PROPOSED 3 STOREY RESIDENTIAL BUILDING W/ ROOFDECK

Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

STRUCTURAL DESIGN CRITERIA

I. GENERAL

A. Applicable Codes

Philippine National Structural Code for Buildings, Seventh Edition

(NSCP 2015)

Uniform Building Code (UBC) 1997 Edition

B. Structural Code and Standards

Building Code Requirements for Reinforced Concrete and Commentary

ACI – 318, 1995 Edition

Manual of Steel Construction – AISC, 9th Edition – (allowable stress)

II. DESCRIPTION OF STRUCTURAL SYSTEM

A. Foundation System

The foundation system shall consist of reinforced concrete isolated

footings supporting the structure. The said foundation is assumed to have
a soil bearing capacity of 11000 psf embedded at 1.50 m below natural
grade line.

B. Superstructure System

The structural system itself shall engage the use of special moment
resisting space frame (SMRF) which is basically a beam, column system.
Two – way and One – way slab system will be employed for the floor
system.

III. STRUCTURAL ANALYSIS & DESIGN

A. Computer Analysis

The lateral load shall employ the computer program for wind, seismic
and gravity loads.

Proposed Three Storey Residential Building w/ Roofdeck

Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

CFBI Design and Construction Services

PROPOSED 3 STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

STRUCTURAL DESIGN CRITERIA

B. Static Analysis

A static analysis will be performed to determine the design member

forces and displacements under the effects of wind and seismic forces in
the two orthogonal directions.

1. Wind Load

The wind forces are based on the provisions of NSCP for a basic
wind velocity of 260 kph. The overall and story drift under wind
load will be limited to 0.0025 H.

Load Combinations :

a) U = 1.2D ± 0.5W
b) U = 1.2D ± 1.0W +0.5L
c) U = 0.9D ± 1.0W

2. Static Seismic Loads

In accordance with the requirements of UBC and NSCP.

V = Cv I Wd (1/RT)
Where : Cv = Seismic Coefficient
I = Importance Factor
Wd = Total Seismic Dead Load
R= Numerical Coefficient
T= Elastic Fundamental Period

The overall and story drift under static earthquake forces will be
limited to 0.00333 H.

Load Combinations :

a) U = 1.2D ± 1.0E + 0.5L

b) U = 0.9D ± 1.0E

Proposed Three Storey Residential Building w/ Roofdeck

Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

CFBI Design and Construction Services

 PROPOSED 3 STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

STRUCTURAL DESIGN CRITERIA

IV. MATERIAL STRESSES

1. Concrete

a) Foundation 20.7 Mpa (3,000 psi)

b) Floor Slabs 20.7 Mpa (3,000 psi)

c) Beams & Columns 20.7 Mpa (3,000 psi)

2. Reinforcing Steel

a) Reinforcing deformed bars ASTM A615 Grade 40 (40 ksi)

For Ø12 and smaller.
ASTM A615 Grade 60 (60ksi)
For Ø 16 and larger.

b) Welded Wire Fabric ASTM A185

3. Structural Steel

a) Bearing Plates ASTM A36

b) Electrodes ASTM E70xx
c) Bolts ASTM E30
d) Anchor Bolts ASTM A354 Gr. BC

Proposed Three Storey Residential Building w/ Roofdeck

Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

CFBI Design and Construction Services

 PROPOSED 3 STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

STRUCTURAL DESIGN CRITERIA

V. LOAD ASSUMPTIONS

1. Dead Loads

A. TYPICAL FLOOR

a) Slab 2.35 KPa (50 psf)

b) Topping + Finish 1.20 KPa (25 psf)
c) Partitions 1.20 KPa (25 psf)
d) Ceiling + Utilities 0.24 KPa (5 psf)

B. ROOF LOADING

a) Roofing 0.48 KPa (10 psf)

b) Roof Framing 0.48 KPa (10 psf)
d) Ceiling + Utilities 0.24 KPa (5 psf)

2. Live Loads

a) Typical Floors 1.92 KPa (40 psf)

b) Stairs, Corridors, Lobbies 1.92 KPa (40 psf)
c) Roof 0.72 KPa (15 psf)
d) Toilets 1.92 KPa (40 psf)

3. Live Load Reductions (Per NSCP)

a) Floor Slabs No Reduction

b) Floor Beams & Girders per NSCP & UBC Codes
c) Roof Beams No Reduction
d) Columns 60% maximum
e) Foundation 60% maximum

Proposed Three Storey Residential Building w/ Roofdeck

Blk 8 Lot 2 Ph 2A Denmark St., Macaria Village, Biñan, Laguna

CFBI Design and Construction Services

 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: WINDLOAD Date: Sep-22-22 Date:
WIND LOAD for Roofing as per NSCP 2015 (Table 207B.2-1)
INPUT DATA:
Material Properties:
Risk Catergory IV Standard Occupancy Structures
Basic Wind Speed (V) 250 km/h ( 69.44 m/s )
Wind Direct. Factor (Kd) 0.85 (Table 207A.6-1)
Exposure Category B α=7.0, zg=365.76
Topographic factor (Kzt) 1 (Section 207A.8.2)
Gust Effect Factor (G) 0.85 (Section 207A.9)
Internal Pressure Coef. (Gcpi) ±0.18 Enclosed Buildings
Ridge Height 11.60 m
Eave Height 9.75 m } h = 10.67m

Building Breadth (B) 13.50 m (Normal to the Wind)

Building Length (L) 8.19 m (Parallel to the Wind)
Roof Type Monoslope

Output Results
Velocity Pressure Coef. (Kz) 0.73
Velocity Pressure (qz) 1.84 kPa
Roof Angle (Degree) 12.70°
Windward Coef. (WCp) -1.15 -0.18
Leeward Coef. (LCp) -0.64

Theoretical Wind Load

Windward Windload 1 -2.13 kPa
Windward Windload 2 -0.61 kPa
Leeward Windload 2 -1.34 kPa
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: WINDLOAD Date: Sep-22-22 Date:
WIND LOAD for Roofing as per NSCP 2015 (Table 207B.2-1)
INPUT DATA:
Material Properties:
Risk Catergory IV Standard Occupancy Structures
Basic Wind Speed (V) 250 km/h ( 69.44 m/s )
Wind Direct. Factor (Kd) 0.85 (Table 207A.6-1)
Exposure Category B α=7.0, zg=365.76
Topographic factor (Kzt) 1 (Section 207A.8.2)
Gust Effect Factor (G) 0.85 (Section 207A.9)
Internal Pressure Coef. (Gcpi) ±0.18 Enclosed Buildings
Ridge Height 10.82 m
Eave Height 9.75 m } h = 10.29m

Building Breadth (B) 7.93 m (Normal to the Wind)

Building Length (L) 3.50 m (Parallel to the Wind)
Roof Type Monoslope

Output Results
Velocity Pressure Coef. (Kz) 0.72
Velocity Pressure (qz) 1.82 kPa
Roof Angle (Degree) 17.03°
Windward Coef. (WCp) -0.89 -0.18
Leeward Coef. (LCp) -0.60

Theoretical Wind Load

Windward Windload 1 -1.70 kPa
Windward Windload 2 -0.61 kPa
Leeward Windload 2 -1.26 kPa
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: WINDLOAD Date: Sep-22-22 Date:
WIND LOAD for Roofing as per NSCP 2015 (Table 207B.2-1)
INPUT DATA:
Material Properties:
Risk Catergory IV Standard Occupancy Structures
Basic Wind Speed (V) 250 km/h ( 69.44 m/s )
Wind Direct. Factor (Kd) 0.85 (Table 207A.6-1)
Exposure Category B α=7.0, zg=365.76
Topographic factor (Kzt) 1 (Section 207A.8.2)
Gust Effect Factor (G) 0.85 (Section 207A.9)
Internal Pressure Coef. (Gcpi) ±0.18 Enclosed Buildings
Ridge Height 9.75 m
Eave Height 9.75 m } h = 9.75m

Building Breadth (B) 7.93 m (Normal to the Wind)

Building Length (L) 3.50 m (Parallel to the Wind)
Roof Type Monoslope

Output Results
Velocity Pressure Coef. (Kz) 0.71
Velocity Pressure (qz) 1.79 kPa
Roof Angle (Degree) 0.00°
Windward Coef. (WCp) -1.34 -0.18
Leeward Coef. (LCp) -0.70

Theoretical Wind Load

Windward Windload 1 -2.37 kPa
Windward Windload 2 -0.60 kPa
Leeward Windload 2 -1.39 kPa
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: Calc. by: SAC Checked by:
Subject: LC100x50x15x1.2 Date: 22-Sep-22 Revision:
DESIGN OF PURLINS AS PER AISI AND ASD

INPUT DATA
MATERIAL PROPERTIES TRIAL SECTION
Fy = 275.00 MPa Steel Yield Strength Select:
E = 200,000 MPa Steel Modulus of Elasticity
Fu = 345.00 MPa Sag rod Tensile Strength MEMBER PROPERTIES
H = 100.0 mm
GEOMETRY AND DIMENSIONS B = 50.0 mm
L = 3.00 m Truss Spacing D = 15.0 mm
S = 0.60 m Purlin Spacing t = 1.2 mm
a = 12.70 deg. Roof Slope R = 2.4 mm
n = 0 No. of Lines of Sag Rod
ds = 10 mm Diameter of Sag rod
B
w 3
LOADING DATA 2 2
DEAD LOADS: R d D
Sheathing/Acces. = 240.00 Pa 1
Wt. of Purlins = 2.08 kg/m t
c
LIVE LOAD: 4 r
H h
Roof live load = 720.00 Pa

WIND PRESSURE:
Uplift pressure = 2130.00 Pa 7
Normal pressure = 0.00 Pa
6 6
5
Purlin section with elements:
a) cross section
b) line element model

OUTPUT DATA
I.Properties of 90° corner (Elements 2 and 6)
r = 3.00 mm Corner radius
u = 4.71 mm Length of arc
c = 1.91 mm Distance of centroidal from center of radius
I'c = 4.02 mm3 I' of corner about its own centroidal axis

II. Nominal flexural strength (Mn) (Section C3.1.1)

A. Computation of Ix assuming web is fully effective
Assume f = Fy in the top fibers of the section.

Element 4: Web Element Full Depth When Assumed Fully Effective

h = 92.8 mm
h/t = 77.333 < 200, OK!, Sec. B1.2(a)

Element 1: Compression Lip

Section B3.1 Uniformly compressed unstiffened element
d = 11.40 mm d = D-(R + t}
ku = 0.43 k u = 0.43
l = 0.57 l = (1.052/sqrt(ku))(d/t)(sqrt(f/E)
< 0.673, d's = d
r = N.A. r = (1-(0.22/y))/y
d's = 11.40 mm
4
Is = 148.15 mm Is = d3t/12

Element 3: Flange Flat

w = 42.800 mm
w/t = 35.667 < 60, OK! Clause Bl.l(a)(l)
S = 34.519 S = 1.28*sqrt(E/Fy) Eq. B4-1
S/3 = 11.506 w/t > S
Ia = 256.76 mm4 min of 399t^4(((w/t)/S)-(sqrt(ku/4)))^3
t^4((115(w/t)/S)+5)
n = 0.333 n = (0.582-(w/t)/4S)>=1/3

Calculate buckling coefficients (k) and stiffener reduced effective width (ds):
ka = 3.50 ka = 5.25 -5(D/w) Eq. B4.2-8
C2 = 0.58 C2 = Is/Ia <= 1.0 Eq. B4.2-5
C1 = 1.42 C1 = 2 - C2 Eq. B4.2-6
k = 2.98 k = C2n(ka - ku)+ku Eq. B4.2-7
ds = 6.58 mm ds = C2d's Eq. B4.2-9

Section B2.1(a) Effective width of flange element 3 for load capacity

l = 0.81 l = (1.052/sqrt(ku))(w/t)(sqrt(f/E)
> 0.673, calculate rho
r = 0.81 r = (1-(0.22/y))/y
bf = 38.62 mm bf = rw
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: Calc. by: SAC Checked by:
Subject: LC100x50x15x1.2 Date: 22-Sep-22 Revision:
DESIGN OF PURLINS AS PER AISI AND ASD

Calculate second moment of area of effective section

Li is the effective length of all elements of type i, and yi is the distance from the top fiber:

Element Effective
yi Liyi Liyi2 I' Liycg2
no. length, Li
i (mm)
(mm) (mm2) (mm3) (mm3) (mm3)
1 6.58 6.89 45.32 3.12E+02 2.37E+01 1.77E+04
2 9.42 1.69 15.91 26.87 8.05 2.53E+04
3 38.62 0.60 23.17 13.90 0.00 1.04E+05
4 92.80 50.00 4,640.00 232.00E+03 66,598.23 2.49E+05
5 42.80 99.40 4,254.32 422.88E+03 0.00 1.15E+05
6 9.42 98.31 926.09 91,044.80 8.05 2.53E+04
7 11.40 90.70 1,033.98 93,781.99 123.46 3.06E+04
Sum 211.04 347.59 10,938.79 840.06E+03 6.68E+04 566.98E+03

Determine ycg from top fiber: w

ycg = 51.83 mm C1b/2 3 C2b/2 2
2
f f
ILy2 = 567.0E+03 mm3
f1 D f3
I'x = 339.8E+03 mm3 b1 R
c ds d
Ix = 407.8E+03 mm4 1
Sex = 7.87E+03 mm3 ycg 4

B. Check Web (Section B2.3) b2 8

f1 = 255.900 MPa
f2 = -236.457 MPa 9
y = -0.924 7
5
k = 22.093
f2
l = 0.619
< 0.673, d's = d 6
r = N.A. 6 B
be = 96.63 mm
b1 = 24.62 mm Bending stress with effective widths
b2 = 48.31 mm
bcw = 48.23 mm
b1+b2 = 72.94 mm > bcw48.23 mm, be = 72.94 mm

C. Iterate on web effective width

Try a value of the centroid position and iterate until convergence:

ycg = 46.516 mm ycg(new) = 46.516 mm ==> O.K.

D. Check Web (Section B2.3)

f1 = 253.717 MPa
f2 = -294.911 MPa
y = -1.162 y = f2/f1 Eq. B2.3-5
k = 28.546 k = 4+2(1-y)3+2(1-y) Eq. B2.3-4
l = 0.542 l = (1.052/sqrt(ku))(h/t)(sqrt(f/E)
< 0.673, d's = d
r = N.A. mm r = (1-(0.22/y))/y Eq. B2.1-3
be = 101.70 mm be = rh Eq. B2.1-2
b1 = 24.43 mm b1 = be/(3-y) Eq. B2.3-1
b2 = 50.85 mm b2 = be/2 if y < -0.236
b2 = be-b1 if y > -0.237

Element Effective
yi Liyi Liyi2 I' Liycg2
no. length, Li
i (mm)
(mm) (mm2) (mm3) (mm3) (mm3)
1 6.58 6.89 45.32 3.12E+02 2.37E+01 1.42E+04
2 9.42 1.69 15.91 26.87 8.05 2.04E+04
3 38.62 0.60 23.17 13.90 0.00 8.36E+04
4 24.43 15.82 386.45 6,112.33 1,215.51 5.29E+04
5 42.80 99.40 4,254.32 422.88E+03 0.00 9.26E+04
6 9.42 98.31 926.09 91,044.80 8.05 2.04E+04
7 11.40 90.70 1,033.98 93,781.99 123.46 2.47E+04
8 50.85 21.09 1,072.48 22,619.66 215.48 1.10E+05
9 49.88 71.46 3,564.61 254.72E+03 10,344.33 107.93E+03

ycg = 46.516 mm
ILy2 = 526.7E+03 mm3
I'x = 376.8E+03 mm3
Ix = 452.1E+03 mm4

E. Calculation of effective section modulus (Sex) for compression flange stressed to yield
Sex = 9.72E+03 mm3 Sex = Ix/ycg Effective section modulus
Mn = 2.67 kN-m Mn = SexFy Nominal flexural strength
Md = 1.60 kN-m Md = Mn/W Design flexural strength
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: Calc. by: SAC Checked by:
Subject: LC100x50x15x1.2 Date: 22-Sep-22 Revision:
DESIGN OF PURLINS AS PER AISI AND ASD

III. Design Stress under Uplift and Gravity Loadings

A. Strength for Bending Alone Braced by Sheathing
DL = 0.16 kN/m ASD101 = DL + LL = 0.60 kN/m M = 0.67 kN-m
LL = 0.43 kN/m ASD102 = DL + Wp = 0.16 kN/m M = 0.18 kN-m
Wn = 1.28 kN/m ASD103 = DL - Wn = -1.11 kN/m M = -1.25 kN-m
Wp = 0.00 kN/m

1. Under Uplift Force

M = 1.25 kN-m < Md = 1.60 kN-m ==> O.K.

2. Under Gravity Loading

M = 0.67 kN-m < Md = 1.60 kN-m ==> O.K.

B. Strength for Shear Alone

DL = 0.16 kN/m ASD101 = DL + LL = 0.60 kN/m V = 0.89 kN-m
LL = 0.43 kN/m ASD102 = DL + Wp = 0.16 kN/m V = 0.25 kN-m
Wn = 1.28 kN/m ASD103 = DL - Wn = -1.11 kN/m V = -1.67 kN-m
Wp = 0.00 kN/m

kv = 5.34 For Unreinforced web

h = 92.80 mm h = H - 2(R+t)
h/t = 77.33

= 62.32 Since, h/t < 1.415 = 88.18

Then,
0.905 N.A.
= = kN
ℎ

= 0.64 = 15.79 kN

1. Under Uplift Force

V = 1.67 kN-m < Vd = 9.46 kN-m ==> O.K.

2. Under Gravity Loading

V = 0.89 kN-m < Vd = 9.46 kN-m ==> O.K.

IV. Design of Sagrod

Ws = 0.00 kN Ws = WL/n
PL = 0.00 kN PL = (0.05acosθ-sinθ)Ws
FINITE ELEMENT ANALYSIS
Structure Data 9/22/2022

1 Structure Data
This chapter provides model geometry information, including items such as story levels, point coordinates, and
element connectivity.

1.1 Story Data

Table 1.1 - Story Data

Height Elevation Master Splice
Name Similar To
mm mm Story Story
Roof3 773 11595 No None No
Roof2 1072 10822 No None No
Roof1 2850 9750 No None No
RD 3150 6900 No None No
2nd 3750 3750 No None No
NGL 1500 0 No None No
Footing 0 -1500 No None No

1.2 Mass

Table 1.2 - Mass Source

Include
Include Include Include Include Lump at Load
Name Added IsDefault Multiplier
Elements Loads Lateral Vertical Stories Pattern
Mass
MsSrc1 No No Yes Yes No Yes Yes Dead 1
MsSrc1 No No Yes Yes No Yes Yes Sdead 0.8
MsSrc1 No No Yes Yes No Yes Yes Live 0.25

Table 1.3 - Centers of Mass and Rigidity

Cumulative Cumulative
Mass X Mass Y XCM YCM XCCM YCCM XCR YCR
Story Diaphragm X Y
kg kg m m m m m m
kg kg
RD D1 0 0 6.3543 3.8811 0 0 0 0
2nd D1 0 0 6.5879 4.2311 0 0 0 0

Table 1.4 - Mass Summary by Diaphragm

Mass
X Mass Y Mass
Mass X Mass Y Moment of
Story Diaphragm Center Center
kg kg Inertia
m m
ton-m²

RD D1 0 0 0 6.3543 3.8811
2nd D1 0 0 0 6.5879 4.2311

Table 1.5 - Mass Summary by Story

UX UY UZ
Story
kg kg kg
Roof3 661.52 661.52 0
Roof2 6790.09 6790.09 0
Roof1 21090.87 21090.87 0
RD 105416.82 105416.82 0
2nd 99342.33 99342.33 0
NGL 20453.54 20453.54 0
Footing 13797.3 13797.3 0

Page 2 of 25
Properties 9/22/2022

2 Properties
This chapter provides property information for materials, frame sections, shell sections, and links.

2.1 Materials

Table 2.1 - Material Properties - Summary

Unit
E
Name Type ν Weight Design Strengths
MPa
kN/m³
3000Psi Concrete 21525.56 0.2 23.5631 Fc=20.68 MPa
A36 Steel 199947.98 0.3 76.9729 Fy=248.21 MPa, Fu=399.9 MPa
A416Gr270 Tendon 196500.6 0 76.9729 Fy=1689.91 MPa, Fu=1861.58 MPa
A615Gr60 Rebar 199947.98 0.3 76.9729 Fy=413.69 MPa, Fu=620.53 MPa

Table 2.2 - Material Properties - Steel

Unit
E α G Unit Mass Fy Fu
Name ν Weight
MPa 1/C MPa kg/m³ MPa MPa
kN/m³
A36 199947.98 0.3 1.17E-05 76903.07 76.9729 7849.047 248.21 399.9

Table 2.3 - Material Properties - Concrete

Unit
E α G Unit Mass Fc
Name ν Weight Lightweight?
MPa 1/C MPa kg/m³ MPa
kN/m³
3000Psi 21525.56 0.2 9.9E-06 8968.98 23.5631 2402.77 20.68 No

Table 2.4 - Material Properties - Rebar

Unit
E α Unit Mass Fy Fu
Name Weight
MPa 1/C kg/m³ MPa MPa
kN/m³
A615Gr60 199947.98 1.17E-05 76.9729 7849.047 413.69 620.53

Table 2.5 - Material Properties - Tendon

Unit
E α Unit Mass Fy Fu
Name Weight
MPa 1/C kg/m³ MPa MPa
kN/m³
A416Gr270 196500.6 1.17E-05 76.9729 7849.047 1689.91 1861.58

2.2 Frame Sections

Table 2.6 - Frame Sections (Part 1 of 3)

t3 t2 tf tw t2b tfb Radius Area
Name Material Shape
mm mm mm mm mm mm mm cm²
B200x300 3000Psi Concrete Rectangular 300 200 600
B200x400 3000Psi Concrete Rectangular 400 200 800
B200x500 3000Psi Concrete Rectangular 500 200 1000
B250x400 3000Psi Concrete Rectangular 400 250 1000
B300x400 3000Psi Concrete Rectangular 400 300 1200
C200x400 3000Psi Concrete Rectangular 400 200 800
C250x400 3000Psi Concrete Rectangular 400 250 1000
C250X500 3000Psi Concrete Rectangular 500 250 1250
C300x500 3000Psi Concrete Rectangular 500 300 1500
W12X19 A36 Steel I/Wide Flange 309.9 101.9 8.9 6 101.9 8.9 7.6 35.9
W8X10 A36 Steel I/Wide Flange 200.4 100.1 5.2 4.3 100.1 5.2 7.6 19.1

Page 3 of 25
Properties 9/22/2022

Table 2.6 - Frame Sections (Part 2 of 3)

AS2 AS3 J I22 I33 S22 S33 Z22 Z33 R22 R33
Name
cm² cm² cm⁴ cm⁴ cm⁴ cm³ cm³ cm³ cm³ mm mm
B200x300 500 500 46953.1 20000 45000 2000 3000 3000 4500 57.7 86.6
B200x400 666.7 666.7 73241.7 26666.7 106666.7 2666.7 5333.3 4000 8000 57.7 115.5
B200x500 833.3 833.3 99805 33333.3 208333.3 3333.3 8333.3 5000 12500 57.7 144.3
B250x400 833.3 833.3 127345.2 52083.3 133333.3 4166.7 6666.7 6250 10000 72.2 115.5
B300x400 1000 1000 194385.1 90000 160000 6000 8000 9000 12000 86.6 115.5
C200x400 666.7 666.7 73241.7 26666.7 106666.7 2666.7 5333.3 4000 8000 57.7 115.5
C250x400 833.3 833.3 127345.2 52083.3 133333.3 4166.7 6666.7 6250 10000 72.2 115.5
C250X500 1041.7 1041.7 178812.7 65104.2 260416.7 5208.3 10416.7 7812.5 15625 72.2 144.3
C300x500 1250 1250 281737.1 112500 312500 7500 12500 11250 18750 86.6 144.3
W12X19 18.5 15.1 7.5 156.5 5411 30.7 349.2 48.8 404.8 20.9 122.7
W8X10 8.7 8.7 1.8 87 1282 17.4 127.9 27.2 145.4 21.3 81.9

Table 2.6 - Frame Sections (Part 3 of 3)

AS2 AS3 Mass Weight
Name A Modifier J Modifier I22 Modifier I33 Modifier
Modifier Modifier Modifier Modifier
B200x300 1 1 1 0.5 0.7 0.35 1 1
B200x400 1 1 1 0.5 0.7 0.35 1 1
B200x500 1 1 1 0.5 0.7 0.35 1 1
B250x400 1 1 1 0.5 0.7 0.35 1 1
B300x400 1 1 1 0.5 0.7 0.35 1 1
C200x400 1 1 1 0.7 0.7 0.7 1 1
C250x400 1 1 1 0.7 0.7 0.7 1 1
C250X500 1 1 1 0.7 0.7 0.7 1 1
C300x500 1 1 1 0.7 0.7 0.7 1 1
W12X19
W8X10

2.3 Shell Sections

Table 2.7 - Shell Sections - Slab (Part 1 of 2)
Slab
Slab Element One-Way Load f11 f22 f12 m11
Name Material Thickness
Type Type Distribution? Modifier Modifier Modifier Modifier
mm
Col 3000Psi Uniform Shell-Thick 1000 No
F300 3000Psi Uniform Shell-Thick 300 No 1 1 1 0.35
Glass Roof A36 Uniform Shell-Thin 10 No
Roof A36 Uniform Membrane 2.5 No
S120 3000Psi Uniform Shell-Thin 110 No 1 1 1 0.25
Stair 3000Psi Uniform Membrane 120 No 1 1 1 1

Table 2.7 - Shell Sections - Slab (Part 2 of 2)

m22 m12 v13 v23 Mass Weight
Name
Modifier Modifier Modifier Modifier Modifier Modifier
Col
F300 0.35 0.5 1 1 1 1
Glass Roof
Roof
S120 0.25 0.25 1 1 1 1
Stair 0.25 0.25 1 1 1 1

Page 4 of 25
 9/22/2022

3 Loads
This chapter provides loading information as applied to the model.

3.1 Load Patterns

Table 3.1 - Load Patterns

Self Weight
Name Type Auto Load
Multiplier

Dead Dead 1
Live Live 0
Sdead Superimposed Dead 0
Seismic Seismic 0 UBC 97
Wind Wind 0 None
-Wind Wind 0 None
RoofLive Roof Live 0

3.2 Load Sets

Table 3.2 - Shell Uniform Load Sets

Load Load
Load Set
Pattern kN/m²
Residential Sdead 2.88
Residential Live 1.92
Upper Roof Sdead 0.48
Upper Roof RoofLive 0.72
Upper Roof Wind -0.61
Upper Roof -Wind -2.13
Lower Roof Sdead 0.48
Lower Roof RoofLive 0.72
Lower Roof Wind -0.61
Lower Roof -Wind -1.7
watertank Sdead 2.88
watertank Live 12
Glass Roof Sdead 0.48
Glass Roof RoofLive 0.72
Glass Roof Wind -0.6
Glass Roof -Wind -2.37

3.3 Auto Seismic Loading

Table 3.3 - Auto Seismic - UBC 97 (Part 1 of 2)

Load Ct Top Bottom Soil
Type Direction Period Method R Z Ca
Pattern ft Story Story Type
Seismic Seismic X Program Calculated 0.03 Roof3 NGL 8.5 SC 0.4 0.6
Seismic Seismic Y Program Calculated 0.03 Roof3 NGL 8.5 SC 0.4 0.6

Table 3.3 - Auto Seismic - UBC 97 (Part 2 of 2)

Source Period Weight Base
Source Ft Used
Cv Distance Na Nv I Used Used Shear
Type kN
km sec kN kN
1.12 A 2 1.5 2 1 0.597 2287.9075 403.7484 0
1.12 A 2 1.5 2 1 0.597 2287.9075 403.7484 0

Page 5 of 25
 9/22/2022

UBC 97 Auto Seismic Load Calculation

This calculation presents the automatically generated lateral seismic loads for load pattern Seismic according to
UBC 97, as calculated by ETABS.

