLCD_12V 46 LVACKM RXEC- 17 18 RXEC+ LVACKP
C101 C102 C103 C104 C105 R108 NC 47 LVA3M RXE3- 19 20 RXE3+ LVA3P
2 VLCD_12V 48
NC NC NC NC NC R109 NC 21 22
49 23 24
50
NC
CONN
VLCD
CN7 CN8 CN9 RP1 R88 R89 R91 Table 1

Table 1 R90 R92 R93 R94 R95 R96 R97 VLCD 2
LVDS Panel X X V X X X X X
5V 5V 5V
RSDS Panel V V X V V V V V AU 17 NC NC 0R 0R NC 0R NC
QDI 17 3.3V 12V 12V 12V
CPT 17 0R 0R NC NC 0R NC 0R
3.3V 3.3V
INNOLUX 15 0R NC 0R NC NC NC NC
HannStar 15 3.3V 3.3V 12V
CPT 15 0R NC 0R NC 0R NC NC
3.3V 3.3V
LG 15 0R NC 0R NC NC NC NC
3.3V 3.3V 3.3V
Innolux 17" NC NC 0R 0R NC 0R NC

Title
PANEL INTERFACE
B B
G1558-2F-2-X-3-061229
21
6.2 Power Board
22
23
6.3 Audio Board
OUT_L
+12V
CN202 MUTE
14 13
CN204 12 11
NC 10 9 + +
VOLUME 8 7 C203
1 +12V 6 5 C201 C202 0.1uF
2 4 3 470uF/16V 470uF/16V
3 2 1
C214 + GND OUT_R
STANDBY
NC GND
CONN U201
E-TDA7496L
16
15
8
GND
CN201 C205
VS
VS
NC
5 C204 0.1uF 470uF/16V
1 R201 18K OHM 4 17
+
2 INL OUTL
C206 0.1uF
3 9 14
+
4 INR OUTR
R203 18K OHM 6 10 C207
NC VOLUME SVR 470uF/16V CN203
R212 11 7
STBY VAROUT_R
2
GND 220K OHM 4

ZD202 12 5 3
ZD201 MUTE VAROUT_L 2
NC NC 1
GND
GND
GND
GND
GND
GND
GND
C211 C209
R210 R211 C212 C210 +
+ + +
1
0.001uF 0.001uF 1.0uF/50V C213 NC

20K OHM20K OHM C208 R202 R207 R208
10uF/50V 1.0uF/50V
13
18
19
20
1K OHM 1K OHM
200K OHM
1
2
3
470uF/16V GND
GND GND GND GND GND GND
T P V ( Top Victory Electronics Co . , Ltd. ) OEM MODEL 156Sa Size A
絬隔瓜絪腹 G2709-1-2-X-3-070723 TPV MODEL T57KM5DBE4A1A Rev 1.0

Key Component 01.COVER PCB NAME 715G2709-1-2
称爹 <称爹>
Date Thursday , July 26, 2007 Sheet 1 of 2
24
7. PCB Layout
7.1 Main Board
25
26
27
7.2 Power Board
28
29
30
7.3 Audio board
8. Maintainability
7.4 Key Board
31
8.1 Equipments and Tools Requirement

1. Voltmeter.
2. Oscilloscope.
3. Pattern Generator.
4. DDC Tool with an IBM Compatible Computer.
5. Alignment Tool.
6. LCD Color Analyzer.
7. Service Manual.
8. User Manual.
8.2 Trouble Shooting

8.2.1 Main Board
No power
No power
Press power key and look

if the picture is normal
NG
Please reinsert and make sure

the AC of 100-240 is normal
NG Reinsert or check the

Adapter/Inverter
OK
section
Measure U702 PIN2, 4=3.3V
D701 (-)=1.8V
NG Check CN701 or replace

U702, Q702, D701
OK
X401 oscillate waveforms

are normal
NG
OK
Replace X401
Replace U401
32
No picture (LED orange)
No picture
The button if under NG NG

X401 oscillate Replace X401
control waveform is normal
OK
OK
Check reset circuit of NG Check Correspondent
component
U401 is normal
Measure U702 PIN2, 4=3.3V
D701 (-)=1.8V OK
Replace U401
OK
X401 oscillate NG
waveform is normal
Replace U702, Q702,D701
NG
OK
Replace X401
Check HS/VS from

