TECHNICAL

PROPOSAL

1
PROPOSED KEY
PERSSONNEL

2
Key Proposed Personnel
Title Position: Project Manager
1
Name: Dr. Buddhika Weerasinghe

Title Position: Construction Manager

2
Name: Mr. Chamara Herath

Title Position: Project Quantity Surveyor

3
Name: Mr. Achala Wijesinghe

Title Position: Project Safety Officer

4
Name: Mr. Yasiru Dasun

Title Position: Project Admin Officer

5
Name: Mr. Bathiya Bihan Raddella

3
Resume of Proposed Personnel
Position: Project Manager (Part-time)

Personal Name: Dr. Buddhika Weerasinghe Bate of Birth: 16/06/1986

Information Professional Qualification: PhD (Structural Engineering), BSc Engineering (Hons)

Name of Employer: University of Moratuwa

Address of Employer: Diyagama, Homagama

Current
Telephone: +94-717551672 Contact Person:
Position
Fax: Email: buddhikaw@uom.lk

Job Title: Senior Lecturer in Civil Engineering Years with Present Employer: 10 year

Past Experiences

From To Company/ Project/Position/Relevant Technical Management Experience

2022 Current Project Consultant – Asian Development Bank

2022 Current Project Consultant – Resource Development Consultants

2018 2022 Project Engineer – Project Consultancy Unit, Faculty of Architecture, UoM

2015 2018 Project Engineer – Construction of ITUM, University of Moratuwa

2011 Current Freelance Structural Design Engineer

- Please see more details on the CV-

4
 1. Proposed Position Consultant Civil/Structural Engineer
2. Name of Institute Institute of Technology, University of Moratuwa, Sri Lanka.
3. Name of Expert Dr. K.A. Buddhika Weerasinghe, PhD
4. Address 139/A/12, Ruwanpura, Palanwatta, Pannipitiya
Telephone No. +94 712255891
Home. +94 112782575
E-mail Address Private: buddhikacivil@gmail.com Office: buddhikaw@uom.lk

5. Date of Birth 16th June 1986

Citizenship Sri Lankan

• Doctor of Philosophy in Structural Engineering, University of Moratuwa, Sri Lanka

6. Education and Queensland University of Technology, Australia (2018-2022)

• Bachelor of Science in Civil Engineering (Minor in Structural Engineering),

(Second Class Upper with SGPA of 3.60), University of Moratuwa, Sri Lanka (2006-
2010)

7. Membership of • Associate Member - Institution of Engineers, Sri Lanka (IESL).

Professional • Associate Member - Institution of Civil Engineers, United Kingdom
Associations • Associate Member - Institution of Structural Engineers, Sri Lanka

• Certificate in Teaching in Higher Education, University of Colombo, Sri Lanka :Accredited

by CEDA (UK). (2014
• Computer Literacy
 AutoCAD/AutoCAD Civil 3D
 LiDAR
 GIS
 DJI Terra
8. Other Training  MS project/Primavera
 Microsoft Office
 Abaquas
 SAP 2000
 ANSYS
 SPSS

9. Countries of
Work Experience Sri Lanka
Language Speaking Reading Writing
10. Languages English Excellent Excellent Excellent
Sinhala Native
11. Employment Records
From 2021 To 2023
Employer Department of Civil Engineering, University of Moratuwa, Sri Lanka
Position held: Lecturer

Activities performed Conducting lectures and practical classes for BSc Engineering undergraduate students on
Engineering Surveying Related Subjects (Surveying/Remote Sensing and GIS)/Planning
and organizing of Survey Camps.
From January 2023 To Date
Employer Asian Development Bank(ADB)
Position held Project Engineering Consultant (Part-time) for the project of Science Technology Human
Resources Development Project under Ministry of Education.

Activities performed Planning and monitoring of project activities, conducting and participating progress
review meetings at site level and ADB officials, Quality inspection of construction
activities, reviewing of structural drawings, preparation of monthly and annual reports,
material approvals, solving disputes between client and contractor, preparing
construction related documents, overall monitoring of project progress.

From 2013 to 2021 and 2023 August – To date

Employer Division of Civil Engineering Technology, Institute of Technology, University of Moratuwa,
Sri Lanka
Position held Head of the Division and Senior Lecturer
Activities performed Conducting lectures and practical classes for National Diploma in Technology (NDT)
students on Engineering Surveying/Planning and organizing of Survey Camps

From 2020 to 2021

Employer Colombo Institute of Engineering Surveys (Pvt) Ltd
Project Climate Smart Irrigated Agriculture Project – Eastern Province funded by World Bank
Client Ministry of Irrigation
Position held Survey Consultant
Activities performed Monitoring of establishing control points, engineering survey of tanks (using drones, DGPS
and Total Stations), preparation of drawings for tanks in Ampara and Batticaloa districts.

From 2021 to 2022

Employer Colombo Institute of Engineering Surveys (Pvt) Ltd
Project Surveying and Levelling works for rehabilitation and /or restoration of village irrigation
schemes at Kilinochchi
District, Northern Province under Climate Smart Irrigated Agriculture Project – Eastern
Province funded by
World Bank
Client Ministry of Irrigation
Position held Survey Consultant
Activities performed Monitoring of establishing control points, engineering survey of tanks (using drones, DGPS
and Total Stations), preparation of drawings for tanks in Kilinochchi districts, Northern
Province, Sri Lanka.

