Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

4 - Key Products

Download as pdf or txt
Download as pdf or txt
You are on page 1of 63

Connectivity that matters

Alfred Tharwat, RCDD


Head of Business Dev. & Presales

Middle East Turkey & Africa


Development of data transmission speed

Experience shows
▪ 10GBase-T will be
predominant in LAN
▪ 40GBase-X will be state of the 25GBase-T 40GBase-T
10GBase-T
art in DC Access Layer
▪ 100GBase-X will be state of 1000 MHz 1600 MHz
400 MHz
the art in the DC core layer ▪
Cat.6A
Cat.6A / Cat.8.1 Cat.8.1

Wireless technology will drive


up LAN bandwidth demand TR 11801-9905
(WAP, DAS (5G)) PL distance: 24 m
PL distance: 90m PL distance: PL distance: 24m
estimated 50m
DTR 11801-9909
Cat. 8 Applications

Data Center LAN

▪ Top of Rack or End of Row ▪ 3 Zones depending on length


▪ No expensive MPO or QSFP cables ▪ Future proof installation
▪ Easy migration, standard RJ45 cords ▪ WLAN, 4k/8k UHD applications
PL length distribution in LAN

▪ PL length
distribution based on
120k R&Mfreenet
Cat.6A warranted
links
▪ 50m link length
would cover over
60% of the installed
base ▪
24m Zone

Use case with one telecom room shows 30% of workspace and 75% of WAP
are covered in 24m/40G range…
50m Zone

…and 95% of workspace as well as 100% of WAP are within the 50m/25G
range. Only a few workspaces are left in the 10GB area.
Two Telecom Rooms

However, if two telecom rooms are available 58% of workspace and 100% of WAP are within
the 24m/40G range whereas 100% of workspace is in the 50m/25G range.
Cat. 8 Permanent Link
Measurements
▪ Two connector model, shielded only
▪ Different length models between TIA and ISO/IEC

ISO / IEC TIA R&M recommendation

Permanent Link 5m – 26m Max. 24m 5m – 24m


Sum patch cords 2m – 4m Max. 6m 2m – 4m
Electrical Channel length Max. 32m Max. 32m Max. 32m
RJ45 connection module positioning
Guaranteed performance

NGBase-T (2.5G / 5G) requires defined ANEXT performance


* Unshielded Cat.5e & Cat.6 connectivity support next higher speed level,
if installation conditions of cable support ANEXT requirements
Cat. 8 Permanent Link
Key Benefits
▪ Based on R&M’s iF award-winning Cat. 6A design
▪ Installer friendly with improved design to ensure
maximum permanent link
▪ 2 in 1: Angled or straight
▪ Wire Cutting Blade
▪ Fully backward compatible using the RJ45
interface
▪ 3 speed zones for LAN - 24m/40GB/s,
50m/25GB/s and 90m/10GB/s.
▪ PowerSafe with IDC inside (up to PoE Level 3, 55
watts)
PRIME-ODF
The next generation Optical Distribution Frame
PRIME-ODF – SCM-ODF vs. MCM-ODF

SCM-ODF (FOXS) ▪MCM-ODF (PRIME)


Based on a SCM tray system ▪Based on a MCM tray system
▪ High packing density
▪ Fiber separation and subscriber scalability
▪ Compact units
▪ Separation of splice- and patch
▪ Smart Fiber management
▪ More safety and overview in fiber administration

Main field of application ▪Main field of application


FTTH Networks and Access networks ▪Back bone, City-Ring, Datacenter
PRIME-ODF – Modularity concept
PRIME-MCM-trays PRIME-Basic Inlay ¾U-PRIME-Unit 3U-PRIME-Sub-rack

19”- Street Cabinet 19”-Cabinet PRIME-ETSI-Cabinet

ETSI-Cabinet Accessoies
PRIME-ODF - Basic concept 3U-Sub-rack
PRIME-Fiber inlay ¾U-PRIME-MODULE

PRIME-FTU (Fiber Termination Unit)


PRIME-24 x Crimp 24/48x HS
3U-PRIME-Sub-rack
PRIME-MCM-Tray

PRIME-24 x Crimp (ANT)


PRIME-36 x Crimp (DC)
PRIME-FBU (Fiber Break Unit)

PRIME-24/48 x HS
PRIME-FOU (Fiber Overlength Unit)
PRIME-ODF - Basic concept 3U-Sub-rack
PRIME-ODF - Basic concept 3U-Sub-rack
PRIME-3U Sub-rack (SR)
▪ Mounting depth 260mm

▪ Mounting possibilities
− R&M ETSI Rack
− 19ʺ rear (FIST)
− 19 ʺ front

▪ Capacity
− Up to 4 pcs. ¾ U PRIME Units

− Up to 192 SC, 144 E-2000 or 96/(192) LC-D


(UHD) adapters

− Pure Splice solution max. density up to 384


splices connections

− Splice-and Patch solution up to 144/192


(BFF) or 192/384 (SFF) fiber connections
PRIME-ETSI Cabinet 900/1200x300x2200mm
Cable management concept ▪Up to 5376 Fiber ▪Up to 2660 Fiber
connections connections

