1500 LPH - Ro
1500 LPH - Ro
Overall Pass 1
Raw water TDS mg/l 1,263.7 1,263.7
EC @25C / @25.00C uS 2,116.5 / 2,116.5 2,116.5 / 2,116.5
Feed Pressure bar 0.0 10.666
Temperature deg C 25.00
Total DP bar 0.154 0.154
Brine Pressure bar 10.512 10.512
Flow Allowance 3.00 yrs 0.848
SP % Increase (Max) 3.00 yrs 33.10%
Recovery % 50.00% 50.0%
Feed Flow m3/hr 3.000 3.000
Product Flow m3/hr 1.500 1.500
Average Flux l/m2/hr 30.93 30.93
Concentrate Flow m3/hr 1.500 1.500
Product TDS mg/l 4.960 4.960
Concentrate TDS mg/l 2,522 2,522
Primary HP Pump kW kilowatt 1.111 1.111
Power Consumption kWh/m^3 0.741 0.741
Ions Feed Net Feed Conc Product
Ca mg/l 176.2 176.2 351.7 0.635
Mg mg/l 34.97 34.97 69.89 0.0488
Na mg/l 178.8 178.8 356.9 0.788
K mg/l 0.0 0.0 0.0 0.0
Ba mg/l 0.0 0.0 0.0 0.0
Sr mg/l 0.0 0.0 0.0 0.0
NH4 mg/l 0.0 0.0 0.0 0.0
Fe mg/l 0.05 0.05 0.10 0.0
HCO3 mg/l 273.1 273.1 541.6 1.426
Cl mg/l 436.0 436.0 870.4 1.621
SO4 mg/l 126.0 126.0 251.8 0.166
NO3 mg/l 0.0 0.0 0.0 0.0
F mg/l 0.0 0.0 0.0 0.0
Br mg/l 0.0 0.0 0.0 0.0
B(Boron) mg/l 0.0 0.0 0.0 0.0
SiO2 mg/l 37.00 37.00 73.72 0.275
PO4 mg/l 0.0 0.0 0.0 0.0
CO3 mg/l 1.567 1.567 6.067 2.65E05
CO2 mg/l 5.799 5.799 6.798 6.092
TDS mg/l 1,264 1,264 2,522 4.960
EC @25C / @25.00C uS 2,116 / 2,116 2,116 / 2,116 3,884 / 3,884 10.3 / 10.3
pH pH 7.830 7.830 8.038 5.588
Osmotic Press (DS1 / Pitzer) bar 0.788 / 0.72 0.788 / 0.72 1.563 / 1.40 0.003 / 0.01
LSI / SDSI 0.95 / 1.01 0.95 / 1.01 1.65 / 1.69 5.77 / 5.88
CaSO4 / SrSO4 % % 4.5% / 0.0% 4.5% / 0.0% 12.4% / 0.0% 0.0% / 0.0%
BaSO4 / SiO2 % % 0.0% / 28.3% 0.0% / 28.3% 0.0% / 49.2%
Pitzer % Solubility Calcite/Dolomite 447% / 2,894% 447% / 2,894% 2,181% / 68,770%
Pitzer % Solubility CaSO4/SrSO4 5% / 0% 5% / 0% 13% / 0%
Chemicals 100%. Disclaimer: These estimated dose rates are provided as a courtesy to Toray DS2 users and are not guaranteed.
No Chemicals Added
Errors
Warnings
Cautions
Notices
1. Pass 1, Stage1, Module2 Brine to Permeate Ratio is below Lower Limit.Reference Value =4.000 , Actual =3.937
2. Pass 1, Stage1, Module3 Brine to Permeate Ratio is below Lower Limit.Reference Value =4.000 , Actual =3.139
3. Pass 1 Conc LSI =1.65 Warning High LSI. LSI > zero. Concentrate CaCO3 greater than saturation.Scale inhibitor required.
4. Pass 1 Conc Stiff Davis Index =1.69 Warning the Stiff Davis Index (SDSI) is greater than 0.Scale inhibitor required.
See https://rpicalc.ropur.com for detailed calculation
5. For small systems, design guidelines may be conservative. Use sound engineering judgment or contact local Toray salesperson for assistance.
Disclaimer : The program is intended to be used by persons having technical skill, at their own discretion and risk. The projections, obtained with the program, are the
expected system performance, based on the average, nominal elementperformance and are not automatically guaranteed.Toray shall not be liable for any error or
miscalculation in the program.The obtained results cannot be used to raise any claim for liability or warranty. It is the users responsibility to make provisions against fouling,
scaling and chemical attacks, to account for piping and valve pressure losses, feed pump suction pressure and permeate backpressure. For questions please contact us:
http://www.toraywater.com/
Flow Diagram:
Stream Details
Stream Number Flow Pressure TDS Est uS pH
20. Final Product 1.500 0.0 4.960 10.3 5.588
4. Feed Net 3.000 0.0 1,263.71 2,116.5 7.830
10. Feed to Pass 1 3.000 10.666 1,263.71 2,116.5 7.830
30. Conc to brine 1.500 10.512 2,522.17 3,884.5 8.038
Element Details in Pass 1