From 2019 to 2021

Employer Colombo Institute of Engineering Surveys (Pvt) Ltd
Project Rehabilitation/Improvement of Roads under the implementation of 100,000 km alternative
road system under the government policy statement of” Vista of Prosperity and Splendor” in
Gampaha District
Client Road Development Authority (RDA)
Position held Survey Consultant
Activities performed Monitoring of establishing of control points, conduction of all the surveys related to
roads (Topo/LS and CS), preparing drawings and setting outs

From 2021 to 2022

Employer Colombo Institute of Engineering Surveys (Pvt) Ltd
Project Services for Mapping underground utility lines beneath the Re-gasified Liquefied Natural Gas
(R-LNG) pipeline Route from Kerawalapitiya to Kelanitissa power plant
 Client Ceylon Petroleum Cooperation (CPC)
Position held Survey Consultant
Activities performed Monitoring of GPR survey, 2D mapping and 3D mapping

From 2019 to 2021

Employer Hanco Construction (Pvt) Ltd
Project Rehabilitation/Improvement of Roads under the implementation of 100,000 km alternative
road system under the government policy statement of” Vista of Prosperity and Splendor” in
Jaffna District
Client Road Development Authority (RDA)
Position held Survey Consultant

Activities performed Monitoring of establishing control points, conduction of all the surveys related to
roads (Topo/LS and CS), preparing drawings and setting outs.

From 2015 to 2019

Employer Project Implementation Unit, Ministry of Higher Education and University of Moratuwa, Sri
Lanka
Relocation and Development of Institute of Technology, University of Moratuwa at
Project Diyagama, Homagama funded by World Bank and Government of Sri Lanka
Client Ministry of Higher Education
Position held Project Consultant Engineer (Civil)
Planning and monitoring of project activities, design of lab layouts, preparing of
Activities performed specifications for lab equipment, monitoring construction of laboratories, monitoring of
assembling and commissioning of lab
equipment, conducting progress review meetings, Inspection of construction
activities, checking interim payments to contractor, developing new rates for
variation activities, reviewing of structural drawings, preparation of monthly and
annual reports, material approvals

2017 To Date
From
Project Consultancy Unit, Faculty of Architecture, University of Moratuwa, Sri Lanka
Employer
Development of Mahinda Rajapakse International Stadium, Diyagama, Homagama funded
Project by the Government of Sri Lanka
Ministry of Sports and Youth Affairs
Client
Consultant Project Engineer
Position held
Planning and monitoring of project activities, conducting meetings with client and
contractor, Inspection of construction activities, checking and approving the bills,
Activities conducting rate committee meetings, material approvals, Preparing monthly and
performed annual reports

2022 June to Date

From
Resource Development Consultants (Ptv) Ltd (RDC)
Employer
Construction of new building complex for Faculty of Technology, University of
Sabaragamuwa Sri Lanka and
Project this project is funded by Asian Development Bank (ADB)
Sabaragamuwa University of Sri Lanka
Client
Laboratory Design Consultant
Position held
design of lab layouts, preparing of specifications for lab equipment, monitoring
construction of laboratories, monitoring of assembling and commissioning of lab
 Activities equipment, participating progress review meetings, working with RDC team to
performed prepare progress reports

2020 to date
From
1. Construction of new terminals for Bandaranayake International Airport,
Katunayeke funded by JAICA and main contractor is TAISEI Cooperation, Japan
(Hanco was a sub-contractor)
2. Rehabilitation of 60 kms in Jaffna District, Sri Lanka funded by the Government of
Project Sri Lanka
Taisei Construction Cooperation, Japan and Tokyo Cement Sri Lanka
Client
Hanco Constructions (Pvt) Ltd., Sri Lanka
Employer

Position held Consultant Project Manager

Managing and Guiding of all QS related works for Pre/Post Contract for construction
Activities projects and developing project plans, managing projects and progress monitoring,
performed monitoring of construction activities, design of structural elements, conducting
progress meetings, preparing progress reports

2021
From
Department of Civil Engineering, University of Moratuwa, Sri Lanka
Employer
Technical and feasibility evaluation Pre-cast Arch Bridge
Project
International Construction Consortium (Pvt) Ltd
Client
Team Member of Technical Evaluation Committee
Position held
Technical and feasibility evaluation Pre-cast Arch Bridge for Inter National Construction
Consortium, Report preparation, Monitoring of settlements and deformations using
Activities performed surveying equipment

2011 to 2013
From
Ranika International Private Limited, Moratuwa, Sri Lanka
Employer
Various Water Proofing Projects
Project
Varies
Client
Consultant Civil Engineer
Position held
Activities Planning and monitoring construction activities, Preparing progress reports,
performed Conducting progress meetings

From 2011 to Date

Employer Self employed
Position held Freelance Structural Design Engineer and Cost Estimater for low-rise buildings
Structural Design of Civil Engineering Structures constructed in various locations
Activities
of the country, Site visits to monitor the progress, Project planning, conducting
performed
progress meetings

From 2011 to Date

Employer Self employed
Position held Freelance Engineering Surveyor
 Activities Conducting various surveying activities such as boundary surveys, contouring etc.
performed

From 2008 - 2009

Employer Central Engineering Consultancy Bureau (CECB), Sri Lanka
Position held Trainee Engineer (Civil) on the Construction of 11-Storied Building for Ministry of Religious
Affairs.
Activities Planning and monitoring construction activities, checking and approval of bills,
performed Participating progress meetings, Preparing progress reports