Direction and Eccentricity

Direction = Multiple

Structural Period

Period Calculation Method = Program Calculated

Coefficient, Ct [UBC 1630.2.2] Ct = 0.03ft

Structure Height Above Base, hn hn = 38.04 ft
Approximate Fundamental Period, Ta [UBC
Ta = Ct (hn Ta = 0.46 sec
1630.2.2 Eq. 30-8]
Program Calculated Period, T [UBC
T ≤ 1.3Ta
1630.2.2.2]

Factors and Coefficients

Response Modification Factor, R [UBC Table 16-N] R = 8.5

Importance Factor, I [UBC Table 16-K] I=1

Seismic Zone Factor, Z [UBC Table 16-I] Z = 0.4
Soil Profile [UBC Table 16-J] = SC
Seismic Source Type = A
Closest Source Distance = 2 km

Near-Source Factor, Na [UBC Table 16-S] Na = 1.5

Near-Source Factor, Nv [UBC Table 16-T] Nv = 2

Site Coefficient, Ca [UBC Table 16-Q] Ca = 0.6

Site Coefficient, Cv [UBC Table 16-R] Cv = 1.12

Equivalent Lateral Forces

Cv I
Base Shear Coefficient [UBC 1630.2.1, Eq. 30-4] =
RT
2.5Ca I
maximum [UBC 1630.2.1, Eq. 30-5] = = 0.176471
R
minimum [UBC 1630.2.1, Eq. 30-6] = 0.11Ca I = 0.066
0.8ZNv I
Zone 4 minimum [UBC 1630.2.1, Eq. 30-7] = = 0.075294
R
min ≤ Vcoeff ≤ max

Calculated Base Shear

Period Used W V Ft
Direction Vcoeff
(sec) (kN) (kN) (kN)
X 0.597 0 2287.9075 403.7484 0
Y 0.597 0 2287.9075 403.7484 0

Page 6 of 25
 9/22/2022

Applied Story Forces

Story Elevation X-Dir Y-Dir Story Elevation X-Dir Y-Dir

m kN kN m kN kN
Roof3 11.595 2.2333 0 Roof3 11.595 0 2.2333
Roof2 10.822 21.395 0 Roof2 10.822 0 21.395
Roof1 9.75 59.8726 0 Roof1 9.75 0 59.8726
RD 6.9 211.7814 0 RD 6.9 0 211.7814
2nd 3.75 108.4662 0 2nd 3.75 0 108.4662
NGL 0 0 0 NGL 0 0 0
Footing -1.5 0 0 Footing -1.5 0 0

Page 7 of 25
Loads 9/22/2022

3.4 Functions
3.4.1 Response Spectrum Functions

Table 3.5 - Response Spectrum Function - UBC 97

Period
Name Acceleration Damping Ca Cv
sec
RS 0 0.6 5 0.6 1.12
RS 0.149 1.5
RS 0.747 1.5
RS 1 1.12
RS 1.2 0.933333
RS 1.4 0.8
RS 1.6 0.7
RS 1.8 0.622222
RS 2 0.56
RS 2.5 0.448
RS 3 0.373333
RS 3.5 0.32
RS 4 0.28
RS 4.5 0.248889
RS 5 0.224
RS 5.5 0.203636
RS 6 0.186667
RS 6.5 0.172308
RS 7 0.16
RS 7.5 0.149333
RS 8 0.14
RS 8.5 0.131765
RS 9 0.124444
RS 9.5 0.117895
RS 10 0.112

3.5 Load Cases

Table 3.6 - Load Cases - Summary

Name Type
RSx Response Spectrum
RSy Response Spectrum

Table 3.7 - Load Cases - Static - Linear

Mass Scale
Name Stiffness From Load Type Load Name Design Load Type
Source Factor
Dead Preset P-delta MsSrc1 Load Pattern Dead 1 Program Determined
Live Preset P-delta MsSrc1 Load Pattern Live 1 Program Determined
Sdead Preset P-delta MsSrc1 Load Pattern Sdead 1 Program Determined
Seismic Preset P-delta MsSrc1 Load Pattern Seismic 1 Program Determined
Wind Preset P-delta MsSrc1 Load Pattern Wind 1 Program Determined
-Wind Preset P-delta MsSrc1 Load Pattern -Wind 1 Program Determined
RoofLive Preset P-delta MsSrc1 Load Pattern RoofLive 1 Program Determined
~TorsionRSxSF Preset P-delta MsSrc1 Load Pattern ~RSxSFECC 1 Program Determined
~TorsionRSySF Preset P-delta MsSrc1 Load Pattern ~RSySFECC 1 Program Determined

Table 3.8 - Load Cases - Modal - Ritz

Target Max Min
Stiffness Mass Load Max
Name Load Type Participation Number Number Design Load Type
From Source Name Cycles
% Modes Modes
Modal1 Preset P-delta MsSrc1 Acceleration UX 0 99 15 1 Program Determined
Modal1 Acceleration UY 0 99
Modal1 Acceleration UZ 0 99
Modal1 Link All 0 99

Page 8 of 25
Loads 9/22/2022

Table 3.9 - Load Cases - Response Spectrum (Part 1 of 2)

Modal
Load Scale Coordinate Angle Modal
Name Mass Source Load Type Function Combination
Name Factor System deg Case
Method
RSx Previous (MsSrc1) Acceleration U1 RS 9806.65 Global 0 Modal1 CQC
RSy Previous (MsSrc1) Acceleration U2 RS 9806.65 Global 0 Modal1 CQC
RSxSF Previous (MsSrc1) Acceleration U1 RS 1163.4 Global 0 Modal1 CQC
RSySF Previous (MsSrc1) Acceleration U2 RS 1229.4 Global 0 Modal1 CQC

Table 3.9 - Load Cases - Response Spectrum (Part 2 of 2)

Directional
Include Rigid Eccentricity Eccentricity Constant
Name Combination Design Load Type
Response Ratio Overrides Damping
Method
RSx No SRSS Program Determined 0 No 0.05
RSy No SRSS Program Determined 0 No 0.05
RSxSF No SRSS Program Determined 0.05 No 0.05
RSySF No SRSS Program Determined 0.05 No 0.05

Table 3.10 - P-delta Options

Automation Method

Non-iterative - Mass

3.6 Load Combinations

Table 3.11 - Load Combinations

Load Scale
Name Type Auto
Case/Combo Factor
1.4D TDL 1.4 Linear Add No
1.2D+1.6L TDL 1.2 Linear Add No
1.2D+1.6L Live 1.6 No
1.2D+1.6Lr+0.5L TDL 1.2 Linear Add No
1.2D+1.6Lr+0.5L RoofLive 1.6 No
1.2D+1.6Lr+0.5L Live 0.5 No
1.2D+1.6Lr+0.5W TDL 1.2 Linear Add No
1.2D+1.6Lr+0.5W RoofLive 1.6 No
1.2D+1.6Lr+0.5W W-env 0.5 No
1.2D+W+0.5L+0.5Lr TDL 1.2 Linear Add No
1.2D+W+0.5L+0.5Lr W-env 1 No
1.2D+W+0.5L+0.5Lr Live 0.5 No
1.2D+W+0.5L+0.5Lr RoofLive 0.5 No
1.5D+E+0.5L TDL 1.5 Linear Add No
1.5D+E+0.5L E-env 1 No
1.5D+E+0.5L Live 0.5 No
0.9D+W TDL 0.9 Linear Add No
0.9D+W W-env 1 No
0.6D+E TDL 0.6 Linear Add No
0.6D+E E-env 1 No
0.6D+E-COL TDL 0.6 Linear Add No
0.6D+E-COL E-env-COL 1 No
1.5D+E+0.5L-COL TDL 1.5 Linear Add No
1.5D+E+0.5L-COL E-env-COL 1 No
1.5D+E+0.5L-COL Live 0.5 No

Page 9 of 25
Analysis Results 9/22/2022

4 Analysis Results
This chapter provides analysis results.

4.1 Structure Results

Table 4.1 - Diaphragm Center of Mass Displacements

UX UY RZ X Y Z
Story Diaphragm Load Case/Combo Point
mm mm rad m m m
RD D1 RSx Max 178.079 117.404 0.008266 45 6.3543 3.8811 6.9
RD D1 RSy Max 114.85 184.297 0.012468 45 6.3543 3.8811 6.9
RD D1 1.4D -0.342 -4.075 0.000774 45 6.3543 3.8811 6.9
RD D1 1.2D+1.6L -0.046 -3.809 0.000891 45 6.3543 3.8811 6.9
RD D1 1.2D+1.6Lr+0.5L -0.433 -4.273 0.000775 45 6.3543 3.8811 6.9
RD D1 1.2D+1.6Lr+0.5W Max -0.335 -3.3 0.000686 45 6.3543 3.8811 6.9
RD D1 1.2D+1.6Lr+0.5W Min -0.462 -3.938 0.000641 45 6.3543 3.8811 6.9
RD D1 1.2D+W+0.5L+0.5Lr Max 0.066 -2.056 0.000711 45 6.3543 3.8811 6.9
RD D1 1.2D+W+0.5L+0.5Lr Min -0.188 -3.331 0.000621 45 6.3543 3.8811 6.9
RD D1 1.5D+E+0.5L Max 21.11 19.176 0.00269 45 6.3543 3.8811 6.9
RD D1 1.5D+E+0.5L Min -21.689 -28.105 -0.000889 45 6.3543 3.8811 6.9
RD D1 0.9D+W Max 0.13 -0.871 0.000462 45 6.3543 3.8811 6.9
RD D1 0.9D+W Min -0.124 -2.146 0.000371 45 6.3543 3.8811 6.9
RD D1 0.6D+E Max 21.253 21.894 0.002121 45 6.3543 3.8811 6.9
RD D1 0.6D+E Min -21.546 -25.386 -0.001458 45 6.3543 3.8811 6.9
RD D1 0.6D+E-COL Max 25.663 26.213 0.002474 45 6.3543 3.8811 6.9
RD D1 0.6D+E-COL Min -25.956 -29.705 -0.00181 45 6.3543 3.8811 6.9
RD D1 1.5D+E+0.5L-COL Max 25.52 23.495 0.003042 45 6.3543 3.8811 6.9
RD D1 1.5D+E+0.5L-COL Min -26.099 -32.424 -0.001242 45 6.3543 3.8811 6.9
2nd D1 RSx Max 105.556 63.298 0.006064 48 6.5879 4.2311 3.75
2nd D1 RSy Max 69.191 101.033 0.008328 48 6.5879 4.2311 3.75
2nd D1 1.4D 0.82 -0.827 0.000462 48 6.5879 4.2311 3.75
2nd D1 1.2D+1.6L 1.039 -0.724 0.000541 48 6.5879 4.2311 3.75
2nd D1 1.2D+1.6Lr+0.5L 0.806 -0.905 0.000454 48 6.5879 4.2311 3.75
2nd D1 1.2D+1.6Lr+0.5W Max 0.696 -0.614 0.000402 48 6.5879 4.2311 3.75
2nd D1 1.2D+1.6Lr+0.5W Min 0.684 -0.824 0.000383 48 6.5879 4.2311 3.75
2nd D1 1.2D+W+0.5L+0.5Lr Max 0.797 -0.201 0.000431 48 6.5879 4.2311 3.75
2nd D1 1.2D+W+0.5L+0.5Lr Min 0.773 -0.621 0.000394 48 6.5879 4.2311 3.75
2nd D1 1.5D+E+0.5L Max 13.68 12.052 0.001699 48 6.5879 4.2311 3.75
2nd D1 1.5D+E+0.5L Min -11.713 -13.834 -0.000619 48 6.5879 4.2311 3.75
2nd D1 0.9D+W Max 0.516 0.04 0.000282 48 6.5879 4.2311 3.75
2nd D1 0.9D+W Min 0.493 -0.379 0.000245 48 6.5879 4.2311 3.75
2nd D1 0.6D+E Max 13.048 12.588 0.001357 48 6.5879 4.2311 3.75
2nd D1 0.6D+E Min -12.345 -13.297 -0.000961 48 6.5879 4.2311 3.75
2nd D1 0.6D+E-COL Max 15.706 14.917 0.001606 48 6.5879 4.2311 3.75
2nd D1 0.6D+E-COL Min -15.003 -15.626 -0.00121 48 6.5879 4.2311 3.75
2nd D1 1.5D+E+0.5L-COL Max 16.338 14.38 0.001948 48 6.5879 4.2311 3.75
2nd D1 1.5D+E+0.5L-COL Min -14.371 -16.163 -0.000868 48 6.5879 4.2311 3.75

Table 4.2 - Diaphragm Max/Avg Drifts

Max Loc Max Loc Max Loc

Story Load Case/Combo Item Max Drift Avg Drift Ratio Label X Y Z
m m m

RD RSx Max Diaph D1 X 0.024117 0.023238 1.038 15 13.46 2.841 6.9

RD RSx Max Diaph D1 Y 0.021888 0.016944 1.292 1 0 9.036 6.9
RD RSy Max Diaph D1 X 0.017879 0.015441 1.158 38 8.209 -1.5 6.9
RD RSy Max Diaph D1 Y 0.034412 0.025271 1.362 1 0 9.036 6.9
RD 1.4D Diaph D1 X 0.00096 0.000429 2.24 21 11.459 9.036 6.9
RD 1.4D Diaph D1 Y 0.001625 0.000893 1.819 1 0 9.036 6.9
RD 1.2D+1.6L Diaph D1 X 0.00101 0.000414 2.438 21 11.459 9.036 6.9
RD 1.2D+1.6L Diaph D1 Y 0.001645 0.000823 1.998 1 0 9.036 6.9
RD 1.2D+1.6Lr+0.5L Diaph D1 X 0.000998 0.000451 2.214 21 11.459 9.036 6.9

Page 10 of 25
Analysis Results 9/22/2022

Max Loc Max Loc Max Loc

Story Load Case/Combo Item Max Drift Avg Drift Ratio Label X Y Z
m m m

RD 1.2D+1.6Lr+0.5L Diaph D1 Y 0.001681 0.000934 1.801 1 0 9.036 6.9

RD 1.2D+1.6Lr+0.5W Max Diaph D1 X 0.000812 0.000373 2.178 21 11.459 9.036 6.9
RD 1.2D+1.6Lr+0.5W Max Diaph D1 Y 0.001342 0.000737 1.821 1 0 9.036 6.9
RD 1.2D+1.6Lr+0.5W Min Diaph D1 X 0.000904 0.000419 2.155 21 11.459 9.036 6.9
RD 1.2D+1.6Lr+0.5W Min Diaph D1 Y 0.001531 0.000867 1.766 1 0 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Max Diaph D1 X 0.000664 0.000278 2.393 21 11.459 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Max Diaph D1 Y 0.001017 0.000474 2.147 1 0 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Min Diaph D1 X 0.000847 0.00037 2.288 21 11.459 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Min Diaph D1 Y 0.001394 0.000733 1.901 1 0 9.036 6.9
RD 1.5D+E+0.5L Max Diaph D1 X 0.003063 0.002373 1.291 40 4.0298 -1.5 6.9
RD 1.5D+E+0.5L Max Diaph D1 Y 0.002762 0.002372 1.164 1 0 9.036 6.9
RD 1.5D+E+0.5L Min Diaph D1 X 0.003857 0.003321 1.161 21 11.459 9.036 6.9
RD 1.5D+E+0.5L Min Diaph D1 Y 0.006401 0.004343 1.474 1 0 9.036 6.9
RD 0.9D+W Max Diaph D1 X 0.000364 0.00015 2.43 21 11.459 9.036 6.9
RD 0.9D+W Max Diaph D1 Y 0.000524 0.000217 2.411 1 0 9.036 6.9
RD 0.9D+W Min Diaph D1 X 0.000546 0.000242 2.256 21 11.459 9.036 6.9
RD 0.9D+W Min Diaph D1 Y 0.000901 0.000477 1.889 1 0 9.036 6.9
RD 0.6D+E Max Diaph D1 X 0.002968 0.002659 1.116 40 4.0298 -1.5 6.9
RD 0.6D+E Max Diaph D1 Y 0.003885 0.002985 1.302 1 0 9.036 6.9
RD 0.6D+E Min Diaph D1 X 0.003181 0.003022 1.053 21 11.459 9.036 6.9
RD 0.6D+E Min Diaph D1 Y 0.005278 0.003751 1.407 1 0 9.036 6.9
RD 0.6D+E-COL Max Diaph D1 X 0.003695 0.003286 1.124 40 4.0298 -1.5 6.9
RD 0.6D+E-COL Max Diaph D1 Y 0.004728 0.003636 1.301 1 0 9.036 6.9
RD 0.6D+E-COL Min Diaph D1 X 0.003711 0.003562 1.042 21 11.459 9.036 6.9
RD 0.6D+E-COL Min Diaph D1 Y 0.006121 0.004402 1.391 1 0 9.036 6.9
RD 1.5D+E+0.5L-COL Max Diaph D1 X 0.003791 0.003001 1.263 40 4.0298 -1.5 6.9
RD 1.5D+E+0.5L-COL Max Diaph D1 Y 0.003605 0.00304 1.186 1 0 9.036 6.9
RD 1.5D+E+0.5L-COL Min Diaph D1 X 0.004387 0.003949 1.111 21 11.459 9.036 6.9
RD 1.5D+E+0.5L-COL Min Diaph D1 Y 0.007244 0.004994 1.451 1 0 9.036 6.9
2nd RSx Max Diaph D1 X 0.03356 0.028181 1.191 5 5.526 0 3.75
2nd RSx Max Diaph D1 Y 0.024888 0.019128 1.301 1 0 9.036 3.75
2nd RSy Max Diaph D1 X 0.026008 0.019607 1.326 13 11.459 0 3.75
2nd RSy Max Diaph D1 Y 0.04103 0.027427 1.496 1 0 9.036 3.75
2nd 1.4D Diaph D1 X 0.000795 0.000209 3.812 13 11.459 0 3.75
2nd 1.4D Diaph D1 Y 0.001037 0.000241 4.304 1 0 9.036 3.75
2nd 1.2D+1.6L Diaph D1 X 0.000945 0.000262 3.611 13 11.459 0 3.75
2nd 1.2D+1.6L Diaph D1 Y 0.001148 0.000215 5.34 1 0 9.036 3.75
2nd 1.2D+1.6Lr+0.5L Diaph D1 X 0.000784 0.000206 3.805 13 11.459 0 3.75
2nd 1.2D+1.6Lr+0.5L Diaph D1 Y 0.001044 0.000261 4.006 1 0 9.036 3.75
2nd 1.2D+1.6Lr+0.5W Max Diaph D1 X 0.00069 0.000189 3.658 13 11.459 0 3.75
2nd 1.2D+1.6Lr+0.5W Max Diaph D1 Y 0.000841 0.000181 4.634 1 0 9.036 3.75
2nd 1.2D+1.6Lr+0.5W Min Diaph D1 X 0.000663 0.000165 4.025 13 11.459 0 3.75
2nd 1.2D+1.6Lr+0.5W Min Diaph D1 Y 0.00093 0.000238 3.914 1 0 9.036 3.75
2nd 1.2D+W+0.5L+0.5Lr Max Diaph D1 X 0.000748 0.000222 3.363 13 11.459 0 3.75
2nd 1.2D+W+0.5L+0.5Lr Max Diaph D1 Y 0.000749 7.2E-05 10.358 1 0 9.036 3.75
2nd 1.2D+W+0.5L+0.5Lr Min Diaph D1 X 0.000692 0.000174 3.975 13 11.459 0 3.75
2nd 1.2D+W+0.5L+0.5Lr Min Diaph D1 Y 0.000926 0.000184 5.023 1 0 9.036 3.75
2nd 1.5D+E+0.5L Max Diaph D1 X 0.005079 0.003722 1.365 13 11.459 0 3.75
2nd 1.5D+E+0.5L Max Diaph D1 Y 0.004229 0.003385 1.249 1 0 9.036 3.75
2nd 1.5D+E+0.5L Min Diaph D1 X 0.003262 0.003169 1.029 5 5.526 0 3.75
2nd 1.5D+E+0.5L Min Diaph D1 Y 0.006612 0.003906 1.693 1 0 9.036 3.75
2nd 0.9D+W Max Diaph D1 X 0.000489 0.000151 3.23 13 11.459 0 3.75
2nd 0.9D+W Min Diaph D1 X 0.000433 0.000103 4.202 13 11.459 0 3.75
2nd 0.9D+W Min Diaph D1 Y 0.0006 0.000114 5.259 1 0 9.036 3.75
2nd 0.6D+E Max Diaph D1 X 0.004486 0.00356 1.26 13 11.459 0 3.75
2nd 0.6D+E Max Diaph D1 Y 0.004976 0.003543 1.405 1 0 9.036 3.75
2nd 0.6D+E Min Diaph D1 X 0.003826 0.00339 1.128 5 5.526 0 3.75
2nd 0.6D+E Min Diaph D1 Y 0.005864 0.003749 1.564 1 0 9.036 3.75

Page 11 of 25
Analysis Results 9/22/2022

Max Loc Max Loc Max Loc

Story Load Case/Combo Item Max Drift Avg Drift Ratio Label X Y Z
m m m

2nd 0.6D+E-COL Max Diaph D1 X 0.005518 0.004339 1.271 13 11.459 0 3.75

2nd 0.6D+E-COL Max Diaph D1 Y 0.005939 0.004281 1.387 1 0 9.036 3.75
2nd 0.6D+E-COL Min Diaph D1 X 0.004858 0.004169 1.165 5 5.526 0 3.75
2nd 0.6D+E-COL Min Diaph D1 Y 0.006827 0.004487 1.521 1 0 9.036 3.75
2nd 1.5D+E+0.5L-COL Max Diaph D1 X 0.006111 0.004501 1.358 13 11.459 0 3.75
2nd 1.5D+E+0.5L-COL Max Diaph D1 Y 0.005191 0.004123 1.259 1 0 9.036 3.75
2nd 1.5D+E+0.5L-COL Min Diaph D1 X 0.004294 0.00399 1.076 5 5.526 0 3.75
2nd 1.5D+E+0.5L-COL Min Diaph D1 Y 0.007575 0.004645 1.631 1 0 9.036 3.75

4.2 Story Results

Table 4.3 - Story Max/Avg Displacements

Maximum Average
Story Load Case/Combo Direction Ratio
mm mm
RD RSx Max X 207.547 181.879 1.141
RD RSx Max Y 159.12 122.988 1.294
2nd RSx Max X 133.825 109.666 1.22
2nd RSx Max Y 93.33 71.704 1.302
RD RSy Max X 164.992 127.807 1.291
RD RSy Max Y 261.663 181.871 1.439
2nd RSy Max X 108.783 79.155 1.374
2nd RSy Max Y 153.863 102.834 1.496
RD 1.4D Y 9.012 3.725 2.419
2nd 1.4D X 3.565 1.074 3.32
2nd 1.4D Y 3.887 0.903 4.304
RD 1.2D+1.6L Y 9.491 3.406 2.786
2nd 1.2D+1.6L X 4.24 1.329 3.189
2nd 1.2D+1.6L Y 4.304 0.806 5.34
RD 1.2D+1.6Lr+0.5L Y 9.22 3.926 2.348
2nd 1.2D+1.6Lr+0.5L X 3.508 1.057 3.319
2nd 1.2D+1.6Lr+0.5L Y 3.915 0.977 4.006
RD 1.2D+1.6Lr+0.5W Max Y 7.388 3.008 2.456
2nd 1.2D+1.6Lr+0.5W Max X 3.089 0.958 3.225
2nd 1.2D+1.6Lr+0.5W Max Y 3.154 0.681 4.634
RD 1.2D+1.6Lr+0.5W Min X 4.083 0.482 8.479
RD 1.2D+1.6Lr+0.5W Min Y 8.317 3.629 2.292
2nd 1.2D+1.6Lr+0.5W Min X 2.965 0.857 3.458
2nd 1.2D+1.6Lr+0.5W Min Y 3.487 0.891 3.914
RD 1.2D+W+0.5L+0.5Lr Max X 3.645 0.217 16.765
RD 1.2D+W+0.5L+0.5Lr Max Y 6.011 1.766 3.404
2nd 1.2D+W+0.5L+0.5Lr Max X 3.353 1.108 3.026
2nd 1.2D+W+0.5L+0.5Lr Max Y 2.809 0.271 10.358
RD 1.2D+W+0.5L+0.5Lr Min Y 7.869 3.007 2.616
2nd 1.2D+W+0.5L+0.5Lr Min X 3.105 0.907 3.422
2nd 1.2D+W+0.5L+0.5Lr Min Y 3.474 0.692 5.023
RD 1.5D+E+0.5L Max X 30.434 22.295 1.365
RD 1.5D+E+0.5L Max Y 24.474 20.149 1.215
2nd 1.5D+E+0.5L Max X 20.848 14.859 1.403
2nd 1.5D+E+0.5L Max Y 15.857 12.69 1.25
RD 1.5D+E+0.5L Min X 24.229 22.768 1.064
RD 1.5D+E+0.5L Min Y 44.889 28.264 1.588
2nd 1.5D+E+0.5L Min X 12.542 12.038 1.042
2nd 1.5D+E+0.5L Min Y 24.795 14.649 1.693
RD 0.9D+W Max X 2.363 0.266 8.868
RD 0.9D+W Max Y 3.235 0.694 4.663
2nd 0.9D+W Max X 2.193 0.747 2.934
RD 0.9D+W Min X 2.561 0.221 11.572
RD 0.9D+W Min Y 5.091 1.934 2.632

Page 12 of 25
Analysis Results 9/22/2022

Maximum Average
Story Load Case/Combo Direction Ratio
mm mm
2nd 0.9D+W Min X 1.945 0.547 3.558
2nd 0.9D+W Min Y 2.249 0.428 5.259
RD 0.6D+E Max X 27.512 22.404 1.228
RD 0.6D+E Max Y 30.819 22.61 1.363
2nd 0.6D+E Max X 18.186 14.034 1.296
2nd 0.6D+E Max Y 18.66 13.282 1.405
RD 0.6D+E Min X 24.241 22.573 1.074
RD 0.6D+E Min Y 38.544 25.802 1.494
2nd 0.6D+E Min X 15.163 13.122 1.156
2nd 0.6D+E Min Y 21.992 14.058 1.564
RD 0.6D+E-COL Max X 34.144 27.54 1.24
RD 0.6D+E-COL Max Y 36.973 27.354 1.352
2nd 0.6D+E-COL Max X 22.53 17.193 1.31
2nd 0.6D+E-COL Max Y 22.27 16.05 1.388
RD 0.6D+E-COL Min X 30.874 27.778 1.111
RD 0.6D+E-COL Min Y 44.697 30.547 1.463
2nd 0.6D+E-COL Min X 19.509 16.281 1.198
2nd 0.6D+E-COL Min Y 25.602 16.825 1.522
RD 1.5D+E+0.5L-COL Max X 37.066 27.431 1.351
RD 1.5D+E+0.5L-COL Max Y 30.628 24.893 1.23
2nd 1.5D+E+0.5L-COL Max X 25.192 18.018 1.398
2nd 1.5D+E+0.5L-COL Max Y 19.467 15.458 1.259
RD 1.5D+E+0.5L-COL Min X 27.965 26.914 1.039
RD 1.5D+E+0.5L-COL Min Y 51.042 33.008 1.546
2nd 1.5D+E+0.5L-COL Min X 16.888 15.313 1.103
2nd 1.5D+E+0.5L-COL Min Y 28.405 17.417 1.631

Table 4.4 - Story Drifts

X Y Z
Story Load Case/Combo Direction Drift Label
m m m
Roof2 RSx Max X 0.004318 79 2.763 2 10.822
Roof2 RSx Max Y 0.005307 32 5.526 2 10.822
Roof2 RSy Max X 0.002795 32 5.526 2 10.822
Roof2 RSy Max Y 0.008739 32 5.526 2 10.822
Roof2 1.4D X 0.002018 32 5.526 2 10.822
Roof2 1.4D Y 0.002144 79 2.763 2 10.822
Roof2 1.2D+1.6L X 0.002062 79 2.763 2 10.822
Roof2 1.2D+1.6L Y 0.002444 65 8.4925 2 10.822
Roof2 1.2D+1.6Lr+0.5L X 0.002525 32 5.526 2 10.822
Roof2 1.2D+1.6Lr+0.5L Y 0.002572 79 2.763 2 10.822
Roof2 1.2D+1.6Lr+0.5W Max X 0.001797 32 5.526 2 10.822
Roof2 1.2D+1.6Lr+0.5W Max Y 0.001848 79 2.763 2 10.822
Roof2 1.2D+1.6Lr+0.5W Min X 0.002259 32 5.526 2 10.822
Roof2 1.2D+1.6Lr+0.5W Min Y 0.002343 79 2.763 2 10.822
Roof2 1.2D+W+0.5L+0.5Lr Max X 0.001006 79 2.763 2 10.822
Roof2 1.2D+W+0.5L+0.5Lr Max Y 0.002017 65 8.4925 2 10.822
Roof2 1.2D+W+0.5L+0.5Lr Min X 0.001711 79 2.763 2 10.822
Roof2 1.2D+W+0.5L+0.5Lr Min Y 0.002036 65 8.4925 2 10.822
Roof2 1.5D+E+0.5L Max X 0.001764 32 5.526 2 10.822
Roof2 1.5D+E+0.5L Max Y 0.001828 65 8.4925 2 10.822
Roof2 1.5D+E+0.5L Min X 0.002762 79 2.763 2 10.822
Roof2 1.5D+E+0.5L Min Y 0.003128 65 8.4925 2 10.822
Roof2 0.9D+W Max X 0.000295 79 2.763 2 10.822
Roof2 0.9D+W Max Y 0.001383 65 8.4925 2 10.822
Roof2 0.9D+W Min X 0.001 79 2.763 2 10.822
Roof2 0.9D+W Min Y 0.001402 65 8.4925 2 10.822
Roof2 0.6D+E Max X 0.000381 32 5.526 2 10.822
Roof2 0.6D+E Max Y 0.000538 32 5.526 2 10.822
Roof2 0.6D+E Min X 0.001372 79 2.763 2 10.822
Roof2 0.6D+E Min Y 0.001695 32 5.526 2 10.822
Page 13 of 25
Analysis Results 9/22/2022

