Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    Rivet

    Uploaded by

    Sharpeye Drive

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Rivet

    Uploaded by

    Sharpeye Drive
    5 views1 page

    Original Title

    rivet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views1 page

    Rivet

    Uploaded by

    Sharpeye Drive

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Stainless Thin Large Flange Rivet-Nuts

    Highest resistance to vibration and spin-out of all round bodied inserts. Flange with near flush
    finish. Very wide grip range. Low torque required to install.

    Material: 304 Stainless Steel

    Thread Size Part Code Grip Range Hole Size A B C D Pull-Out Push-Out Maximum
    (min) (min) Torque
    mm mm mm mm mm mm KN KN Nm

    M4 IN-YLF04-2.0SS 0.50 - 2.00 6.75 6.73 11.5 9.90 0.80 8.30 4.50 4.90

    M5 IN-YLF05-3.3SS 0.50 - 3.30 7.60 7.52 12.9 10.5 0.80 12.0 5.50 9.80

    IN-YLF06-4.2SS 0.70 - 4.20 10.0 9.91 15.7 12.7 1.00 22.0 7.50 15.5
    M6
    IN-YLF06-6.6SS 4.20 - 6.60 10.0 9.91 18.3 12.7 1.00 22.0 7.50 15.5

    IN-YLF08-3.8SS 0.70 - 3.80 13.5 13.46 18.5 17.4 1.00 34.0 11.5 49.0
    M8
    IN-YLF08-7.9SS 3.80 - 7.90 13.5 13.46 21.5 17.4 1.00 34.0 11.5 49.0

    IN-YLF10-3.8SS 0.70 - 3.80 13.5 13.46 18.5 17.4 1.00 34.0 11.5 –
    M10
    IN-YLF10-7.9SS 3.80 - 7.90 13.5 13.46 21.5 17.4 1.00 34.0 11.5 –

    Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple
    tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data.
    Revised September 2023

    Auckland 09 276 7021 | Christchurch 03 341 3320 | Free Phone 0800 748 832 | info@rivtec.co.nz | www.rivtec.co.nz

    You might also like