12. RESEARCH EXPERIENCE

2018 – 2022
PhD Candidate, Structural Engineering Division
Department of Civil Engineering, University of Moratuwa, Sri Lanka.
Project: Experimental and Numerical Investigation of Bahaviour of Curved Circular Hollow Sections Strengthened
with Carbon Fibre
Reinforced Plymer
Supervisors: Dr. (Mrs). J.C.P.H. Gamage, Dr. Sabrina Fawsia and Prof. D.P. Thambiratnam

2011 - 2013
Research Assistant, Construction Management Division Department of Civil Engineering, University of Moratuwa.
Project: Impact of Foreign Contractors on the Development of Sri Lankan
Construction Industry Supervisors: Dr. L.L. Ekanayake and Prof. A.A.D.A.J.
Perera
2010
Research Student: Undergraduate Research
Department of Civil Engineering, University of Moratuwa.
Project: Superstitions in Building Construction and Their Engineering
Significance Supervisor: Prof: W.P.S. Dias

2014- 2021
Researcher, Institute of Technology, University of Moratuwa. Non-Funded research of the Academics.
Project: Level of Competitiveness of Sri Lankan Contractors in International Construction Industry Current Status:
Preparing Final Report and
Working on some Publications

13. RESEARCH INTERESTS

• Strengthening existing concrete structures using Fiber Reinforced Polymer
• Prediction of durability of concrete structures using non-destructive testing
• Controlling Cracks in thick concrete structure
• Construction Management & Law
• Finite Element Modeling of Masonry Structures
 14. TEACHING EXPERIENCE AT THE UNIVERSITY OF MORATUWA

2012 - Current
Surveying and Levelling DCE 207
Lecture in Charge: Conducting Lectures, Tutorial Classes, Practical Classes and Acting as the Officer In-charge for
Annual Two Weeks
Survey Camp for a Class of 80 Students

2013 - Current
Strength of Materials, DCE 102/DCE 206
Lecturer In Charge: Conducting Lectures, Tutorial Classes and Practical Classes (Finite Element Modeling using
ANSYS and StatPro) for a class of 350 students

2012 - 2013
Construction Management
Instructor: Conducting Practical Classes on MS Project for a class of 125 Students at the department of Civil
Engineering

2013-2014
Building Materials and Constructions
Visiting Lecturer: Conducting Lecturer for a Class of 60 Students at the Department of Town and Country Planning,
Faculty of Architecture, University of Moratuwa .

2013 - 2014
Design of Structures
Visiting Lecturer: Conducting Lecturer for a Class of 80 Students at the Department of Building Economics, Faculty of
Architecture, University of Moratuwa

ADDITIONAL TEACHING EXPERIENCES

2011 - Current
Construction Management, Construction of High Rise Buildings and Engineering Surveying Visiting Lecturer:
Conducting Lectures for HNDE Students at ICBT Campus, Bambalapitiya.

2013 -2015
Building Construction and Materials Visiting Lecturer: Conducting Lectures at College
of Engineering, Institution of Engineers Sri Lanka(IESL).

2012 - 2014
Construction Project Planning and Construction Technology Visiting Lecturer: Conducting Lectures
for a class of 30 students at Kotalawala Defence University (KDU), Ratmalana, Sri Lanka.

2014 -2015
Engineering Economics Visiting Lecturer: Conducting Lecture for a Class of 20 Students at Northshore Collage of
Business and Technology, Mattakkuliya, Sri Lanka.

2015- Current
Engineering Surveying
Visiting Lecturer: E Soft College of Engineering, Katubedda, Sri Lanka

2018- 2021
Construction Technology University of Vocational
Technology, Kandawala, Rathmalana, Sri Lanka.
 2014-Current
Short Courses on Engineering Surveying
Institute of Technology, University of Moratuwa
Visiting resource person at Kotmale Irrigation Training Institute, Kotmale Visiting resource person at Irrigation Training
Institute, Galgamuwa

2024 – Current
Engineering Mechanics
Visiting Lecturer: National School of Business Management (NSBM), Pitipana, Homagama, Sri Lanka

2022 – 2023
Engineering Surveying
Visiting Lecturer: CINEC Campus, Malabe, Sri Lanka.

15. PROJECTS SUPERVISED

2020
Individual Research Projects
Supervised individual research project of B. Eng. students at Cinec Campus, Kaduwela, Sri Lanka. These projects are
related to the fields of construction management and wind engineering.

2020
Individual Research Projects
Supervised individual research project of B. Eng. students at E Soft College of Engineering, Katubedda, Sri Lanka. This
involved with supervision of 10 students on their research under different aspects like structural engineering, building
materials and construction management.

2017
Design of 20 Storied Hotel Building at Moratuwa Municipal Council Area
Final year undergraduate group project for students at Northshore College (University of West England), Mattakkuliya,
Sri Lanka. This involved finite element analysis and design of structural elements, feasibility studies and all the other
aspects in a building construction project.
2017
Design of Indoor Stadium including a Pavilion for Institute of Technology, University of Moratuwa
Final year undergraduate individual design project for students at Northshore College (University of West England),
Mattakkuliya, Sri Lanka. This involved finite element analysis and design of steel structural elements, feasibility studies
and all the other aspects in a building construction project.