X Y Z
Story Load Case/Combo Direction Drift Label
m m m
Roof2 0.6D+E-COL Max X 0.000275 32 5.526 2 10.822
Roof2 0.6D+E-COL Max Y 0.000732 32 5.526 2 10.822
Roof2 0.6D+E-COL Min X 0.001475 79 2.763 2 10.822
Roof2 0.6D+E-COL Min Y 0.00189 32 5.526 2 10.822
Roof2 1.5D+E+0.5L-COL Max X 0.001657 32 5.526 2 10.822
Roof2 1.5D+E+0.5L-COL Max Y 0.001715 65 8.4925 2 10.822
Roof2 1.5D+E+0.5L-COL Min X 0.002866 79 2.763 2 10.822
Roof2 1.5D+E+0.5L-COL Min Y 0.003241 65 8.4925 2 10.822
Roof1 RSx Max X 0.009444 2 9.054 9.036 9.75
Roof1 RSx Max Y 0.010737 68 5.526 9.036 9.75
Roof1 RSy Max X 0.005477 2 9.054 9.036 9.75
Roof1 RSy Max Y 0.016298 1 0 9.036 9.75
Roof1 1.4D X 0.00144 39 5.526 -1.5 9.75
Roof1 1.4D Y 0.002447 45 11.459 2 9.75
Roof1 1.2D+1.6L X 0.001432 39 5.526 -1.5 9.75
Roof1 1.2D+1.6L Y 0.002429 45 11.459 2 9.75
Roof1 1.2D+1.6Lr+0.5L X 0.001563 39 5.526 -1.5 9.75
Roof1 1.2D+1.6Lr+0.5L Y 0.002714 45 11.459 2 9.75
Roof1 1.2D+1.6Lr+0.5W Max X 0.001264 39 5.526 -1.5 9.75
Roof1 1.2D+1.6Lr+0.5W Max Y 0.002077 45 11.459 2 9.75
Roof1 1.2D+1.6Lr+0.5W Min X 0.001436 39 5.526 -1.5 9.75
Roof1 1.2D+1.6Lr+0.5W Min Y 0.002465 45 11.459 2 9.75
Roof1 1.2D+W+0.5L+0.5Lr Max X 0.000906 39 5.526 -1.5 9.75
Roof1 1.2D+W+0.5L+0.5Lr Max Y 0.001294 45 11.459 2 9.75
Roof1 1.2D+W+0.5L+0.5Lr Min X 0.00125 39 5.526 -1.5 9.75
Roof1 1.2D+W+0.5L+0.5Lr Min Y 0.00207 45 11.459 2 9.75
Roof1 1.5D+E+0.5L Max X 0.000604 39 5.526 -1.5 9.75
Roof1 1.5D+E+0.5L Max Y 0.001564 1 0 9.036 9.75
Roof1 1.5D+E+0.5L Min X 0.002605 39 5.526 -1.5 9.75
Roof1 1.5D+E+0.5L Min Y 0.004583 45 11.459 2 9.75
Roof1 0.9D+W Max X 0.000456 38 8.209 -1.5 9.75
Roof1 0.9D+W Min X 0.000796 39 5.526 -1.5 9.75
Roof1 0.9D+W Min Y 0.001282 45 11.459 2 9.75
Roof1 0.6D+E Max X 0.000828 21 11.459 9.036 9.75
Roof1 0.6D+E Max Y 0.001869 1 0 9.036 9.75
Roof1 0.6D+E Min X 0.001646 13 11.459 0 9.75
Roof1 0.6D+E Min Y 0.00292 21 11.459 9.036 9.75
Roof1 0.6D+E-COL Max X 0.001042 21 11.459 9.036 9.75
Roof1 0.6D+E-COL Max Y 0.002257 1 0 9.036 9.75
Roof1 0.6D+E-COL Min X 0.001855 13 11.459 0 9.75
Roof1 0.6D+E-COL Min Y 0.003272 21 11.459 9.036 9.75
Roof1 1.5D+E+0.5L-COL Max Y 0.001952 1 0 9.036 9.75
Roof1 1.5D+E+0.5L-COL Min X 0.002805 39 5.526 -1.5 9.75
Roof1 1.5D+E+0.5L-COL Min Y 0.004929 45 11.459 2 9.75
RD RSx Max X 0.024117 15 13.46 2.841 6.9
RD RSx Max Y 0.021888 1 0 9.036 6.9
RD RSy Max X 0.017879 38 8.209 -1.5 6.9
RD RSy Max Y 0.034412 1 0 9.036 6.9
RD 1.4D X 0.000964 3 13.46 9.036 6.9
RD 1.4D Y 0.001625 1 0 9.036 6.9
RD 1.2D+1.6L X 0.001014 3 13.46 9.036 6.9
RD 1.2D+1.6L Y 0.001645 1 0 9.036 6.9
RD 1.2D+1.6Lr+0.5L X 0.001001 3 13.46 9.036 6.9
RD 1.2D+1.6Lr+0.5L Y 0.001681 1 0 9.036 6.9
RD 1.2D+1.6Lr+0.5W Max X 0.000816 3 13.46 9.036 6.9
RD 1.2D+1.6Lr+0.5W Max Y 0.001342 1 0 9.036 6.9
RD 1.2D+1.6Lr+0.5W Min X 0.000907 3 13.46 9.036 6.9
RD 1.2D+1.6Lr+0.5W Min Y 0.001531 1 0 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Max X 0.000668 3 13.46 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Max Y 0.001017 1 0 9.036 6.9

Page 14 of 25
Analysis Results 9/22/2022

X Y Z
Story Load Case/Combo Direction Drift Label
m m m
RD 1.2D+W+0.5L+0.5Lr Min X 0.00085 3 13.46 9.036 6.9
RD 1.2D+W+0.5L+0.5Lr Min Y 0.001394 1 0 9.036 6.9
RD 1.5D+E+0.5L Max X 0.003063 40 4.0298 -1.5 6.9
RD 1.5D+E+0.5L Max Y 0.002762 1 0 9.036 6.9
RD 1.5D+E+0.5L Min X 0.003866 3 13.46 9.036 6.9
RD 1.5D+E+0.5L Min Y 0.006401 1 0 9.036 6.9
RD 0.9D+W Max X 0.000366 3 13.46 9.036 6.9
RD 0.9D+W Max Y 0.000524 1 0 9.036 6.9
RD 0.9D+W Min X 0.000549 3 13.46 9.036 6.9
RD 0.9D+W Min Y 0.000901 1 0 9.036 6.9
RD 0.6D+E Max X 0.002968 40 4.0298 -1.5 6.9
RD 0.6D+E Max Y 0.003885 1 0 9.036 6.9
RD 0.6D+E Min X 0.003187 3 13.46 9.036 6.9
RD 0.6D+E Min Y 0.005278 1 0 9.036 6.9
RD 0.6D+E-COL Max X 0.003695 40 4.0298 -1.5 6.9
RD 0.6D+E-COL Max Y 0.004728 1 0 9.036 6.9
RD 0.6D+E-COL Min X 0.003718 3 13.46 9.036 6.9
RD 0.6D+E-COL Min Y 0.006121 1 0 9.036 6.9
RD 1.5D+E+0.5L-COL Max X 0.003791 40 4.0298 -1.5 6.9
RD 1.5D+E+0.5L-COL Max Y 0.003605 1 0 9.036 6.9
RD 1.5D+E+0.5L-COL Min X 0.004397 3 13.46 9.036 6.9
RD 1.5D+E+0.5L-COL Min Y 0.007244 1 0 9.036 6.9
2nd RSx Max X 0.03356 5 5.526 0 3.75
2nd RSx Max Y 0.024888 1 0 9.036 3.75
2nd RSy Max X 0.026008 13 11.459 0 3.75
2nd RSy Max Y 0.04103 1 0 9.036 3.75
2nd 1.4D X 0.000795 13 11.459 0 3.75
2nd 1.4D Y 0.001037 1 0 9.036 3.75
2nd 1.2D+1.6L X 0.000945 13 11.459 0 3.75
2nd 1.2D+1.6L Y 0.001148 1 0 9.036 3.75
2nd 1.2D+1.6Lr+0.5L X 0.000784 13 11.459 0 3.75
2nd 1.2D+1.6Lr+0.5L Y 0.001044 1 0 9.036 3.75
2nd 1.2D+1.6Lr+0.5W Max X 0.00069 13 11.459 0 3.75
2nd 1.2D+1.6Lr+0.5W Max Y 0.000841 1 0 9.036 3.75
2nd 1.2D+1.6Lr+0.5W Min X 0.000663 13 11.459 0 3.75
2nd 1.2D+1.6Lr+0.5W Min Y 0.00093 1 0 9.036 3.75
2nd 1.2D+W+0.5L+0.5Lr Max X 0.000748 13 11.459 0 3.75
2nd 1.2D+W+0.5L+0.5Lr Max Y 0.000749 1 0 9.036 3.75
2nd 1.2D+W+0.5L+0.5Lr Min X 0.000692 13 11.459 0 3.75
2nd 1.2D+W+0.5L+0.5Lr Min Y 0.000926 1 0 9.036 3.75
2nd 1.5D+E+0.5L Max X 0.005079 13 11.459 0 3.75
2nd 1.5D+E+0.5L Max Y 0.004229 1 0 9.036 3.75
2nd 1.5D+E+0.5L Min X 0.003262 5 5.526 0 3.75
2nd 1.5D+E+0.5L Min Y 0.006612 1 0 9.036 3.75
2nd 0.9D+W Max X 0.000489 13 11.459 0 3.75
2nd 0.9D+W Min X 0.000433 13 11.459 0 3.75
2nd 0.9D+W Min Y 0.0006 1 0 9.036 3.75
2nd 0.6D+E Max X 0.004486 13 11.459 0 3.75
2nd 0.6D+E Max Y 0.004976 1 0 9.036 3.75
2nd 0.6D+E Min X 0.003826 5 5.526 0 3.75
2nd 0.6D+E Min Y 0.005864 1 0 9.036 3.75
2nd 0.6D+E-COL Max X 0.005518 13 11.459 0 3.75
2nd 0.6D+E-COL Max Y 0.005939 1 0 9.036 3.75
2nd 0.6D+E-COL Min X 0.004858 5 5.526 0 3.75
2nd 0.6D+E-COL Min Y 0.006827 1 0 9.036 3.75
2nd 1.5D+E+0.5L-COL Max X 0.006111 13 11.459 0 3.75
2nd 1.5D+E+0.5L-COL Max Y 0.005191 1 0 9.036 3.75
2nd 1.5D+E+0.5L-COL Min X 0.004294 5 5.526 0 3.75
2nd 1.5D+E+0.5L-COL Min Y 0.007575 1 0 9.036 3.75
NGL RSx Max X 0.006782 13 11.459 0 0

Page 15 of 25
Analysis Results 9/22/2022

X Y Z
Story Load Case/Combo Direction Drift Label
m m m
NGL RSx Max Y 0.004523 68 5.526 9.036 0
NGL RSy Max X 0.005972 13 11.459 0 0
NGL RSy Max Y 0.007467 68 5.526 9.036 0
NGL 1.4D X 0.000975 13 11.459 0 0
NGL 1.4D Y 0.001342 2 9.054 9.036 0
NGL 1.2D+1.6L X 0.001126 13 11.459 0 0
NGL 1.2D+1.6L Y 0.00147 68 5.526 9.036 0
NGL 1.2D+1.6Lr+0.5L X 0.000974 13 11.459 0 0
NGL 1.2D+1.6Lr+0.5L Y 0.001325 2 9.054 9.036 0
NGL 1.2D+1.6Lr+0.5W Max X 0.000869 13 11.459 0 0
NGL 1.2D+1.6Lr+0.5W Max Y 0.00122 2 9.054 9.036 0
NGL 1.2D+1.6Lr+0.5W Min X 0.000834 13 11.459 0 0
NGL 1.2D+1.6Lr+0.5W Min Y 0.001162 2 9.054 9.036 0
NGL 1.2D+W+0.5L+0.5Lr Max X 0.000913 13 11.459 0 0
NGL 1.2D+W+0.5L+0.5Lr Max Y 0.001222 68 5.526 9.036 0
NGL 1.2D+W+0.5L+0.5Lr Min X 0.000867 10 13.46 5.736 0
NGL 1.2D+W+0.5L+0.5Lr Min Y 0.001134 68 5.526 9.036 0
NGL 1.5D+E+0.5L Max X 0.001975 13 11.459 0 0
NGL 1.5D+E+0.5L Max Y 0.002478 68 5.526 9.036 0
NGL 1.5D+E+0.5L Min X 0.000763 1 0 9.036 0
NGL 1.5D+E+0.5L Min Y 0.001164 6 1.5 5.351 0
NGL 0.9D+W Max X 0.000598 13 11.459 0 0
NGL 0.9D+W Max Y 0.000815 2 9.054 9.036 0
NGL 0.9D+W Min X 0.000585 10 13.46 5.736 0
NGL 0.9D+W Min Y 0.000721 68 5.526 9.036 0
NGL 0.6D+E Max X 0.001258 13 11.459 0 0
NGL 0.6D+E Max Y 0.001525 68 5.526 9.036 0
NGL 0.6D+E Min X 0.000737 1 0 9.036 0
NGL 0.6D+E Min Y 0.001031 6 1.5 5.351 0
NGL 0.6D+E-COL Max X 0.001494 13 11.459 0 0
NGL 0.6D+E-COL Max Y 0.001693 68 5.526 9.036 0
NGL 0.6D+E-COL Min X 0.000897 4 2.537 0 0
NGL 0.6D+E-COL Min Y 0.0012 6 1.5 5.351 0
NGL 1.5D+E+0.5L-COL Max X 0.002211 13 11.459 0 0
NGL 1.5D+E+0.5L-COL Max Y 0.002646 68 5.526 9.036 0
NGL 1.5D+E+0.5L-COL Min X 0.000903 1 0 9.036 0
NGL 1.5D+E+0.5L-COL Min Y 0.001333 6 1.5 5.351 0

Table 4.5 - Story Forces

P VX VY T MX MY
Story Load Case/Combo Location
kN kN kN kN-m kN-m kN-m
Roof3 RSx Max Top 0 8.1746 5.2666 28.8552 0 0
Roof3 RSx Max Bottom 71.5538 21.6705 255.8833 1556.6131 299.1565 424.4165
Roof3 RSy Max Top 0 5.0279 7.8817 46.4573 0 0
Roof3 RSy Max Bottom 110.4566 25.7709 393.8333 2458.2136 465.2875 658.0089
Roof3 1.4D Top 4.9578 0.002 0.0053 0.0235 4.2142 -28.5326
Roof3 1.4D Bottom 71.2224 -29.1223 111.4388 627.7441 156.247 -441.954
Roof3 1.2D+1.6L Top 4.2496 0.0017 0.0051 0.0224 3.6121 -24.4565
Roof3 1.2D+1.6L Bottom 57.5825 -28.3581 110.9206 678.0706 121.0882 -351.9466
Roof3 1.2D+1.6Lr+0.5L Top 10.3165 0.0023 0.0058 0.0256 8.769 -59.372
Roof3 1.2D+1.6Lr+0.5L Bottom 124.2154 -32.8748 159.7844 870.9052 280.837 -754.072
Roof3 1.2D+1.6Lr+0.5W Max Top 8.7102 0.0022 0.0052 0.0235 7.4037 -27.0934
Roof3 1.2D+1.6Lr+0.5W Max Bottom 108.2159 -25.0715 139.0508 748.064 244.6642 -407.3975
Roof3 1.2D+1.6Lr+0.5W Min Top 4.7078 0.0018 0.0044 0.0194 4.0016 -50.1279
Roof3 1.2D+1.6Lr+0.5W Min Bottom 65.6281 -29.917 99.4178 549.2997 144.4683 -660.7452
Roof3 1.2D+W+0.5L+0.5Lr Max Top 2.933 0.0016 0.0044 0.0193 2.493 29.1896
Roof3 1.2D+W+0.5L+0.5Lr Max Bottom 45.8785 -14.6802 87.0696 513.9778 96.7084 219.8319
Roof3 1.2D+W+0.5L+0.5Lr Min Top -5.072 0.0009 0.0026 0.0112 -4.3112 -16.8794
Roof3 1.2D+W+0.5L+0.5Lr Min Bottom -39.2973 -24.3713 7.8038 116.4491 -103.6836 -286.8634
Roof3 1.5D+E+0.5L Max Top 5.312 0.9723 0.9943 5.8504 4.5152 -30.5707
Page 16 of 25
Analysis Results 9/22/2022

P VX VY T MX MY
Story Load Case/Combo Location
kN kN kN kN-m kN-m kN-m
Roof3 1.5D+E+0.5L Max Bottom 89.1115 -29.0088 173.7068 1025.7666 221.9418 -382.4135
Roof3 1.5D+E+0.5L Min Top 5.312 -0.9681 -0.9826 -5.7986 4.5152 -30.5707
Roof3 1.5D+E+0.5L Min Bottom 61.3421 -35.5187 74.7166 406.9019 104.8496 -547.8364
Roof3 0.9D+W Max Top -0.0253 0.001 0.0027 0.0121 -0.0215 46.2148
Roof3 0.9D+W Max Bottom 11.6211 -5.2373 39.798 245.3701 20.0753 426.0302
Roof3 0.9D+W Min Top -8.0303 0.0003 0.001 0.004 -6.8258 0.1458
Roof3 0.9D+W Min Bottom -73.5546 -14.9285 -39.4679 -152.1586 -180.3166 -80.6651
Roof3 0.6D+E Max Top 2.1248 0 0.9907 5.8346 1.8061 -12.2283
Roof3 0.6D+E Max Bottom 44.4086 -9.226 97.2546 578.4655 125.5091 -106.6974
Roof3 0.6D+E Min Top 2.1248 -0.9693 -0.9862 -5.8144 1.8061 -12.2283
Roof3 0.6D+E Min Bottom 16.6392 -15.7359 -1.7356 -40.3992 8.4169 -272.1203
Roof3 0.6D+E-COL Max Top 2.1248 1.1603 1.1782 6.8616 1.8061 -12.2283
Roof3 0.6D+E-COL Max Bottom 46.9607 -8.4519 106.3746 634.3133 136.1937 -91.5115
Roof3 0.6D+E-COL Min Top 2.1248 -1.1586 -1.1737 -6.8415 1.8061 -12.2283
Roof3 0.6D+E-COL Min Bottom 14.0871 -16.5101 -10.8556 -96.247 -2.2677 -287.3063
Roof3 1.5D+E+0.5L-COL Max Top 5.312 1.1615 1.1818 6.8775 4.5152 -30.5707
Roof3 1.5D+E+0.5L-COL Max Bottom 91.6636 -28.2346 182.8269 1081.6144 232.6264 -367.2275
Roof3 1.5D+E+0.5L-COL Min Top 5.312 -1.1573 -1.1701 -6.8257 4.5152 -30.5707
Roof3 1.5D+E+0.5L-COL Min Bottom 58.79 -36.2929 65.5966 351.0541 94.165 -563.0224
Roof2 RSx Max Top 71.5538 67.1766 201.9667 1255.5251 299.1565 424.4165
Roof2 RSx Max Bottom 71.5538 67.1766 201.9667 1255.5251 515.6569 400.2054
Roof2 RSy Max Top 110.4566 39.1005 312.9383 1924.6546 465.2875 658.0089
Roof2 RSy Max Bottom 110.4566 39.1005 312.9383 1924.6546 800.7554 648.0843
Roof2 1.4D Top 75.3646 -29.1022 111.4914 627.9938 164.5315 -477.132
Roof2 1.4D Bottom 109.5344 -29.1022 111.4914 627.9938 65.2929 -798.1704
Roof2 1.2D+1.6L Top 61.133 -28.3406 110.9706 678.3003 128.1892 -382.0991
Roof2 1.2D+1.6L Bottom 90.4214 -28.3406 110.9706 678.3003 26.6117 -660.9154
Roof2 1.2D+1.6Lr+0.5L Top 132.8348 -32.8518 159.8431 871.1884 298.0757 -827.272
Roof2 1.2D+1.6Lr+0.5L Bottom 184.9731 -32.8518 159.8431 871.1884 149.8195 -1304.9773
Roof2 1.2D+1.6Lr+0.5W Max Top 115.4933 -25.0534 139.1041 748.3226 259.2189 -440.8011
Roof2 1.2D+1.6Lr+0.5W Max Bottom 161.6798 -25.0534 139.7581 753.876 131.3563 -746.4327
Roof2 1.2D+1.6Lr+0.5W Min Top 69.5614 -29.8954 99.4613 549.5054 152.3349 -722.548
Roof2 1.2D+1.6Lr+0.5W Min Bottom 102.4222 -29.8954 101.2837 564.9821 63.0117 -1146.5385
Roof2 1.2D+W+0.5L+0.5Lr Max Top 48.3289 -14.6709 87.1125 514.1774 101.6093 255.8198
Roof2 1.2D+W+0.5L+0.5Lr Max Bottom 72.8543 -14.6709 88.4204 525.2842 23.716 258.4434
Roof2 1.2D+W+0.5L+0.5Lr Min Top -43.5349 -24.3549 7.8268 116.543 -112.1588 -307.6741
Roof2 1.2D+W+0.5L+0.5Lr Min Bottom -45.6608 -24.3549 11.4716 147.4964 -112.9733 -541.7682
Roof2 1.5D+E+0.5L Max Top 93.5496 -24.2663 163.6203 959.1558 230.818 -420.1042
Roof2 1.5D+E+0.5L Max Bottom 130.1601 -24.2663 163.6203 959.1558 161.5134 -766.4337
Roof2 1.5D+E+0.5L Min Top 65.7802 -40.218 84.919 474.0576 113.7258 -585.5271
Roof2 1.5D+E+0.5L Min Bottom 102.3907 -40.218 84.919 474.0576 -39.9461 -929.4123
Roof2 0.9D+W Max Top 11.5999 -5.2342 39.8243 245.4911 20.033 483.0086
Roof2 0.9D+W Max Bottom 21.6627 -5.2342 41.1322 256.598 -13.2983 618.4987
Roof2 0.9D+W Min Top -80.2639 -14.9182 -39.4614 -152.1433 -193.7351 -80.4853
Roof2 0.9D+W Min Bottom -96.8525 -14.9182 -35.8166 -121.1898 -149.9876 -181.7129
Roof2 0.6D+E Max Top 46.1839 -4.4965 87.1326 511.6893 129.0596 -121.7737
Roof2 0.6D+E Max Bottom 60.828 -4.4965 87.1326 511.6893 128.7124 -260.5838
Roof2 0.6D+E Min Top 18.4144 -20.4482 8.4314 26.5911 11.9674 -287.1966
Roof2 0.6D+E Min Bottom 33.0586 -20.4482 8.4314 26.5911 -72.7471 -423.5623
Roof2 0.6D+E-COL Max Top 48.7359 -3.0198 94.3329 556.8228 139.7442 -106.5877
Roof2 0.6D+E-COL Max Bottom 63.3801 -3.0198 94.3329 556.8228 147.1154 -246.2574
Roof2 0.6D+E-COL Min Top 15.8623 -21.9249 1.2311 -18.5424 1.2828 -302.3826
Roof2 0.6D+E-COL Min Bottom 30.5065 -21.9249 1.2311 -18.5424 -91.1501 -437.8887
Roof2 1.5D+E+0.5L-COL Max Top 96.1017 -22.7896 170.8206 1004.2893 241.5026 -404.9182
Roof2 1.5D+E+0.5L-COL Max Bottom 132.7122 -22.7896 170.8206 1004.2893 179.9164 -752.1074
Roof2 1.5D+E+0.5L-COL Min Top 63.2281 -41.6947 77.7187 428.9241 103.0412 -600.7131
Roof2 1.5D+E+0.5L-COL Min Bottom 99.8386 -41.6947 77.7187 428.9241 -58.3491 -943.7386
Roof1 RSx Max Top 0 352.9894 227.5914 1469.1002 67.7008 105.0669
Roof1 RSx Max Bottom 0 352.9894 227.5914 1469.1002 716.3363 1111.0866
Roof1 RSy Max Top 0 216.9254 340.6185 2264.2564 101.3083 64.6025

