GATE 2017 CE Syllabus

GATE 2017 CE Syllabus
The Graduate Aptitude Test in Engineering (GATE) is an all-India

examination that is conducted jointly by IISc and seven IITs. GATE has emerged as
one of the benchmark tests for engineering and science. It facilitates in admissions
for higher education (M.Tech. /Ph.D.) in IITs, IISc, and various other Institutes in
India. The increasing importance of GATE has led to an increase in the number of
candidates appearing for it. A mammoth 9.5 lakh candidates appeared for GATE
2016. Many foreign Universities have also started accepting GATE scores. The GATE
paper comprises of two sections - General Aptitude and Core Subject. GATE 2017
General Aptitude Syllabus is common for all papers whereas the core subject section
varies depending on your paper. This article provides information on GATE 2017 CE
Syllabus.
GATE 2017 CE Syllabus

GATE 2017 CE Syllabus has been divided into 7 sections. The different topics of each
section of GATE 2017 CE Syllabus are provided below.
Section 1: Engineering Mathematics
Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and
Eigen vectors.
Calculus: Functions of single variable; Limit, continuity and differentiability; Mean

value theorems, local maxima and minima, Taylor and Maclaurin series; Evaluation
of definite and indefinite integrals, application of definite integral to obtain area and
volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector
identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss
and Green’s theorems.
Ordinary Differential Equation (ODE): First order (linear and non-linear)

equations; higher order linear equations with constant coefficients; Euler-Cauchy
1|Page
equations; Laplace transform and its application in solving linear ODEs; initial and
boundary value problems.
Partial Differential Equation (PDE): Fourier series; separation of variables;

solutions of one-dimensional
diffusion equation; first and second order one-dimensional wave equation and two-
dimensional Laplace equation.
Probability and Statistics: Definitions of probability and sampling theorems;

Conditional probability; Discrete Random variables: Poisson and Binomial
distributions; Continuous random variables: normal and exponential distributions;
Descriptive statistics - Mean, median, mode and standard deviation; Hypothesis
testing.
Numerical Methods: Accuracy and precision; error analysis. Numerical solutions

of linear and non-linear algebraic equations; Least square approximation, Newton’s
and Lagrange polynomials, numerical differentiation, Integration by trapezoidal and
Simpson’s rule, single and multi-step methods for first order differential equations.
Section 2: Structural Engineering
Engineering Mechanics: System of forces, free-body diagrams, equilibrium

equations; Internal forces in structures; Friction and its applications; Kinematics of
point mass and rigid body; Centre of mass; Euler’s equations of motion; Impulse-
momentum; Energy methods; Principles of virtual work.
Solid Mechanics: Bending moment and shear force in statically determinate

beams; Simple stress and strain relationships; Theories of failures; Simple bending
theory, flexural and shear stresses, shear centre; Uniform torsion, buckling of
column, combined and direct bending stresses.
Structural Analysis: Statically determinate and indeterminate structures by force/

energy methods; Method of superposition; Analysis of trusses, arches, beams, cables
and frames; Displacement methods: Slope deflection and moment distribution
methods; Influence lines; Stiffness and flexibility methods of structural analysis.
2|Page
Construction Materials and Management: Construction Materials: Structural
steel -composition, material properties and behaviour; Concrete - constituents, mix
design, short-term and long-term properties; Bricks and mortar; Timber;
Bitumen.Construction Management: Types of construction projects; Tendering and
construction contracts; Rate analysis and standard specifications; Cost estimation;
Project planning and network analysis - PERT and CPM.
Concrete Structures: Working stress, Limit state and Ultimate load design
concepts; Design of beams, slabs, columns; Bond and development length;
Prestressed concrete; Analysis of beam sections at transfer and service loads.
Steel Structures: Working stress and Limit state design concepts; Design of
tension and compression members, beams and beam- columns, column bases;
Connections - simple and eccentric, beam-column connections, plate girders, and
trusses; Plastic analysis of beams and frames.
Section 3: Geotechnical Engineering
Soil Mechanics: Origin of soils, soil structure and fabric; Three-phase system and
phase relationships, index properties; Unified and Indian standard soil classification
system; Permeability - one-dimensional flow, Darcy’s law; Seepage through soils -
two-dimensional flow, flow nets, uplift pressure, piping; Principle of effective stress,
capillarity, seepage force and quicksand condition; Compaction in laboratory and
field conditions; Onedimensional consolidation, time rate of consolidation; Mohr’s
circle, stress paths, effective and total shear strength parameters, characteristics of
clays and sand.
Foundation Engineering: Sub-surface investigations - scope, drilling bore holes,

sampling, plate load test, standard penetration and cone penetration tests; Earth
pressure theories - Rankine and Coulomb; Stability of slopes - finite and infinite
slopes, method of slices and Bishop’s method; Stress distribution in soils -
Boussinesq’s and Westergaard’s theories, pressure bulbs; Shallow foundations -
Terzaghi’s and Meyerhoff’s bearing capacity
theories, effect of water table; Combined footing and raft foundation; Contact
pressure; Settlement analysis in sands and clays; Deep foundations - types of piles,
3|Page
dynamic and static formulae, load capacity of piles in sands and clays, pile load test,
negative skin friction.
Section 4: Water Resources Engineering
Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum, energy

and corresponding equations; Potential flow, applications of momentum and energy
equations; Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of
boundary layer and its growth.
Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes;