CN405 is normal
NG Check Correspondent
OK
component
Replace U401
33
White screen
White screen
NG
Measure Q706 base X401 oscillate
waveform is normal
is high level?
OK NG Replace X401
OK
Check Q706, Q704 is Check reset circuit of

broken or CN101 solder? U401 is normal
NG Check Correspondent
Check Correspondent NG
component.
component.
OK
OK
Replace U401
Replace PANEL
34
8.2.2 Power Board
1.) No power
No Power
Check AC line volt 110V or 220V
NG
OK Check AC line
Check the voltage of C905(+)
NG
OK Check F901, BD901
Check start voltage for the pin3 of IC901=16v
NG
OK Check R906, R907, IC901
Check the output voltage (pin 8) of IC901
NG (Stable)
OK Check D901,Q903
1) Check IC901,T901
2) Check D910, D912, ZD903
3) Check IC902, IC903
35
2.) W / LED, No Backlight
Check C201 (+) =12V
NG
Check F201
OK
Check adapter part
Check ON/OFF signal
NG
OK Check Interface board
Check U201 pin9=12V voltage
NG
Change Q201 or Q202
OK
Check the pin10 of U201 if have waveforms
NG
Short Q203 if the picture normal
OK
Change U201
NG
Connect PIN15 of U201 to the ground and check Q209/Q210 collector waveforms
NG
Change Q209/Q210/PT201
OK
Check feedback circuit

NG
Check connecter & lamp
36
8.2.3 Key Board
OSD is unstable or not working
N
Is Key Pad Board connecting normally? Connect Key Pad Board
N
Is Button Switch normally? Replace Button Switch
N
Is Key Pad Board normally? Replace Key Pad Board
Check Main Board
37
9. White- Balance, Luminance Adjustment
Approximately 30 minutes should be allowed for warm up before proceeding White-Balance adjustment.
1. How to do the Chroma-7120 MEM. Channel setting
A. Reference to chroma 7120 user guide
B. Use “SC” key and “NEXT” key to modify x, y, Y value and use “ID” key to modify the
TEXT description Following is the procedure to do white-balance adjust
2. Setting the color temp. you want

A. MEM.CHANNEL 3 (7800 color):
7800 color temp. parameter is x = 296 ±20, y = 311 ±20, Y = 180 cd/m2 ,
B. MEM.CHANNEL 4 (6500 color):
6500 color temp. parameter is x = 313±20, y = 329 ±20, Y =180 cd/m2
3. Enter into factory mode of 156Sa

Turn on power, press the MENU button, pull out the power cord, and then plug the power cord. Then the factory
OSD will be at the left top of the panel.
4. Bias adjustment:
Set the Contrast to 50; Adjust the Brightness to 80.
5. Gain adjustment:
Move cursor to “-F-” and press MENU key
A. Adjust 7800 color-temperature

1. Switch the Chroma-7120 to RGB-Mode (with press “MODE” button)
2. Switch the MEM. Channel to Channel 3 (with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 296 ±20, y = 311 ±20, Y =180 cd/m2
4. Adjust the RED of color1 on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN of color1 on factory window until chroma 7120 indicator reached the value G=100
6. Adjust the BLUE of color1 on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4,5,6) until chroma 7120 RGB value meet the tolerance =100±2
B. Adjust 6500 color-temperature

