Assignment 3 Tha'Er

Tha’er obeidat 20201502065
Computer Networks
Assignment#3
P10.
Here, we add a timer, whose value is greater than the known round-trip propagation delay. We add a
timeout event to the “Wait for ACK or NAK0” and “Wait for ACK or NAK1” states. If the timeout event
occurs, the most recently transmitted packet is retransmitted. Let us see why this protocol will still work
with the rdt2.1 receiver.
• Suppose the timeout is caused by a lost data packet, i.e., a packet on the sender-to-receiver channel.
In this case, the receiver never received the previous transmission and, from the receiver's viewpoint, if
the timeout retransmission is received, it looks exactly the same as if the original transmission is being
received.
• Suppose now that an ACK is lost. The receiver will eventually retransmit the packet on a timeout. But a
retransmission is exactly the same action that if an ACK is garbled. Thus, the sender's reaction is the
same with a loss, as with a garbled ACK. The rdt 2.1 receiver can already handle the case of a garbled
ACK.
P17.
P22.
a) Here we have a window size of N=3. Suppose the receiver has received packet k-1, and has ACKed
that and all other preceding packets. If all of these ACK's have been received by sender, then sender's
window is [k, k+N-1]. Suppose next that none of the ACKs have been received at the sender. In this
second case, the sender's window contains k-1 and the N packets up to and including k-1. The sender's
window is thus [k-N, k-1]. By these arguments, the senders window is of size 3 and begins somewhere in
the range [k-N, k].
b) If the receiver is waiting for packet k, then it has received (and ACKed) packet k-1 and the N-1 packets
before that. If none of those N ACKs have been yet received by the sender, then ACK messages with
values of [k-N, k-1] may still be propagating back. Because the sender has sent packets [k-N, k-1], it must
be the case that the sender has already received an ACK for k-N-1. Once the receiver has sent an ACK for
k-N-1 it will never send an ACK that is less that k-N-1. Thus, the range of in-flight ACK values can range
from k-N-1 to k-1.
P27.
a) In the second segment from Host A to B, the sequence number is 207, source port number is 302 and
destination port number is 80.
b) If the first segment arrives before the second, in the acknowledgement of the first arriving segment,
the acknowledgement number is 207, the source port number is 80 and the destination port number is
302.
c) If the second segment arrives before the first segment, in the acknowledgement of the first arriving
segment, the acknowledgement number is 127, indicating that it is still waiting for bytes 127 and
onwards.
d)
P40.
a) TCP slow start is operating in the intervals [1,6] and [23,26]
b) TCP congestion avoidance is operating in the intervals [6,16] and [17,22]
c) After the 16th transmission round, packet loss is recognized by a triple duplicate ACK. If there was a
timeout, the congestion window size would have dropped to 1.
d) After the 22nd transmission round, segment loss is detected due to timeout, and hence the
congestion window size is set to 1.
e) The threshold is initially 32, since it is at this window size that slow start stops and congestion
avoidance begins.
f) The threshold is set to half the value of the congestion window when packet loss is detected. When
loss is detected during transmission round 16, the congestion windows size is 42. Hence the threshold is
21 during the 18th transmission round.
g) The threshold is set to half the value of the congestion window when packet loss is detected. When
loss is detected during transmission round 22, the congestion windows size is 29. Hence the threshold is
14 (taking lower floor of 14.5) during the 24th transmission round.
h) During the 1st transmission round, packet 1 is sent; packet 2-3 are sent in the 2nd transmission
round; packets 4-7 are sent in the 3rd transmission round; packets 8-15 are sent in the 4th transmission
round; packets 16-31 are sent in the 5th transmission round; packets 32-63 are sent in the 6th
transmission round; packets 64 – 96 are sent in the 7th transmission round. Thus packet 70 is sent in the
7th transmission round.
i) The threshold will be set to half the current value of the congestion window (8) when the loss
occurred and congestion window will be set to the new threshold value + 3 MSS. Thus, the new values of
the threshold and window will be 4 and 7 respectively.
j) threshold is 21, and congestion window size is 1.
k) round 17, 1 packet; round 18, 2 packets; round 19, 4 packets; round 20, 8 packets; round 21, 16
packets; round 22, 21 packets. So, the total number is 52.
if you are given the following assumptions: average object size = 50Kbits, average request rate from
institution's browsers to origin servers 18/sec, delay from institutional router to any origin server and
back to router = 2 sec.
1) What is the utilization on the institution's LAN?
2) What is the Utilization on the access link?
3) Roughly, what is the delay to satisfy a request?
4) What do you propose to lower the delay? Discuss your solution?

Assignment 3 Tha'Er

Uploaded by

Copyright:

Available Formats

Assignment 3 Tha'Er

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Assignment 3 Tha'Er

Uploaded by

Copyright:

Available Formats

Tha’er obeidat 20201502065

b) TCP congestion avoidance is operating in the intervals [6,16] and [17,22]

j) threshold is 21, and congestion window size is 1.

1) What is the utilization on the institution's LAN?

2) What is the Utilization on the access link?

3) Roughly, what is the delay to satisfy a request?

4) What do you propose to lower the delay? Discuss your solution?

You might also like