Page 17 of 25
Analysis Results 9/22/2022

P VX VY T MX MY
Story Load Case/Combo Location
kN kN kN kN-m kN-m kN-m
Roof1 RSy Max Bottom 0 216.9254 340.6185 2264.2564 1072.0711 682.84
Roof1 1.4D Top 374.655 0.0828 0.2129 0.5971 1245.857 -2171.6304
Roof1 1.4D Bottom 449.8685 0.0828 0.2129 0.5971 1539.6659 -2704.6657
Roof1 1.2D+1.6L Top 321.1328 0.0744 0.2037 0.4756 1067.8709 -1861.3974
Roof1 1.2D+1.6L Bottom 385.6015 0.0744 0.2037 0.4756 1319.6466 -2318.2748
Roof1 1.2D+1.6Lr+0.5L Top 503.4012 0.0916 0.2363 0.715 1723.664 -2942.4654
Roof1 1.2D+1.6Lr+0.5L Bottom 567.8699 0.0916 0.2363 0.715 1975.3468 -3399.2939
Roof1 1.2D+1.6Lr+0.5W Max Top 455.4541 0.0857 -0.2569 -0.2332 1551.406 -1954.9797
Roof1 1.2D+1.6Lr+0.5W Max Bottom 519.9228 0.0857 -0.2569 -0.2332 1804.4943 -2411.861
Roof1 1.2D+1.6Lr+0.5W Min Top 335.1036 0.0731 -1.9328 -6.5529 1121.8974 -2658.0545
Roof1 1.2D+1.6Lr+0.5W Min Bottom 399.5723 0.0731 -1.9328 -6.5529 1379.7621 -3114.8997
Roof1 1.2D+W+0.5L+0.5Lr Max Top 282.1976 0.0686 -0.7692 -1.3515 928.2893 -224.2597
Roof1 1.2D+W+0.5L+0.5Lr Max Bottom 346.6663 0.0686 -0.7692 -1.3515 1182.8378 -681.226
Roof1 1.2D+W+0.5L+0.5Lr Min Top 41.4965 0.0432 -4.121 -13.9909 69.2722 -1630.4093
Roof1 1.2D+W+0.5L+0.5Lr Min Bottom 105.9652 0.0432 -4.121 -13.9909 333.3734 -2087.3034
Roof1 1.5D+E+0.5L Max Top 401.416 41.9746 42.9523 284.5371 1347.5492 -2314.2781
Roof1 1.5D+E+0.5L Max Bottom 482.0019 41.9746 42.9523 284.5371 1784.0707 -2766.0123
Roof1 1.5D+E+0.5L Min Top 401.416 -41.7951 -42.4829 -283.2803 1322.1403 -2339.2156
Roof1 1.5D+E+0.5L Min Bottom 482.0019 -41.7951 -42.4829 -283.2803 1515.1715 -3029.6935
Roof1 0.9D+W Max Top 144.9555 0.0436 -0.8362 -1.5352 456.388 578.9234
Roof1 0.9D+W Max Bottom 193.3071 0.0436 -0.8362 -1.5352 648.0384 236.1584
Roof1 0.9D+W Min Top -95.7456 0.0183 -4.188 -14.1746 -402.6291 -827.2263
Roof1 0.9D+W Min Bottom -47.3941 0.0183 -4.188 -14.1746 -201.426 -1169.919
Roof1 0.6D+E Max Top 160.5664 41.9203 42.8088 284.1646 546.6432 -918.23
Roof1 0.6D+E Max Bottom 192.8008 41.9203 42.8088 284.1646 794.3064 -1027.3018
Roof1 0.6D+E Min Top 160.5664 -41.8494 -42.6263 -283.6528 521.2342 -943.1675
Roof1 0.6D+E Min Bottom 192.8008 -41.8494 -42.6263 -283.6528 525.4072 -1290.983
Roof1 0.6D+E-COL Max Top 160.5664 50.0815 50.9131 336.4633 549.0537 -915.7989
Roof1 0.6D+E-COL Max Bottom 192.8008 50.0815 50.9131 336.4633 819.8141 -1001.6114
Roof1 0.6D+E-COL Min Top 160.5664 -50.0106 -50.7306 -335.9516 518.8237 -945.5986
Roof1 0.6D+E-COL Min Bottom 192.8008 -50.0106 -50.7306 -335.9516 499.8995 -1316.6735
Roof1 1.5D+E+0.5L-COL Max Top 401.416 50.1358 51.0566 336.8359 1349.9597 -2311.847
Roof1 1.5D+E+0.5L-COL Max Bottom 482.0019 50.1358 51.0566 336.8359 1809.5783 -2740.3219
Roof1 1.5D+E+0.5L-COL Min Top 401.416 -49.9563 -50.5871 -335.579 1319.7297 -2341.6467
Roof1 1.5D+E+0.5L-COL Min Bottom 482.0019 -49.9563 -50.5871 -335.579 1489.6638 -3055.384
RD RSx Max Top 0 1610.0243 1036.8677 7354.3017 716.3363 1111.0866
RD RSx Max Bottom 0 1660.1324 1069.0168 7694.0618 4033.1044 6261.5835
RD RSy Max Top 0 989.4694 1551.8806 11161.9332 1072.0711 682.84
RD RSy Max Bottom 0 1020.2681 1599.8847 11737.6928 6036.1015 3848.1765
RD 1.4D Top 1705.2929 0.1306 0.6838 1.1194 6482.8208 -10463.4126
RD 1.4D Bottom 1960.9624 0.1291 0.6774 0.9892 7544.7647 -12845.5125
RD 1.2D+1.6L Top 1905.6619 0.0884 0.6415 0.5649 7277.3236 -12129.9292
RD 1.2D+1.6L Bottom 2168.2069 0.0864 0.6303 0.3769 8363.3572 -14648.946
RD 1.2D+1.6Lr+0.5L Top 1782.6924 0.1501 0.7309 1.3442 6750.0514 -11037.5546
RD 1.2D+1.6Lr+0.5L Bottom 2015.4001 0.1482 0.7255 1.2261 7714.8208 -13228.3421
RD 1.2D+1.6Lr+0.5W Max Top 1596.0009 0.1469 0.1993 0.4048 6041.4842 -9062.2155
RD 1.2D+1.6Lr+0.5W Max Bottom 1815.1462 0.1454 0.195 0.3053 6952.9385 -11103.9935
RD 1.2D+1.6Lr+0.5W Min Top 1475.6504 0.1188 -1.5516 -6.2019 5616.7521 -9765.2542
RD 1.2D+1.6Lr+0.5W Min Bottom 1694.7957 0.1177 -1.5575 -6.3165 6533.7242 -11806.9445
RD 1.2D+W+0.5L+0.5Lr Max Top 1561.4888 0.0976 -0.3854 -1.1305 5957.5424 -8319.4867
RD 1.2D+W+0.5L+0.5Lr Max Bottom 1794.1966 0.0963 -0.3933 -1.2711 6925.8321 -10510.6139
RD 1.2D+W+0.5L+0.5Lr Min Top 1320.7877 0.0416 -3.8872 -14.3439 5108.078 -9725.5641
RD 1.2D+W+0.5L+0.5Lr Min Bottom 1553.4954 0.041 -3.8984 -14.5146 6087.4035 -11916.5159
RD 1.5D+E+0.5L Max Top 1965.844 191.1756 195.3787 1501.1863 7618.0228 -12066.8617
RD 1.5D+E+0.5L Max Bottom 2253.338 197.1194 201.386 1573.2345 9433.3117 -14157.092
RD 1.5D+E+0.5L Min Top 1965.844 -190.9105 -193.8788 -1499.0343 7349.1236 -12330.5429
RD 1.5D+E+0.5L Min Bottom 2253.338 -196.8578 -199.9034 -1571.4092 7919.3012 -15643.073
RD 0.9D+W Max Top 1000.3656 0.0628 -0.5891 -1.4058 3825.7808 -4751.6075
RD 0.9D+W Max Bottom 1164.7246 0.0621 -0.5944 -1.5001 4511.7013 -6283.199
RD 0.9D+W Min Top 759.6645 0.0068 -4.0908 -14.6192 2976.3165 -6157.6849

Page 18 of 25
Analysis Results 9/22/2022

P VX VY T MX MY
Story Load Case/Combo Location
kN kN kN kN-m kN-m kN-m
RD 0.9D+W Min Bottom 924.0235 0.0068 -4.0995 -14.7436 3673.2727 -7689.1011
RD 0.6D+E Max Top 730.8398 191.099 194.9218 1500.59 2912.8014 -4352.4791
RD 0.6D+E Max Bottom 840.4125 197.044 200.935 1572.7457 3990.4758 -4762.2292
RD 0.6D+E Min Top 730.8398 -190.9871 -194.3356 -1499.6306 2643.9022 -4616.1603
RD 0.6D+E Min Bottom 840.4125 -196.9333 -200.3544 -1571.8979 2476.4653 -6248.2102
RD 0.6D+E-COL Max Top 730.8398 228.3253 231.8447 1785.5856 2938.309 -4326.7886
RD 0.6D+E-COL Max Bottom 840.4125 235.4289 239.0015 1869.842 4134.0918 -4617.451
RD 0.6D+E-COL Min Top 730.8398 -228.2134 -231.2585 -1784.6262 2618.3945 -4641.8508
RD 0.6D+E-COL Min Bottom 840.4125 -235.3182 -238.4209 -1868.9941 2332.8494 -6392.9883
RD 1.5D+E+0.5L-COL Max Top 1965.844 228.4019 232.3016 1786.1819 7643.5304 -12041.1712
RD 1.5D+E+0.5L-COL Max Bottom 2253.338 235.5043 239.4525 1870.3307 9576.9277 -14012.3138
RD 1.5D+E+0.5L-COL Min Top 1965.844 -228.1368 -230.8016 -1784.0299 7323.6159 -12356.2334
RD 1.5D+E+0.5L-COL Min Bottom 2253.338 -235.2428 -237.9699 -1868.5054 7775.6853 -15787.8511
2nd RSx Max Top 0 2840.7511 1827.8715 13619.2003 4033.1044 6261.5835
2nd RSx Max Bottom 139.861 1324.6122 1000.5193 5248.7893 8998.3432 14428.158
2nd RSy Max Top 0 1745.9584 2735.8828 20590.7607 6036.1015 3848.1765
2nd RSy Max Bottom 128.8071 1023.8638 1584.766 8564.1747 13775.8385 8755.9334
2nd 1.4D Top 3041.5074 -0.0113 0.8097 0.4783 12230.6481 -19676.807
2nd 1.4D Bottom 3189.8271 -118.7502 -34.2072 -342.8515 13238.6159 -21064.0161
2nd 1.2D+1.6L Top 3413.6961 -0.0924 0.7416 -0.4564 13800.1202 -22484.7677
2nd 1.2D+1.6L Bottom 3542.172 -132.825 -39.3499 -404.1545 14743.2327 -23768.0182
2nd 1.2D+1.6Lr+0.5L Top 3041.3652 0.01 0.8718 0.833 12175.1334 -19702.6206
2nd 1.2D+1.6Lr+0.5L Bottom 3163.3998 -118.4143 -33.348 -331.4308 13060.4622 -20879.7245
2nd 1.2D+1.6Lr+0.5W Max Top 2741.3276 0.0262 0.3287 -0.0267 10969.41 -16959.3888
2nd 1.2D+1.6Lr+0.5W Max Bottom 2864.4068 -101.6381 -30.2918 -296.6448 11832.2765 -18144.2656
2nd 1.2D+1.6Lr+0.5W Min Top 2620.9771 0.0005 -1.4606 -6.8252 10550.1957 -17662.3398
2nd 1.2D+1.6Lr+0.5W Min Bottom 2747.7488 -106.7126 -30.701 -297.4626 11419.9008 -18820.5903
2nd 1.2D+W+0.5L+0.5Lr Max Top 2820.1616 -0.0405 -0.2968 -1.9048 11386.1447 -16984.8924
2nd 1.2D+W+0.5L+0.5Lr Max Bottom 2948.9187 -99.4978 -32.8898 -328.6571 12278.3318 -18264.8708
2nd 1.2D+W+0.5L+0.5Lr Min Top 2579.4605 -0.092 -3.8752 -15.5018 10547.7161 -18390.7944
2nd 1.2D+W+0.5L+0.5Lr Min Bottom 2715.6027 -109.6468 -33.7082 -330.2928 11453.5802 -19617.5202
2nd 1.5D+E+0.5L Max Top 3510.8485 337.0415 343.9852 2683.6705 14897.7422 -22095.2193
2nd 1.5D+E+0.5L Max Bottom 3687.4965 23.8859 161.6666 707.1633 16977.5089 -22625.584
2nd 1.5D+E+0.5L Min Top 3510.8485 -337.1175 -342.2204 -2683.1871 13383.7317 -23581.2003
2nd 1.5D+E+0.5L Min Bottom 3652.8689 -297.75 -241.2362 -1510.7712 13513.3584 -26082.3104
2nd 0.9D+W Max Top 1859.3607 -0.0264 -0.536 -1.9534 7524.0549 -10674.7454
2nd 0.9D+W Max Bottom 1957.6387 -62.1864 -22.1463 -219.7587 8176.5723 -11640.9523
2nd 0.9D+W Min Top 1618.6595 -0.078 -4.1145 -15.5504 6685.6263 -12080.6475
2nd 0.9D+W Min Bottom 1724.3228 -72.3353 -22.9647 -221.3944 7351.8207 -12993.6018
2nd 0.6D+E Max Top 1303.5032 337.0746 343.4498 2683.6338 5998.7116 -7689.9268
2nd 0.6D+E Max Bottom 1384.3825 109.925 186.7912 962.0309 7405.7677 -7299.0723
2nd 0.6D+E Min Top 1303.5032 -337.0844 -342.7558 -2683.2238 4484.7011 -9175.9078
2nd 0.6D+E Min Bottom 1349.755 -211.7109 -216.1116 -1255.9036 3941.6173 -10755.7986
2nd 0.6D+E-COL Max Top 1303.5032 402.7615 408.5366 3197.4724 6142.3275 -7545.1486
2nd 0.6D+E-COL Max Bottom 1389.4343 149.6499 223.189 1159.2466 7727.4122 -6964.5746
2nd 0.6D+E-COL Min Top 1303.5032 -402.7712 -407.8426 -3197.0625 4341.0851 -9320.6859
2nd 0.6D+E-COL Min Bottom 1344.7033 -251.4358 -252.5094 -1453.1193 3619.9729 -11090.2963
2nd 1.5D+E+0.5L-COL Max Top 3510.8485 402.7284 409.072 3197.5092 15041.3581 -21950.4411
2nd 1.5D+E+0.5L-COL Max Bottom 3692.5482 63.6108 198.0645 904.379 17299.1533 -22291.0864
2nd 1.5D+E+0.5L-COL Min Top 3510.8485 -402.8043 -407.3072 -3197.0258 13240.1157 -23725.9785
2nd 1.5D+E+0.5L-COL Min Bottom 3647.8172 -337.4749 -277.634 -1707.9869 13191.714 -26416.808
NGL RSx Max Top 139.861 1314.2204 951.7837 5123.9376 8998.3432 14428.158
NGL RSx Max Bottom 139.861 1314.2204 951.7837 5123.9376 7574.4518 12470.3999
NGL RSy Max Top 128.8071 889.2378 1490.9091 8401.1749 13775.8385 8755.9334
NGL RSy Max Bottom 128.8071 889.2378 1490.9091 8401.1749 11540.4256 7473.1213
NGL 1.4D Top 3347.9591 68.1182 109.7402 595.6956 14036.6621 -22218.1188
NGL 1.4D Bottom 3411.5442 68.1182 109.7402 595.6956 14161.5696 -22591.8308
NGL 1.2D+1.6L Top 3677.7137 79.3186 116.4403 627.2989 15427.2723 -24757.2491
NGL 1.2D+1.6L Bottom 3732.2152 79.3186 116.4403 627.2989 15500.7699 -25046.1764
NGL 1.2D+1.6Lr+0.5L Top 3298.9415 65.1837 106.7148 574.6145 13744.5018 -21868.9554

Page 19 of 25
Analysis Results 9/22/2022

P VX VY T MX MY
Story Load Case/Combo Location
kN kN kN kN-m kN-m kN-m
NGL 1.2D+1.6Lr+0.5L Bottom 3353.443 65.1837 106.7148 574.6145 13832.5877 -22179.0851
NGL 1.2D+1.6Lr+0.5W Max Top 2999.9485 58.5023 98.5975 532.0777 12516.3162 -19133.4965
NGL 1.2D+1.6Lr+0.5W Max Bottom 3054.45 58.5023 98.5975 532.0777 12616.578 -19454.1218
NGL 1.2D+1.6Lr+0.5W Min Top 2883.2905 58.1866 96.058 518.7604 12103.9404 -19809.8212
NGL 1.2D+1.6Lr+0.5W Min Bottom 2937.792 58.1866 96.058 518.7604 12208.0114 -20129.973
NGL 1.2D+W+0.5L+0.5Lr Max Top 3084.4604 64.7274 100.5756 543.5403 12962.3715 -19254.1017
NGL 1.2D+W+0.5L+0.5Lr Max Bottom 3138.9619 64.7274 100.5756 543.5403 13059.6662 -19565.8628
NGL 1.2D+W+0.5L+0.5Lr Min Top 2851.1444 64.096 95.4966 516.9056 12137.6199 -20606.7511
NGL 1.2D+W+0.5L+0.5Lr Min Bottom 2905.6459 64.096 95.4966 516.9056 12242.533 -20917.5652
NGL 1.5D+E+0.5L Max Top 3856.9236 237.3263 314.5305 1747.7535 17832.5585 -23862.1227
NGL 1.5D+E+0.5L Max Bottom 3925.0505 237.3263 314.5305 1747.7535 17671.0795 -24487.8086
NGL 1.5D+E+0.5L Min Top 3822.296 -78.2764 -65.3871 -398.3238 14368.408 -27318.849
NGL 1.5D+E+0.5L Min Bottom 3890.4229 -78.2764 -65.3871 -398.3238 14776.5671 -27474.3511
NGL 0.9D+W Max Top 2059.295 43.5097 68.2985 370.8126 8689.602 -12382.8755
NGL 0.9D+W Max Bottom 2100.1711 43.5097 68.2985 370.8126 8773.2728 -12624.4869
NGL 0.9D+W Min Top 1825.979 42.8783 63.2196 344.178 7864.8505 -13735.5249
NGL 0.9D+W Min Bottom 1866.8552 42.8783 63.2196 344.178 7956.1397 -13976.1893
NGL 0.6D+E Max Top 1452.1534 186.9949 236.9903 1328.3367 7747.7876 -7793.6878
NGL 0.6D+E Max Bottom 1479.4041 186.9949 236.9903 1328.3367 7516.5003 -8188.942
NGL 0.6D+E Min Top 1417.5258 -128.6078 -142.9273 -817.7405 4283.6371 -11250.4141
NGL 0.6D+E Min Bottom 1444.7766 -128.6078 -142.9273 -817.7405 4621.9879 -11175.4844
NGL 0.6D+E-COL Max Top 1457.2051 221.0343 271.7191 1516.2457 8069.432 -7459.1901
NGL 0.6D+E-COL Max Bottom 1484.4559 221.0343 271.7191 1516.2457 7786.1862 -7903.5836
NGL 0.6D+E-COL Min Top 1412.4741 -162.6472 -177.6561 -1005.6495 3961.9927 -11584.9118
NGL 0.6D+E-COL Min Bottom 1439.7249 -162.6472 -177.6561 -1005.6495 4352.302 -11460.8428
NGL 1.5D+E+0.5L-COL Max Top 3861.9753 271.3657 349.2593 1935.6624 18154.2029 -23527.625
NGL 1.5D+E+0.5L-COL Max Bottom 3930.1022 271.3657 349.2593 1935.6624 17940.7654 -24202.4502
NGL 1.5D+E+0.5L-COL Min Top 3817.2443 -112.3158 -100.1159 -586.2328 14046.7636 -27653.3467
NGL 1.5D+E+0.5L-COL Min Bottom 3885.3712 -112.3158 -100.1159 -586.2328 14506.8812 -27759.7095

4.3 Modal Results

Table 4.6 - Modal Periods and Frequencies
Circular
Period Frequency Eigenvalue
Case Mode Frequency
sec cyc/sec rad²/sec²
rad/sec
Modal1 1 0.815 1227 7.707 59.3947
Modal1 2 0.705 1.418 8.91 79.3881
Modal1 3 0.574 1.756 11.033 121.7269
Modal1 4 0.397 4.434 27.86 776.1903
Modal1 5 0.236 8.015 50.356 2535.766
Modal1 6 0.132 12.414 78.001 6084.204
Modal1 7 0.076 17.433 109.536 11998.11
Modal1 8 0.048 22.795 143.222 20512.6
Modal1 9 0.035 28.206 177.223 31407.92
Modal1 10 0.028 33.414 209.945 44076.97
Modal1 11 0.025 38.236 240.244 57717.38
Modal1 12 0.024 42.568 267.465 71537.3
Modal1 13 0.023 46.372 291.367 84894.9
Modal1 14 0.022 49.658 312.013 97352.15
Modal1 15 0.022 54.843 344.589 118741.6

Page 20 of 25
Analysis Results 9/22/2022

Table 4.7 - Modal Participating Mass Ratios (Part 1 of 2)

Period
Case Mode UX UY UZ Sum UX Sum UY Sum UZ
sec
Modal1 1 0.815 0.244 0.5178 0 0.244 0.5178 0
Modal1 2 0.705 0.6008 0.2578 0 0.8449 0.7756 0
Modal1 3 0.574 0.0037 0.0146 0 0.8485 0.7902 0
Modal1 4 0.397 0.0015 0.0031 0 0.85 0.7933 0
Modal1 5 0.236 0.0081 0.0039 0 0.8581 0.7972 0
Modal1 6 0.132 0.0033 0.0131 0 0.8614 0.8103 0
Modal1 7 0.076 0.0014 0.0028 0 0.8628 0.8131 0
Modal1 8 0.048 0.0073 0.0035 0 0.8701 0.8166 0
Modal1 9 0.035 0.0030 0.0118 0 0.8731 0.8285 0
Modal1 10 0.028 0.0012 0.0025 0 0.8743 0.8310 0
Modal1 11 0.025 0.0066 0.0032 0 0.8808 0.8341 0
Modal1 12 0.024 0.0027 0.0106 0 0.8835 0.8448 0
Modal1 13 0.023 0.0011 0.0023 0 0.8846 0.8470 0
Modal1 14 0.022 0.0059 0.0028 0 0.8905 0.8499 0
Modal1 15 0.022 0.0024 0.0096 0 0.8930 0.8595 0

Table 4.7 - Modal Participating Mass Ratios (Part 2 of 2)

Case Mode RX RY RZ Sum RX Sum RY Sum RZ

Modal1 1 0.1706 0.0652 0.127 0.1706 0.0652 0.127

Modal1 2 0.0884 0.166 3.033E-05 0.259 0.2312 0.1271
Modal1 3 0.0465 0.0161 0.0018 0.3055 0.2472 0.1288
Modal1 4 0.017 0.0058 0.0895 0.3225 0.253 0.2183
Modal1 5 0.0763 0.1325 0.0004 0.3988 0.3855 0.2187
Modal1 6 0.1024 0.0391 0.0762 0.5012 0.4246 0.2949
Modal1 7 0.0530 0.0996 0 0.5542 0.5242 0.2949
Modal1 8 0.0279 0.0097 0.0011 0.5821 0.5339 0.2960
Modal1 9 0.0102 0.0035 0.0537 0.5923 0.5374 0.3497
Modal1 10 0.0458 0.0795 0.0002 0.6381 0.6169 0.3499
Modal1 11 0.0614 0.0235 0.0457 0.6995 0.6403 0.3957
Modal1 12 0.0318 0.0598 0 0.7313 0.7001 0.3957
Modal1 13 0.0167 0.0058 0.0006 0.7481 0.7059 0.3963
Modal1 14 0.0061 0.0021 0.0322 0.7542 0.7080 0.4285
Modal1 15 0.0275 0.0477 0.0001 0.7816 0.7557 0.4287

Table 4.8 - Modal Participation Factors

Modal Modal
Period UX UY UZ RX RY RZ
Case Mode Mass Stiffness
sec kN-m kN-m kN-m kN-m kN-m kN-m
kN-m-s² kN-m

Modal1 1 0.815 8E-06 -1.1E-05 0 0.017778 0.010989 0.029076 1E-06 6E-05

Modal1 2 0.705 1.2E-05 8E-06 0 -0.012797 0.017535 -0.000449 1E-06 8E-05
Modal1 3 0.574 1E-06 -2E-06 0 -0.009278 -0.005454 -0.003424 1E-06 0.04244
Modal1 4 0.397 -1E-06 1E-06 0 -0.005614 -0.003267 0.024407 1E-06 0.05302
Modal1 5 0.236 1E-06 -1E-06 0 -0.011888 -0.015668 0.001668 1E-06 0.13156
Modal1 6 0.132 1E-06 -2E-06 0 0.016 0.00989 0.026168 1E-06 0.157872
Modal1 7 0.076 -1E-06 1E-06 0 -0.01408 0.015782 -0.00049 1E-06 0.36179
Modal1 8 0.048 1E-06 -1E-06 0 -0.01021 -0.006 -0.00377 1E-06 0.434148
Modal1 9 0.035 1E-07 -2E-07 0 -0.00618 -0.00359 0.021966 1E-06 0.904475
Modal1 10 0.028 1E-07 1E-07 0 -0.01308 -0.01723 0.001501 1E-06 1.08537
Modal1 11 0.025 -1E-07 -1E-07 0 0.0144 0.008901 0.023552 1E-06 2.035069
Modal1 12 0.024 1E-07 -2E-07 0 -0.01548 0.014203 -0.00054 1E-06 2.442083
Modal1 13 0.023 1E-07 1E-07 0 -0.01123 -0.0066 -0.00414 1E-06 4.070138
Modal1 14 0.022 -1E-07 -1E-07 0 -0.00679 -0.00395 0.01977 1E-06 4.884165
Modal1 15 0.022 1E-08 -2E-08 0 -0.01438 -0.01896 0.001351 1E-06 7.122741

Page 21 of 25
Analysis Results 9/22/2022

Table 4.9 - Modal Direction Factors

Period
Case Mode UX UY UZ RZ
sec
Modal1 1 0.815 0.244 0.5178 0 0.127
Modal1 2 0.705 0.6008 0.2578 0 0.000
Modal1 3 0.574 0.0037 0.0146 0 0.0018
Modal1 4 0.397 0.0015 0.0031 0 0.0895
Modal1 5 0.236 0.0081 0.0039 0 0.0004
Modal1 6 0.132 0.0033 0.0131 0 0.0762
Modal1 7 0.076 0.0014 0.0028 0 0
Modal1 8 0.048 0.0073 0.0035 0 0.0011
Modal1 9 0.035 0.003 0.0118 0 0.0537
Modal1 10 0.028 0.0012 0.0025 0 0.0002
Modal1 11 0.025 0.0066 0.0032 0 0.0457
Modal1 12 0.024 0.0027 0.0106 0 0
Modal1 13 0.023 0.0011 0.0023 0 0.0006
Modal1 14 0.022 0.0059 0.0028 0 0.0322
Modal1 15 0.022 0.0024 0.0096 0 0.0001

Page 22 of 25
Design Data 9/22/2022

5 Design Data
This chapter provides design data and results.

5.1 Steel Frame Design

Table 5.1 - Steel Frame Preferences - AISC 360-10

Item Value
Multi-Response Design Step-by-Step - All
Frame Type SMF
Seismic Design Grade D
Importance Factor 1
Design System Rho 1
Design System Sds 0.5
Design System R 8
Design System Omega0 3
Design System Cd 5.5
Design Provision LRFD
Analysis Method Direct Analysis
Second Order Method General 2nd Order
Stiffness Reduction Method Tau-b Fixed
Phi (Bending) 0.9
Phi (Compression) 0.9
Phi (Tension-Yielding) 0.9
Phi (Tension-Fracture) 0.75
Phi (Shear) 0.9
Phi (Shear-Short Webbed Rolled I) 1
Phi (Torsion) 0.9
Ignore Seismic Code? Yes
Ignore Special Seismic Load? Yes
Doubler Plate Plug-Welded? Yes
HSS Welding Type ERW
Reduced HSS Thickness No
Consider Deflection? Yes
DL Ratio 120
SDL+LL Ratio 120
LL Ratio 360
Total Ratio 240
Total Camber Limit 240
Pattern Live Load Factor 0.75
D/C Ratio Limit 0.95

Table 5.2 - Steel Column Envelope (Part 1 of 2)

Cont.
Label Story Section Moment Interaction Check PMM Combo V22 Ratio V33 Ratio Class Plate
cm²
C32 Roof3 W12X19 0.393 = 0.014 + 0.3 + 0.078 1.5D+E+0.5L 0.336 0.037 Seismic HD
C33 Roof3 W12X19 0.467 = 0.006 + 0.356 + 0.104 1.5D+E+0.5L 0.381 0.028 Seismic HD
C36 Roof3 W12X19 0.393 = 0.001 + 0.197 + 0.195 1.2D+1.6Lr+0.5L 0.046 0.021 Seismic HD
C17 Roof2 W12X19 0.369 = 0.011 + 0.275 + 0.083 1.2D+1.6Lr+0.5L 0.12 0.011 Seismic HD
C31 Roof2 W12X19 0.33 = 0.032 + 0.23 + 0.068 1.5D+E+0.5L 0.045 0.006 Seismic HD
C35 Roof2 W12X19 0.383 = 0.002 + 0.026 + 0.355 1.5D+E+0.5L 0.046 0.021 Seismic HD

Table 5.2 - Steel Column Envelope (Part 2 of 2)

Dbl. Plate B/C Ratio B/C Ratio

Label Story
mm Major Minor

C32 Roof3 0 0
C33 Roof3 0 0
C36 Roof3
C17 Roof2
C31 Roof2 0 0

Page 23 of 25
Design Data 9/22/2022

Dbl. Plate B/C Ratio B/C Ratio

Label Story
mm Major Minor

C35 Roof2 0 0

Table 5.3 - Steel Beam Envelope

Conn. V Conn. V
Moment Interaction V22
Label Story Section PMM Combo V33 Ratio Class I-End J-End
Check Ratio
kN kN

B80 Roof3 W12X19 0.787 = 0.278 + 0.51 + 0 1.2D+1.6Lr+0.5L 0.075 0 Seismic HD 0 20.5444
0.046 = 0.004 + 0.039 +
B82 Roof3 W12X19 1.2D+1.6Lr+0.5L 0.015 0 Seismic HD 4.2229 0
0.003
B84 Roof3 W12X19 0.837 = 0.43 + 0.407 + 0 1.2D+1.6Lr+0.5L 0.067 0 Seismic HD 0 18.4557
0.047 = 0.006 + 0.037 +
B87 Roof3 W12X19 1.2D+1.6Lr+0.5L 0.015 0 Seismic HD 4.1112 0
0.003
0.817 = 0.002 + 0.815 +
B91 Roof3 W12X19 1.2D+1.6Lr+0.5L 0.069 0 Seismic HD 0 19.1409
0.001
0.041 = 0.001 + 0.036 +
B92 Roof3 W12X19 1.2D+1.6Lr+0.5L 0.015 0 Seismic HD 3.9994 0
0.004
0.384 = 0.024 + 0.345 +
B93 Roof3 W12X19 1.2D+1.6Lr+0.5L 0.083 0.001 Seismic HD 22.9486 15.9031
0.015
0.229 = 0.035 + 0.183 +
B94 Roof3 W12X19 1.2D+1.6Lr+0.5L 0.037 0.0002602 Seismic HD 3.1772 10.2536
0.011
0.224 = 0.035 + 0.177 +
B95 Roof3 W12X19 1.5D+E+0.5L 0.031 0.0001771 Seismic HD 8.4116 6.1832
0.011
B96 Roof3 W12X19 0.341 = 0.03 + 0.294 + 0.017 1.5D+E+0.5L 0.069 0.0004449 Seismic HD 14.4184 19.1082
0.629 = 0.463 + 0.165 +
B45 Roof2 W8X10 1.2D+1.6Lr+0.5L 0.065 0 Seismic MD 0 4.5834
0.002
0.237 = 0.038 + 0.196 +
B76 Roof2 W8X10 1.5D+E+0.5L 0.056 0 Seismic MD 0 5.4057
0.003

Table 5.4 - Steel Frame Summary - AISC 360-10 (Part 1 of 2)