1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 4(with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 ±20, y = 329 ±20, Y = 180 cd/m2
4. Adjust the RED of color3 on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN of color3 on factory window until chroma 7120 indicator reachedthe value G=100
6. Adjust the BLUE of color3 on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4,5,6) until chroma 7120 RGB value meet the tolerance =100±2
C. Turn the Power-button off to quit from factory mode.
38
10. Monitor Exploded View
39
11. BOM List
T57KM5DCA7A2AN
Location Part NO. Description
015G5908 3 BRACKET
026G 800504 3 BARCODE LABEL
044G3582 1 EPS (L)
044G3582 2 EPS (R)
044G6002102 79 PAPER BOARD
044G6002690 2A PAPER BOARD
044G9003214 CORNER PAPER
044GH600 1 HANDLE 2
050G 600 4 HANDLE 1
052G 1185 MIDDLE TAPE
052G 1186 SMALL TAPE
052G 1207 A ALUMINIUM TAPE
052G 1211 B AL TAPE
052G 1211513 AL TAPE
052G6025 11840 MYLAR
E07801 078G 314 2B YL SPEAKER 8OHM 1W
E07802 078G 314 2B YR SPEAKER 8OHM 1W
085G6118 1 SHIELD
E089B 089G 725CAA DB D-SUB
089G417A15N IS POWER CORD
095G801416XH59 WIRE HARNESS 16P-12P 180MM
095G8018B2X504 LVDS CABLE 20P-14P 100MM
0M1G 330 4120 SCREW 42A9930008
0M1G 330 4120 SCREW 42A9930008
0M1G 330 6 47 CR3 SCREW 42-D005390
0M1G1140 6120 SCREW
0M1G1730 6120 SCREW
0Q1G 330 6120 SCREW 42A9930001
705GQ734397 15" REAR COVER ASS'Y
015G6204 1 HINGE-BKT
052G6025 11921 MYLAR
0Q1G 140 6120 SCREW
Q34G6199ABJ 5B REAR COVER(15")
705GQ734398 15" LCD STAND-BASE ASS'Y
033G4695 1 C CLAMP
M037 037G6033 1 HINGE
0Q1G1040 10120 SCREW
40
Q34G1546ABJ 1B STAND
Q34G6200ABJ 1B 33 BASE
705GQ734401 15" LCD BEZEL ASS'Y
033G4848 AS L KEY PAD
033G4849 1 LENS
Q34G6198ABJA1B 30 BEZEL(15")
750GLK50X2011N PANEL HT150X02-100 5611 BJ BOE
AM1G1740 10 47 CR3 SCREW
AUPC7QB8 AUDIO BOARD G2709-1-2-X-3-070723
CN202 033G802414C H 2*7PIN DUAL ROW RIGHT ANGLE H
U201 056G 616 1 IC E-TDA7496L ST
CN204 095G 825 3X501 WIRE HARNESS 3P(SCN)-3P 40MM
R207 061G 60210252T CFR 1K OHM +-5% 1/6W
R208 061G 60210252T CFR 1K OHM +-5% 1/6W
R201 061G 60218352T 18KOHM 5% 1/6
R203 061G 60218352T 18KOHM 5% 1/6
R210 061G 60220352T CFR 20K OHM+-5% 1/6W
R211 061G 60220352T CFR 20K OHM+-5% 1/6W
R202 061G 60220452T 200KOHM 5% 1/6W
R212 061G 60222452T 220KOHM 5% 1/6W
C204 064G178J104 0T 0.1UF 50V
C206 064G178J104 0T 0.1UF 50V
C211 065G 444102 5T 1000PF 10% 50V CERAMIC
C212 065G 444102 5T 1000PF 10% 50V CERAMIC
C203 065G 450104 7T 0.1UF +80-20% 50V Y5V
C210 067G 2151007NT KY50VB10M-TP5 5*11.5
C213 067G215Y1097NT EC 1.0UF 50V KY50VB1M-TP5 5*11MM
C209 067G215Y1097NT EC 1.0UF 50V KY50VB1M-TP5 5*11MM
715G2709 1 2 AUDIO BOARD PCB
Q90G6258 2 HEAT SINK
CBPC7KM5N1Q CONVERSION BOARD FOR 15"LCD
CN404 033G801714A BH CONNECTOR
CN701 033G8027 12 WAFER 2*6P 2.0MM R/A
CN101 033G8027 14 H WAFER 14P 2.0MM DIP
CN403 033G8027 16 WAFER 16PIN 2.0MM DIP
040G 457624 1B LABEL-CPU
040G 45762412B CBPC LABEL
C408 067G215V100 7R LOW E.S.R 10UF +/-20% 50V
C418 067G215V100 7R LOW E.S.R 10UF +/-20% 50V
C717 067G215V100 7R LOW E.S.R 10UF +/-20% 50V
41
C707 067G215V101 4N KY25VB100M-CC3(6.3*11)
C710 067G215V101 4N KY25VB100M-CC3(6.3*11)
C712 067G215V101 4N KY25VB100M-CC3(6.3*11)
C703 067G305S1013HV 100UF +-20% 16V
C403 067G305V479 7 4.7UF 20% 50V 105 度
C702 067G305V479 7 4.7UF 20% 50V 105 度
CN405 088G 35315F H D-SUB 15PIN
U401 090G6250 1 GP HEAT SINK
X401 093G 22 53 H 14.31818MHZ/30PF/49US
U401 056G 562100 TSUM16AK
U702 056G 563 7 IC AIC1084-33PMTR-R AIC
U701 056G 563 25 IC A1C1084-33PETR-R AIC
