Light-STD X-PHY NOTES

Physics
Light – Reflection and Refraction

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REFLECTION OF LIGHT
Laws of reflection of light

1) The angle of incidence is equal to
the angle of reflection.
2) The incident ray, the normal at the
point of incidence and the reflected
ray, all lie in the same plane.
Formation of image by a plane mirror
Q) What are the properties of the image formed by a plane

mirror?
1) Image formed by a plane mirror is always virtual and erect.
2) The size of the image is equal to that of the object.
3) The distance of the object from the plane mirror is the

same as the distance of the image from the plane mirror.
4) Image is laterally inverted.
Note : Image which cannot be obtained on a screen is called Virtual Image
A spherical mirror, whose reflecting surface is curved inwards, is

called a concave mirror.
A spherical mirror whose reflecting surface is curved outwards, is

called a convex mirror.
Pole: The center of the reflecting surface of a spherical
mirror is a point called the pole. (P)
Center of curvature: The reflecting surface of a spherical

mirror forms a part of a sphere. This sphere has a center.
This point is called the center of curvature of the spherical
mirror.
Radius of curvature: The radius of the sphere of which the

reflecting surface of a spherical mirror forms a part, is called
the radius of curvature of the mirror. (R)
Principal axis: A straight line passing through the pole and

the center of curvature of a spherical mirror.
Focus: The principal focus of a spherical mirror is a point on the principal axis at which, the light rays which
are parallel to the principal axis essentially converge (meet) after reflection. (F)
Focal Length: The distance between the pole and the principal focus of a spherical mirror is called the focal
length. (f)
Aperture: The diameter of the reflecting surface of spherical mirror is called its aperture. (MN)
Relationship between the radius of curvature R, and focal length f, of a spherical mirror: R = 2f
Image formation by mirrors
There are 4 rules which are to be followed for image formation:

1) A ray parallel to the principal axis, after reflection, will pass through the principal focus in case of a concave
mirror or appear to diverge from the principal focus in case of a convex mirror.
2) A ray passing through the principal focus of a concave mirror or a ray which is directed towards the
principal focus of a convex mirror, after reflection, will emerge parallel to the principal axis.
3) A ray passing through the centre of curvature of a concave mirror or directed in the direction of the centre of
curvature of a convex mirror, after reflection, is reflected back along the same path.
4) A ray incident obliquely to the principal axis, towards pole of the mirror, on the concave mirror or a convex
mirror is reflected obliquely.
Uses of Concave Mirror:
1) Torches, search-lights and vehicles headlights to get powerful parallel beams of light.
2) Shaving mirrors to see a larger image of the face.
3) Dentists use concave mirrors to see large images of the teeth of patients.
4) Large concave mirrors are used to concentrate sunlight to produce heat in solar furnaces.
Uses of Concave Mirror:

1) Rear-view (wing) mirrors in vehicles
i) Always give an erect image
ii) Wider field of view
Sign convention
In this convention, the pole (P) of the mirror is taken as the origin. The principal axis of the mirror
is taken as the x-axis (X’X) of the coordinate system.
(i) The object is always placed to the left of the
mirror. This implies that the light from the
object falls on the mirror from the left-hand
side.
(ii) All distances parallel to the principal axis
are measured from the pole of the mirror.
(iii) All the distances measured to the right of
the origin (along + x-axis) are taken as positive
while those measured to the left of the origin
(along – x-axis) are taken as negative.
(iv) Distances measured perpendicular to and
above the principal axis (along + y-axis) are
taken as positive.
(v) Distances measured perpendicular to and below the principal axis (along –y-axis) are taken as
negative.
Solve numerical from the textbook
Refraction of Light
Refraction is due to change in the speed of light as it enters from one transparent medium to another.
Laws of refraction of light.