Unique Design Design PMM M Major

Story Label Status PMM Combo P Ratio
Name Type Section Ratio Ratio

Roof3 C32 160 Column W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.196 0.002 0.089
Roof3 C32 Column W12X19 No Message 1.5D+E+0.5L(T) 0.393 0.014 0.3
Roof3 C33 165 Column W12X19 No Message 1.5D+E+0.5L(C) 0.467 0.006 0.356
Roof3 C33 Column W12X19 No Message 1.2D+W+0.5L+0.5Lr(T) 0.268 0.006 0.203
Roof3 C36 173 Column W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.393 0.001 0.197
Roof3 C36 Column W12X19 No Message 1.5D+E+0.5L(T) 0.347 0.002 0.132
Roof2 C17 162 Column W12X19 No Message 1.2D+1.6Lr+0.5L(T) 0.369 0.011 0.275
Roof2 C31 156 Column W12X19 No Message 1.5D+E+0.5L(T) 0.33 0.032 0.23
Roof2 C35 170 Column W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.343 0.002 0.017
Roof2 C35 Column W12X19 No Message 1.5D+E+0.5L(T) 0.383 0.002 0.026
Roof3 B80 157 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.787 0.278 0.51
Roof3 B82 159 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(T) 0.046 0.004 0.039
Roof3 B84 163 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.837 0.43 0.407
Roof3 B84 Beam W12X19 No Message 1.2D+W+0.5L+0.5Lr(T) 0.409 0.001 0.408
Roof3 B87 164 Beam W12X19 No Message 0.9D+W(C) 0.029 0.002 0.026
Roof3 B87 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(T) 0.047 0.006 0.037
Roof3 B91 171 Beam W12X19 No Message 0.9D+W(C) 0.274 0 0.274
Roof3 B91 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(T) 0.817 0.002 0.815
Roof3 B92 172 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(T) 0.041 0.001 0.036
Roof3 B93 174 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.384 0.024 0.345
Roof3 B94 175 Beam W12X19 No Message 1.2D+1.6Lr+0.5L(C) 0.229 0.035 0.183
Roof3 B95 176 Beam W12X19 No Message 1.5D+E+0.5L(C) 0.224 0.035 0.177
Roof3 B96 177 Beam W12X19 No Message 1.5D+E+0.5L(C) 0.341 0.03 0.294
Roof2 B45 145 Beam W8X10 No Message 1.2D+1.6Lr+0.5L(C) 0.629 0.463 0.165
Roof2 B76 147 Beam W8X10 No Message 1.5D+E+0.5L(C) 0.237 0.038 0.196

Table 5.4 - Steel Frame Summary - AISC 360-10 (Part 2 of 2)

Page 24 of 25
Design Data 9/22/2022

Unique M Minor V Major V Minor

Story Label V Major Combo V Minor Combo Message
Name Ratio Ratio Ratio
Roof3 C32 160 0.105 1.5D+E+0.5L 0.336 1.2D+1.6Lr+0.5L 0.037
Roof3 C32 0.078
Roof3 C33 165 0.104 1.2D+1.6Lr+0.5L 0.381 0.9D+W 0.028
Roof3 C33 0.059
Roof3 C36 173 0.195 1.2D+1.6Lr+0.5L 0.046 1.5D+E+0.5L 0.021
Roof3 C36 0.213
Roof2 C17 162 0.083 1.2D+1.6Lr+0.5L 0.12 1.5D+E+0.5L 0.011
Roof2 C31 156 0.068 1.2D+W+0.5L+0.5Lr 0.045 0.9D+W 0.006
Roof2 C35 170 0.324 1.2D+1.6Lr+0.5L 0.046 1.5D+E+0.5L 0.021
Roof2 C35 0.355
Roof3 B80 157 0 1.2D+1.6Lr+0.5L 0.075 1.2D+1.6Lr+0.5L 0
Roof3 B82 159 0.003 1.2D+1.6Lr+0.5L 0.015 1.2D+1.6Lr+0.5L 0
Roof3 B84 163 0 1.2D+1.6Lr+0.5L 0.067 1.5D+E+0.5L 0
Roof3 B84 0.0001698
Roof3 B87 164 0.001 1.2D+1.6Lr+0.5L 0.015 1.5D+E+0.5L 0
Roof3 B87 0.003
Roof3 B91 171 0 1.2D+1.6Lr+0.5L 0.069 1.2D+1.6Lr+0.5L 0
Roof3 B91 0.001
Roof3 B92 172 0.004 1.2D+1.6Lr+0.5L 0.015 1.2D+1.6Lr+0.5L 0
Roof3 B93 174 0.015 1.2D+1.6Lr+0.5L 0.083 1.2D+1.6Lr+0.5L 0.001
Roof3 B94 175 0.011 1.2D+1.6Lr+0.5L 0.037 1.2D+1.6Lr+0.5L 0.0002602
Roof3 B95 176 0.011 1.5D+E+0.5L 0.031 1.5D+E+0.5L 0.0001771
Roof3 B96 177 0.017 1.5D+E+0.5L 0.069 1.5D+E+0.5L 0.0004449
Roof2 B45 145 0.002 1.2D+1.6Lr+0.5L 0.065 0.9D+W 0
Roof2 B76 147 0.003 1.2D+1.6Lr+0.5L 0.056 1.2D+1.6Lr+0.5L 0

Page 25 of 25
DESIGN OF
SLAB
DESIGN OF
BEAM
DESIGN OF
COLUMN
DESIGN OF
FOOTING
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PH 2, DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: SX @ 2ND Date: Sep-22-2022 Date:

SLAB DESIGN ALONG X-AXIS

@ SECOND FLOOR

TOP BAR REINFORCEMENT BOTTOM BAR REINFORCEMENT

LOAD RANGE (kNm/m) REINFORCEMENT LOAD RANGE (kNm/m) REINFORCEMENT
for 110mm THK DIA. SPACING for 110mm THK DIA. SPACING
0.00 -> -4.73 Ø10 300 0.00 -> 4.73 Ø10 300
-4.73 -> -5.14 Ø10 275 4.73 -> 5.14 Ø10 275
-5.14 -> -5.64 Ø10 250 5.14 -> 5.64 Ø10 250
-5.64 -> -6.24 Ø10 225 5.64 -> 6.24 Ø10 225
-6.24 -> -6.63 Ø12 300 6.24 -> 6.63 Ø12 300
-6.63 -> -6.99 Ø10 200 6.63 -> 6.99 Ø10 200
-6.99 -> -7.21 Ø12 275 6.99 -> 7.21 Ø12 275
-7.21 -> -7.89 Ø12 250 7.21 -> 7.89 Ø12 250
-7.89 -> -7.94 Ø10 175 7.89 -> 7.94 Ø10 175
-7.94 -> -8.72 Ø12 225 7.94 -> 8.72 Ø12 225
-8.72 -> -9.19 Ø10 150 8.72 -> 9.19 Ø10 150
-9.19 -> -9.74 Ø12 200 9.19 -> 9.74 Ø12 200
-9.74 -> -10.90 Ø10 125 9.74 -> 10.90 Ø10 125
-10.90 -> -11.03 Ø12 175 10.90 -> 11.03 Ø12 175
-11.03 -> -12.71 Ø12 150 11.03 -> 12.71 Ø12 150
-12.71 -> -13.39 Ø10 100 12.71 -> 13.39 Ø10 100
-13.39 -> -14.99 Ø12 125 13.39 -> 14.99 Ø12 125
-14.99 -> -18.24 Ø12 100 14.99 -> 18.24 Ø12 100
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PH 2, DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: SY @ 2ND Date: Sep-22-2022 Date:

SLAB DESIGN ALONG Y-AXIS

@ SECOND FLOOR

TOP BAR REINFORCEMENT BOTTOM BAR REINFORCEMENT

LOAD RANGE (kNm/m) REINFORCEMENT LOAD RANGE (kNm/m) REINFORCEMENT
for 110mm THK DIA. SPACING for 110mm THK DIA. SPACING
0.00 -> -4.73 Ø10 300 0.00 -> 4.73 Ø10 300
-4.73 -> -5.14 Ø10 275 4.73 -> 5.14 Ø10 275
-5.14 -> -5.64 Ø10 250 5.14 -> 5.64 Ø10 250
-5.64 -> -6.24 Ø10 225 5.64 -> 6.24 Ø10 225
-6.24 -> -6.63 Ø12 300 6.24 -> 6.63 Ø12 300
-6.63 -> -6.99 Ø10 200 6.63 -> 6.99 Ø10 200
-6.99 -> -7.21 Ø12 275 6.99 -> 7.21 Ø12 275
-7.21 -> -7.89 Ø12 250 7.21 -> 7.89 Ø12 250
-7.89 -> -7.94 Ø10 175 7.89 -> 7.94 Ø10 175
-7.94 -> -8.72 Ø12 225 7.94 -> 8.72 Ø12 225
-8.72 -> -9.19 Ø10 150 8.72 -> 9.19 Ø10 150
-9.19 -> -9.74 Ø12 200 9.19 -> 9.74 Ø12 200
-9.74 -> -10.90 Ø10 125 9.74 -> 10.90 Ø10 125
-10.90 -> -11.03 Ø12 175 10.90 -> 11.03 Ø12 175
-11.03 -> -12.71 Ø12 150 11.03 -> 12.71 Ø12 150
-12.71 -> -13.39 Ø10 100 12.71 -> 13.39 Ø10 100
-13.39 -> -14.99 Ø12 125 13.39 -> 14.99 Ø12 125
-14.99 -> -18.24 Ø12 100 14.99 -> 18.24 Ø12 100
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PH 2, DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: SX @ RD Date: Sep-22-2022 Date:

SLAB DESIGN ALONG X-AXIS

@ ROOF DECK

TOP BAR REINFORCEMENT BOTTOM BAR REINFORCEMENT

LOAD RANGE (kNm/m) REINFORCEMENT LOAD RANGE (kNm/m) REINFORCEMENT
for 110mm THK DIA. SPACING for 110mm THK DIA. SPACING
0.00 -> -4.73 Ø10 300 0.00 -> 4.73 Ø10 300
-4.73 -> -5.14 Ø10 275 4.73 -> 5.14 Ø10 275
-5.14 -> -5.64 Ø10 250 5.14 -> 5.64 Ø10 250
-5.64 -> -6.24 Ø10 225 5.64 -> 6.24 Ø10 225
-6.24 -> -6.63 Ø12 300 6.24 -> 6.63 Ø12 300
-6.63 -> -6.99 Ø10 200 6.63 -> 6.99 Ø10 200
-6.99 -> -7.21 Ø12 275 6.99 -> 7.21 Ø12 275
-7.21 -> -7.89 Ø12 250 7.21 -> 7.89 Ø12 250
-7.89 -> -7.94 Ø10 175 7.89 -> 7.94 Ø10 175
-7.94 -> -8.72 Ø12 225 7.94 -> 8.72 Ø12 225
-8.72 -> -9.19 Ø10 150 8.72 -> 9.19 Ø10 150
-9.19 -> -9.74 Ø12 200 9.19 -> 9.74 Ø12 200
-9.74 -> -10.90 Ø10 125 9.74 -> 10.90 Ø10 125
-10.90 -> -11.03 Ø12 175 10.90 -> 11.03 Ø12 175
-11.03 -> -12.71 Ø12 150 11.03 -> 12.71 Ø12 150
-12.71 -> -13.39 Ø10 100 12.71 -> 13.39 Ø10 100
-13.39 -> -14.99 Ø12 125 13.39 -> 14.99 Ø12 125
-14.99 -> -18.24 Ø12 100 14.99 -> 18.24 Ø12 100
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PH 2, DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: SY @ RD Date: Sep-22-2022 Date:

SLAB DESIGN ALONG Y-AXIS

@ ROOF DECK

TOP BAR REINFORCEMENT BOTTOM BAR REINFORCEMENT

LOAD RANGE (kNm/m) REINFORCEMENT LOAD RANGE (kNm/m) REINFORCEMENT
for 110mm THK DIA. SPACING for 110mm THK DIA. SPACING
0.00 -> -4.73 Ø10 300 0.00 -> 4.73 Ø10 300
-4.73 -> -5.14 Ø10 275 4.73 -> 5.14 Ø10 275
-5.14 -> -5.64 Ø10 250 5.14 -> 5.64 Ø10 250
-5.64 -> -6.24 Ø10 225 5.64 -> 6.24 Ø10 225
-6.24 -> -6.63 Ø12 300 6.24 -> 6.63 Ø12 300
-6.63 -> -6.99 Ø10 200 6.63 -> 6.99 Ø10 200
-6.99 -> -7.21 Ø12 275 6.99 -> 7.21 Ø12 275
-7.21 -> -7.89 Ø12 250 7.21 -> 7.89 Ø12 250
-7.89 -> -7.94 Ø10 175 7.89 -> 7.94 Ø10 175
-7.94 -> -8.72 Ø12 225 7.94 -> 8.72 Ø12 225
-8.72 -> -9.19 Ø10 150 8.72 -> 9.19 Ø10 150
-9.19 -> -9.74 Ø12 200 9.19 -> 9.74 Ø12 200
-9.74 -> -10.90 Ø10 125 9.74 -> 10.90 Ø10 125
-10.90 -> -11.03 Ø12 175 10.90 -> 11.03 Ø12 175
-11.03 -> -12.71 Ø12 150 11.03 -> 12.71 Ø12 150
-12.71 -> -13.39 Ø10 100 12.71 -> 13.39 Ø10 100
-13.39 -> -14.99 Ø12 125 13.39 -> 14.99 Ø12 125
-14.99 -> -18.24 Ø12 100 14.99 -> 18.24 Ø12 100
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: FTB Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 5.226m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.10
250 -Mu: -48.11kNm SAFE 0.33

200
Midspan
+Mu: 48.11kNm SAFE 0.11
150
-Mu: -48.11kNm SAFE 0.14
100 Right Support
50
+Mu: 48.11kNm SAFE 0.09
-Mu: -48.11kNm SAFE 0.17
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
10 200

5
150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100

-5

50
-10

0
-15
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-20 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -6.06kNm 2.53kNm -1.75kNm Vu = 10.8 kN 3.4 kN 8.8 kN
+Mu = 4.85kNm 5.49kNm 4.47kNm Tu = 0.7 kNm 0.7 kNm 0.7 kNm
-Mu = -16.04kNm -6.58kNm -8.25kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.10 Dia = 10 mm Left Right
Midspan
0.00 fyt = 275 Mpa Support Support
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.10 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.20 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-0.30 2@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-0.40 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-0.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.06 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/28182 L/379686 L/11444 Tu(D)/φTn: 0.05 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.1MPa
∴ OK ∴ OK τRact = 0.1MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 50 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 50 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: SB Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.841m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.63
250 -Mu: -48.11kNm SAFE 0.45

200
Midspan
+Mu: 48.11kNm SAFE 0.44
150
-Mu: -48.11kNm SAFE 0.46
100 Right Support
50
+Mu: 48.11kNm SAFE 0.45
-Mu: -48.11kNm SAFE 0.85
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
40 200

30

20 150

10
100
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-10
50
-20

-30 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-40

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 4.29kNm 2.80kNm -10.01kNm Vu = 25.7 kN 25.7 kN 33.4 kN
+Mu = 30.38kNm 20.97kNm 21.47kNm Tu = 1.5 kNm 1.5 kNm 1.5 kNm
-Mu = -21.67kNm -22.25kNm -40.74kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.10 Dia = 10 mm Left Right
0.05 Midspan
0.00 fyt = 275 Mpa Support Support
-0.05 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.10 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.15
-0.20 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-0.25
-0.30
5@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-0.35 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-0.40
-0.45 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.20 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/20636 L/110167 L/7248 Tu(D)/φTn: 0.09 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.4MPa
∴ OK ∴ OK τRact = 0.5MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B1 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 5.226m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 3pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.40
250 -Mu: -69.84kNm SAFE 0.76

200
Midspan
+Mu: 48.11kNm SAFE 0.48
150
-Mu: -48.11kNm SAFE 0.31
100 Right Support
50
+Mu: 48.11kNm SAFE 0.36
-Mu: -48.11kNm SAFE 0.83
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
30 200

20

10 150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-10

-20
50
-30

-40 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-50

-60 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -26.33kNm 15.27kNm -17.84kNm Vu = 44.9 kN 11.1 kN 39.0 kN
+Mu = 19.37kNm 22.86kNm 17.16kNm Tu = 8.1 kNm 5.5 kNm 8.5 kNm
-Mu = -52.81kNm -14.97kNm -40.07kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00
fyt = 275 Mpa Support Support
-4.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-6.00

-8.00
1@50, 4@100, Tu(D) = 0.1kNm 0.0kNm 0.5kNm
-10.00
8@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-12.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-14.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.26 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/611 L/2175 L/420 Tu(D)/φTn: 0.51 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 5mm Camber Required ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.6MPa
∴ OK ∴ OK τRact = 0.6MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B2 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.375m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.12
250 -Mu: -48.11kNm SAFE 0.10

200
Midspan
+Mu: 48.11kNm SAFE 0.04
150
-Mu: -48.11kNm SAFE 0.70
100 Right Support
50
+Mu: 48.11kNm SAFE 0.00
-Mu: -69.84kNm SAFE 0.67
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
10 250

0 200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-10 150

-20 100

-30 50

-40 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 3.86kNm -8.73kNm -26.76kNm Vu = 0.0 kN 37.9 kN 47.2 kN
+Mu = 5.56kNm 2.04kNm 0.00kNm Tu = 6.7 kNm 7.5 kNm 8.7 kNm
-Mu = -4.96kNm -33.86kNm -46.72kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-0.50 fyt = 275 Mpa Support Support
-1.00 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.50 1@50, 4@75, Tu(D) = 0.0kNm 0.0kNm 0.7kNm
-2.00 7@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-2.50 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-3.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.22 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/1637 L/8127 L/570 Tu(D)/φTn: 0.47 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.6MPa
∴ OK ∴ OK τRact = 0.7MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B3 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.428m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.29
250 -Mu: -48.11kNm SAFE 0.04

200
Midspan
+Mu: 48.11kNm SAFE 0.32
150
-Mu: -48.11kNm SAFE 0.23
100 Right Support
50
+Mu: 48.11kNm SAFE 0.03
-Mu: -69.84kNm SAFE 0.58
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
20 200

10
150
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
100
-10

-20
50

-30
0
-40 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 0.96kNm 10.47kNm -27.75kNm Vu = 15.2 kN 6.9 kN 46.8 kN
+Mu = 13.78kNm 15.43kNm 1.40kNm Tu = 4.5 kNm 5.8 kNm 6.1 kNm
-Mu = -1.81kNm -11.08kNm -40.58kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.20 Dia = 10 mm Left Right
0.00 Midspan
-0.20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 fyt = 275 Mpa Support Support
-0.40
-0.60
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.80 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-1.00
-1.20 3@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-1.40 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-1.60
-1.80 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.28 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/6550 L/22554 L/2158 Tu(D)/φTn: 0.37 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.2MPa
∴ OK ∴ OK τRact = 0.6MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 50 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 50 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B4 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 4.181m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 3pcs - 16mmØ TB = 3pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 5pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.22
250 -Mu: -69.84kNm SAFE 0.80

200
Midspan
+Mu: 106.16kNm SAFE 0.81
150
-Mu: -72.28kNm SAFE 0.70
100 Right Support
50
+Mu: 48.11kNm SAFE 0.31
-Mu: -69.84kNm SAFE 0.35
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
80 200

60
150
40

20
100

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
50
-20

-40
0
-60 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-80 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -25.98kNm 20.28kNm -12.06kNm Vu = 64.1 kN 22.0 kN 29.8 kN
+Mu = 10.63kNm 86.34kNm 14.92kNm Tu = 5.2 kNm 6.5 kNm 5.9 kNm
-Mu = -56.14kNm -50.40kNm -24.20kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
-0.50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-1.00
fyt = 275 Mpa Support Support
-1.50 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-2.00
-2.50
1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-3.00 9@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-3.50
-4.00
@300 ALfy(min): 0.0kN 0.0kN 0.0kN
-4.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.36 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/2174 L/7752 L/1093 Tu(D)/φTn: 0.36 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-1.5% Vsact = 24.1kN τLact = 0.9MPa
∴ OK ∴ OK τRact = 0.4MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B5 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.5m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.01
250 -Mu: -48.11kNm SAFE 0.08

200
Midspan
+Mu: 48.11kNm SAFE 0.01
150
-Mu: -48.11kNm SAFE 0.34
100 Right Support
50
+Mu: 48.11kNm SAFE 0.00
-Mu: -48.11kNm SAFE 0.46
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
5 200

0
150
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-5
100

-10

50
-15

0
-20
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-25 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -0.10kNm -4.66kNm -12.85kNm Vu = 0.0 kN 15.6 kN 19.9 kN
+Mu = 0.72kNm 0.69kNm 0.12kNm Tu = 4.0 kNm 4.9 kNm 4.8 kNm
-Mu = -3.83kNm -16.57kNm -22.35kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
-0.20
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
fyt = 275 Mpa Support Support
-0.40
-0.60 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.80 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-1.00
15@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-1.20
-1.40
@300 ALfy(min): 0.0kN 0.0kN 0.0kN
-1.60 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.12 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/3099 L/11971 L/1041 Tu(D)/φTn: 0.28 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.2MPa
∴ OK ∴ OK τRact = 0.3MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 50 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 50 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B6 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.901m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.13
250 -Mu: -48.11kNm SAFE 0.54

200
Midspan
+Mu: 48.11kNm SAFE 0.20
150
-Mu: -48.11kNm SAFE 0.37
100 Right Support
50
+Mu: 48.11kNm SAFE 0.12
-Mu: -69.84kNm SAFE 0.67
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
20 200

10
150
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
100
-10

-20
50

-30
0
-40 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -13.68kNm 6.79kNm -24.70kNm Vu = 22.8 kN 3.5 kN 38.8 kN
+Mu = 6.43kNm 9.74kNm 5.75kNm Tu = 4.3 kNm 4.4 kNm 4.4 kNm
-Mu = -26.06kNm -17.68kNm -46.84kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.30 Dia = 10 mm Left Right
0.20 Midspan
0.10 fyt = 275 Mpa Support Support
0.00
-0.10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.20 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-0.30
-0.40 2@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-0.50 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-0.60
-0.70 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.23 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/21440 L/45462 L/6370 Tu(D)/φTn: 0.30 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.3MPa
∴ OK ∴ OK τRact = 0.5MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 100 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 100 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B7 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.589m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 4pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.48
250 -Mu: -48.11kNm SAFE 0.48

200
Midspan
+Mu: 48.11kNm SAFE 0.43
150
-Mu: -48.11kNm SAFE 0.59
100 Right Support
50
+Mu: 51.60kNm SAFE 0.21
-Mu: -84.93kNm SAFE 0.64
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
30 200

20

10 150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-10

-20
50
-30

-40 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-50

-60 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -0.42kNm 2.36kNm -24.38kNm Vu = 37.0 kN 37.0 kN 56.8 kN
+Mu = 22.90kNm 20.83kNm 10.59kNm Tu = 13.8 kNm 5.3 kNm 9.3 kNm
-Mu = -23.00kNm -28.57kNm -54.75kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.40 Dia = 10 mm Left Right
Midspan
0.30 fyt = 275 Mpa Support Support
0.20 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
0.10 1@50, 4@100, Tu(D) = 5.8kNm 0.0kNm 1.3kNm
0.00 4@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.10 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-0.20 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.34 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/23205 L/76201 L/7581 Tu(D)/φTn: 0.71 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 22.6kN τRmax = 2.7MPa
ρact = 0.6%-1.2% Vsact = 22.6kN τLact = 2.4MPa
∴ OK ∴ OK τRact = 0.9MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 161.8 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B8 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 5.533m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 4pcs - 16mmØ TB = 2pcs - 16mmØ TB = 4pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 4pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 51.60kNm SAFE 0.52
250 -Mu: -84.93kNm SAFE 0.88

200
Midspan
+Mu: 84.93kNm SAFE 0.82
150
-Mu: -51.60kNm SAFE 0.28
100 Right Support
50
+Mu: 51.60kNm SAFE 0.46
-Mu: -84.93kNm SAFE 0.85
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
80 200

60

40 150

20
100
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-20
50
-40

-60 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-80

-100 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -40.92kNm 41.21kNm -33.88kNm Vu = 79.4 kN 30.3 kN 68.1 kN
+Mu = 26.61kNm 69.97kNm 23.75kNm Tu = 5.6 kNm 6.3 kNm 9.0 kNm
-Mu = -74.62kNm -14.60kNm -72.20kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
-5.00
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
fyt = 275 Mpa Support Support
-10.00
-15.00 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-20.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 1.0kNm
-25.00
14@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-30.00
-35.00
@300 ALfy(min): 0.0kN 0.0kN 0.0kN
-40.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.48 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/354 L/1570 L/149 Tu(D)/φTn: 0.54 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 196.2kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 10mm Camber Required ρmin = 0.3% Vsmin = 22.6kN τRmax = 2.7MPa
ρact = 0.6%-1.2% Vsact = 39.2kN τLact = 1.2MPa
∴ OK ∴ OK τRact = 1.1MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 161.8 mm 161.8 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B9 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.641478 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.1701m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 300 mm bf = 300 mm bf = 300 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 7pcs - 16mmØ TB = 7pcs - 16mmØ TB = 7pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 3pcs - 16mmØ BB = 3pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 76.40kNm SAFE 0.74
250 -Mu: -149.65kNm SAFE 0.28

200
Midspan
+Mu: 76.40kNm SAFE 0.32
150
-Mu: -149.65kNm SAFE 0.68
100 Right Support
50
+Mu: 55.96kNm SAFE 0.00
-Mu: -148.69kNm SAFE 0.94
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
100 500

400
50
300

0
200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

100
-50

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-100
100

-150 200

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 9.80kNm -35.58kNm -81.95kNm Vu = 167.4 kN 167.4 kN 169.9 kN
+Mu = 56.79kNm 24.76kNm 0.00kNm Tu = 16.7 kNm 16.7 kNm 16.7 kNm
-Mu = -41.40kNm -101.10kNm -140.15kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 2 (4Legs) DESIGN FOR TORSION
0.60 Dia = 12 mm Left Right
Midspan
0.50 fyt = 275 Mpa Support Support
0.40
Spacing: φTcr = 15.4kNm 15.4kNm 15.4kNm
0.30
1@50, 2@100, Tu(D) = 1.3kNm 1.3kNm 1.3kNm
0.20
2@100, Rest φTth = 3.9kNm 3.9kNm 3.9kNm
0.10
Ø7.071067811865 ALfy(min): 0.0kN 0.0kN 0.0kN
0.00
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 48@300 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.47 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/4954 L/25277 L/2094 Tu(D)/φTn: 0.27 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 300.5kN τLmax = 2.8MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 34.7kN τRmax = 2.7MPa
ρact = 0.4%-1.4% Vsact = 127.9kN τLact = 1.7MPa
∴ OK ∴ OK τRact = 1.7MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 165.1 mm 165.1 mm
Provided: 100 mm OK 100 mm OK

FOR TORSION LEFT RIGHT

Required: 312.0 mm 312.0 mm
Provided: 100 mm OK 100 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B10 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.641478 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.9664m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 300 mm bf = 300 mm bf = 300 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 7pcs - 16mmØ TB = 7pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 7pcs - 16mmØ BB = 7pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 55.96kNm SAFE 0.00
250 -Mu: -148.69kNm SAFE 0.82

200
Midspan
+Mu: 151.36kNm SAFE 0.56
150
-Mu: -151.36kNm SAFE 0.50
100 Right Support
50
+Mu: 148.69kNm SAFE 0.94
-Mu: -55.96kNm SAFE 0.02
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
200 500

150 400

100 300

50 200

0 100
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-50 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-100 100

-150 200

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -76.16kNm -2.73kNm 78.58kNm Vu = 133.4 kN 132.4 kN 0.0 kN
+Mu = 0.00kNm 85.11kNm 139.41kNm Tu = 17.8 kNm 12.5 kNm 6.4 kNm
-Mu = -122.58kNm -75.42kNm -0.94kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 2 (4Legs) DESIGN FOR TORSION
0.00 Dia = 12 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00 fyt = 275 Mpa Support Support
-4.00 Spacing: φTcr = 15.4kNm 15.4kNm 15.4kNm
-6.00 1@50, 2@100, Tu(D) = 2.3kNm 0.0kNm 0.0kNm
-8.00 5@100, Rest φTth = 3.9kNm 3.9kNm 3.9kNm
-10.00 Ø10@300 ALfy(min): 0.0kN 0.0kN 0.0kN
-12.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.33 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/328 L/1866 L/176 Tu(D)/φTn: 0.29 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 311.2kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 34.7kN τRmax = 2.7MPa
ρact = 0.4%-1.4% Vsact = 100.4kN τLact = 1.4MPa
∴ OK ∴ OK τRact = 1.4MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 165.1 mm 165.1 mm
Provided: 100 mm OK 100 mm OK