U404 056G1133 34 M24C02-WMN6TP
U403 056G1133 56 M24C16-WMN6TP
U402 056G1133 79 PM25LV512-25SCE SOP-8
Q402 057G 417 4 PMBS3904/PHILIPS-SMT(04)
Q702 057G 417 17 T PZT2907A
Q704 057G 763 1 A03401 SOT23 BY AOS(A1)
R730 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R722 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R720 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R432 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R431 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R421 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R419 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
FB412 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R476 061G0603100 1F RST CHIPR 1 KOHM +-1% 1/10W
R411 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R418 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R420 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R427 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
42
R428 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R429 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R441 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R442 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R443 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R445 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R453 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R454 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R488 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R704 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R701 061G0603102 RST CHIP 1K 1/10W 5%
R447 061G0603102 RST CHIP 1K 1/10W 5%
R446 061G0603102 RST CHIP 1K 1/10W 5%
R430 061G0603102 RST CHIP 1K 1/10W 5%
R444 061G0603103 RST CHIPR 10 KOHM +-5% 1/10W
R409 061G0603121 RST CHIPR 120 OHM +-5% 1/10W
R414 061G0603121 RST CHIPR 120 OHM +-5% 1/10W
R448 061G0603222 RST CHIPR 2.2 KOHM +-5% 1/10W
43
R403 061G0603390 0F RST CHIPR 390 OHM +-1% 1/10W
R437 061G0603471 RST CHIPR 470 OHM +-5% 1/10W
R705 061G0603472 RST CHIPR 4.7KOHM +-5% 1/10W
R702 061G0603510 RST CHIPR 51 OHM +-5% 1/10W
R434 061G0603560 RST CHIPR 56 OHM +-5% 1/10W
R435 061G0603560 RST CHIPR 56 OHM +-5% 1/10W
R436 061G0603560 RST CHIPR 56 OHM +-5% 1/10W
R438 061G0603750 RST CHIPR 75 OHM +-5% 1/10W
R439 061G0603750 RST CHIPR 75 OHM +-5% 1/10W
R440 061G0603750 RST CHIPR 75 OHM +-5% 1/10W
C417 065G0603104 32 CHIP 0.1UF 50V X7R
C416 065G0603104 32 CHIP 0.1UF 50V X7R
C415 065G0603104 32 CHIP 0.1UF 50V X7R
C414 065G0603104 32 CHIP 0.1UF 50V X7R
C413 065G0603104 32 CHIP 0.1UF 50V X7R
C412 065G0603104 32 CHIP 0.1UF 50V X7R
C411 065G0603104 32 CHIP 0.1UF 50V X7R
C419 065G0603104 32 CHIP 0.1UF 50V X7R
C420 065G0603104 32 CHIP 0.1UF 50V X7R
C422 065G0603104 32 CHIP 0.1UF 50V X7R
C718 065G0603104 32 CHIP 0.1UF 50V X7R
C715 065G0603104 32 CHIP 0.1UF 50V X7R
C714 065G0603104 32 CHIP 0.1UF 50V X7R
C713 065G0603104 32 CHIP 0.1UF 50V X7R
C711 065G0603104 32 CHIP 0.1UF 50V X7R
C709 065G0603104 32 CHIP 0.1UF 50V X7R
C706 065G0603104 32 CHIP 0.1UF 50V X7R
C444 065G0603104 32 CHIP 0.1UF 50V X7R
C441 065G0603104 32 CHIP 0.1UF 50V X7R
44
C440 065G0603104 32 CHIP 0.1UF 50V X7R
C439 065G0603104 32 CHIP 0.1UF 50V X7R
C430 065G0603104 32 CHIP 0.1UF 50V X7R
C429 065G0603104 32 CHIP 0.1UF 50V X7R
C428 065G0603104 32 CHIP 0.1UF 50V X7R
C427 065G0603104 32 CHIP 0.1UF 50V X7R
C426 065G0603104 32 CHIP 0.1UF 50V X7R
C424 065G0603104 32 CHIP 0.1UF 50V X7R
C401 065G0603104 32 CHIP 0.1UF 50V X7R
C404 065G0603104 32 CHIP 0.1UF 50V X7R