1) The incident ray, the refracted ray and the normal at the point of incidence, all lie in
the same plane.
2) The ratio of sine of angle of incidence to the sine of angle of refraction is a constant,
for the light of a given color and for the given pair of media. This law is also known as
Snell’s law of refraction.
Refractive index
Extent of the change in direction that takes place in a given pair of media is expressed in terms of
the refractive index.
This constant value is called the refractive index of the second medium with respect to the first.
Value of the refractive index for a given pair of media depends upon the speed of light in the two
media
The refractive index of medium 2 with respect to
medium 1 is given by the
ratio of the speed of light in medium 1 and the speed

of light in medium 2.
Absolute refractive Index: If medium 1 is vacuum or air, then the refractive index of medium 2 is
considered with respect to vacuum.
The absolute refractive index of a medium is simply called its refractive index
Ans: It means that the ratio of the speed of light in air and the speed of light in water is equal to
2.42
Convex Lens (Converging) Concave Lens (Diverging)
Centres of curvature :
 A lens has two spherical surfaces. Each of these surfaces forms a part of a sphere. The
centres of these spheres are called centres of curvature of the lens.
 The centre of curvature of a lens is usually represented by the letter C. Since there are two
centres of curvature, we may represent them as C1 and C2.
Principal axis:
 An imaginary straight line passing through the two centres of curvature of a lens is called its
principal axis.
Optical centre :
 The central point of a lens is its optical centre.
 It is usually represented by the letter O.
Aperture:
The effective diameter of the circular outline of a spherical lens is called its aperture.
Focus:
 When rays parallel to principal axis gets refracted by convex lens , they converge to a point
on principal axis, this point is called Principal focus.
 If you pass parallel rays from opposite side of lens you get another principal focus on the
opposite side.
 A lens has two principal focus, usually named F1 and F2.
 When rays parallel to principal axis gets refracted by concave lens , they appear to diverge
from a point on the principal axis , this point is called Principal focus.
 Concave lens also have two focii, usually named F1 and F2.
There are three rules which are to be followed:

Rule1) A ray of light from the object, parallel to the principal axis, after refraction from a convex
lens, passes through the principal focus on the other side of the lens, as shown in. In case of a
concave lens, the ray appears to diverge from the principal focus located on the same side of the
lens.
Rule 2) A ray of light passing through a principal focus, after refraction from a convex lens, will
emerge parallel to the principal axis. A ray of light appearing to meet at the principal focus of a
concave lens, after refraction, will emerge parallel to the principal axis.
Rule 3) A ray of light passing through the optical centre of a lens will emerge without any deviation.
Sign convention for spherical lenses
We follow sign conventions, similar to the one used for spherical mirrors. We apply the rules for signs of distances, except
that all measurements are taken from the optical centre of the lens.
Power of a lens
 The power of a lens is defined as the reciprocal of its focal length.
 It is represented by the letter P.
 The SI unit of power of a lens is ‘dioptre’. It is denoted by the letter D.
 Power of a convex lens is positive and that of a concave lens is negative.

Light-STD X-PHY NOTES

Uploaded by

Copyright:

Available Formats

Light-STD X-PHY NOTES

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Light-STD X-PHY NOTES

Uploaded by

Copyright:

Available Formats

Physics

Light – Reflection and Refraction

Laws of reflection of light

Formation of image by a plane mirror

Q) What are the properties of the image formed by a plane

2) The size of the image is equal to that of the object.

3) The distance of the object from the plane mirror is the

4) Image is laterally inverted.

Note : Image which cannot be obtained on a screen is called Virtual Image

A spherical mirror, whose reflecting surface is curved inwards, is

A spherical mirror whose reflecting surface is curved outwards, is

Center of curvature: The reflecting surface of a spherical

Radius of curvature: The radius of the sphere of which the

Principal axis: A straight line passing through the pole and

There are 4 rules which are to be followed for image formation:

Uses of Concave Mirror:

Solve numerical from the textbook

Laws of refraction of light.

ratio of the speed of light in medium 1 and the speed

Convex Lens (Converging) Concave Lens (Diverging)

There are three rules which are to be followed:

 The SI unit of power of a lens is ‘dioptre’. It is denoted by the letter D.

 Power of a convex lens is positive and that of a concave lens is negative.

You might also like