2017, Co-Supervisor
Customs and Beliefs in Building Construction and Their Engineering Significance
Undergraduate research project for student at Northshore College (University of West England), Mattakkuliya, Sri
Lanka.
16. ADMINISTRATIVE EXPERIENCE
2015 - 2020
Vice President - Institute of Technology, University of Moratuwa, Association of Teachers (ITUMAT)

2013 - 2015
Student Councillor - Division of Civil Engineering Technology, Institute of Technology, University of Moratuwa. 2014-
2017
17. PUBLICATIONS

Book Publications

• Manujith Sagara Chandra, Kasun Nandapala, Buddhika Weerasinghe: Vaasthu, Feng-Shui, Traditional Beliefs Vs
Civil Engineering. 01/2018; LAMBERT Academic Publishing., ISBN: 978-620-2-05837-7

Publications in refereed Journals

• K. A. B. Weerasinghe, J. C. P. H. Gamage, S. Fawzia, and D. P. Thambiratnam, “Experimental investigation on

flexural behaviour of
vertically-curved circular-hollow steel sections strengthened with externally bonded carbon fibre reinforced polymer,”
Eng. Struct., vol. 236, no. January, p. 112040, 2021.

• K. A. B. Weerasinghe, J. C. P. H. Gamage, D. P. Thambiratnam, and S. Fawzia, “Bond Characteristics of CFRP

Strengthened In-Plane Curved Steel Beams with Circular Hollow Cross Section Subjected to Flexure,” Com. Struct.
(Under review)

• K. A. B. Weerasinghe, J. C. P. H. Gamage, D. P. Thambiratnam, and S. Fawzia, “Experimental investigation of the

behavior of CFRP strengthened horizontally curved steel I-beams,” Eng. Struct. (Under review)

• Chandra, M.S., Nandapala, K., Weerasinghe, K.A.B. et al. An engineering approach towards the traditional beliefs
in house construction. Asian J Civ. Eng. 21, 367–380 (2020). https://doi.org/10.1007/s42107-01900215- 0

• Weerasuriya A.U., Weerasinghe K.A.B., (2017) Growing Colombo: Some Concerns from Wind Engineering Point
of View, Transactions – 2017, The Institution of Engineers, Sri Lanka, Vol 1 – Part B, pp 81-88.

• Weerasuriya A.U., Weerasinghe K.A.B., Ishani Dias., (2018) Road Vehicle Instabilities in High Winds in Sri Lanka,
Transactions – 2018, The Institution of Engineers, Sri Lanka.

• Weerasuriya A. U., Weerasinghe K. A. B., Tse K. T., Chun-Ho Liu, (2020), Do Chemical Reactions Matter in
Modelling Near-Field Air Pollution Dispersion? A CFD Study, Transactions – 2020, The Institution of Engineers, Sri
Lanka (Full Paper is Accepted).

Publications in refereed Conferences

• Sjinthan R., Weerasinghe K.A.B, Gamage J.C.P.H., (2020), Experimental investigation on torsional behaviour of
carbon fibre reinforced polymer strengthened concrete beams curved in horizontal plane, Annual Sessions, Society
of Structural Engineers, Sri Lanaka.
• Madujith Sagara, Weerasinghe K.A.B., Kasun Nandapala (2017), Impact of Aligning Three or More Openings in a
Dwelling, An Engineering Perception Using Fluid Dynamic, Kotalawala Defence University International Research
Symposium (KDUIRC 2017).

• Madujith Sagara, Weerasinghe K.A.B., Kasun Nandapala (2017), Contemporary and Comparative Study on
Customs and Beliefs in Building Construction, Proceedings - International Conference on Multi Disciplinary
Approaches, Faculty of Graduate Studies, University of Sri Jayawardanapura, Sri Lanka

• Weerasinghe K.A.B, L.L. Ekanayake, (2014), Factors influencing the development of Sri Lanka construction
industry: Local contractors perspective, International Symposium onAdvances in Civil and Environmental
Engineering practices, for Sustainable Development(ACEPS), Faculty of Engineering, University of Ruhuna, Galle,
Sri Lanka.

• Ekanayake L.L, Weerasinghe K.A.B, (2012), Developing Sri Lankan construction industry: Enablers and Barriers,
International Symposium on Advances in Civil and Environmental Engineering practices, for Sustainable
Development(ACEPS), Faculty of Engineering, University of Ruhuna, Galle, Sri Lanka.

• De Silva P.C.P, Bandara R.M.P.N.S , Weearasinghe K.A.B, (2012), An Equation to Estimate the Demand for Intra-
City Travel: A case Study in Moratuwa City Area, The Multi-Faceted Nature of Research in 21st Century,
Multidisciplinary Symposium of the Faculty of Graduate Studies, University of Kelaniya, Kelaniya, Sri Lanka.

Publications in non-refereed conferences

• Weerasinghe K.A.B. (2017), Factors Influencing the Development of Local Contractors in Sri Lankan Construction
Industry, Proceedings - Annual Research Symposium of Institute of Technology, University of Moratuwa, Sri Lanka

18. REFERENCES

- Prof. S.A.M. Nanayakkara, Senior Professor, Department of Civil Engineering, University of Moratuwa.

Tel: +94-7792099975 E-mail: saman@uom.lk

- Prof. Jagath Manathunga, Professor, Department of Civil Engineering, University of Moratuwa.

Tel: +94-718045546 E-mail. manathunge@uom.lk

19. DECLARATION

I confirm that the information provided is accurate.

Signature: Date: 25/04/2024

Position: Construction Manager (Full-time)

Name: Mr. Chamara Herath Bate of Birth: 24/01/1995

Personal
Information
Professional Qualification: BSc Engineering (Hons)

Name of Employer: Hanco Construction (PVT) Ltd

Address of Employer: Havelock Road, Colombo 06.