C405 065G0603104 32 CHIP 0.1UF 50V X7R
C406 065G0603104 32 CHIP 0.1UF 50V X7R
C407 065G0603104 32 CHIP 0.1UF 50V X7R
C409 065G0603104 32 CHIP 0.1UF 50V X7R
C410 065G0603104 32 CHIP 0.1UF 50V X7R
C708 065G0603105 12 CHIP 1UF 16VX7R 0603
C421 065G0603220 31 CER1 0603 NP0 50V 22P PM
C423 065G0603220 31 CER1 0603 NP0 50V 22P PM
C443 065G0603221 32 CHIP 220PF 50V X7R
C425 065G0603224 32 CHIP 0.22UF 50V X7R
C442 065G0603330 32 CHIP 33PF 50V NPO
C432 065G0603473 32 CHIP 0.047UF 50V X7R
C433 065G0603473 32 CHIP 0.047UF 50V X7R
C434 065G0603473 32 CHIP 0.047UF 50V X7R
C435 065G0603473 32 CHIP 0.047UF 50V X7R
C436 065G0603473 32 CHIP 0.047UF 50V X7R
C437 065G0603473 32 CHIP 0.047UF 50V X7R
C438 065G0603473 32 CHIP 0.047UF 50V X7R
FB407 071G 56K121 M CHIP BEAD
FB401 071G 56Z601 CHIP BEAD 600 OHM 0805
FB409 071G 59B121 TB160808B
D412 093G 39147SEM ZMM5V6ST
45
D407 093G 64 42 P BAV70 SOT23 BY PAN JIT
D702 093G 6432P LL4148
D701 093G 6432P LL4148
D403 093G 6433P BAV99
D404 093G 6433P BAV99
D405 093G 6433P BAV99
D401 093G 39S 45 T DIODE ZENER RLZ36B ROHM
D402 093G 39S 45 T DIODE ZENER RLZ36B ROHM
D704 093G1004 4 SMAL140
715G1558 4 2 MAIN BOARD PCB
KEPC560KEAP KEY BOARD
CN003 033G3802 2H WAFER 2P RIGHT ANGLE
CN004 033G3802 2H WAFER 2P RIGHT ANGLE
CN001 033G8027 12 H PIN HEADER 2*6 R/A
SW001 077G 600 1GCJ TACT SWITCH TSPB-2 -NP
DP101 081G 12 1 GP LED GP32032M/R003-ZY-33
CN002 088G 30211K PHONE JACK 5PIN
R102 061G 60275052T 75OHM 5% 1/6W
R101 061G 60275052T 75OHM 5% 1/6W
715G1496 4 KEY BOARD PCB
PWPC1521SVE1P POWER BOARD
CN302 033G3278 3 3P PLUG B3B-XHA/JST
CN201 033G8020 2D U WAFER
CN202 033G8020 2D U WAFER
040G 45762412B CBPC LABEL
IC902 056G 139 7 1 IC EL817MA M-TYPE
IC901 056G 379 77 IC LD7552BPN DIP-8
Q903 057G 724 4 MOSFET 2SK2996
Q209 057G 761 6 2SC5706-P-E
Q210 057G 761 6 2SC5706-P-E
NR901 061G 58080 WT 8 OHM NCT
R903 061G152M104 64 100KOHM 5% 2W
C904 063G107K474 US 0.47UF +-10%
C213 063G210J2242AC FILM CAP 0.22UF J 250V
46
C906 065G 2K152 5E6921 1500 PF 10% 2KV Y5P
C215 065G 6J2206E3 R 22PF J 6KV NP0
C216 065G 6J2206E3 R 22PF J 6KV NP0
C901 065G305M1022BP Y2 1000PF M 250VAC Y5P
C902 065G305M1022BP Y2 1000PF M 250VAC Y5P
C913 065G306M4722BP 4700PF +-20% 400VAC
C922 067G215S1023KV 105℃ 1000UF M 16V
C925 067G215S1023KV 105℃ 1000UF M 16V
C201 067G215Y4713RV LOW E.S.R 470UF +-20% 16V
C924 067G215Y4713RV LOW E.S.R 470UF +-20% 16V
C926 067G215Y4713RV LOW E.S.R 470UF +-20% 16V
C905 067G215Z10115K ELCAP 100UF M 450V
L202 073G 174 30YSA FILTER
L904 073G 253 91 H CHOKE COIL
L903 073G 253 91 H CHOKE COIL
L201 073G 253139 SA CHOKE COIL
L902 073L 174 26T1G LINE FILTER 27MH
PT201 080LL15T 7DNG X'FMR
F901 084G 7H200 SL 250V/2A LIHEL FUSE
CN301 088G 30229C PHINE JACL
BD901 093G 50460509 2KBP06M 2A 600V
D912 093G3006 1 31DQ06FC
CN102 095G8021 12520 WIRE HARNESS
705G 560 61 09 R919 ASS'Y (ROHS)
R919 061G 2J39858G 0.39 OHM 5% 2W
096G 29 6 H.S. TUBE
705G 780 57 02 CN901 ASS'Y
CN901 087G 501 12 CJ AC SOCKET
095G205S354022 HARNESS
096G 29 6 H.S. TUBE
705G 780 57 06 D910 ASS'Y (ROHS)
D910 093G3010 1 A 31DQ10
Q90G 410 4 HEAT SINK
U201 056G 622 1 BA9741F-SMT
Q202 057G 760 4B PDTA144WK SOT346
Q201 057G 760 5B PDTC144WK SOT346
Q203 057G 763 3 AO4411 SO-8
R208 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
R929 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
RJ901 061G0603000 RST CHIPR 0 OHM +-5% 1/10W
47
R218 061G0603101 RST CHIPR 100 OHM +-5% 1/10W
R931 061G0603102 RST CHIP 1K 1/10W 5%
R216 061G0603221 RST CHIPR 220 OHM +-5% 1/10W
