SH6 & SH8 SERIES PTOS

PARTS LIST AND SERVICE MANUAL

U.S. Pat. 6,073,502

Muncie Power Products, Inc. General Offices and Distribution Center • P.O. Box 548 • Muncie, IN 47308-0548
(765) 284-7721 • FAX (765) 284-6991 • E-mail info@munciepower.com • Web site http://www.munciepower.com
Drive Products, Inc., Toronto, Exclusive Agents for Canada
 SH6 & SH8 SERIES PTO
EXPLODED VIEW

2 MUNCIE POWER PRODUCTS, INC. Rev. 10-00

 PARTS LIST AND DESCRIPTION
ITEM QTY PART NO. DESCRIPTION ITEM QTY PART NO. DESCRIPTION
1 1 03T37911 Input Gear A6805 (26/18) 24 1 01T37965 Housing 6-Bolt “3” (F84)
03T37980 Input Gear A6807 (30/23) [req 23M60270] 1 01T37966 Housing 6-Bolt “1” (F84)
03T37067 Input Gear C6112 (20/30) 1 01T37074 Housing 8-Bolt “3”
03T37652 Input Gear C7009 (23/26) 1 01T37075 Housing 8-Bolt “1”
03T37068 Input Gear C7012 (25/30) 25 1 06T36892 Output Shaft “B” & “I”
03T37984 Input Gear F1012 (42/30) 1 06T37088 Output Shaft “G” Dana Special
03T37985 Input Gear F1013 (42/32) 1 06T36893 Output Shaft “K” “V”
03T37156 Input Gear F1107 (42/23) 1 06T37090 Output Shaft “Q” “S”
03T37157 Input Gear F1113 (42/32) 1 06T37089 Output Shaft “P”
03T37147 Input Gear F6107 (21/23) 1 06T37372 Output Shaft “C” “X” “2”
03T37086 Input Gear F6307 (24/23) 1 06T37336 Output Shaft “T”
03T37087 Input Gear F6312 (24/30) 26 1 26T01627 Woodruff Key
03T38195 Input Gear F7005 (26/18)
27 1 28T36546 Hyd. Flange Spacer (I,K,Q,S,P)
03T38194 Input Gear F7007 (26/23)
03T37741 Input Gear F8405 (28/18) 28 1 12T36751 O Ring
03T37742 Input Gear F8407 (28/23) 29 1 11T37790 Output Shaft Seal
03T37743 Input Gear F8409 (28/26)
30 1 15T34576 “B” Bearing Cap
03T37331 Input Gear I8405 (34/18) 14T36836 “I” Hyd Flange
03T37332 Input Gear I8407 (34/23) 14T39137 “G” Hyd Flange
03T37070 Input Gear M6505 (26/18) 14T35537 “K” & “P” Hyd Flange
03T37058 Input Gear M6507 (26/23) 14T39141 “Q” & “T” Hyd Flange
03T37059 Input Gear M6509 (26/26) 14T35464 “S” Hyd Flange
03T37060 Input Gear M6512 (26/30) 14T37779 “V” Hyd Flange
03T37061 Input Gear S6007 (21/23) 30a 1 18T36864 Spacer (“I” Only)
03T37062 Input Gear S6807 (26/23) 21T20092 Washer “C” “2”
03T37063 Input Gear S6809 (26/26) 30b 1 49T36833 Coupler (“I” Only)
03T37064 Input Gear S6812 (26/30) 14T37357 “C” Comp. Flange