Dimensional analysis and hydraulic similitude; Kinematics of flow, velocity triangles;
Basics of hydraulic machines, specific speed of pumps and turbines; Channel
Hydraulics - Energy-depth relationships, specific energy, critical flow, slope profile,
hydraulic jump, uniform flow and gradually varied flow.
Hydrology: Hydrologic cycle, precipitation, evaporation, evapotranspiration,

watershed, infiltration, unit hydrographs, hydrograph analysis, flood estimation and
routing, reservoir capacity, reservoir and channel routing, surface run-off models,
ground water hydrology - steady state well hydraulics and aquifers; Application of
Darcy’s law.
Irrigation: Duty, delta, estimation of evapotranspiration; Crop water requirements;

Design of lined and unlined canals, head works, gravity dams, and spillways; Design
of weirs on a permeable foundation; Types of irrigation systems, irrigation methods;
Water logging and drainage; Canal regulatory works, cross-drainage structures,
outlets and escapes.
Section 5: Environmental Engineering
Water and Waste Water: Quality standards, basic unit processes, and operations
for water treatment. Drinking water standards, water requirements, basic unit
operations and unit processes for surface water treatment, distribution of water.
Sewage and sewerage treatment, quantity and characteristics of wastewater. Primary,
secondary and tertiary treatment of wastewater, effluent discharge standards.
4|Page
Domestic wastewater treatment, quantity of characteristics of domestic wastewater,
primary and secondary treatment. Unit operations and unit processes of domestic
wastewater, sludge disposal.
Air Pollution: Types of pollutants, their sources and impacts, air pollution
meteorology, air pollution control, air quality standards and limits.
Municipal Solid Wastes: Characteristics, generation, collection and

transportation of solid wastes, engineered systems for solid waste management
(reuse/ recycle, energy recovery, treatment, and disposal).
Noise Pollution: Impacts of noise, permissible limits of noise pollution,

measurement of noise and control of noise pollution.
Section 6: Transportation Engineering
Transportation Infrastructure: Highway alignment and engineering surveys;

Geometric design of highways - cross-sectional elements, sight distances, horizontal
and vertical alignments; Geometric design of railway track; Airport runway length,
taxiway, and exit taxiway design.
Highway Pavements: Highway materials - desirable properties and quality

control tests; Design of bituminous paving mixes; Design factors for flexible and rigid
pavements; Design of flexible pavement using IRC: 37-2012; Design of rigid
pavements using IRC: 58-2011; Distresses in concrete pavements.
Traffic Engineering: Traffic studies on flow, speed, travel time - delay and O-D
study, PCU, peak hour factor, parking study, accident study and analysis, statistical
analysis of traffic data; Microscopic and macroscopic parameters of traffic flow,
fundamental relationships; Control devices, signal design by Webster’s method;
Types of intersections and channelization; Highway capacity and level of service of
rural highways and urban roads.
Section 7: Geomatics Engineering
5|Page
Principles of surveying; Errors and their adjustment; Maps - scale, coordinate
system; Distance and angle measurement - Levelling and trigonometric levelling;
Traversing and triangulation survey; Total station; Horizontal and vertical curves.
Photogrammetry - scale, flying height; Remote sensing - basics, platform, and
sensors, visual image interpretation; Basics of Geographical information system
(GIS) and Geographical Positioning system (GPS).
Liked this GATE 2017 CE Syllabus? Read more!
General Aptitude Syllabus with Sample Questions
Best Books on General Aptitude for GATE
GATE 2017 Exam Dates
Opportunities through GATE 2017 Exam
6|Page

GATE 2017 CE Syllabus

Uploaded by

Copyright:

Available Formats

GATE 2017 CE Syllabus

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GATE 2017 CE Syllabus

Uploaded by

Copyright:

Available Formats

GATE 2017 CE Syllabus

The Graduate Aptitude Test in Engineering (GATE) is an all-India

GATE 2017 CE Syllabus

Section 1: Engineering Mathematics

Calculus: Functions of single variable; Limit, continuity and differentiability; Mean

Ordinary Differential Equation (ODE): First order (linear and non-linear)

Partial Differential Equation (PDE): Fourier series; separation of variables;

Probability and Statistics: Definitions of probability and sampling theorems;

Numerical Methods: Accuracy and precision; error analysis. Numerical solutions

Section 2: Structural Engineering

Engineering Mechanics: System of forces, free-body diagrams, equilibrium

Solid Mechanics: Bending moment and shear force in statically determinate

Structural Analysis: Statically determinate and indeterminate structures by force/

Section 3: Geotechnical Engineering

Foundation Engineering: Sub-surface investigations - scope, drilling bore holes,

Section 4: Water Resources Engineering

Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum, energy

Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes;

Hydrology: Hydrologic cycle, precipitation, evaporation, evapotranspiration,

Irrigation: Duty, delta, estimation of evapotranspiration; Crop water requirements;

Section 5: Environmental Engineering

Municipal Solid Wastes: Characteristics, generation, collection and

Noise Pollution: Impacts of noise, permissible limits of noise pollution,

Section 6: Transportation Engineering

Transportation Infrastructure: Highway alignment and engineering surveys;

Highway Pavements: Highway materials - desirable properties and quality

Section 7: Geomatics Engineering

Liked this GATE 2017 CE Syllabus? Read more!

General Aptitude Syllabus with Sample Questions

Best Books on General Aptitude for GATE

GATE 2017 Exam Dates

Opportunities through GATE 2017 Exam

You might also like