FOR TORSION LEFT RIGHT

Required: 312.0 mm 312.0 mm
Provided: 100 mm OK 100 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B11 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.641478 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.4962m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 300 mm bf = 300 mm bf = 300 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 7pcs - 16mmØ BB = 7pcs - 16mmØ BB = 7pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 128.78kNm SAFE 0.47
250 -Mu: -49.23kNm SAFE 0.32

200
Midspan
+Mu: 134.11kNm SAFE 0.31
150
-Mu: -51.02kNm SAFE 0.69
100 Right Support
50
+Mu: 137.84kNm SAFE 0.02
-Mu: -52.28kNm SAFE 0.89
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
80 350

300
60
250
40
200

20 150

0 100
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
50
-20
0
-40 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
50

-60 100

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 24.93kNm -2.19kNm -29.07kNm Vu = 68.0 kN 66.7 kN 66.7 kN
+Mu = 61.07kNm 41.72kNm 2.90kNm Tu = 26.9 kNm 23.8 kNm 21.7 kNm
-Mu = -15.61kNm -35.24kNm -46.56kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.35 Dia = 12 mm Left Right
0.30 Midspan
0.25 fyt = 275 Mpa Support Support
0.20
0.15
Spacing: φTcr = 15.4kNm 15.4kNm 15.4kNm
0.10 1@50, 4@75, Tu(D) = 11.4kNm 8.4kNm 6.3kNm
0.05
0.00 1@150, Rest φTth = 3.9kNm 3.9kNm 3.9kNm
-0.05 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Ø10@300
-0.10
ALfy(min): -135.2kN -44.1kN -135.2kN
-0.15 ALfy(req): 111.5kN 81.9kN 61.1kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.33 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/9522 L/53179 L/5137 Tu(D)/φTn: 0.62 SAFE %(MB) : 14.85% 10.91% 8.14%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 311.2kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 35.9kN τRmax = 2.7MPa
ρact = 0.4%-1.4% Vsact = 35.9kN τLact = 1.8MPa
∴ OK ∴ OK τRact = 1.1MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 171.0 mm 171.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 187.0 mm 187.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B12 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.683m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 3pcs - 16mmØ BB = 3pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 44.02kNm SAFE 0.00
250 -Mu: -44.02kNm SAFE 0.96

200
Midspan
+Mu: 69.84kNm SAFE 0.42
150
-Mu: -48.11kNm SAFE 0.50
100 Right Support
50
+Mu: 69.84kNm SAFE 0.62
-Mu: -48.11kNm SAFE 0.25
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
50 200

40

30 150

20

10 100

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-10 50

-20

-30 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-40

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -22.81kNm 1.40kNm 16.86kNm Vu = 35.2 kN 33.7 kN 32.7 kN
+Mu = 0.00kNm 29.19kNm 43.54kNm Tu = 10.1 kNm 9.9 kNm 9.1 kNm
-Mu = -42.23kNm -23.82kNm -11.84kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
1.00 Dia = 10 mm Left Right
0.80 Midspan
0.60 fyt = 275 Mpa Support Support
0.40
0.20 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
0.00
-0.20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1@50, 4@100, Tu(D) = 2.1kNm 1.9kNm 1.1kNm
-0.40
-0.60
4@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-0.80 @300 ALfy(min): -15.9kN 0.0kN 0.0kN
-1.00
-1.20 ALfy(req): 31.1kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.26 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/5087 L/22820 L/2914 Tu(D)/φTn: 0.63 SAFE %(MB) : 9.31% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 1.0MPa
∴ OK ∴ OK τRact = 0.7MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 162.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B13 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.25m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 3pcs - 16mmØ BB = 3pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 69.84kNm SAFE 0.72
250 -Mu: -48.11kNm SAFE 0.09

200
Midspan
+Mu: 69.84kNm SAFE 0.58
150
-Mu: -48.11kNm SAFE 0.05
100 Right Support
50
+Mu: 48.11kNm SAFE 0.24
-Mu: -48.11kNm SAFE 0.26
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
60 200

50
150
40

30
100

20

50
10

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0
-10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-20 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 24.51kNm 15.57kNm -5.01kNm Vu = 20.7 kN 20.7 kN 21.7 kN
+Mu = 49.98kNm 40.59kNm 11.39kNm Tu = 2.7 kNm 1.8 kNm 2.1 kNm
-Mu = -4.45kNm -2.51kNm -12.67kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
-1.00 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00 fyt = 275 Mpa Support Support
-3.00
-4.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-5.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-6.00
-7.00 5@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-8.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-9.00
-10.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.15 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/813 L/3902 L/381 Tu(D)/φTn: 0.16 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 5mm Camber Required ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.3MPa
∴ OK ∴ OK τRact = 0.3MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 50 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 50 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B14 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.705m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.06
250 -Mu: -48.11kNm SAFE 0.05

200
Midspan
+Mu: 48.11kNm SAFE 0.06
150
-Mu: -48.11kNm SAFE 0.21
100 Right Support
50
+Mu: 48.11kNm SAFE 0.03
-Mu: -48.11kNm SAFE 0.30
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
4 200

0 150
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-2

-4 100

-6

-8 50

-10

-12 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-14

-16 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 0.49kNm -1.66kNm -7.41kNm Vu = 8.8 kN 11.0 kN 13.8 kN
+Mu = 3.06kNm 2.66kNm 1.32kNm Tu = 1.3 kNm 2.7 kNm 3.1 kNm
-Mu = -2.57kNm -10.12kNm -14.32kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.16 Dia = 10 mm Left Right
0.14 Midspan
0.12
fyt = 275 Mpa Support Support
0.10 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
0.08
0.06
1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
0.04 5@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
0.02 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
0.00
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.08 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/35816 L/138353 L/12028 Tu(D)/φTn: 0.19 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.1MPa
∴ OK ∴ OK τRact = 0.2MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 50 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 50 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B15 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.909m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 4pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 51.60kNm SAFE 0.45
250 -Mu: -84.93kNm SAFE 0.86

200
Midspan
+Mu: 48.11kNm SAFE 0.77
150
-Mu: -48.11kNm SAFE 0.50
100 Right Support
50
+Mu: 48.11kNm SAFE 0.56
-Mu: -69.84kNm SAFE 0.83
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
40 200

20
150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100

-20

50
-40

0
-60
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-80 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -28.39kNm 19.26kNm -18.49kNm Vu = 75.7 kN 28.7 kN 67.9 kN
+Mu = 22.97kNm 37.26kNm 26.78kNm Tu = 6.4 kNm 6.4 kNm 5.0 kNm
-Mu = -73.01kNm -23.97kNm -58.01kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00
fyt = 275 Mpa Support Support
-4.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-6.00

-8.00
1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-10.00
9@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-12.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-14.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.45 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/629 L/2248 L/322 Tu(D)/φTn: 0.36 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 5mm Camber Required ρmin = 0.3% Vsmin = 22.6kN τRmax = 2.7MPa
ρact = 0.6%-1.2% Vsact = 31.6kN τLact = 1.0MPa
∴ OK ∴ OK τRact = 0.9MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 161.8 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B16 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.667162 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.4m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 250 mm bf = 250 mm bf = 250 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 6pcs - 16mmØ TB = 6pcs - 16mmØ TB = 6pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 53.98kNm SAFE 0.51
250 -Mu: -126.53kNm SAFE 0.04

200
Midspan
+Mu: 51.50kNm SAFE 0.16
150
-Mu: -120.16kNm SAFE 0.66
100 Right Support
50
+Mu: 50.90kNm SAFE 0.00
-Mu: -118.61kNm SAFE 0.93
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
40 350

20 300

250
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 200
-20
150
-40
100
-60
50
-80
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-100 50

-120 100

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 17.74kNm -21.78kNm -70.41kNm Vu = 0.0 kN 97.8 kN 110.8 kN
+Mu = 27.35kNm 8.20kNm 0.00kNm Tu = 13.5 kNm 14.8 kNm 15.5 kNm
-Mu = -5.09kNm -79.50kNm -110.37kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 12 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00 fyt = 275 Mpa Support Support
-4.00 Spacing: φTcr = 11.5kNm 11.5kNm 11.5kNm
-6.00 1@50, 4@75, Tu(D) = 2.0kNm 3.2kNm 4.0kNm
-8.00 1@150, Rest φTth = 2.9kNm 2.9kNm 2.9kNm
-10.00 @300 ALfy(min): 0.0kN -74.4kN -162.9kN
-12.00 ALfy(req): 0.0kN 37.3kN 46.3kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.47 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/284 L/718 L/157 Tu(D)/φTn: 0.54 SAFE %(MB) : 0.00% 5.59% 6.94%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 249.0kN τLmax = 2.8MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 28.7kN τRmax = 2.7MPa
ρact = 0.5%-1.5% Vsact = 58.1kN τLact = 1.3MPa
∴ OK ∴ OK τRact = 1.6MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 164.2 mm 164.2 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 174.5 mm 174.5 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B17 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.667162 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.346m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 250 mm bf = 250 mm bf = 250 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 6pcs - 16mmØ TB = 3pcs - 16mmØ TB = 4pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 54.16kNm SAFE 0.00
250 -Mu: -127.73kNm SAFE 0.88

200
Midspan
+Mu: 49.19kNm SAFE 0.54
150
-Mu: -71.06kNm SAFE 0.90
100 Right Support
50
+Mu: 49.21kNm SAFE 0.79
-Mu: -92.63kNm SAFE 0.30
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
60 200

40

20 150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-20

-40
50
-60

-80 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-100

-120 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -62.55kNm -3.55kNm 5.11kNm Vu = 78.0 kN 42.8 kN 42.8 kN
+Mu = 0.16kNm 26.52kNm 38.74kNm Tu = 7.7 kNm 6.5 kNm 6.7 kNm
-Mu = -112.00kNm -63.73kNm -27.73kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
2.50 Dia = 10 mm Left Right
Midspan
2.00 fyt = 275 Mpa Support Support
1.50 Spacing: φTcr = 11.5kNm 11.5kNm 11.5kNm
1.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
0.50 7@150, Rest φTth = 2.9kNm 2.9kNm 2.9kNm
0.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.42 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/4379 L/31604 L/1661 Tu(D)/φTn: 0.28 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 260.9kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 28.9kN τRmax = 2.7MPa
ρact = 0.5%-1.5% Vsact = 28.9kN τLact = 0.8MPa
∴ OK ∴ OK τRact = 0.5MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 165.2 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B18 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.667162 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 4.99m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 250 mm bf = 250 mm bf = 250 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 4pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 49.21kNm SAFE 0.55
250 -Mu: -92.63kNm SAFE 0.90

200
Midspan
+Mu: 49.15kNm SAFE 0.85
150
-Mu: -49.15kNm SAFE 0.36
100 Right Support
50
+Mu: 49.19kNm SAFE 0.74
-Mu: -71.06kNm SAFE 0.86
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
60 200

40
150
20

0
100
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-20

50
-40

-60
0
-80 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-100 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -42.85kNm 29.11kNm -25.40kNm Vu = 85.6 kN 11.2 kN 72.1 kN
+Mu = 27.06kNm 41.94kNm 36.56kNm Tu = 10.5 kNm 6.1 kNm 5.5 kNm
-Mu = -83.53kNm -17.64kNm -60.91kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
-5.00
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
fyt = 275 Mpa Support Support
-10.00
-15.00 Spacing: φTcr = 11.5kNm 11.5kNm 11.5kNm
-20.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-25.00
7@150, Rest φTth = 2.9kNm 2.9kNm 2.9kNm
-30.00
-35.00
@300 ALfy(min): 0.0kN 0.0kN 0.0kN
-40.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.46 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/310 L/1065 L/149 Tu(D)/φTn: 0.42 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 260.9kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 10mm Camber Required ρmin = 0.3% Vsmin = 30.1kN τRmax = 2.7MPa
ρact = 0.5%-0.9% Vsact = 30.1kN τLact = 0.9MPa
∴ OK ∴ OK τRact = 0.8MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: 2B19 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.5m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 3pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.33
250 -Mu: -48.11kNm SAFE 0.10

200
Midspan
+Mu: 69.84kNm SAFE 0.07
150
-Mu: -48.11kNm SAFE 0.79
100 Right Support
50
+Mu: 48.11kNm SAFE 0.00
-Mu: -69.84kNm SAFE 0.76
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
20 250

10
200
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 150
-10

-20 100

-30
50
-40
0
-50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-60 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 5.33kNm -9.33kNm -27.31kNm Vu = 0.0 kN 44.1 kN 51.0 kN
+Mu = 15.88kNm 4.75kNm 0.00kNm Tu = 7.7 kNm 6.9 kNm 6.1 kNm
-Mu = -4.97kNm -38.23kNm -53.36kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-0.50
fyt = 275 Mpa Support Support
-1.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.50

-2.00
1@50, 4@75, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-2.50
7@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-3.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-3.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.26 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/1337 L/15503 L/488 Tu(D)/φTn: 0.42 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.6MPa
∴ OK ∴ OK τRact = 0.7MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD1 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 5.126m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 37.5 mm cc = 37.5 mm cc = 37.5 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.18kNm SAFE 0.28
250 -Mu: -48.18kNm SAFE 0.99

200
Midspan
+Mu: 48.18kNm SAFE 0.42
150
-Mu: -48.18kNm SAFE 0.24
100 Right Support
50
+Mu: 48.18kNm SAFE 0.36
-Mu: -48.18kNm SAFE 0.68
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
30 200

20

10 150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-10

-20
50
-30

-40 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-50

-60 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -27.77kNm 14.85kNm -15.33kNm Vu = 42.6 kN 9.9 kN 37.1 kN
+Mu = 13.40kNm 20.42kNm 17.33kNm Tu = 5.1 kNm 5.9 kNm 5.3 kNm
-Mu = -47.90kNm -11.59kNm -32.65kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00 fyt = 275 Mpa Support Support
-4.00 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-6.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-8.00 11@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-10.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-12.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.25 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/650 L/2108 L/455 Tu(D)/φTn: 0.33 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 209.0kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 5mm Camber Required ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.6MPa
∴ OK ∴ OK τRact = 0.5MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.3 mm 172.3 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 315.0 mm 315.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD1a Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.128m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.23
250 -Mu: -48.11kNm SAFE 0.71

200
Midspan
+Mu: 48.11kNm SAFE 0.26
150
-Mu: -48.11kNm SAFE 0.30
100 Right Support
50
+Mu: 48.11kNm SAFE 0.32
-Mu: -48.11kNm SAFE 0.43
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
20 200

10
150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100

-10

50
-20

0
-30
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-40 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -12.49kNm 4.64kNm -3.28kNm Vu = 34.7 kN 16.3 kN 22.9 kN
+Mu = 11.22kNm 12.48kNm 15.61kNm Tu = 3.9 kNm 3.6 kNm 6.1 kNm
-Mu = -34.04kNm -14.19kNm -20.55kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.10 Dia = 10 mm Left Right
Midspan
0.00
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
fyt = 275 Mpa Support Support
-0.10
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.20

-0.30
1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-0.40
4@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-0.50 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-0.60 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.20 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/19304 L/68757 L/6474 Tu(D)/φTn: 0.36 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.4MPa
∴ OK ∴ OK τRact = 0.3MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 100 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 100 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD2 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.3m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.11
250 -Mu: -48.11kNm SAFE 0.09

200
Midspan
+Mu: 48.11kNm SAFE 0.02
150
-Mu: -48.11kNm SAFE 0.62
100 Right Support
50
+Mu: 48.11kNm SAFE 0.00
-Mu: -69.84kNm SAFE 0.60
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
10 250

0 200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-10 150

-20 100

-30 50

-40 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 3.66kNm -8.85kNm -26.21kNm Vu = 0.0 kN 36.5 kN 46.1 kN
+Mu = 5.25kNm 1.06kNm 0.00kNm Tu = 4.3 kNm 4.7 kNm 5.1 kNm
-Mu = -4.24kNm -30.02kNm -41.85kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-0.50 fyt = 275 Mpa Support Support
-1.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
1@50, 4@75, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-1.50
6@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-2.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-2.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.22 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/1602 L/15592 L/595 Tu(D)/φTn: 0.28 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.5MPa
∴ OK ∴ OK τRact = 0.5MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD3 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.826m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 3pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.10
250 -Mu: -69.84kNm SAFE 0.75

200
Midspan
+Mu: 48.11kNm SAFE 0.34
150
-Mu: -48.11kNm SAFE 0.36
100 Right Support
50
+Mu: 48.11kNm SAFE 0.29
-Mu: -48.11kNm SAFE 0.09
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
30 200

20

10 150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-10

-20
50
-30

-40 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-50

-60 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -31.49kNm 11.13kNm -0.06kNm Vu = 53.1 kN 3.8 kN 16.2 kN
+Mu = 5.00kNm 16.44kNm 13.95kNm Tu = 7.6 kNm 5.4 kNm 2.4 kNm
-Mu = -52.12kNm -17.21kNm -4.17kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.50 Dia = 10 mm Left Right
Midspan
0.00 fyt = 275 Mpa Support Support
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.50 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-1.50 5@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-2.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-2.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.29 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/6548 L/13703 L/1944 Tu(D)/φTn: 0.44 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.7MPa
∴ OK ∴ OK τRact = 0.1MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD4 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.926m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 4pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.12
250 -Mu: -48.11kNm SAFE 0.64

200
Midspan
+Mu: 48.11kNm SAFE 0.42
150
-Mu: -48.11kNm SAFE 0.23
100 Right Support
50
+Mu: 46.77kNm SAFE 0.19
-Mu: -76.14kNm SAFE 0.68
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
30 250

20
200
10

0 150
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-10
100
-20

-30 50

-40
0
-50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-60 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -18.67kNm 9.51kNm -35.20kNm Vu = 26.2 kN 8.3 kN 71.7 kN
+Mu = 5.75kNm 20.06kNm 8.67kNm Tu = 4.8 kNm 9.0 kNm 14.0 kNm
-Mu = -30.74kNm -10.95kNm -52.10kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.20 Dia = 10 mm Left Right
0.00 Midspan
-0.20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 fyt = 275 Mpa Support Support
-0.40
-0.60
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-0.80 1@50, 4@75, Tu(D) = 0.0kNm 1.0kNm 6.0kNm
-1.00
-1.20 4@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-1.40 @300 ALfy(min): 0.0kN 0.0kN -24.6kN
-1.60
-1.80 ALfy(req): 0.0kN 0.0kN 56.1kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.34 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/11300 L/10996 L/2596 Tu(D)/φTn: 0.76 SAFE %(MB) : 0.00% 0.00% 11.20%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 22.6kN τRmax = 2.7MPa
ρact = 0.6%-1.2% Vsact = 22.6kN τLact = 0.4MPa
∴ OK ∴ OK τRact = 2.6MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 161.8 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 162.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD5 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 5.7838m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 4pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 47.53kNm SAFE 0.35
250 -Mu: -77.53kNm SAFE 0.82

200
Midspan
+Mu: 48.11kNm SAFE 0.78
150
-Mu: -48.11kNm SAFE 0.12
100 Right Support
50
+Mu: 48.11kNm SAFE 0.27
-Mu: -48.11kNm SAFE 0.81
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
40 200

20
150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100

-20

50
-40

0
-60
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-80 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -43.46kNm 17.59kNm -26.64kNm Vu = 78.8 kN 17.9 kN 44.2 kN
+Mu = 16.53kNm 37.52kNm 13.19kNm Tu = 13.2 kNm 7.2 kNm 6.5 kNm
-Mu = -63.34kNm -5.60kNm -38.78kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-5.00
fyt = 275 Mpa Support Support
-10.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-15.00

-20.00
1@50, 4@100, Tu(D) = 5.2kNm 0.0kNm 0.0kNm
-25.00
9@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-30.00 @300 ALfy(min): 5.6kN 0.0kN 0.0kN
-35.00 ALfy(req): 47.2kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.46 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/337 L/1979 L/176 Tu(D)/φTn: 0.73 SAFE %(MB) : 9.43% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 10mm Camber Required ρmin = 0.3% Vsmin = 22.6kN τRmax = 2.7MPa
ρact = 0.6%-1.2% Vsact = 22.6kN τLact = 2.4MPa
∴ OK ∴ OK τRact = 0.6MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 161.8 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 162.0 mm 364.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD6 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.667162 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.4m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 250 mm bf = 250 mm bf = 250 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 6-16Ø + 1-10Ø TB = 6-16Ø + 1-10Ø TB = 6-16Ø + 1-10Ø φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 52.10kNm SAFE 0.48
250 -Mu: -126.63kNm SAFE 0.04

200
Midspan
+Mu: 51.59kNm SAFE 0.08
150
-Mu: -125.33kNm SAFE 0.69
100 Right Support
50
+Mu: 51.24kNm SAFE 0.00
-Mu: -124.42kNm SAFE 0.97
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
40 350

20 300

0 250
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-20 200

-40 150

-60 100

-80 50

-100 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-120 50

-140 100

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 15.64kNm -25.42kNm -77.22kNm Vu = 0.0 kN 106.9 kN 120.8 kN
+Mu = 25.05kNm 3.99kNm 0.00kNm Tu = 14.8 kNm 15.4 kNm 15.9 kNm
-Mu = -4.67kNm -87.10kNm -120.79kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 12 mm Left Right
-0.50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-1.00 fyt = 275 Mpa Support Support
-1.50
-2.00
Spacing: φTcr = 11.5kNm 11.5kNm 11.5kNm
-2.50 1@50, 4@75, Tu(D) = 3.2kNm 3.9kNm 4.3kNm
-3.00
-3.50 4@150, Rest φTth = 2.9kNm 2.9kNm 2.9kNm
-4.00 Ø10@300 ALfy(min): -162.9kN -118.7kN -162.9kN
-4.50
-5.00 ALfy(req): 37.2kN 44.9kN 50.3kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.44 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/695 L/5847 L/325 Tu(D)/φTn: 0.51 SAFE %(MB) : 5.32% 6.42% 7.18%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 247.7kN τLmax = 2.8MPa
(δLONGTERM/L)max = L/480 5mm Camber Required ρmin = 0.3% Vsmin = 28.6kN τRmax = 2.7MPa
ρact = 0.5%-1.6% Vsact = 69.7kN τLact = 1.5MPa
∴ OK ∴ OK τRact = 1.8MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 163.3 mm 163.3 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 174.5 mm 174.5 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD1b Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.1264m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 47.84kNm SAFE 0.00
250 -Mu: -47.84kNm SAFE 0.65

200
Midspan
+Mu: 47.84kNm SAFE 0.00
150
-Mu: -47.84kNm SAFE 0.65
100 Right Support
50
+Mu: 47.84kNm SAFE 0.00
-Mu: -47.84kNm SAFE 0.57
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
5 250

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 200
-5
150
-10

-15 100

-20
50
-25
0
-30 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-35 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -19.21kNm -19.00kNm -12.01kNm Vu = 3.8 kN 5.6 kN 14.6 kN
+Mu = 0.00kNm 0.00kNm 0.00kNm Tu = 3.6 kNm 2.4 kNm 4.1 kNm
-Mu = -31.31kNm -31.31kNm -27.11kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
2.00 Dia = 12 mm Left Right
1.80 Midspan
1.60 fyt = 275 Mpa Support Support
1.40
1.20 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
1.00
0.80
1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
0.60
0.40
Rest @300 φTth = 2.0kNm 2.0kNm 2.0kNm
0.20
0.00
ALfy(min): 0.0kN 0.0kN 0.0kN
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.07 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/3032 L/36696 L/1148 Tu(D)/φTn: 0.20 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 207.5kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 23.9kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 23.9kN τLact = 0.1MPa
∴ OK ∴ OK τRact = 0.2MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 171.0 mm 171.0 mm
Provided: 50 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 312.0 mm 312.0 mm
Provided: 50 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD7 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 0.7159m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 41.15kNm SAFE 0.09
250 -Mu: -41.15kNm SAFE 0.33

200
Midspan
+Mu: 41.15kNm SAFE 0.13
150
-Mu: -41.15kNm SAFE 0.27
100 Right Support
50
+Mu: 41.45kNm SAFE 0.14
-Mu: -41.45kNm SAFE 0.12
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
10 250

200
5

150
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
100

-5
50

-10
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-15 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -6.77kNm -2.27kNm 1.07kNm Vu = 23.7 kN 22.6 kN 22.6 kN
+Mu = 3.51kNm 5.27kNm 5.72kNm Tu = 11.4 kNm 11.4 kNm 10.6 kNm
-Mu = -13.45kNm -11.06kNm -5.15kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.04 Dia = 12 mm Left Right
0.04 Midspan
0.03 fyt = 275 Mpa Support Support
0.03
0.02
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
0.02 1@50, 4@100, Tu(D) = 3.4kNm 3.4kNm 2.6kNm
0.01
0.01 Rest @300 φTth = 2.0kNm 2.0kNm 2.0kNm
0.00
-0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 ALfy(min): -91.6kN -158.5kN -91.6kN
-0.01 ALfy(req): 51.4kN 51.4kN 49.2kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.10 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/41623 L/127298 L/21335 Tu(D)/φTn: 0.56 SAFE %(MB) : 15.41% 15.41% 14.73%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 207.5kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 23.9kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 23.9kN τLact = 1.5MPa
∴ OK ∴ OK τRact = 1.2MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 171.0 mm 171.0 mm
Provided: 100 mm OK 100 mm OK

FOR TORSION LEFT RIGHT

Required: 112.0 mm 112.0 mm
Provided: 100 mm OK 100 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD8 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 3.7292m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 4pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 4pcs - 16mmØ BB = 4pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 85.51kNm SAFE 0.60
250 -Mu: -85.51kNm SAFE 0.87

200
Midspan
+Mu: 84.93kNm SAFE 0.97
150
-Mu: -51.60kNm SAFE 0.13
100 Right Support
50
+Mu: 48.11kNm SAFE 0.37
-Mu: -48.11kNm SAFE 0.47
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
80 250

60
200
40

20 150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-20

-40 50

-60
0
-80 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-100 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -38.11kNm 12.53kNm -3.02kNm Vu = 133.5 kN 0.2 kN 36.5 kN
+Mu = 51.61kNm 82.03kNm 17.91kNm Tu = 6.8 kNm 4.1 kNm 3.8 kNm
-Mu = -74.05kNm -6.92kNm -22.53kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-2.00
fyt = 275 Mpa Support Support
-4.00
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-6.00

-8.00
1@50, 18@75, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-10.00
Rest @300 φTth = 2.0kNm 2.0kNm 2.0kNm
-12.00 ALfy(min): 0.0kN 0.0kN 0.0kN
-14.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.64 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/662 L/6556 L/309 Tu(D)/φTn: 0.27 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.8MPa
(δLONGTERM/L)max = L/480 5mm Camber Required ρmin = 0.3% Vsmin = 22.6kN τRmax = 2.7MPa
ρact = 0.6%-1.2% Vsact = 56.3kN τLact = 2.0MPa
∴ OK ∴ OK τRact = 0.5MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 80.9 mm 172.0 mm
Provided: 75 mm OK 75 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 75 mm OK 75 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD9 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.604m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 3pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 39.96kNm SAFE 0.62
250 -Mu: -39.96kNm SAFE 0.91

200
Midspan
+Mu: 69.84kNm SAFE 0.75
150
-Mu: -48.11kNm SAFE 0.12
100 Right Support
50
+Mu: 48.11kNm SAFE 0.45
-Mu: -48.11kNm SAFE 0.08
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
50 200

40

30 150

20

10 100

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-10 50

-20

-30 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-40

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -22.90kNm 13.70kNm 2.80kNm Vu = 95.0 kN 18.0 kN 21.4 kN
+Mu = 24.88kNm 52.05kNm 21.77kNm Tu = 12.2 kNm 2.1 kNm 3.1 kNm
-Mu = -36.46kNm -6.00kNm -3.94kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.50 Dia = 10 mm Left Right
Midspan
0.00 fyt = 275 Mpa Support Support
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.50 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.00 1@50, 4@100, Tu(D) = 4.2kNm 0.0kNm 0.0kNm
-1.50 2@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-2.00 @300 ALfy(min): -15.9kN 0.0kN 0.0kN
-2.50 ALfy(req): 61.9kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.57 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/3298 L/449052 L/1279 Tu(D)/φTn: 0.62 SAFE %(MB) : 18.54% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 34.9kN τLact = 2.2MPa
∴ OK ∴ OK τRact = 0.3MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 162.0 mm 314.0 mm
Provided: 150 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD10 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.4m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 3pcs - 16mmØ TB = 3pcs - 16mmØ TB = 3pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.04
250 -Mu: -69.84kNm SAFE 0.08

200
Midspan
+Mu: 42.91kNm SAFE 0.01
150
-Mu: -62.13kNm SAFE 0.40
100 Right Support
50
+Mu: 39.43kNm SAFE 0.00
-Mu: -56.97kNm SAFE 0.58
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
5 200