▪1200x300x2200mm ▪900x300x2200mm
▪Recommended ▪Recommended
▪1500x300x2200mm ▪1200x300x2200mm
PRIME-ODF – Applications
Fiber units positions

▪1)

▪2)

▪3)

▪4)

▪1) Operation (closed)

▪2) Patch (no fiber movement)

▪3) Maintenance (minimal fiber movement)

▪4) Splice (complete open)


Netscale
120 - BCM - 72 - 48
Netscale Overview

▪ Next generation cabling infrastructure focused on Data Centers

▪ Complete portfolio for end-to-end solutions within the Data Network as well as the SAN

• Netscale 120 – Optimized on space consumption achieving the highest port density
available on the market (>5000 ports per rack)

• Netscale BCM – The platform solution for cabling of modular switches

• Netscale 72 – Optimized on handling of pre-terminated and splice cabling

• Netscale 48 – Copper, Fiber, pre-terminated and splice cabling


Netscale Family Overview

Netscale 120 Netscale BCM Netscale 72 Netscale 48

Fiber Fiber Fiber Fiber & Copper

Direct & Patch Interconnect Patch & Splice Patch & Splice

Mid-size & big Mid- small size


Data Center, in conjunction with Mid-size & big
Data Center Data Center & structured
modular switches Data Center
Micro & Edge DC cabling
Netscale 120

▪Densest platform
Feature R&M ▪Up to 67% higher port density
60 / 80
Density
90 / 120

AIM ✓ 60 / 80 ▪Only intelligent UHD platform


Quick release jumper ✓

Jumper diameter 1.4 mm ▪One of three push-pull connectors


Rear cable management ✓

Insert, RCM
▪Smallest diameter patch cord
Documentation
(Front door) for improved cable management
▪Neat cable management
Slack management.
▪Row numbering
▪Rear documentation
N120 – 1U

▪ Up to 5 inserts
(cassette or module)

– 90 ports

▪ Front tray ~55 mm frontwards moveable

▪ Inserts can be installed or removed from front


and rear

▪ Front cable manager included, rear cable


manager optional

▪ Translucent front door


N120 – 3U

▪ Up to 20 inserts
(cassette or module)

– 360 ports
▪ Moveable front tray
(same as 1U)

▪ Inserts can be installed or removed


from front and rear

▪ Front cable manager included, rear


cable manager optional

▪ Translucent front door


Netscale 72 at a Glance

Simplicity with only one platform for Base-12 and Base-8


Best-in-Class density with 72 ports per U independent of configuration and connectivity
Automated documentation and visual guidance of patch work orders thanks to inteliPhy
Split tray feature allows each half of the tray to be pulled out independently,
protecting connections from disruption, meaning increased uptime and reliability
Superior patch cord and trunk management
Best documentation opportunities
Metal chassis with 3 layers
• Each layer composed of 2 drawers
• Each drawer can be Base-8 or Base-12
Integrated front cable manager
• Bend radius limiter
• Cable guiding
• Front door hinges
Netscale 72 Cable Routing

Cable cover and documentation area part of the front of the drawers
• Patch cords are well protected and guided, but still easy to handle

Trunk cables and legs are fully guided and protected


Netscale 72 Splice

Splice tray
• 12 SC simplex (12 splices)
• 12 LC duplex (24 splices)
• 12 MPO-12 (12 ribbon splices)
Splice
• Heat shrink
• ANT
• Ribbon
Tube clamp with superior strain relief
• Minicore cables
• Tubes of loose tube cables
• Mini-breakout cables
Netscale 72 Side & Rear Cabling

Useable in server and network racks


Supporting top and bottom installation
Supporting side (left or right) or rear cabling
Supporting cabinets from 800 … 1000mm (telescopic sliders)
R&M divider holder or cable ties

Parts
• 2 brackets for side cabling
• 1 bracket for rear cabling
• 2 holders for cabling brackets
Netscale 48 System Overview
Netscale 48 housing Netscale 48 housing angled

Technical overview
Netscale 48 housing
Straight housing
Angled housing

Netscale 48 Cassette Netscale 48 RJ45 unshielded Netscale 48 RJ45 shielded

6 * RJ45 shielded or unshielded;


6 * LC duplex; 6 * SC; 6 * E-2000®
6 * MPO;
Netscale 48 LC Netscale 48 SC Netscale 48 E2000®

Netscale 48 Splice cassette


6 * LC duplex; 6 * SC; 6 * E-2000®

Netscale 48 Module MPO-LC Splice Cassettes Netscale 48 module


Netscale 48 Overview

▪Panel

Slide in module, cassette concept, from the rear

For copper and fiber modules and cassettes

Straight and angled version


2 rows with 8 cassettes with 48 ports
Integrable front cable management using
two different lengths for straight only

Blind Cover (with labelling area)