Current
Telephone: +94713283725 Contact Person:
Position
Fax: Email: chamara.hms95@gmail.com

Job Title: Project Engineer Years with Present Employer: 3 years

Past Experiences

From To Company/ Project/Position/Relevant Technical Management Experience

2021 Current Hanco construction (PVT) Ltd – Project Engineer

2019 2021 Lotus Construction (PVT) Ltd – Site Engineer

2017 2018 Sanken Construction (PVT) Ltd – Trainee Engineer

2017 2018 ELS Construction (PVT) Ltd – Trainee Engineer

- Please see more details on the CV -

5
6
7
8
Position: Project Quantity Surveyor (Full-time)

Name: Mr. Achala Wijesinghe Bate of Birth: 03/01/1992

Personal
Information Professional Qualification: Diploma in Quantity surveying (NVQ level 5) at Advanced
Construction Training Academy (ACTA)
Name of Employer: Hanco Construction (PVT) Ltd

Address of Employer: Havelock Road, Colombo 06.

Current
Telephone: +94 77 670 92 92 Contact Person:
Position
Fax: Email: wijesinghe.achala4@gmail.com

Job Title: Quantity Surveyor Years with Present Employer: 8 years

Past Experiences

From To Company/ Project/Position/Relevant Technical Management Experience

2016 Current Hanco Constructions (PVT) Ltd – Quantity Surveyor

2015 2016 RH Holdings (PVT) Ltd – Quantity Surveyor

2013 2014 Consulting Engineers & Contractors (PVT) Ltd (CEC) – Assistant QS

04/2013 10/2013 Sumanasekara Construction (PVT) Ltd – Site Quantity Surveyor

10/2012 04/2013 Sumanasekara Construction (PVT) Ltd - Trainee Quantity Surveyor

- Please see more details on the CV -

9
10
11
12
13
Position: Project Safety Officer (Full-time)

Name: Mr. Yasuru Dasun Bate of Birth: 10/28/1999

Personal Professional Qualification: National Diploma in Technology (University of Moratuwa),
Information Successfully completed Managing Safety safetek global(iosh)/ Completed the Trade Test as a
Safety Officer (Construction Site) – (Certificate level - NVQ LEVEL 3)/ Successfully completed
OSHAS scaffolding certificate and training
Name of Employer: Yugadanawi Power Plant (Training Safety Officer)

Address of Employer: Norochcholei

Current
Telephone: +94 784875249 Contact Person:
Position
Fax: Email: yasuru.dasun12@gmail.com

Job Title: Training Safety Officer Years with Present Employer: 6 months

Past Experiences

From To Company/ Project/Position/Relevant Technical Management Experience

2019 2021 China Harbour Engineering Company Ltd - HSE Safety officer
Tokyo Super mix (Pvt) Ltd, Bandaranayake International Airport expansion
2020 2022
Project – Safety Officer
2020 2022 Hazama Ando Corporation – Safety Officer (Part-time)

01/2019 12/2019 China State Engineering Cooperation – Safety Officer

- Please see more details on the CV -

14
15
16
17
Position: Managing Director Cum Project Admin Officer (Full-time)

Personal Name: Mr. Bihan Bathiya Raddella Bate of Birth: 13/05/1990

Information Professional Qualification: BBA (SHU) UK (2013 - 2015)

Name of Employer: Buildwick Construction (Pvt) Ltd

Address of Employer: Pannipitiya

Current
Telephone: +94 77 604 4000 Contact Person:
Position
Fax: Email: bihanraddella@gmail.com

Job Title: Managing Director Years with Present Employer:

Past Experiences

From To Company/ Project/Position/Relevant Technical Management Experience

2010 2013 Hanco Construction (PVT) Ltd - Site Coordinator

2013 2021 Hanco Construction (PVT) Ltd - Manager Procurement

- Please see more details on the CV -

18
19
EQUIPMENT
SCHEDULE

20
List of Equipment

NO SERIAL NO MACHINE NAME MODEL NO

1 WIRE1.044 1.044 WIRE 30M

2 ACTBTLE ACETYLENE BOTTLE 1

3 AJAK ACROW JACK 482

4 ACMP0001 AIR COMPRESSURE-AIRMAN 1

5 ACMPPTB0001 AIR COMPRESSURE-PORTABLE 1

6 AWELPLNT0001 AIR COOLER WELDING PLANT 1

7 AHS20MM AIR HOSE 20mm 10M

8 ABXBR5FT ALUMINIUM BOX BAR 2" X 1" X 5' 5

9 ANG0023 ANGLE GRINDER-4'' BOSH GWS900-100 GWS900-100 1

10 ANG0026 ANGLE GRINDER-4'' BOSH GWS900-100 GWS900-100 1
11 ANGJAK ANGLE JACK 135

12 BHMR2LB BALL HAMMER 2LB 1

13 BBNDR0009 BAR BENDER MACHINE 32MM JAPAN 1

14 BCTR0004 BAR CUTTER MACHINE 32MM 1

15 BEMSCRD BEAM SCREED MACHINE 1

16 BVICE6IN BENCH VICE 6" 1

17 BVICE6IN BENCH VICE 6" (CAST IRON) 1

18 BOGUN BLOW OUT GUN HILTI 2

19 BXSKT32 BOX SOCKET - 32 1

20 BXSKT9 BOX SOCKET - 9 1

21 BXSKTHDLE BOX SOCKET HANDLE 1

22 BXSKTRCHT BOX SOCKET RACHATE 1

23 BXSKT12 BOX SOCKET-12 3

24 BXSKT13 BOX SOCKET-13 1

21
25 BXSKT15 BOX SOCKET-15 1

26 BXSKT16 BOX SOCKET-16 1

27 BXSKT19 BOX SOCKET-19 1

28 BXSKT20 BOX SOCKET-20 1

29 BXSKT21 BOX SOCKET-21 1

30 BXSKT22 BOX SOCKET-22 1

31 BXSKT24 BOX SOCKET-24 1

32 BXSKT25 BOX SOCKET-25 1

33 BXSKT26 BOX SOCKET-26 1

34 BXSKT27 BOX SOCKET-27 4

35 BXSKT29 BOX SOCKET-29 1

36 BXSKT30 BOX SOCKET-30 1

37 BXSKT8 BOX SOCKET-8 1

38 BKRM0004 BRAKER HAMMER MACHINE T 700 HILTI 1

39 BKRM0003 BRAKER HAMMER MACHINE T 800 HILTI 1
40 BRCCTR1 BRC CUTTER-1' 1

41 BRKRCHSLFLT BREAKER CHISEL - FLAT 1

42 BRKRCHSLPOINT BREAKER CHISEL - POINTED 1

43 BLDCLP13MM BULLDOG CLIP-13MM 84

44 CSTRWHEL6 CASTER WHEEL-6'' 2

45 CSTRWHEL8 CASTER WHEEL-8'' 3

46 CWAKP10 CAT WALK PLATE-10' 9

47 CWAKP13 CAT WALK PLATE-13' 37

48 CWAKP6 CAT WALK PLATE-6' 26

49 CWAKP5FT CATWALK PLATE 5' 50

22
50 CCLMP6 C-CLAMP 6" 1

51 CHNHST4T CHAIN HOIST-4TON 1

52 CHRPLSARM CHAIR PLASTIC ARM 5

53 CHRPLSWARM CHAIR PLASTIC WITH OUT ARM 5

54 CAGUN CHEMICAL ANCHORING GUN HILTI - HIT-CB-330 3

55 CPNHMRL CHIPPING HAMMER LARGE 1

56 CPNHMRM CHIPPING HAMMER MEDIUM 1

57 CHSLFLT CHISEL FLAT 5

58 CHSLPOINT CHISEL POINT 2

59 COMBPLIR COMBINATION PLIER 1

60 COMPHSE32MM COMPRESSURE HOSE 32MM 1

61 COMPHSE32MM COMPRESSURE HOSE 32MM - 5M 1

62 CONBUKT CONCRETE BUCKET 2

63 CONMXR0002 CONCRETE MIXER MACHINE ROBIN 1

64 CONMXR0001 CONCRETE MIXTURE VIBROMIX 1
65 CONMXR0004 CONCRETE MIXTURE VIBROMIX 1
66 CONTOF0001 CONTAINER BOX 20FT - OFFICE 1