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 150
-5

-10
100

-15

50
-20

-25
0
-30 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-35 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = 0.97kNm -7.69kNm -20.20kNm Vu = 0.0 kN 25.0 kN 29.8 kN
+Mu = 1.84kNm 0.46kNm 0.00kNm Tu = 9.6 kNm 11.4 kNm 13.6 kNm
-Mu = -5.56kNm -24.62kNm -32.83kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
-0.20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-0.40 fyt = 275 Mpa Support Support
-0.60
-0.80
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.00 1@50, 4@100, Tu(D) = 1.6kNm 3.4kNm 5.6kNm
-1.20
-1.40 Rest @300 φTth = 2.0kNm 2.0kNm 2.0kNm
-1.60
-1.80
ALfy(min): 0.0kN 14.6kN -15.9kN
-2.00 ALfy(req): 0.0kN 49.6kN 82.7kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.18 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/2082 L/10577 L/763 Tu(D)/φTn: 0.81 SAFE %(MB) : 0.00% 11.90% 19.81%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.8MPa
∴ OK ∴ OK τRact = 2.3MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 100 mm OK 100 mm OK

FOR TORSION LEFT RIGHT

Required: 112.0 mm 112.0 mm
Provided: 100 mm OK 100 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD11 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.541m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 3pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 3pcs - 16mmØ BB = 3pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.04
250 -Mu: -69.84kNm SAFE 0.81

200
Midspan
+Mu: 69.84kNm SAFE 0.80
150
-Mu: -48.11kNm SAFE 0.52
100 Right Support
50
+Mu: 69.84kNm SAFE 0.77
-Mu: -48.11kNm SAFE 0.66
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
60 250

40
200

20
150

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 100
-20
50
-40

-60 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-80 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -30.38kNm 12.12kNm -18.39kNm Vu = 61.8 kN 58.2 kN 96.1 kN
+Mu = 2.10kNm 55.81kNm 53.73kNm Tu = 1.9 kNm 1.9 kNm 2.2 kNm
-Mu = -56.51kNm -25.24kNm -31.54kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.50 Dia = 10 mm Left Right
0.00 Midspan
-0.50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 fyt = 275 Mpa Support Support
-1.00 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.50
-2.00
1@50, 4@75, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-2.50 5@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-3.00
-3.50
@300 ALfy(min): 0.0kN 0.0kN 0.0kN
-4.00 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.50 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/1325 L/25136 L/714 Tu(D)/φTn: 0.11 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 46.0kN τLact = 0.9MPa
∴ OK ∴ OK τRact = 1.3MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 150 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 150 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RB1 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 5.126m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 48.11kNm SAFE 0.05
250 -Mu: -48.11kNm SAFE 0.44

200
Midspan
+Mu: 48.11kNm SAFE 0.33
150
-Mu: -48.11kNm SAFE 0.14
100 Right Support
50
+Mu: 48.11kNm SAFE 0.15
-Mu: -48.11kNm SAFE 0.17
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
20 200

15

10 150

5
100
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-5
50
-10

-15 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-20

-25 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -12.03kNm 7.25kNm -2.28kNm Vu = 16.6 kN 10.8 kN 12.2 kN
+Mu = 2.63kNm 16.07kNm 7.37kNm Tu = 2.7 kNm 3.1 kNm 3.1 kNm
-Mu = -21.32kNm -6.93kNm -8.24kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.50 Dia = 10 mm Left Right
Midspan
0.00 fyt = 275 Mpa Support Support
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-0.50 Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
-1.00 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-1.50 5@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-2.00 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-2.50 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.10 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/5913 L/111451 L/2399 Tu(D)/φTn: 0.21 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.6% Vsact = 24.1kN τLact = 0.2MPa
∴ OK ∴ OK τRact = 0.2MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 50 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 50 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RD12 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.702579 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 2.695m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 400 mm h = 400 mm h = 400 mm φft = 0.900
cc = 38 mm cc = 38 mm cc = 38 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 3pcs - 16mmØ BB = 3pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
400

350
BEAM FLEXURE CAPACITY
Left Support
300
+Mu: 69.84kNm SAFE 0.04
250 -Mu: -48.11kNm SAFE 0.95

200
Midspan
+Mu: 69.84kNm SAFE 0.12
150
-Mu: -48.11kNm SAFE 0.46
100 Right Support
50
+Mu: 48.11kNm SAFE 0.16
-Mu: -48.11kNm SAFE 0.02
0
0 200 400 600 800 1000 1200

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
20 200

10
150
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
100
-10

-20
50

-30
0
-40 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

-50 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -26.68kNm 5.17kNm 3.71kNm Vu = 42.4 kN 14.1 kN 14.1 kN
+Mu = 2.92kNm 8.14kNm 7.92kNm Tu = 2.7 kNm 2.7 kNm 2.5 kNm
-Mu = -45.76kNm -22.21kNm -1.17kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.40 Dia = 10 mm Left Right
Midspan
0.30
fyt = 275 Mpa Support Support
0.20
Spacing: φTcr = 8.0kNm 8.0kNm 8.0kNm
0.10

0.00
1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-0.10
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 3@150, Rest φTth = 2.0kNm 2.0kNm 2.0kNm
-0.20 @300 ALfy(min): 0.0kN 0.0kN 0.0kN
-0.30 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.22 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/18505 L/20652 L/9814 Tu(D)/φTn: 0.16 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 208.7kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 24.1kN τRmax = 2.7MPa
ρact = 0.6%-0.9% Vsact = 24.1kN τLact = 0.4MPa
∴ OK ∴ OK τRact = 0.2MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 172.0 mm 172.0 mm
Provided: 150 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 314.0 mm 314.0 mm
Provided: 150 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING WITH ROOFDECK
Location: MRS. JO-ANN DELA CRUZ
Client: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job No.: 1 Design by: SAC Checked by:
Subject: RB2 Date: Sep-22-22 Revision:
ANALYSIS & DESIGN OF RC BEAM
INPUT DATA
MATERIAL PROPERTIES
CONCRETE STEEL REINFORCEMENT P-TENSION PROPERTIES STEEL REBAR STRESS-STRAIN
'
fc = 20.7 Mpa fy = 415 Mpa Qty = 0 500

400
Ec = 21654.11 Mpa Es = 200,000 Mpa Øpt = 0 mm 300
εc = 0.003 fu = 518.75 Mpa Sys = 0 200

λ = 1 fyt = 275 Mpa fypt = 0 Mpa 100

0
ξ = 2.685293 fyw = N/A Mpa Ept = 0 MPa 0 0.001 0.002 0.003 0.004 0.005

Loss = 0 %
BEAM CROSS SECTION w/ Total Length = 1.2853m REDUCTION FACTORS
LEFT SUPPORT MIDSPAN RIGHT SUPPORT FLEXURE
bf = 200 mm bf = 200 mm bf = 200 mm β = 0.850
h = 500 mm h = 500 mm h = 500 mm φft = 0.900
cc = 20 mm cc = 20 mm cc = 20 mm φfc = 0.650
t = 0 mm t = 0 mm t(eff) = 0 mm SHEAR
TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ TB = 2pcs - 16mmØ φv = 0.750
WB = NONE WB = NONE WB = NONE TORSION
BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ BB = 2pcs - 16mmØ φt = 0.750
500

450 BEAM FLEXURE CAPACITY

400 Left Support
350 +Mu: 65.97kNm SAFE 0.00

300
-Mu: -65.97kNm SAFE 0.59

250
Midspan
200
+Mu: 65.97kNm SAFE 0.00

150
-Mu: -65.97kNm SAFE 0.50

100
Right Support
+Mu: 65.97kNm SAFE 0.00
50
-Mu: -65.97kNm SAFE 0.27
0
0 200 400 600 800 1000 1200 1400 1600

DESIGN LOADINGS (LOAD COMBINATION ENVELOPE) SHEAR & TORSION DESIGN

FACTORED ±MOMENTS (FROM LEFT TO RIGHT) [TOP]SHEAR AND [BOTTOM]TORSION (FROM LEFT TO RIGHT)
5 200

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-5 150

-10

-15 100

-20

-25 50

-30

-35 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
-40

-45 50

LEFT SUPPORT MIDSPAN RIGHT SUPPORT LEFT SUPPORT MIDSPAN RIGHT SUPPORT
Ma = -26.34kNm -16.39kNm -7.77kNm Vu = 0.0 kN 21.7 kN 21.7 kN
+Mu = 0.00kNm 0.00kNm 0.00kNm Tu = 6.5 kNm 6.4 kNm 6.1 kNm
-Mu = -38.93kNm -32.80kNm -17.52kNm φVc φVn φTcr φTn

BEAM DEFLECTIONS STIRRUPS SCHEDULE LONGITUDINAL REINFORCEMENT

ACI (CONSTANT EI) Set = 1 (2Legs) DESIGN FOR TORSION
0.00 Dia = 10 mm Left Right
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Midspan
-0.20 fyt = 275 Mpa Support Support
-0.40 Spacing: φTcr = 10.7kNm 10.7kNm 10.7kNm
-0.60 1@50, 4@100, Tu(D) = 0.0kNm 0.0kNm 0.0kNm
-0.80 Rest @300 φTth = 2.7kNm 2.7kNm 2.7kNm
-1.00 ALfy(min): 0.0kN 0.0kN 0.0kN
-1.20 ALfy(req): 0.0kN 0.0kN 0.0kN
DEADLOAD LIVELOAD LONG-TERM Vu/φVn: 0.12 SAFE ALfy(web): 0.0kN 0.0kN 0.0kN
δ/L :
L/3523 L/29690 L/1208 Tu(D)/φTn: 0.29 SAFE %(MB) : 0.00% 0.00% 0.00%

DEFLECTIONS LIMIT CHECK SECTION LIMITATIONS

(δDEADLOAD/L)max = L/240 OK FLEXURE SHEAR TORSION
(δLIVELOAD/L)max = L/360 OK ρmax = 1.6% Vsmax = 280.3kN τLmax = 2.7MPa
(δLONGTERM/L)max = L/480 OK ρmin = 0.3% Vsmin = 32.3kN τRmax = 2.7MPa
ρact = 0.4%-0.4% Vsact = 32.3kN τLact = 0.2MPa
∴ OK ∴ OK τRact = 0.2MPa
OK ∴
STIRRUPS MAX SPACING @ RANGE φVc/2 TO φVc
FOR SHEAR LEFT RIGHT
Required: 231.0 mm 231.0 mm
Provided: 50 mm OK 50 mm OK

FOR TORSION LEFT RIGHT

Required: 450.0 mm 450.0 mm
Provided: 50 mm OK 50 mm OK
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C1@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C1
LOCATION
GRID LINE = GL F-1 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.6588 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 6-16mmØ
EDGE REBARS -1 = 4-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 264.92 46.49 59.39 0.783 Capacity OK
2 COMBI2 234.51 67.58 74.14 0.912 Capacity OK
3 COMBI3 234.51 67.58 74.14 0.912 Capacity OK
4 COMBI4 264.92 46.49 59.39 0.783 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=42.9° Ultimate ϴ=42.9° Ultimate ϴ=86.5° Ultimate ϴ=86.5°
Nominal ϴ=42.9° Nominal ϴ=42.9° Nominal ϴ=86.5° Nominal ϴ=86.5°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C1@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C1
LOCATION
GRID LINE = GL F-1 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.6588 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 6-16mmØ
EDGE REBARS -1 = 4-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 145.49 46.49 59.69 0.779 Capacity OK
2 COMBI2 104.89 67.58 74.42 0.908 Capacity OK
3 COMBI3 145.49 67.58 74.36 0.909 Capacity OK
4 COMBI4 104.89 46.49 59.33 0.784 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=42.9° Ultimate ϴ=42.9° Ultimate ϴ=86.5° Ultimate ϴ=86.5°
Nominal ϴ=42.9° Nominal ϴ=42.9° Nominal ϴ=86.5° Nominal ϴ=86.5°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C1@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C1
LOCATION
GRID LINE = GL F-1 RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.5080 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 73.73 22.95 58.06 0.395 Capacity OK
2 COMBI2 73.32 29.65 74.22 0.399 Capacity OK
3 COMBI3 73.32 29.65 74.22 0.399 Capacity OK
4 COMBI4 66.39 22.90 32.24 0.710 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=18.7° Ultimate ϴ=18.7° Ultimate ϴ=68.2° Ultimate ϴ=36.4°
Nominal ϴ=18.7° Nominal ϴ=18.7° Nominal ϴ=68.2° Nominal ϴ=36.4°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C19@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C2
LOCATION
GRID LINE = GL F-4 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 336.00 55.81 79.71 0.700 Capacity OK
2 COMBI2 297.40 59.83 78.25 0.765 Capacity OK
3 COMBI3 297.40 59.83 78.25 0.765 Capacity OK
4 COMBI4 306.87 46.54 69.80 0.667 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=7.6° Ultimate ϴ=7.6° Ultimate ϴ=20.8° Ultimate ϴ=0.4°
Nominal ϴ=7.6° Nominal ϴ=7.6° Nominal ϴ=20.8° Nominal ϴ=0.4°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C2@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C3
LOCATION
GRID LINE = GL F-5 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2064 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 273.18 47.93 53.54 0.895 Capacity OK
2 COMBI2 228.72 67.84 93.10 0.729 Capacity OK
3 COMBI3 228.72 67.84 93.10 0.729 Capacity OK
4 COMBI4 273.18 47.93 53.54 0.895 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=8° Ultimate ϴ=8° Ultimate ϴ=87.8° Ultimate ϴ=87.8°
Nominal ϴ=8° Nominal ϴ=8° Nominal ϴ=87.8° Nominal ϴ=87.8°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C2@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C3
LOCATION
GRID LINE = GL F-5 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.5080 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 148.03 34.46 82.47 0.418 Capacity OK
2 COMBI2 94.06 39.71 82.57 0.481 Capacity OK
3 COMBI3 94.06 39.71 82.57 0.481 Capacity OK
4 COMBI4 112.30 20.35 33.83 0.602 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=6.6° Ultimate ϴ=6.6° Ultimate ϴ=65.9° Ultimate ϴ=7.7°
Nominal ϴ=6.6° Nominal ϴ=6.6° Nominal ϴ=65.9° Nominal ϴ=7.7°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C2@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C3
LOCATION
GRID LINE = GL F-5 RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.5080 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 45.26 13.72 76.04 0.180 Capacity OK
2 COMBI2 30.64 23.82 74.46 0.320 Capacity OK
3 COMBI3 30.64 23.82 74.46 0.320 Capacity OK
4 COMBI4 37.57 10.78 44.90 0.240 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=0.6° Ultimate ϴ=0.6° Ultimate ϴ=50.5° Ultimate ϴ=9.2°
Nominal ϴ=0.6° Nominal ϴ=0.6° Nominal ϴ=50.5° Nominal ϴ=9.2°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C3@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C4
LOCATION
GRID LINE = GL F-7 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2934 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 8-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 189.78 59.94 66.53 0.901 Capacity OK
2 COMBI2 189.78 59.94 66.53 0.901 Capacity OK
3 COMBI3 131.20 50.01 97.90 0.511 Capacity OK
4 COMBI4 189.78 59.94 66.53 0.901 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=45.7° Ultimate ϴ=22.3° Ultimate ϴ=45.7° Ultimate ϴ=45.7°
Nominal ϴ=45.7° Nominal ϴ=22.3° Nominal ϴ=45.7° Nominal ϴ=45.7°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C3@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C4
LOCATION
GRID LINE = GL F-7 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.0106 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 8-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 77.88 5.28 60.42 0.087 Capacity OK
2 COMBI2 48.78 32.69 79.48 0.411 Capacity OK
3 COMBI3 48.78 32.69 79.48 0.411 Capacity OK
4 COMBI4 16.14 28.68 32.19 0.891 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=18° Ultimate ϴ=18° Ultimate ϴ=83.9° Ultimate ϴ=38.9°
Nominal ϴ=18° Nominal ϴ=18° Nominal ϴ=83.9° Nominal ϴ=38.9°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C6@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C5
LOCATION
GRID LINE = GL D-2 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2368 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 10-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 440.22 2.34 102.65 0.023 Capacity OK
2 COMBI2 421.97 113.06 124.58 0.908 Capacity OK
3 COMBI3 421.97 113.06 124.58 0.908 Capacity OK
4 COMBI4 421.97 113.06 124.58 0.908 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160 180 200
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=13.1° Ultimate ϴ=13.1° Ultimate ϴ=13.1° Ultimate ϴ=29.2°
Nominal ϴ=13.1° Nominal ϴ=13.1° Nominal ϴ=13.1° Nominal ϴ=29.2°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C9@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C6
LOCATION
GRID LINE = GL E-5 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 422.99 1.28 46.04 0.028 Capacity OK
2 COMBI2 331.58 49.77 69.98 0.711 Capacity OK
3 COMBI3 331.58 49.77 69.98 0.711 Capacity OK
4 COMBI4 322.11 26.10 45.22 0.577 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=19° Ultimate ϴ=19° Ultimate ϴ=50.8° Ultimate ϴ=50°
Nominal ϴ=19° Nominal ϴ=19° Nominal ϴ=50.8° Nominal ϴ=50°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C9@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C6
LOCATION
GRID LINE = GL E-5 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 195.03 47.25 67.74 0.697 Capacity OK
2 COMBI2 178.68 48.14 66.73 0.721 Capacity OK
3 COMBI3 76.97 47.84 66.55 0.719 Capacity OK
4 COMBI4 178.68 48.14 66.73 0.721 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 10 20 30 40 50 60 70 80 90 100
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=27.4° Ultimate ϴ=26.3° Ultimate ϴ=27.4° Ultimate ϴ=26.1°
Nominal ϴ=27.4° Nominal ϴ=26.3° Nominal ϴ=27.4° Nominal ϴ=26.1°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C26@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC6
LOCATION
GRID LINE = ## RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.0106 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 8-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 100.78 85.28 87.66 0.973 Capacity OK
2 COMBI2 100.78 85.28 87.66 0.973 Capacity OK
3 COMBI3 100.78 85.28 87.66 0.973 Capacity OK
4 COMBI4 100.78 85.28 87.66 0.973 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=7.6° Ultimate ϴ=7.6° Ultimate ϴ=7.6° Ultimate ϴ=7.6°
Nominal ϴ=7.6° Nominal ϴ=7.6° Nominal ϴ=7.6° Nominal ϴ=7.6°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C10@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C7
LOCATION
GRID LINE = GL E-7 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2064 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 257.43 19.83 53.08 0.374 Capacity OK
2 COMBI2 111.58 45.21 51.33 0.881 Capacity OK
3 COMBI3 100.06 42.31 82.36 0.514 Capacity OK
4 COMBI4 111.58 45.21 51.33 0.881 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=87.3° Ultimate ϴ=20.1° Ultimate ϴ=87.3° Ultimate ϴ=86.7°
Nominal ϴ=87.3° Nominal ϴ=20.1° Nominal ϴ=87.3° Nominal ϴ=86.7°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C10@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C7
LOCATION
GRID LINE = GL E-7 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.5080 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 73.77 50.68 77.84 0.651 Capacity OK
2 COMBI2 73.77 50.68 77.84 0.651 Capacity OK
3 COMBI3 73.77 50.68 77.84 0.651 Capacity OK
4 COMBI4 43.63 39.35 64.02 0.615 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=13.5° Ultimate ϴ=13.5° Ultimate ϴ=29.4° Ultimate ϴ=13.5°
Nominal ϴ=13.5° Nominal ϴ=13.5° Nominal ϴ=29.4° Nominal ϴ=13.5°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C18@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C8
LOCATION
GRID LINE = GL C-4 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2368 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 10-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 463.51 2.47 121.22 0.020 Capacity OK
2 COMBI2 440.82 90.73 113.17 0.802 Capacity OK
3 COMBI3 440.82 90.73 113.17 0.802 Capacity OK
4 COMBI4 440.82 90.73 113.17 0.802 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160 180 200
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=21.1° Ultimate ϴ=21.1° Ultimate ϴ=21.1° Ultimate ϴ=13°
Nominal ϴ=21.1° Nominal ϴ=21.1° Nominal ϴ=21.1° Nominal ϴ=13°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C18@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C8
LOCATION
GRID LINE = GL C-4 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2934 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 8-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 240.87 85.95 115.37 0.745 Capacity OK
2 COMBI2 240.87 85.95 115.37 0.745 Capacity OK
3 COMBI3 240.87 85.95 115.37 0.745 Capacity OK
4 COMBI4 234.98 26.23 39.96 0.656 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=2° Ultimate ϴ=2° Ultimate ϴ=67.9° Ultimate ϴ=2°
Nominal ϴ=2° Nominal ϴ=2° Nominal ϴ=67.9° Nominal ϴ=2°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C14@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C9
LOCATION
GRID LINE = GL B-6 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 500

450
BASIC SECTION PROPERTIES
400
TOTAL WIDTH = 250 mm
TOTAL HEIGHT = 500 mm 350

CONCRETE COVER = 38 mm 300

250
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 200

STEEL STRENGTH (f'y ) = 415 Mpa 150

STEEL RATIO (As /Ag ) = 2.5736 %
100
DIAMETER OF REBARS
PERIMETER REBARS = 16-16mmØ 50

EDGE REBARS -1 = -0mmØ 0

EDGE REBARS -2 = -0mmØ 0 100 200 300 400 500

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 382.33 85.34 86.18 0.990 Capacity OK
2 COMBI2 285.68 92.08 125.95 0.731 Capacity OK
3 COMBI3 334.86 73.53 183.74 0.400 Capacity OK
4 COMBI4 382.33 85.34 86.18 0.990 Capacity OK

INTERACTION DIAGRAM
4000

3500

3000

2500
AXIAL CAPACITY (kN)

2000

1500

1000

500

0
0 50 100 150 200 250 300
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=51.3° Ultimate ϴ=28.2° Ultimate ϴ=70.7° Ultimate ϴ=70.7°
Nominal ϴ=51.3° Nominal ϴ=28.2° Nominal ϴ=70.7° Nominal ϴ=70.7°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C14@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C9
LOCATION
GRID LINE = GL B-6 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.0106 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 8-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 233.54 49.55 51.67 0.959 Capacity OK
2 COMBI2 233.54 49.55 51.67 0.959 Capacity OK
3 COMBI3 233.54 49.55 51.67 0.959 Capacity OK
4 COMBI4 233.54 49.55 51.67 0.959 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 10 20 30 40 50 60 70 80
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=46.8° Ultimate ϴ=46.8° Ultimate ϴ=46.8° Ultimate ϴ=46.8°
Nominal ϴ=46.8° Nominal ϴ=46.8° Nominal ϴ=46.8° Nominal ϴ=46.8°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C12@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C10
LOCATION
GRID LINE = ## RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2934 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 8-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 356.22 33.39 77.33 0.432 Capacity OK
2 COMBI2 343.77 95.45 98.52 0.969 Capacity OK
3 COMBI3 343.77 95.45 98.52 0.969 Capacity OK
4 COMBI4 223.78 71.67 95.59 0.750 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=13.9° Ultimate ϴ=13.9° Ultimate ϴ=22.7° Ultimate ϴ=33.6°
Nominal ϴ=13.9° Nominal ϴ=13.9° Nominal ϴ=22.7° Nominal ϴ=33.6°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C12@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C10
LOCATION
GRID LINE = ## RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2934 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 8-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 355.18 86.46 90.19 0.959 Capacity OK
2 COMBI2 355.18 86.46 90.19 0.959 Capacity OK
3 COMBI3 355.18 86.46 90.19 0.959 Capacity OK
4 COMBI4 355.18 86.46 90.19 0.959 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=21.3° Ultimate ϴ=21.3° Ultimate ϴ=21.3° Ultimate ϴ=21.3°
Nominal ϴ=21.3° Nominal ϴ=21.3° Nominal ϴ=21.3° Nominal ϴ=21.3°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C4@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C11
LOCATION
GRID LINE = GL A-3 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2934 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 8-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 297.66 10.32 94.55 0.109 Capacity OK
2 COMBI2 185.42 84.96 104.92 0.810 Capacity OK
3 COMBI3 185.42 84.96 104.92 0.810 Capacity OK
4 COMBI4 279.11 71.14 90.64 0.785 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=15.1° Ultimate ϴ=15.1° Ultimate ϴ=25.1° Ultimate ϴ=20.8°
Nominal ϴ=15.1° Nominal ϴ=15.1° Nominal ϴ=25.1° Nominal ϴ=20.8°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C13@NGL Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C12
LOCATION
GRID LINE = GL A-6 RC-COLUMN CROSS SECTION
STOREY = NGL UP TO 2ND 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 250 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2368 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 10-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 450.12 0.52 68.19 0.008 Capacity OK
2 COMBI2 210.10 131.21 141.64 0.926 Capacity OK
3 COMBI3 210.10 131.21 141.64 0.926 Capacity OK
4 COMBI4 215.07 91.32 122.81 0.744 Capacity OK

INTERACTION DIAGRAM
3000

2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160 180 200
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=8.2° Ultimate ϴ=8.2° Ultimate ϴ=21.4° Ultimate ϴ=57.9°
Nominal ϴ=8.2° Nominal ϴ=8.2° Nominal ϴ=21.4° Nominal ϴ=57.9°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C13@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C12
LOCATION
GRID LINE = GL A-6 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 2.2934 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 8-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 257.37 70.60 113.98 0.619 Capacity OK
2 COMBI2 161.71 105.25 111.22 0.946 Capacity OK
3 COMBI3 161.71 105.25 111.22 0.946 Capacity OK
4 COMBI4 161.71 105.25 111.22 0.946 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120 140 160
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=10.1° Ultimate ϴ=10.1° Ultimate ϴ=10.1° Ultimate ϴ=2.3°
Nominal ϴ=10.1° Nominal ϴ=10.1° Nominal ϴ=10.1° Nominal ϴ=2.3°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C13@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column C12
LOCATION
GRID LINE = GL A-6 RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 76.53 16.86 27.64 0.610 Capacity OK
2 COMBI2 72.09 25.49 71.50 0.356 Capacity OK
3 COMBI3 72.09 25.49 71.50 0.356 Capacity OK
4 COMBI4 76.53 16.86 27.64 0.610 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=14.2° Ultimate ϴ=14.2° Ultimate ϴ=77.6° Ultimate ϴ=77.6°
Nominal ϴ=14.2° Nominal ϴ=14.2° Nominal ϴ=77.6° Nominal ϴ=77.6°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C19@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC1
LOCATION
GRID LINE = GL F-4 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 163.24 45.07 82.24 0.548 Capacity OK
2 COMBI2 140.87 54.64 64.54 0.847 Capacity OK
3 COMBI3 140.87 54.64 64.54 0.847 Capacity OK
4 COMBI4 140.87 54.64 64.54 0.847 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=29.7° Ultimate ϴ=29.7° Ultimate ϴ=29.7° Ultimate ϴ=8.5°
Nominal ϴ=29.7° Nominal ϴ=29.7° Nominal ϴ=29.7° Nominal ϴ=8.5°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C19@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC1
LOCATION
GRID LINE = GL F-4 RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 48.90 17.32 27.30 0.635 Capacity OK
2 COMBI2 34.88 26.02 27.63 0.942 Capacity OK
3 COMBI3 27.95 13.19 62.73 0.210 Capacity OK
4 COMBI4 34.88 26.02 27.63 0.942 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=74.2° Ultimate ϴ=18.7° Ultimate ϴ=74.2° Ultimate ϴ=84.2°
Nominal ϴ=74.2° Nominal ϴ=18.7° Nominal ϴ=74.2° Nominal ϴ=84.2°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C6@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC2
LOCATION
GRID LINE = GL D-2 RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 217.32 45.15 59.58 0.758 Capacity OK
2 COMBI2 217.32 45.15 59.58 0.758 Capacity OK
3 COMBI3 217.32 45.15 59.58 0.758 Capacity OK
4 COMBI4 184.40 39.28 52.00 0.755 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 10 20 30 40 50 60 70 80 90
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=35.8° Ultimate ϴ=35.8° Ultimate ϴ=43.7° Ultimate ϴ=35.8°
Nominal ϴ=35.8° Nominal ϴ=35.8° Nominal ϴ=43.7° Nominal ϴ=35.8°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C22@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC3
LOCATION
GRID LINE = ## RC-COLUMN CROSS SECTION
STOREY = RD 500

450
BASIC SECTION PROPERTIES
400
TOTAL WIDTH = 300 mm
TOTAL HEIGHT = 500 mm 350

CONCRETE COVER = 38 mm 300

250
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 200

STEEL STRENGTH (f'y ) = 415 Mpa 150

STEEL RATIO (As /Ag ) = 2.2955 %
100
DIAMETER OF REBARS
CORNER REBARS = 16-16mmØ 50

EDGE REBARS -1 = 2-12mmØ 0

EDGE REBARS -2 = -0mmØ 0 100 200 300 400 500

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 178.72 130.72 184.07 0.710 Capacity OK
2 COMBI2 178.72 130.72 184.07 0.710 Capacity OK
3 COMBI3 135.52 124.13 229.46 0.541 Capacity OK
4 COMBI4 150.10 124.59 128.80 0.967 Capacity OK