R236 061G0603511 RST CHIPR 510 OHM +-5% 1/10W
R234 061G0603911 RST CHIPR 910 OHM +-5% 1/10W
R927 061G0805102 RST CHIPR 1KOHM +-5% 1/8W
R928 061G0805102 RST CHIPR 1KOHM +-5% 1/8W
R940 061G0805221 RST CHIPR 220 OHM +-5% 1/8W
R926 061G0805240 1F RST CHIPR 2.4KOHM +-1% 1/8W
R925 061G0805360 1F RST CHIPR 3.6KOHM +-1% 1/8W
R912 061G1206101 100 1206
R901 061G1206105 1M 1206
R902 061G1206105 1M 1206
R904 061G1206105 1M 1206
R905 061G1206105 1M 1206
C399 065G0603471 32 CHIP 470PF 50V X7R
C398 065G0603471 32 CHIP 470PF 50V X7R
C205 065G0805104 22 0.1UF +-10% 25V X7R 080
C202 065G0805104 22 0.1UF +-10% 25V X7R 080
48
C936 065G0805104 32 CHIP 0.1U 50V X7R
C928 065G0805104 32 CHIP 0.1U 50V X7R
C927 065G0805104 32 CHIP 0.1U 50V X7R
C910 065G0805104 32 CHIP 0.1U 50V X7R
C225 065G0805105 27 CHIP 1UF Y5V 0805
C219 065G0805105 27 CHIP 1UF Y5V 0805
C211 065G0805105 27 CHIP 1UF Y5V 0805
C209 065G0805105 27 CHIP 1UF Y5V 0805
C203 065G0805105 27 CHIP 1UF Y5V 0805
C208 065G0805331 31 CHIP 330PF 50V NPO
C940 065G0805471 31 CHIP 470PF 50V NPO
C221 065G0805474 27 CHIP 0.47UF 25V Y5V
D203 093G 39S 3 T BZT52-C11
ZD904 093G 39S 19 T PTZ7.5B
ZD901 093G 39S 23 T GLZ22B
D201 093G2004 3 SSM24PT
CN901 006G 31500 EYELET
NR901 006G 31502 1.5MM RIVET
L902 006G 31502 1.5MM RIVET
C905 006G 31502 1.5MM RIVET
PT201 006G 31502 1.5MM RIVET
T901 006G 31502 1.5MM RIVET
IC903 056G 158 4 T H431BA
Q207 057G 414 2 MPS3906
Q205 057G 417 3 T MPS3904
Q902 057G 419 PP T 2PC945P
Q901 057G 420 PP T 2PA733P
R917 061G 17210052T 100HM 5% 1/4W
R930 061G 17210152T 100 OHM 5% 1/4W
R918 061G 17210352T CFR 10KOHM +-5% 1/4W
R908 061G 17268952T 6.8OHM 5% 1/4W
R920 061G 20747052T 47 OHM 1/2W
R922 061G 20747052T 47 OHM 1/2W
R220 061G 60218352T 18KOHM 5% 1/6
R205 061G 60247352T 47KOHM 5% 1/6W
R201 061G 60275352T 75KOHM 5%1/6W
C911 064G700J1020AT 1000PF 50V PEN
C204 064G700J1040AT 0.1UF 50V PEN
C909 064G700J1040AT 0.1UF 50V PEN
C908 065G 450104 7T 0.1UF +80-20% 50V Y5V
49
C921 065G517K102 5T6921 1000PF +-10% 500V Y5P
C920 065G517K102 5T6921 1000PF +-10% 500V Y5P
C907 067G 2152207NT KY50VB22M-TP5 5*11
C207 067G 2154797NT LOW ESR 4.7UF+-20% 50V BY CHEM
FB903 071G 55 19 T FERRITE BEAD D9X3. 5X0.8
FB901 071G 55 29 FERRITE BEAD
ZD903 093G 3957652T GDZJ5.1B BY PANJIT
ZD902 093G 3958352T ZENER GDZJ13B BY PANJIT
D901 093G 6026W52T FR107
D902 093G 6038P52T PS102R
D903 093G 64 1152T 1N4148
D209 093G 64 1152T 1N4148
D207 093G 64 1152T 1N4148
D205 093G 64 1152T 1N4148
715G1034 1 AO POWER BOARD PCB
T901 S80LL17T2VGW TRANSFORMER ASS'Y
Q07G 7 T132 PALLET
Q07G 7 T133 PALLET
Q07G 7 T200 COMPOUND PALLET
Q07G 7 T207 COMPOUND PALLET
Q15G6203 E 1 PANEL BRACKET
Q15G6203 E 2 PANEL BRACKET
Q40G 15N61530A RATING LABEL
Q40G000260811A BASIC LABEL
Q40G0002615A24 POP LABEL
Q41G780A61524A QSG
Q44GF582615 4A CARTON
Q45G 76 34 5 R PE BAG FOR BASE
Q45G 88607 R PE BAG FOR MONITOR
040G 58162435A LABEL
041G780061537A TCO'03 CARD
045G 76 28 RN PE BAG FOR MANUAL/BASE
089G 17356C554 AUDIO CABLE
Q70G500A615 1A CD MANUAL
50
12. Different Parts List
Diversity of T57VM5DCA7A2AN compared with T57KM5DCA7A2AN
Location Part No. Description
015G6203 S 1 PANEL-BKT
052G 1211536 ALUMINUM FOIL TAPE
E750 750GLD5010T11N PANEL SVA150XG10TB A SH SVA
705G 780 57 02 CN901 ASS'Y
U402 056G1133716(LW3M5P5EAQ2) IC PM25LV512A-100SCE SOIC-8
D406 093G 39147 TZMC5V6
D408 093G 39147 TZMC5V6
D409 093G 39147 TZMC5V6
D410 093G 39147 TZMC5V6
D411 093G 39147 TZMC5V6
D412 093G 39147 TZMC5V6
095G205S354022 HARNESS
Diversity of T57VM5DMA7JBAN compared with T57KM5DCA7A2AN

