Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    En LF Drivers 10nw64 8

    Uploaded by

    Paulo Viana

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    En LF Drivers 10nw64 8

    Uploaded by

    Paulo Viana
    3 views3 pages

    Original Title

    en-lf-drivers-10nw64-8

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views3 pages

    En LF Drivers 10nw64 8

    Uploaded by

    Paulo Viana

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    10NW64 8Ω

    LF Drivers - 10.0 Inches

    600 W continuous program power capacity


    64 mm (2.5 in) copper voice coil
    60 - 2500 Hz response
    96 dB sensitivity
    Neodymium magnet allows a very light yet
    powerful motor assembly
    Shorting copper cap for extended HF response
    Ventilated voice coil gap for reduced power
    compression

    B&C Speakers s.p.a.

    Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
    10NW64
    LF Drivers- 10.0 Inc hes

    SPECIFICATIONS DESIGN PARAMETERS 4

    Nominal Diameter 250 mm (10.0 in) Surround Shape Double Roll Resonance Frequency 59 Hz

    Nominal Impedance 8Ω Cone Shape Exponential Re 5.2 Ω

    Minimum Impedance 6.5 Ω Magnet Material Neodymium Inside Slug Qes 0.27

    Nominal Power Handling1 300 W Spider Single Qms 4.3

    Continuous power handling2 600 W Pole Design Straight Pole Qts 0.26

    Sensitivity (1W/1m)3 96.0 dB Woofer Cone Treatment Vas 22.0 dm 3 (0.78 ft3)
    TWP Waterproof Both Sides
    Frequency Range 60 - 2500 Hz Sd 320.0 cm 2 (49.6 in2)
    Recommended Enclosure 26.0 dm 3 (0.92 ft3)
    Voice Coil Diameter 64 mm (2.5 in) η₀ 1.6 %
    Recommended Tuning 59 Hz
    Winding Material Copper Xmax ± 6.0 mm

    Former Material Glass Fibre Xvar ± 5.5 mm

    Winding Depth 16.0 mm (0.62 in) Mms 47.0 g

    Magnetic Gap Depth 8.0 mm (0.31 in) Bl 18.3 Txm

    Flux Density 1.25 T Le 0.65 mH

    EBP 218 Hz

    MOUNTING AND SHIPPING INFO SERVICE KIT

    Overall Diameter 261 mm (10.28 in) Recone kit RCK10NW648

    Bolt Circle Diameter 245 mm (9.6 in)

    Baffle Cutout Diameter 230.0 mm (9.1 in)

    Depth 113 mm (4.4 in)

    Flange and Gasket Thickness 13 mm (0.5 in)

    Air Volume Occupied by Driver


    1.5 dm 3 (0.05 ft3)

    Net Weight 2.95 kg (6.5 lb)

    Shipping Units 1

    Shipping Weight 3.55 kg (7.83 lb)

    Shipping Box
    295x314x175 mm (11.61x12.36x6.89 in)

    B&C Speakers s.p.a.

    Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
    1. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
    2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
    3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
    4. Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.

    B&C Speakers s.p.a.

    Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com

    You might also like