03T37158 Input Gear S6813 (26/32) 14T37378 “2” Comp. Flange
03T37065 Input Gear S7009 (24/26) 30c 19T38266 Capscrew “C” “2” “X”
03T37069 Input Gear U6005 (24/18) 31 4 19T33233 Hex Capscrew “B”
03T37038 Input Gear U6807 (24/23) 32 4 19T34462 Socket Capscrew “K” “P” “V”
03T37039 Input Gear U6809 (24/26) 4 19T39257 Socket Capscrew “G” “Q” “S” “T”
03T37040 Input Gear U6812 (24/30)
4 19M84478 Socket Capscrew “I”
03T37041 Input Gear U6813 (24/32)
33 1 25T35724 Cap Plug “G” “K” “Q” “S” “V”
2 2 10T35776 Bearing
(Storage Only)
3 1 18T35781 Spacer, Shim (.122/.125) 25T35725 Cap Plug “P” (Storage Only)
18T36229 Spacer, Shim (.135/.132)
34 2 19T36174 Set Screw
18T36230 Spacer, Shim (.130/.127)
4 4 19T35237 Capscrew 35 4 25T21684 Pipe Plug (As Needed)
5 1 15T36717 Cover 36 1 13T34022 Insp. Cover Gasket
6 1 11T36124 Seal 37 1 16T33999 Inspection Cover
7 1 24T36894 Snap Ring 38 4 19T34028 Capscrew
8 1 12T34003 O Ring 39 1 13M13541 Allison Gasket .031 (U60)
9 2 10T21017 Bearing 1 13M35091 Gasket .010 6-Bolt
1 13M35092 Gasket .020 6-Bolt
10 2 24T35480 Snap Ring
2 13M35151 Gasket .010 8-Bolt
11 2 21T29017 Thrust Race 2 13M35152 Gasket .020 8-Bolt
12 1 10T36285 Bearing 40 1 43T37385 Orifice Fitting (P-Special Option)
13 1 02T36769 Output Gear 05 (38) 41 2 26T37992 Dowel Pin (F84 Only)
02T36770 Output Gear 07 (33)
02T36771 Output Gear 09 (30) N.S. 1 SH6-GSK Gasket Kit
02T36772 Output Gear 12 (26) Includes: (1)6, (1)8, (1)17, (2)18, (2)21,
02T36773 Output Gear 13 (24) (1)28, (1)29, (1)36, (1)13M35091,
(1)13M35092
14 1 02T37707 Clutch Gear
N.S. 1 SH8-GSK Gasket Kit
15 1 27T37709 Spring Includes: (1)6, (1)8, (1)17, (2)18,
16 1 49T37708 Piston (2)21, (1)28, (1)29, (1)36,
17 1 12T36868 O Ring (1)13M35151, (1)13M35152
18 2 12T36471 O Ring N.S. 1 SH6-RBK Rebuild Kit
Includes: (2)2, (1)3, (1)6, (1)7, (1)8,
19 1 49T37710 Piston Cup (2)9, (2)10, (2)11, (1)12, (1)15, (1)17,
20 1 24T36470 Snap Ring (2)18, (1)20, (2)21, (1)28, (1)29,
21 2 12T35774 O Ring (1)36, (1)13M35091, (1)13M35092
22 1 07T37071 Idler Shaft N.S. 1 SH8-RBK Rebuild Kit
Includes: (2)2, (1)3, (1)6, (1)7, (1)8,
23 1 19T35785 Set Screw (2)9, (2)10, (2)11, (1)12, (1)15, (1)17,
24 1 01T37072 Housing 6-Bolt “3” (2)18, (1)20, (2)21, (1)28, (1)29,
1 01T37073 Housing 6-Bolt “1” (1)36, (1)13M35151, (1)13M35152