040G 58160811A GREEN DOT LABEL
040G 58162461A EPA LABEL
089G410A18N IS POWER CORD 32E1818020
Q33G4848ABJ 1L KEY PAD
CBPC7VM5N1Q MAIN BOARD FOR 15"LCD
PWPC1521SVE1P POWER BOARDG1034-1-AO-X-1-070226
L202 073G 174 30 HA FILTER
Q52G 1185 65 AOC MIDDLE TAPE
Q26G 800504 2 BAR CODE LABEL
51
Diversity of T57VM5NCA7GGAN compared with T57KM5DCA7A2AN
E08902 089G 728CAA DB D-SUB
089G402A18N IS POWER CORD
PWPC1521SVE1P POWER BOARD G1034-1-AO-X-1-070226
L202 073G 174 30 HA FILTER
Q44G3582615 4A 15 LCD AOC CTN
Q52G 1185 65 AOC MIDDLE TAPE
Q26G 800504 2 BAR CODE LABEL
Diversity of T57VM5DCA7SPAN compared with T57KM5DCA7A2AN

Location Part No. Description Remark
040G 58162461A EPA LABEL
089G404A18N IS POWER CORD/32E1818018
E750 750GLD5010T21N PANEL SVA150XG10TB REV.B SH SVA 2nd source
U402 056G1133716 LW3M5P5EAQ2 IC PM25LV512A-100SCE SOIC-8
L202 073G 174 30 HA FILTER
Q52G 1185 99 BIG CARTON TAPE FOR AOC
Q26G 800504 2 BARCODE LABEL FOR 3
52
Diversity of T57VMWNCA7A4AN compared with T57KM5DCA7A2AN