67 CONTST0001 CONTAINER BOX 20FT - STORES 1

68 CRSBR CROSS BAR 400

69 CRWBR6 CROW BAR 6' 2

70 CRWBR5 CROW BAR 5' 1

71 CUTOFM0003 CUT OFF MACHINE BOSH GCO 200 1

72 CUTOFM0001 CUT OFF MACHINE Makita 1

73 DSKL1X2T D - SHUKLE 1 X 2T 1

74 DSKL1.5X2T D - SHUKLE 1.5 X 5T 1

75 DSKL2.5X12T D - SHUKLE 2.5 X 12T 7

76 DINTBLFOM DINING TABLE - FOMICA 1

77 DINTBLPLS DINING TABLE - PLASTIC 1

23
78 DDVRLR0001 DOUBLE DRUM VIBRATOR ROLLER-2TON 1

79 DRLMRFWD0001 DRILL MACHINE REVERS FORWARD BOSCH 1

80 BLWRS0001 ELECTRIC BLOWER- DONCHENG Doncheng - QIF - 1

FF28
81 ELCPWP0004 ELECTRIC PORTABLE WELDING PLANT 1

82 ELCSLDP0001 ELECTRIC SLEDGE WATER PUMP 4" 1

83 EWP1IN/0001 ELECTRIC WATER PUMP 1" 1

84 EWPC2In ENGINE WATER PUMP CONNECTOR 2" 1

85 EDWP0003 ENGINEE DRIVEN WATER PUMP 2" 1

86 EDWP0002 ENGING DRIVEN WATER PUMP-2'' 1

87 FREEXTCRBN2KG FIRE EXTINGUISHER - CARBON DIOXIDE - 2KG 1

88 FREEXTCRBN3KG FIRE EXTINGUISHER - CARBON DIOXIDE - 3KG 6

89 FREEXTDRYCEM6K FIRE EXTINGUISHER DRY CHEMICAL POWDER - 4

6KG
90 FREEXTFOM9L FIRE EXTINGUISHER FOAM - 9L 1

91 FREEXTWTR9L FIRE EXTINGUISHER WATER - 9L 1

92 FLEXDUCTHSE300 M FLEXIBLE DUCT HOSE 300MM - 10M VITARA 2

93 FLXGRNHSE90MM FLEXIBLE GREEN HOSE-90MM 30M

94 FRMTSPNR FORM TIE SPANER 2

95 FRMT FORM TIE 1500

96 GCTRHS GAS CUTTER HOSE (DOUBLE HOSE) 30M

97 LPG12.5 GAS CYLINDER-12.5KG 1

98 LPG5 GAS CYLINDER-5KG 1

99 GREGULTR GAS REGULATOR 3

100 GASREGHSE1.5M GAS REGULATOR HOSE 1.5M 3

101 GCLMP10 G-CLAMP 10" 13

102 GEN0002 GENERATOR 25KV AIRMAN SDG25 1

103 GEN0001 GENERATOR -KV6.5 HONDA 1

24
104 GIBUKT GI BUCKET 1

105 GIP00-01 GI PIPE 00 - 01M 500

106 GIP01-02 GI PIPE 01 - 02M 750

107 GIP02-03 GI PIPE 02 - 03M 300

108 GIP03-04 GI PIPE 03 - 04M 500

109 GIP04-05 GI PIPE 04 - 05M 400

110 GIP05-06 GI PIPE 05 - 06M 350

111 GIROFSHT8 GI ROOFING SHEET-8' 93

112 GGHP GREASE GUN HAND PUMP 2

113 GGT0001 GREASE GUN TROLLEY 1

114 HKSWFRME HACKSAW FRAME 3

115 HLFT1000W HALOGEN LIGHT FITTING 1000W 4

116 HLFT1500W HALOGEN LIGHT FITTING 1500W 6

117 HLFT500W HALOGEN LIGHT FITTING 500 W 1

118 HNDSHLD HAND SHEALED 1

119 HLMTBLUE HELMET BLUE 10

120 HLMTRED HELMET RED 5

121 HLMTWHTE HELMET WHITE 5

122 HPWG0001 HIGHPRESSURE WATER GUN WIPRO - APW - 1

120CP
123 JNTPN JOINT PIN 400

124 KEY16 KEY - 16 1

125 KEY18 KEY - 18 1

126 KEY21/23 KEY - 21 - 23 1

127 KEY30/32 KEY - 30 - 32 1

128 KEY22/23 KEY 22 - 20 1

25
129 KEY10 KEY-10 1

130 KEY13 KEY-13 1

131 KEY17 KEY-17 1

132 KEY19 KEY-19 7

133 KEY20 KEY-20 2

134 KEY21 KEY-21 6

135 KEY21/23 KEY-21-23 1

136 KEY22 KEY-22 3

137 KEY23 KEY-23 1

138 KEY24 KEY-24 5

139 KEY30 KEY-30 2

140 KEY32 KEY-32 1

141 KEY36 KEY-36 1

142 KEY6 KEY-6 1

143 KEY9 KEY-9 1

144 LAP0001 LAPTOP DELL I5 DELL i5 (N Series) 1

145 LPRNT001 LASER PRINTER HP LASER JER P1102 1
146 LFTBLT5T LIFTING BELT 5TON 3

147 MASNTRWL6 MASON TROWEL 6" 2

148 MASNTRWL8 MASON TROWEL 8" 3

149 DMATRS MATTRESS (DOUBLE) 1

150 SMATRS MATTRESS (SINGLE) 8

151 MSNTRWL MESON TROWEL 4

152 MHLMPFT1000W METAL HALIDE LAMP FITTING 1000W 2

153 MHLMPFT400W METAL HALIDE LAMP FITTING 400W 4

26
154 MINI PRISEM ROD 1

155 MOTRPANGI MOTAR PAN GI 3

156 NALHMR NAIL HAMMER 10

157 OFCHR0006 OFFICE CHAIR (ROTATABLE) 2

158 OFTBL0008 OFFICE TABLE STEEL (1.8x4ft) 1

159 OFTBL0005 OFFICE TABLE STEEL (2x4ft) 1

160 OFTBL0006 OFFICE TABLE STEEL (2x4ft) 1

161 OXNBTL OXYGEN BOTTLE 1

162 OXGREG OXYGEN REGULATOR 2

163 P - CONE 175

164 PB3P0002 PANNEL BOARD 3P 1

165 PDSFN0003 PEDESTAL FAN 1

166 PDSFN0001 PEDESTAL FAN 1

167 PERLING-200MM X 75MM X 7M 19

168 PAXE PICKAXES 6

169 GIPCF PIPE CLAMP - FIXED 1000

170 GIPCR PIPE CLAMP - ROATATED 1200

171 PIPEWRNCH14IN PIPE WRINCH-14'' 2

172 PLTCMP0001 PLATE COMPACTOR - 3HSP SAKAI 1

173 PKRC36MM POKER CABLE-36MM 4

174 PKRC46MM POKER CABLE-46MM 1

175 PKRM0001 POKER MACHINE 1

176 PKRM0003 POKER MACHINE 1

177 PPV0001 PORTABLE PROPELLER VENTILATOR 300MM VITARA - SHT - 30 1

178 PPV0002 PORTABLE PROPELLER VENTILATOR 300MM VITARA - SHT - 30 1
179 PWRSW0007 POWER SAW 7.5IN BOSCH BOSCH GKS 700 1
180 PWRSW0005 POWER SAW 7.5IN WIPRO WIPRO - W9185A 1