Rev. 10-00 MUNCIE POWER PRODUCTS, INC. 3

 MODEL NUMBER CONSTRUCTION
SH 8S — U68 12 — A 1 B X
PTO Type Special Feature
SH X — None
P — Pressure Lube
Mounting R — Pulse Generator/
SAE 6 Bolt Std. Mount — 6S No Pressure Lube
SAE 6 Bolt Std. - Metric — 6B S — Pulse Generator/
SAE 6 Bolt Deep - Metric — 6C Pressure Lube
SAE 6 Bolt Deep Mount — 6D
SAE 6 Bolt Deep Mount w/o Stud Kit — 6K Output Type
SAE 6 Bolt Std. Mount w/o Stud Kit — 6L B — 1-1/4 Round 5/16 KW
SAE 8 Bolt Std. Mount — 8S C — 1410 Companion Flange
SAE 8 Bolt Std. - Metric — 8B G — Special
SAE 8 Bolt Deep - Metric — 8C
I — DIN 5462
SAE 8 Bolt Deep Mount — 8D
K — SAE “B” 2 & 4 Bolt
SAE 8 Bolt Deep Mount w/o Stud Kit — 8K
SAE 8 Bolt Std. Mount w/o Stud Kit — 8L P — SAE “BB” 2 & 4 Bolt
Q — SAE “A” 2 Bolt
S — SAE “B” 2 Bolt
Trans. SH Gear Data T — SAE “A” 3/4" 11 Spl. 2 Bolt
Aisin 8.46P 20°PA Spur — I84 V — SAE “B” 2 & 4 Bolt
Allison 6.88P 20°PA Spur — A68 X — 1.3-21 Spline
Clark 6.1P 25°PA 32.28° LH — C61 2 — DIN Companion Flange
Clark 7P 25°PA 30.78° LH — C70 Assembly Arrangement
Fuller 1.01P 20°PA Spur — F10
1
Fuller 1.01P 21.5°PA Spur — F11 3
Fuller 6.1P 20.5°PA 29° LH — F61
Fuller 6.35P 20°PA 22° LH — F63 Shifter Type
Fuller 6.1P 23°PA 26° LH — F70 A — Manual Air
Fuller 8.38P 18°PA 33.1° LH — F84 E — Electric/Air (12 Volt)
Mack 6.48P 17.65°PA Spur — M65 F — Electric/Air (24 Volt)
Spicer 6P 17.5°PA 28.7° LH — S60
Spicer 6 or 6/8P 20°PA Spur Deep Dish— S68
Spicer 7P or 17.5°PA 28.07° LH — S70
Universal 6P 20°PA Spur — U60 PTO ASSEMBLY ARRANGEMENTS
Universal 6 or 6/8P 20°PA Spur — U68

Speed Ratio
05 — .47:1
07 — .70:1
09 — .87:1
12 — 1.15:1
13 — 1.33:1 (8 Bolt Only)

NO.1 ASSEMBLY NO. 3 ASSEMBLY

OUTPUT LOAD RATINGS

SPEED TORQUE HP TORQUE KW *WEIGHT*
RATIO LBS.FT. @1000 RPM NM @1000 RPM LB. (KG)

05 400 76 542 57 51 (23.2)

07 400 76 542 57 51 (23.2)
09 375 71 508 53 51 (23.2)
12 325 62 441 46 51 (23.2)
13 325 62 441 46 51 (23.2)

*APPROXIMATE SHIPPING WEIGHT. ADD 1 LB. (.45 KG) FOR HYDRAULIC ASSEMBLY

4 MUNCIE POWER PRODUCTS, INC. Rev. 10-00

 SH6 & SH8 INSTALLATION KITS
SH SERIES ELECTRIC/AIR SHIFT SYSTEM ITEM QTY PART NO. DESCRIPTION
KIT NO. 48TK3958 12V ELECTRIC AIR SHIFT 1 1 36MA1005 Switch Bracket
Connect Directly to Air Tank.
2 1 36M01007 Face Plate
Do Not Use Hose or Tubing. 3 1 30T35687 Rocker Switch 12v
To Lube Tap 4 1 33T36299 Fuse Assembly
Required on 5 1 35M30692 Solenoid Valve 12v
Automatic 6 1 30T37954 Pressure Switch
Transmissions 7 1 31M15759 Pressure Protection Valve
8 1 44MB2164 Pipe Nipple
9 1 34T36941 Wiring Pigtail
10 3 44MB6844 Male Connector
11 1 44MB6842 Male Connector
# 12 1 25T21684 Pipe Plug (Use As Req.)
13 3 34M18250 Female Spade Connector
14 2 34M18009 Ring Terminal
15 12 37M18000 Electric Wire 12ft
18 1 43T37385 Orifice Fitting (“P” Special Option)
Parts Included with PTO (Not packaged in Kit No. 48TK3958):
16 1 45M44430 Air Tubing 30ft
Parts Included with PTO (“P” Special Option):
17 1 45M4R536 Lube Hose Ass’y (“P” Special Option)
##
For 24V Electric/Air Kit No. 48TK3959, Substitute:
* Ground to Frame 3 1 30T35712 Rocker Switch 24v
# Solenoid to be mounted in engine compartment out of direct spray of road contaminants. 5 1 35M31692 Solenoid Valve 24v
## Green Light to turn “ON” when PTO switch is activated.