Location Part No. Description Remark
050G 600 2 HANDLE1
050G 600 3 HANDLE2
052G6020 2 PROTECT FILM
705GQ834564 15" LCD REAR COVER ASS'Y
Q34G6199ABJ 1B REAR COVER(15")
Q34G6198ABJB1B 2 BEZEL(15")
E750 750GLD5010T21N PANEL SVA150XG10TB REV.B SH SVA 2nd source
U402 056G1133716 LW3M5P5EAQ2 IC PM25LV512A-100SCE SOIC-8
L202 073G 174 30 HA FILTER
Q44GF582600 1A 15 LCD CARTON
Q41G5000615A51 MANUAL
53

Aoc 156sa

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aoc 156sa

Uploaded by

Copyright:

Available Formats

15" LCD Color Monitor AOC 156Sa

FOR PRODUCTS CONTAINING LASER:

Driving system TFT Color LCD

Size 38.0cm (15.0")

Pixel pitch 0.297mm (H) x 0.297mm (V)

LCD Panel Viewable angle(CR≥10) 160°(H) 160°(V) (CR>5)

Response time (type) 8 ms

Display Color 16.2M

Contrast Ratio 500:1

White Luminance 250cd/m2

Sync. Type H/V TTL

Input Connector D-Sub 15pin

Input Input Video Signal Analog:0.7Vp-p(standard),75 OHM, Positive

H-Frequency 30kHz – 60kHz

Dot Clock 80MHz

Max. Resolution 1024 x 768 (75 Hz)

Plug & Play VESA DDC2BTM

Power Source 100~240VAC,50~60Hz

Dimensions(with base) 354 mm (H) x348.8 mm (W) x164.8 mm (D)

Weight (monitor only) Monitor only: 2.8kg

Operating Temp: 5°C to 35°C

Monitor Block Diagram

Power board Main Board RS232 Connector

(Include: adapter, inverter) For white balance

AC-IN Video signal, DDC

3. Power Button & Indicator 4. Volume / +

5. MENU / ENTER 6 Earphone

•Power Button & Indicator:

• Volume / +: Increase volume or adjust function.

• Volume / -: Decrease volume or adjust function.

• Auto Adjust button :

Main Menu Sub Menu

Contrast Contrast from Digital-register.

Brightness Backlight Adjustment

Adjust Picture Phase to reduce Horizontal-Line

H. Position Adjust the horizontal position of the picture.

V. Position Adjust the vertical position of the picture.

Cool N/A Recall Cool Color Temperature from EEPROM.

Recall sRGB Color Temperature from

User / Red Red Gain from Digital-register.

User / Green Green Gain Digital-register.

User / Blue Blue Gain from Digital-register.

Yes Auto Adjust the H/V Position, Focus and Clock

H. Position Adjust the horizontal position of the OSD.

OSD Setup V. Position Adjust the vertical position of the OSD.

OSD Timeout Adjust the OSD timeout.

Show the resolution, H/V frequency and input

Clear each old status of Auto-configuration and

No N/A Do not execute reset, return to main menu.

Exit N/A N/A Exit OSD

Pin No. Description Pin No. Description

2. Green Video 10. VGA-CON

3. Blue Video 11. N.C.

VGA connector layout

4.2 Factory Preset Display Modes

720 x 400 31.47 70.0

640 × 480 31.47 60.0

1024 × 768 48.363 60.0

XGA 1024 × 768 56.476 70.0

4.3.1 Display Characteristics

Back Light Unit:

2) Is the EPROM blank?

3) Program the EPROM by default values.