Netscale 48 Cable Routing

Front Cable Manager (FCM) options

Optional front cable manager and door for straight panel


Patch cords are well protected and guided but still easy to handle

Front Cable Manager (FCM)


80mm for FO and occasional Cu
100mm for FO / Cu mix
Integrated inteliPhy support ▪80mm with ▪80mm FO / ▪100mm
cuttable inner occasional Cu Copper / Mix
bar
Netscale 48 Cu Cassette

Cu Cassette options

6x RJ45 module shielded «special» (DA)


▪Netscale 48 RJ45 shielded
6x RJ45 module unshielded «special» (DA)

EL or ISO module

Cat. 6, Cat. 6A and Cat. 8.1

Shielded cassette is made available in trunk VC


▪Netscale 48 RJ45 unshielded
for preassembled trunk cables
Netscale 48 FO Cassette

Cassettes
SC 6 Ports => 6 fibers
LC-Duplex 6 Ports => 12 fibers
E-2000® 6 Ports => 6 fibers
MPO 6 Ports => 72 fibers up to 144 fibers or more

▪Netscale 48 LC ▪Netscale 48 SC ▪Netscale 48 E2000®

Cables and legs are fully guided and protected


Netscale 48 FO Modules

Modules
Modules with LC-Duplex front and MPO at rear
Inside:
Fanout MPO to LC
Base-12 (6 ports)
Universal polarity S+
(trunk gives the polarity)
Unique serial number for tracking and access to test reports
Netscale 48 Splice Cassette

Splice drawer
12 SC simplex (12 splices)
12 LC duplex (24 splices)
12 MPO-12 (12 ribbon splices)
Splice
Heat shrink
ANT
Ribbon
Tube clamp with superior strain relief
Minicore cables
Tubes of loose tube cables
Mini-breakout cables
Netscale 48 Rear Cable Support (RCS)

Robust material with


elegant finish
Adjustable position with
slider
Suitable for optional cable
guides or cable clips
Suitable for cable ties
Suitable for Velcro with anti-
slip teeth
Quick and easy mounting to
Netscale 48 patch panel
For Vertical and Horizontal Slots

The Netscale BCM fits into standard 19" racks

Netscale BCM 2U Netscale BCM 0U

Up to 12 slots with 32x/48x LC-duplex ports each Up to 12 slots with 32x/48x LC-duplex ports each

For vertical switch slots For horizontal switch slots


Cable Management per Switch Slot
▪inteliPhy net
▪Monitoring - Documentation
inteliPhy net
Standard Plus Pro
Designed for simplicity ✓ Visualization ✓ All Standard ✓ All Plus features
(Floors, Racks, features
• Intuitive Equipment, …) ✓ Integration with
✓ Alerts inteliPhy Monitor
• Little Training (AIM)
✓ Cabling ✓ Capacity
• Simple pricing
Management
✓ Reporting
Full feature set ✓ Work Order
Management
• Asset Management
• Capacity Management
• Connectivity Management
• Change Management
• Reporting
Graphical User Interface

100% Browser-
based, no
installation on
Client required
Multiple interfaces
Multiple windows
within interfaces
Flexible
combination of all
required
information
Geographical View

Hierarchy Tree
Floorplans and
maps
Data Centers
and Office
Buildings
Multi-Site
Connectivity Trace

End-to-End connectivity display per port or per device


Synopsis View

Dynamic, configurable Network view


Customizable search and reporting

Built-in Report Generator


Lists and Queries
Charts, Dashboards
Export
Model Library

R&M Library
• Panels and modules
• Racks and cabinets
Outlets
• Active Equipment
(Switches, Servers,
Peripherals)
• Easy search by
name, type, vendor
Built-in Model Editor
• "Request a Model" Service
• Custom fields (e.g. Asset Tag, IP Address, MAC Address, VLAN Tag)
Export and Import

Rapidly import existing


documentation into
model
Bulk updates
Standard Microsoft
Excel format
User Management

Many concurrent users

User Groups share


same permissions

Access restrictions
based on queries
Interface to external
directories (LDAP)
Asset Management

Availability insights on
rack space,
power outlets on rack
PDU,
power capacity at rack,
network ports
with media and connector
match
Capacity Management

Quick search
for available
rack space
Alerts

Use queries to continuously supervise data center resources


One-off or repetitive supervision
Monitor rack space, stock levels and others
Workflow Managements

Plan changes on inteliPhy net


Split in individual tasks
Gantt charts
Print work orders
Supervise execution
Automated Infrastructure Management

Automatically recognize connections


Controlled changes with Work Orders and guidance at the patch panel
Alerts on unsolicited changes with exact fault location for immediate restoration
«Connectivity that matters»

Alfred Tharwat, RCDD


Head of Business Development & Presales

Reichle & De-Massari MEA FZE


JBC3, office 3602/3603, JLT
54281 Dubai | UAE
Phone +971 4 236 8761
Mobile +971 50 150 4013
E-mail Alfred.tharwat@rdm.com
Web www.rdm.com

You might also like