SH SERIES MANUAL AIR SHIFT SYSTEM ITEM QTY PART NO. DESCRIPTION
KIT NO. 48TK3926 MANUAL AIR SHIFT – 12V LIGHT 1 1 32M12001 Light Assembly 12v
2 1 33T36299 Fuse Assembly
3 1 35M18653 Air Valve
Connect Directly to Air Tank. 4 1 30T37954 Pressure Switch
To Lube Tap
Do Not Use Hose or Tubing. Required on 5 1 31M15759 Pressure Protection Valve
Automatic 6 1 44MB2164 Pipe Nipple
Transmissions 7 1 34T36941 Wiring Pigtail
8 1 44MB6942 Fitting - Elbow
9 2 44MB6842 Male Connector
10 1 44MB6844 Male Connector
11 1 25T21684 Pipe Plug
12 2 34M18009 Ring Terminal
13 12 37M18000 Electric Wire 12ft
14 3 34T36362 Closed End Crimp
N.S. 1 36MA1004 Dash Bracket
N.S. 1 36M01005 Face Plate
N.S. 1 36MK1007 Bolt Kit
17 1 43T37385 Orifice Fitting (“P” Special Option)
Parts Included with PTO (Not packaged in Kit No. 48TK3926):
15 1 45M44430 Air Tubing 30ft
18 1 44MB2252 Street Tee

* ## Parts Included with PTO “P” Special Option:

* Ground to Frame
## Red Light to turn “ON” when 16 1 45M4R536 Lube Hose Ass’y (“P” Special Option)
PTO switch is activated.
For 24V Electric/Hydraulic Kit No. 48TK3929, Substitute:
1 1 32M24001 Light Assembly 24v

Rev. 10-00 MUNCIE POWER PRODUCTS, INC. 5

 IN INCHES (MM) SH6 & SH8 DIMENSIONS IN INCHES (MM)

SH6N HOUSING DIMENSION

SH6G HOUSING OPTION
“B” OR “K” SHAFT ONLY.
SH6/8S HOUSING DIMENSION NO DRAG BRAKE.

STANDARD 1-1/4" ROUND KEYED SHAFT (“B” OPTION)

Optional Pump
Bolt Kit
19MK4717
Sold Separately.

SPECIAL 7/8" - 13 SPLINE (“G” OPTION) S.A.E. “A” 2-BOLT 7/8" - 13 SPLINE (“Q” OPTION)

1410 SERIES COMPANION FLANGE (“C” OPTION) S.A.E. “B” 2 & 4 BOLT 7/8" - 13 SPLINE (“K” OPTION)

S.A.E. “B” 2-BOLT 7/8" - 13 SPLINE (“S” OPTION) DIN 100 COMPANION FLANGE (“2” OPTION)

S.A.E. “B-B” 2 & 4 BOLT 1"-15 SPLINE (“P” OPTION) S.A.E. “B” 2 & 4 BOLT 7/8" - 13 SPLINE (“V” OPTION)

S.A.E. “A” 2-BOLT 3/4" - 11 SPLINE (“T” OPTION)