INTERACTION DIAGRAM
4500

4000

3500

3000
AXIAL CAPACITY (kN)

2500

2000

1500

1000

500

0
0 50 100 150 200 250 300 350
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=33.9° Ultimate ϴ=13.7° Ultimate ϴ=81° Ultimate ϴ=33.9°
Nominal ϴ=33.9° Nominal ϴ=13.7° Nominal ϴ=81° Nominal ϴ=33.9°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C23@RD Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC4
LOCATION
GRID LINE = ## RC-COLUMN CROSS SECTION
STOREY = RD 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.5080 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 54.22 46.34 77.18 0.600 Capacity OK
2 COMBI2 46.45 67.44 76.32 0.884 Capacity OK
3 COMBI3 46.45 67.44 76.32 0.884 Capacity OK
4 COMBI4 26.25 67.31 68.10 0.988 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=8.7° Ultimate ϴ=8.7° Ultimate ϴ=21.7° Ultimate ϴ=9.5°
Nominal ϴ=8.7° Nominal ϴ=8.7° Nominal ϴ=21.7° Nominal ϴ=9.5°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C23@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC4
LOCATION
GRID LINE = ## RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.5080 % 100

DIAMETER OF REBARS
50
PERIMETER REBARS = 6-16mmØ
EDGE REBARS -1 = -0mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 26.35 9.56 72.87 0.131 Capacity OK
2 COMBI2 0.95 12.83 69.04 0.186 Capacity OK
3 COMBI3 0.95 12.83 69.04 0.186 Capacity OK
4 COMBI4 5.98 8.91 30.39 0.293 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=3.2° Ultimate ϴ=3.2° Ultimate ϴ=70.2° Ultimate ϴ=9.2°
Nominal ϴ=3.2° Nominal ϴ=3.2° Nominal ϴ=70.2° Nominal ϴ=9.2°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: C16@ROOF1 Date: Sep-22-2022 Date:
DESIGN OF COLUMN AS PER NSCP 2015

Column PC5
LOCATION
GRID LINE = GL F-6 RC-COLUMN CROSS SECTION
STOREY = ROOF1 400

350
BASIC SECTION PROPERTIES
TOTAL WIDTH = 200 mm 300
TOTAL HEIGHT = 400 mm
CONCRETE COVER = 38 mm 250

200
STRUCTURAL PROPERTIES
CONCRETE STRENGTH (f'c ) = 20.7 Mpa 150
STEEL STRENGTH (f'y ) = 415 Mpa
STEEL RATIO (As /Ag ) = 1.2881 % 100

DIAMETER OF REBARS
50
CORNER REBARS = 4-16mmØ
EDGE REBARS -1 = 2-12mmØ 0
EDGE REBARS -2 = -0mmØ 0 100 200 300 400

EDGE REBARS -3 = -0mmØ

RESULT SUMMARY
Sr. No Combination Pu (kN) Muxy (kNm) ØMnxy (kNm) Cap. Ratio Remarks
1 COMBI1 31.64 22.34 63.68 0.351 Capacity OK
2 COMBI2 31.64 22.34 63.68 0.351 Capacity OK
3 COMBI3 31.64 22.34 63.68 0.351 Capacity OK
4 COMBI4 24.71 12.32 40.02 0.308 Capacity OK

INTERACTION DIAGRAM
2500

2000
AXIAL CAPACITY (kN)

1500

1000

500

0
0 20 40 60 80 100 120
MOMENT CAPACITY (kNm)
Load 2 (Mxy Max) Load 3 (Mx Max) Load 4 (My Max) Load 1 (Pu Max)
Ultimate ϴ=17.6° Ultimate ϴ=17.6° Ultimate ϴ=54.4° Ultimate ϴ=17.6°
Nominal ϴ=17.6° Nominal ϴ=17.6° Nominal ϴ=54.4° Nominal ϴ=17.6°
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: Date: Apr-27-22 Date:
DESIGN OF FOOTING : SYMBOLS & NOTATIONS, and LOAD COMBINATION

Material Properties:
f'c = Specified compressive strength of concrete, Mpa
fy = Specified yield strength of non-prestressed reinforcement, Mpa
λ = Shear Modification Factor for Light Weight Concrete

Soil Properties:
SBCA = Soil Bearing Capacity on laboratory test results
SF = Safety Factor
SBC = Soil Bearing Capacity to be use on Design

Axial Loads (Service Condition):

PDL = Axial Load based on DeadLoads only
PLL = Axial Load based on Liveloads only
PEQ = Axial Load based on Earthquake only
PWL = Axial Load based on Windload only

Column Dimension:
X = Column Dimension along Length of Footing
Y = Column Dimension along Width of Footing

}
Loc = Center Location
Edge of Column
Corner

Footing Parameters:
Øm = Rebar Diameter to be Use
L = Length (Longer Dimension of Footing)
W = Width (Shorter Dimension of Footing)
t = Thickness of Footing
nL = quantity of rebar along side "L"
nW = quantity of rebar along side "W"

NSCP REQUIREMENTS
ρ = Reliability/Redundancy Factor, NSCP 208-3
Ca = Seismic Coefficient, NSCP table 208.7
I = Importance Factor, NSCP table 208.1

SERVICE LOAD COMBINATIONS ULTIMATE LOAD COMBINATIONS

BASIC LOAD COMBINATION LC1 = 1.4PDL
LC1 = PDL + PLL LC2 = 1.2PDL + 1.6PLL
LC2 = PDL + 0.6PWL LC3 = 1.2PDL + PLL + PWL
LC3 = PDL + PEQ/1.4 LC4 = (1.2+0.5CaI)*PDL + PLL + PEQ
ALTERNATE BASIC LOAD COMBINATION
LC4 = PDL + 0.75PLL + 0.45PWL )
LC5 = PDL + 0.75PLL + 0.536PEL )

DESIGN SYMBOLS
Areqd = Area Required dX = Effective Depth along specified Side
Aprov = Area Provided fs = Elastic Steel Stress
a = Area of Punching Failure L' = Distance of Footing End to Column @ L
A = Area of Footing Mn = Nominal Moment Capacity
AsX = Area of Rebars along specified Side Mu = Ultimate Moment to be Resist
Ag = Concrete Area perpendicular to Rebar PS = Maximum Service Load Combination
αs = Column Location Factor PU = Maximum Ultimate Load Combination
bo = Perimeter of Punching Failure φ = 0.75 for shear, 0.65-0.9 for flexure
bW = Base width perpendicular to Rebar qu = Soil Uplift Pressure
βR = Ratio of Column Length to Width ρW = Steel Ratio to Concrete Area
βW = Whitneys Constant Vc = Reinforced Concrete Shear Strength
c = Neutral Axis to Extreme Fiber Vu = Ultimate Shear Load
D/C = Demand-Capacity Ratio W' = Distance of Footing End to Column @ W
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: 1 Design by: SAC Checked by:
Subject: Date: 04/27/22 Date:
DESIGN OF FOOTING : FORMULAS

CHECK FOOTING DIMENSION

TO SATISFY : Areqd ≤ Aprov WHERE:
Areqd = Ps / (k * SBC) k = 1.33 if maximum service load
Aprov = LW include earthquake
1 if not
CHECK FOR SHEAR ALONG SIDE "L"
TO SATISFY : Vu ≤ φVc WHERE:
FORMULAS qu = Pu / Aprov
Vu = quL(W' - dW) W' = 0.5 ( W - Y)
Vc = (0.16λ√f'c + 17ρwVudW/Mu)bWdW dW t - 75mm - 3*Øm/2

} Least of =
= (0.16λ√f'c + 17ρw)bWdW the 3 ρw = AsW / bwdW
= 0.29λ√f'c bwd equation bw = L
AsW = nWπØm2 / 4
CHECK FOR SHEAR ALONG SIDE "W"
TO SATISFY : Vu ≤ φVc WHERE:
FORMULAS qu = Pu / Aprov
Vu = quW(L' - dL) L' = 0.5 ( L - X )
Vc = (0.16λ√f'c + 17ρwVudL/Mu)bwdL dL t - 75mm - Øm/2

} Least of =
= (0.16λ√f'c + 17ρw)bwdL the 3 ρw = AsL / bwdL
= 0.29λ√f'c bwd equation bw = W
AsL = nLπØm2 / 4
CHECK FOR PUNCHING
TO SATISFY : Vu ≤ φVc WHERE:
FORMULAS qu = Pu / Aprov
Vu = qu(A - a) A = LW
Vc = 0.33λ√f'c bodmin ( Y + dL ) ( X + d W )

} Least of a =
= 0.17(1+2/β)λ√f'c bodmin the 3 bo = 2 ( Y + d L + X + dW )
= 0.083(2+αsd/bo)λ√f'c bodmin equation βR = X/Y or Y/X whichever is Larger
αs = 40 for Center Column
30 for Edge Column
20 for Corner Column
CHECK FOR MOMENT (REBAR ALONG "W")
TO SATISFY : Mu ≤ φMn WHERE:
As ≤ As,min qu = Pu / Aprov
FORMULAS W' = 0.5 ( W - Y )
Mu = quLW'(W'/2) βW = 0.85 > 0.85*0.05(f'c-28)/7 > 0.65
Mn = 0.85f'cβc(dW-βc/2) c = 600dW/(600+fs)
As = nWπØm2 / 4 Ag = Lt
As,min = 0.002Ag if fy<420 bw = L
= 0.0014Ag if fy≥420
= 0.756Ag/fy if fy≥420

CHECK FOR MOMENT (REBAR ALONG "L")

TO SATISFY : Mu ≤ φMn WHERE:
As ≤ As,min qu = Pu / Aprov
FORMULAS L' = 0.5 ( L - X )
Mu = quWL'(L'/2) βW = 0.85 > 0.85*0.05(f'c-28)/7 > 0.65
Mn = 0.85f'cβc(dL-βc/2) c = 600dL/(600+fs)
As = nLπØm2 / 4 Ag = Wt
As,min = 0.002Ag if fy<420 bw = W
= 0.0014Ag if fy≥420
= 0.756Ag/fy if fy≥420
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: F1 Date: Sep-22-22 Date:
DESIGN OF FOOTING
INPUT DATA:
800
Material Properties:
f'c = 20.7 MPa 700
fy = 415 MPa
λ = 1 600

500
Soil Bearing Capacity

WIDTH
SBC = 527 kPa 400

300
Axial Loads (Service Condition):
PDL = 135.9371 kN 200
PLL = 11.39496 kN
100
PEQ = 50.9788 kN
PWL = 35.364 kN 0 LENGTH
0 200 400 600 800 1000 1200 1400

Footing Parameters: Column Dimension:

t = 300 mm Loc = Edge
L = 1400 mm dL = 206.00 mm Y = 200 mm L' = 500.00 mm
W = 700 mm dW = 222.00 mm X = 400 mm W' = 500.00 mm
Øm = 16 mm
nL = 3 pcs AsL = 603.19 mm2 NSCP REQUIREMENTS
s = 272.00 mm ≤450 ∴OKAY ρ = 1
2
nW = 5 pcs AsW = 1005.31 mm Ca = 0.5
s = 311.00 mm ≤450 ∴OKAY I = 1

DESIGN COMPUTATION:
SERVICE LOAD COMBINATIONS FOOTING DIMENSION CHECKING
BASIC LOAD COMBINATION Ps = 171.79 kN
LC1 = 147.3321 kN Areqd = 0.24 m2
LC2 = 157.1555 kN Aprov = 0.98 m2
LC3 = 172.3505 kN D/C = 0.25
ALTERNATE BASIC LOAD COMBINATION ∴ SAFE
LC4 = 160.3971 kN
LC5 = 171.7934 kN PUNCHING SHEAR CHECK
Vu = 192.62 kN
ULTIMATE LOAD COMBINATIONS Vc = 635.90 kN ∴ φVc=476.93 kN
LC1 = 190.3119 kN = 655.17 kN
LC2 = 181.3565 kN = 800.63 kN
LC3 = 209.8835 kN D/C = 0.40
LC4 = 259.4826 kN ∴ qu=264.78 kPa ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "L" CHECK FOR MOMENT (REBAR ALONG "L")
Vu = 103.0516 kN Mu = 23.17 β = 0.85
Vc = 233.65 kN ∴ φVc=175.24 kN fs = 4569.2259 As = 603.19
= 243.34 kN c = 23.91 Asmin 420 OKAY
= 410.08 kN Mn = 49.02
D/C = 0.59 φ = 0.90 D/C = 0.53
∴ SAFE φMn = 44.12 kNm ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "W" CHECK FOR MOMENT (REBAR ALONG "W")
Vu = 54.49134 kN Mu = 52.80 β = 0.85
Vc = 109.94 kN ∴ φVc=82.45 kN fs = 6084.863 As = 1005.31
= 115.23 kN c = 19.93 Asmin = 840 OKAY
= 190.26 kN Mn = 89.09
D/C = 0.66 φ = 0.90 D/C = 0.66
∴ SAFE φMn = 80.18 kNm ∴ SAFE
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: F2 Date: Sep-22-22 Date:
DESIGN OF FOOTING
INPUT DATA:
1000
Material Properties:
f'c = 20.7 MPa 900
fy = 415 MPa 800
λ = 1
700

600
Soil Bearing Capacity

WIDTH
SBC = 527 kPa 500

400
Axial Loads (Service Condition): 300
PDL = 187.1496 kN
200
PLL = 22.31706 kN
PEQ = 36.8581 kN 100

PWL = 30.6406 kN 0 LENGTH

0 200 400 600 800 1000 1200 1400 1600 1800 2000

Footing Parameters: Column Dimension:

t = 350 mm Loc = Edge
L = 1000 mm dL = 272.00 mm Y = 400 mm L' = 400.00 mm
W = 1000 mm dW = 256.00 mm X = 200 mm W' = 600.00 mm
Øm = 16 mm
nL = 4 pcs AsL = 804.25 mm2 NSCP REQUIREMENTS
s = 281.33 mm ≤450 ∴OKAY ρ = 1
2
nW = 4 pcs AsW = 804.25 mm Ca = 0.5
s = 281.33 mm ≤450 ∴OKAY I = 1

DESIGN COMPUTATION:
SERVICE LOAD COMBINATIONS FOOTING DIMENSION CHECKING
BASIC LOAD COMBINATION Ps = 223.63 kN
LC1 = 209.4667 kN Areqd = 0.32 m2
LC2 = 205.534 kN Aprov = 1.00 m2
LC3 = 213.4768 kN D/C = 0.32
ALTERNATE BASIC LOAD COMBINATION ∴ SAFE
LC4 = 217.6757 kN
LC5 = 223.6328 kN PUNCHING SHEAR CHECK
Vu = 229.25 kN
ULTIMATE LOAD COMBINATIONS Vc = 867.12 kN ∴ φVc=650.34 kN
LC1 = 262.0094 kN = 2233.49 kN
LC2 = 260.2868 kN = 1178.63 kN
LC3 = 277.5372 kN D/C = 0.35
LC4 = 330.5421 kN ∴ qu=330.54 kPa ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "L" CHECK FOR MOMENT (REBAR ALONG "L")
Vu = 113.7065 kN Mu = 26.44 β = 0.85
Vc = 195.86 kN ∴ φVc=146.89 kN fs = 6712.9132 As = 804.25
= 200.03 kN c = 22.32 Asmin 700 OKAY
= 337.77 kN Mn = 87.62
D/C = 0.77 φ = 0.90 D/C = 0.34
∴ SAFE φMn = 78.86 kNm ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "W" CHECK FOR MOMENT (REBAR ALONG "W")
Vu = 42.30939 kN Mu = 41.88 β = 0.85
Vc = 203.95 kN ∴ φVc=152.97 kN fs = 6282.7418 As = 804.25
= 211.68 kN c = 22.32 Asmin = 700 OKAY
= 358.88 kN Mn = 82.28
D/C = 0.28 φ = 0.90 D/C = 0.57
∴ SAFE φMn = 74.05 kNm ∴ SAFE
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: F3 Date: Sep-22-22 Date:
DESIGN OF FOOTING
INPUT DATA:
1000
Material Properties:
f'c = 20.7 MPa 900
fy = 415 MPa 800
λ = 1
700

600
Soil Bearing Capacity

WIDTH
SBC = 527 kPa 500

400
Axial Loads (Service Condition): 300
PDL = 73.3745 kN
200
PLL = 5.97528 kN
PEQ = 74.7312 kN 100

PWL = 3.6093 kN 0 LENGTH

0 200 400 600 800 1000 1200 1400 1600 1800 2000

Footing Parameters: Column Dimension:

t = 300 mm Loc = Corner
L = 1000 mm dL = 222.00 mm Y = 200 mm L' = 600.00 mm
W = 1000 mm dW = 206.00 mm X = 400 mm W' = 800.00 mm
Øm = 16 mm
nL = 5 pcs AsL = 1005.31 mm2 NSCP REQUIREMENTS
s = 211.00 mm ≤450 ∴OKAY ρ = 1
2
nW = 5 pcs AsW = 1005.31 mm Ca = 0.5
s = 211.00 mm ≤450 ∴OKAY I = 1

DESIGN COMPUTATION:
SERVICE LOAD COMBINATIONS FOOTING DIMENSION CHECKING
BASIC LOAD COMBINATION Ps = 117.89 kN
LC1 = 79.34978 kN Areqd = 0.17 m2
LC2 = 75.54008 kN Aprov = 1.00 m2
LC3 = 126.7539 kN D/C = 0.17
ALTERNATE BASIC LOAD COMBINATION ∴ SAFE
LC4 = 79.48015 kN
LC5 = 117.8905 kN PUNCHING SHEAR CHECK
Vu = 139.25 kN
ULTIMATE LOAD COMBINATIONS Vc = 635.90 kN ∴ φVc=476.93 kN
LC1 = 102.7243 kN = 655.17 kN
LC2 = 97.60985 kN = 640.38 kN
LC3 = 97.63398 kN D/C = 0.29
LC4 = 187.0995 kN ∴ qu=187.1 kPa ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "L" CHECK FOR MOMENT (REBAR ALONG "L")
Vu = 111.1371 kN Mu = 33.68 β = 0.85
Vc = 156.35 kN ∴ φVc=117.26 kN fs = 4174.9021 As = 1005.31
= 167.05 kN c = 27.90 Asmin 600 OKAY
= 271.80 kN Mn = 87.67
D/C = 0.95 φ = 0.90 D/C = 0.43
∴ SAFE φMn = 78.91 kNm ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "W" CHECK FOR MOMENT (REBAR ALONG "W")
Vu = 70.72361 kN Mu = 61.22 β = 0.85
Vc = 169.57 kN ∴ φVc=127.18 kN fs = 3830.765 As = 1005.31
= 178.70 kN c = 27.90 Asmin = 600 OKAY
= 292.91 kN Mn = 81.00
D/C = 0.56 φ = 0.90 D/C = 0.84
∴ SAFE φMn = 72.90 kNm ∴ SAFE
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: F4 Date: Sep-22-22 Date:
DESIGN OF FOOTING
INPUT DATA:
1000
Material Properties:
f'c = 20.7 MPa 900
fy = 415 MPa 800
λ = 1
700

600
Soil Bearing Capacity

WIDTH
SBC = 527 kPa 500

400
Axial Loads (Service Condition): 300
PDL = 261.8988 kN
200
PLL = 34.95582 kN
PEQ = 18.8319 kN 100

PWL = 17.5647 kN 0 LENGTH

0 200 400 600 800 1000 1200 1400 1600 1800 2000

Footing Parameters: Column Dimension:

t = 300 mm Loc = Center
L = 1000 mm dL = 222.00 mm Y = 200 mm L' = 300.00 mm
W = 1000 mm dW = 206.00 mm X = 400 mm W' = 400.00 mm
Øm = 16 mm
nL = 4 pcs AsL = 804.25 mm2 NSCP REQUIREMENTS
s = 281.33 mm ≤450 ∴OKAY ρ = 1
2
nW = 4 pcs AsW = 804.25 mm Ca = 0.5
s = 281.33 mm ≤450 ∴OKAY I = 1

DESIGN COMPUTATION:
SERVICE LOAD COMBINATIONS FOOTING DIMENSION CHECKING
BASIC LOAD COMBINATION Ps = 298.20 kN
LC1 = 296.8546 kN Areqd = 0.42 m2
LC2 = 272.4376 kN Aprov = 1.00 m2
LC3 = 275.3502 kN D/C = 0.42
ALTERNATE BASIC LOAD COMBINATION ∴ SAFE
LC4 = 296.0198 kN
LC5 = 298.2042 kN PUNCHING SHEAR CHECK
Vu = 322.67 kN
ULTIMATE LOAD COMBINATIONS Vc = 635.90 kN ∴ φVc=476.93 kN
LC1 = 366.6583 kN = 655.17 kN
LC2 = 370.2079 kN = 960.88 kN
LC3 = 366.7991 kN D/C = 0.68
LC4 = 433.541 kN ∴ qu=433.54 kPa ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "L" CHECK FOR MOMENT (REBAR ALONG "L")
Vu = 84.10695 kN Mu = 21.57 β = 0.85
Vc = 158.03 kN ∴ φVc=118.52 kN fs = 5368.6277 As = 804.25
= 163.63 kN c = 22.32 Asmin 600 OKAY
= 271.80 kN Mn = 70.93
D/C = 0.71 φ = 0.90 D/C = 0.34
∴ SAFE φMn = 63.84 kNm ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "W" CHECK FOR MOMENT (REBAR ALONG "W")
Vu = 33.8162 kN Mu = 29.35 β = 0.85
Vc = 166.37 kN ∴ φVc=124.77 kN fs = 4938.4563 As = 804.25
= 175.28 kN c = 22.32 Asmin = 600 OKAY
= 292.91 kN Mn = 65.59
D/C = 0.27 φ = 0.90 D/C = 0.50
∴ SAFE φMn = 59.03 kNm ∴ SAFE
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: CF1(B) Date: Sep-22-22 Date:
DESIGN OF FOOTING
INPUT DATA:
Material Properties: SOIL PRESSURE
f'c = 20.7 MPa MAXIMUM SOIL PRESSURE
fy = 415 MPa = -130.659 Kpa
λ = 1
MINIMUM SOIL PRESSURE
Soil Bearing Capacity = -231.723 Kpa
SBC = 527 kPa
ALLOWABLE SOIL PRESSURE
Axial Loads (Service Condition): = -527 Kpa
PDL = 192+157 kN
PLL = 19+14 kN ∴ THEREFORE SAFE
PEQ = 52+51 kN
PWL = 46+39 kN

Footing Parameters: Column Dimension:

t = 400 mm Loc = Corner
L = 1500 mm dL = 322.00 mm Y = 200 mm L' = 1100.00 mm
W = 1500 mm dW = 306.00 mm X = 400 mm W' = 1300.00 mm
Øm = 16 mm
nL = 7 pcs AsL = 1407.43 mm2 NSCP REQUIREMENTS
s = 224.00 mm ≤450 ∴OKAY ρ = 1
2
nW = 7 pcs AsW = 1407.43 mm Ca = 0.5
s = 224.00 mm ≤450 ∴OKAY I = 1

DESIGN COMPUTATION:
SERVICE LOAD COMBINATIONS FOOTING DIMENSION CHECKING
BASIC LOAD COMBINATION Ps = 428.75 kN
LC1 = 211.29 170.35 kN Areqd = 0.81 m2
LC2 = 219.98 179.76 kN Aprov = 2.25 m2
LC3 = 229.37 193.21 kN D/C = 0.36
ALTERNATE BASIC LOAD COMBINATION ∴ SAFE
LC4 = 227.30 184.31 kN
LC5 = 234.35 194.40 kN PUNCHING SHEAR CHECK
Vu = 292.44 244.28 kN
ULTIMATE LOAD COMBINATIONS Vc = 1128.36 1128.36 kN
LC1 = 269.23 219.15 kN = 1162.56 1162.56 kN
LC2 = 261.15 209.95 kN = 1274.79 1274.79 kN
LC3 = 295.88 240.36 kN D/C = 0.35 0.29
LC4 = 349.72 292.13 kN ∴ SAFE SAFE

CHECK FOR SHEAR ALONG SIDE "L" CHECK FOR MOMENT (REBAR ALONG "L")
Vu = 231.75 193.59 kN Mu = 141.05 β = 0.85
Vc = 367.19 343.77 kN fs = 6820.456 As = 1407.43
= 358.06 351.22 kN c = 26.04 Asmin 1200 OKAY
= 605.61 605.61 kN Mn = 181.61
D/C = 0.86 0.75 φ = 0.90 D/C = 0.86
∴ SAFE SAFE φMn = 163.45 kNm ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "W" CHECK FOR MOMENT (REBAR ALONG "W")
Vu = 181.39 151.52 kN Mu = 51.33 β = 0.85
Vc = 361.51 358.68 kN fs = 6451.7377 As = 1407.43
= 375.53 368.69 kN c = 26.04 Asmin = 1200 OKAY
= 637.28 637.28 kN Mn = 172.27
D/C = 0.67 0.56 φ = 0.90 D/C = 0.33
∴ SAFE SAFE φMn = 155.04 kNm ∴ SAFE
 Project: PROPOSED THREE STOREY RESIDENTIAL BUILDING W/ ROOFDECK
Client: MRS. JO-ANN DELA CRUZ
Location: BLK 8 LOT 2 PHASE 2A DENMARK ST. MACARIA VILLAGE, BIÑAN, LAGUNA
Job. No.: Design by: SAC Checked by:
Subject: CF1(B) Date: Sep-22-22 Date:
DESIGN OF FOOTING
INPUT DATA:
Material Properties: SOIL PRESSURE
f'c = 20.7 MPa MAXIMUM SOIL PRESSURE
fy = 415 MPa = -130.659 Kpa
λ = 1
MINIMUM SOIL PRESSURE
Soil Bearing Capacity = -231.723 Kpa
SBC = 527 kPa
ALLOWABLE SOIL PRESSURE
Axial Loads (Service Condition): = -527 Kpa
PDL = 192+157 kN
PLL = 19+14 kN ∴ THEREFORE SAFE
PEQ = 52+51 kN
PWL = 46+39 kN

Footing Parameters: Column Dimension:

t = 400 mm Loc = Corner
L = 1500 mm dL = 322.00 mm Y = 200 mm L' = 1100.00 mm
W = 1500 mm dW = 306.00 mm X = 400 mm W' = 1300.00 mm
Øm = 16 mm
nL = 5 pcs AsL = 1005.31 mm2 NSCP REQUIREMENTS
s = 336.00 mm ≤450 ∴OKAY ρ = 1
2
nW = 5 pcs AsW = 1005.31 mm Ca = 0.5
s = 336.00 mm ≤450 ∴OKAY I = 1

DESIGN COMPUTATION:
SERVICE LOAD COMBINATIONS FOOTING DIMENSION CHECKING
BASIC LOAD COMBINATION Ps = 428.75 kN
LC1 = 211.29 170.35 kN Areqd = 0.81 m2
LC2 = 219.98 179.76 kN Aprov = 2.25 m2
LC3 = 229.37 193.21 kN D/C = 0.36
ALTERNATE BASIC LOAD COMBINATION ∴ SAFE
LC4 = 227.30 184.31 kN
LC5 = 234.35 194.40 kN PUNCHING SHEAR CHECK
Vu = 292.44 244.28 kN
ULTIMATE LOAD COMBINATIONS Vc = 1128.36 1128.36 kN
LC1 = 269.23 219.15 kN = 1162.56 1162.56 kN
LC2 = 261.15 209.95 kN = 1274.79 1274.79 kN
LC3 = 295.88 240.36 kN D/C = 0.35 0.29
LC4 = 349.72 292.13 kN ∴ SAFE SAFE

CHECK FOR SHEAR ALONG SIDE "L" CHECK FOR MOMENT (REBAR ALONG "L")
Vu = 231.75 193.59 kN Mu = 117.83 β = 0.85
Vc = 367.19 343.77 kN fs = 9788.6384 As = 1005.31
= 358.06 351.22 kN c = 18.60
= 605.61 605.61 kN Mn = 131.04
D/C = 0.86 0.75 φ = 0.90 D/C = 1.00
∴ SAFE SAFE φMn = 117.94 kNm ∴ SAFE

CHECK FOR SHEAR ALONG SIDE "W" CHECK FOR MOMENT (REBAR ALONG "W")
Vu = 181.39 151.52 kN Mu = 104.99 β = 0.85
Vc = 361.51 358.68 kN fs = 9272.4328 As = 1005.31
= 375.53 368.69 kN c = 18.60
= 637.28 637.28 kN Mn = 124.37
D/C = 0.67 0.56 φ = 0.90 D/C = 0.94
∴ SAFE SAFE φMn = 111.93 kNm ∴ SAFE