6 MUNCIE POWER PRODUCTS, INC. Rev. 10-00

 SH6 & SH8 ASSEMBLY INSTRUCTIONS
FOR PROPER INSTALLATION AND ADJUSTMENT OF THE TAPERED INPUT BEARINGS
1. Lubricate the bearings and races with lithium
based bearing grease.
2. Place the input bearing into the input gear and
slide this group into the housing to line up the
idler shaft.
3. Tap the idler shaft into the housing and
through both bearing races.
4. Tap the idler shaft in the reverse direction so that it is flush
with the bearing in this assembly. Insert the thickest shim
that can be installed by hand in the gap between the bearing STEP 2 STEP 3
and the housing. Rotate the input gear to ensure it is not
excessively tight or loose. Recommended bearing pre-load is
.002 loose to .006
loose. Note the loca- Shim Nominal Tolerance
tion of the Shim in 18T35781 .124 .122/.125
Step 4 of the diagram
is on the opposite 18T36230 .129 .127/.130
side of the gear than 18T36229 .134 .132/.135
the set screw. 18T37151 .139 .137/.140
5. Tap the idler shaft 18T37152 .144 .142/.145
into position and 18T37153 .149 .147/.150
install the set screw. STEP 4 STEP 5

SH6 & SH8 SERIES PTO

The SH6 & SH8 Series PTO offers several

output shaft choices to accommodate
popular pump assemblies. The compact size
and high torque capability of the SH PTO permits
direct mounting pumps which previously
required remote mount.
The SH Series PTO is available with pulse
generator pick-up for use with the Muncie digital
tachometer 38MK2000 (request MP92-04).
Contact your Muncie Application Specialist
for assistance with this option.

Rev. 10-00 MUNCIE POWER PRODUCTS, INC. 7

 MOUNTING KITS

43TK3934 HOSE KIT (STANDARD) LUBE HOSE KITS

ITEM QTY PART NUMBER DESCRIPTION
1 1 45M4R536 Hose Assembly Std.
2 1 43M05522 Elbow

6-BOLT MOUNTING KIT 8-BOLT MOUNTING KIT

20MK6601 STANDARD (SH6S, SH6D)

ITEM QTY PART NUMBER DESCRIPTION
1 6 20M38150 Stud 20MK8800 STANDARD (SH8S, SH8D)
2 6 13M18018 Copper Washer
3 6 21MX3802 Lock Tab ITEM QTY PART NUMBER DESCRIPTION
4 6 22MX3824 Nut 1 6 19M44138 capscrew
20MKM602 METRIC (SH6B, SH6C) 2 2 20M44175 Stud
3 8 21ML4375 Lockwasher
1 6 20M39040 Stud
4 2 22MX4420 Nut
2 6 13M18018 Copper Washer
3 6 21MX3802 Lock Tab 20MKM802 METRIC (SH8B, SH8C)
4 6 22MX3824 Nut 2 8 20M47055 Stud
20MKM603 METRIC (SH6B-A6807) 3 8 21ML4375 Lockwasher
4 8 22MX4420 Nut
1 6 20M39045 Stud
2 6 13M18018 Copper Washer
3 6 21MX3802 Lock Tab
4 6 22MX3824 Nut
20TK4074 METRIC (SH6B, I84)
1 6 20T37990 Stud
2 6 13M18018 Copper Washer
3 6 21MX3802 Lock Tab
4 6 22MX3824 Nut
20TK4046 METRIC (SH6F, F84)
1 6 20M39040 Stud
2 6 13M18018 Copper Washer
3 6 21MX3802 Lock Tab
4 6 22MX3824 Nut
N.S. 1 13M51717 Locktite GSK Elim
N.S. 1 MC99-06 Inst. Card

uncie Muncie Power Products, Inc. General Offices and Distribution Center • P.O. Box 548 • Muncie, IN 47308-0548
Po er (765) 284-7721 • FAX (765) 284-6991 • E-mail info@munciepower.com • Web site http://www.munciepower.com
Products Drive Products, Inc., Toronto, Exclusive Agents for Canada
SP97-01 (Rev. 10-00) Printed in the U.S.A.
© Muncie Power Products, Inc. 2000