27
181 PWRSAW0020 POWER SAW 1

182 PWRTWLM POWER TROWEL MACHINE ROBIN 2

183 PRSM PRISEM 1

184 PRSMROD PRISEM ROD 1

185 RCHT19/21 RACHATE-19/21 1

186 RCHT21/24 RACHATE-21/24 1

187 REF0001 REFRIGRATOR (Single Door) 1

188 RHDRL0001 ROTARY HAMMER DRILL -DONGCHENG 1

189 RBRHMR2IN RUBBER HAMMER 50MM 6

190 RH20MM RUBBER HOSE PVC 20MM - 10M 3

191 RH20MM RUBBER HOSE PVC 20MM - 8M 1

192 RH25MM RUBBER HOSE PVC 25MM - 25M 1

193 RH32MM RUBBER HOSE PVC 32MM - 10M 1

194 RH32MM RUBBER HOSE PVC 32MM - 15M 1

195 RH32MM RUBBER HOSE PVC 32MM - 20M 1

196 RH32MM RUBBER HOSE PVC 32MM - 25M 1

197 RH32MM RUBBER HOSE PVC 32MM - 5M 1

198 RTNT RUBBER TENT-10m x 6m 2

199 SFTJCKT SAFETY JACKET 63

200 SCFF5.5X3 SCAFFOLDING FRAME 5.5X3ft 40

201 SCFF5.5X2.5 SCAFFOLDING FRAME-5.5''X2.5'' 100

202 SCFF5.5X4 SCAFFOLDING FRAME-5.5''X4'' 200

203 SCFFLDR SCAFFOLDING LADDER 15

204 SC10KG/0001 SCALE 10KG 1

205 SCN0001 SCANNER CANON 1

28
206 SCREWDRVEFLT12 SCREW DRIVER FLAT-12'' 1

207 SCREWDRVEFLT15 SCREW DRIVER FLAT-15'' 1

208 SCREWDRVEFLT16 SCREW DRIVER FLAT-16'' 1

209 SCREWDRVEPHLP1 SCREW DRIVER PHILLIPS-15'' 1

210 SHOVEL 8

211 SGUN SILICONE GUN 3

212 SINGLE PRISEM 1

213 SLDHMR14LB SLEDGEHAMMER 14LB 2

214 SLDHMR2LB SLEDGEHAMMER 2LB 1

215 SLDHMR3LB SLEDGEHAMMER 3LB 1

216 SLDHMR4LB SLEDGEHAMMER 4LB 1

217 SLDHMR6LB SLEDGEHAMMER 6LB 2

218 SLDHMR8LB SLEDGEHAMMER 8LB 1

219 SPNER12 SPANNER-12'' 1

220 SPNER15 SPANNER-15'' 1

221 SLVL225MM SPRIT LEVEL 225MM 1

222 SLVL300MM SPRIT LEVEL 300MM 3

223 SLVL450MM SPRIT LEVEL 450MM 1

224 SSBED STEEL BED (SINGLE) 12

225 STELCLMNBX STEEL COLLUMN BOX (9"X6') 20

226 STEEL COLUMN BOX-300MM X 300MM X 4F 1

227 STEEL COLUMN BOX-450MM X 450MM X 4F 1

228 SCUB0001 STEEL CUPBOARD (6X3ft) 1

229 SFRAK0001 STEEL FILE RACK (2.5x4ft) 1

230 STEEL HINGES 2"X4" 1

29
231 STEEL HINGES 3"X3" 1

232 STEEL TAPE 30M 3

233 SWP2/0002 SUBMERSIBLE WATER PUMP 2" 1

234 SWP2/0003 SUBMERSIBLE WATER PUMP 2" 1

235 SWP4/0002 SUBMERSIBLE WATER PUMP 4" 1

236 TJAK T - JACK 350

237 TL0001 TL MACHINE 1

238 TPD0002 TRY POD SOKKIA 1

239 TSQR TRY SQURE 1

240 TRNBKL200MM TURN BUCKLE 200MM 1

241 TRNBKL300MM TURN BUCKLE-300MM 17

242 TRNBKL450MM TURN BUCKLE-450MM 6

243 TRNBKL550MM TURN BUCKLE-550MM 2

244 UJAK U JACK 400

245 VCC0001 VACCUM CLEANER 1400W ELECTROLUX - 285 1

246 VCC0002 VACCUM CLEANER 1400W ELYSSION - EL2018- 1
A
247 WCKM0001 WACKER MACHINE- SAKAI RS75 1
248 WTRTNK1000L WATER TANK PLASTIC -1000L 1

249 WTRTNK2000L WATER TANK-2000L 2

250 WGEN0001 WELDING GENERATOR 170A DENYO 1

251 WHLBARW WHEEL BARROW 4

30
Details of Main Equipment
Item of Equipment: Double drum vibrating roller (1 ton)

Name of the Manufacturer Model and Power Rating

Sakia
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Poker Vibrator

Name of the Manufacturer Model and Power Rating

Robin
Equipment Information
Capacity Year of Manufacture
2”

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

31
Item of Equipment: Electric Poker Vibrator

Name of the Manufacturer Model and Power Rating

Dongcheng
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Bar Bending Machine

Name of the Manufacturer Model and Power Rating

Locally Manufactured
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

32
Item of Equipment: Demolition Hammer

Name of the Manufacturer Model and Power Rating

Bosch
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Rotary Hammer

Name of the Manufacturer Model and Power Rating

Bosch
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

33
Item of Equipment: Angle Grinders

Name of the Manufacturer Model and Power Rating

Stanley
Equipment Information
Capacity Year of Manufacture
4” and 7”

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Chop Saw

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

34
Item of Equipment: Power Saw

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Jig Saw

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

35
Item of Equipment: Portable Welding Plant

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Submersible Pumps

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture
2” and 3”

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

36
Item of Equipment: Vacker

Name of the Manufacturer Model and Power Rating

Sakai
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Plate Vibrator

Name of the Manufacturer Model and Power Rating

Sakai
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

37
Item of Equipment: High Pressure Water Gun

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Blower

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

38
Item of Equipment: Vacuum

Name of the Manufacturer Model and Power Rating

Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

Item of Equipment: Laser Level

Name of the Manufacturer Model and Power Rating

Sokkia
Equipment Information
Capacity Year of Manufacture

Current Status

Current Location

Source
(Owned/Rented/Leased/Specially
Manufactured)

39
 SITE
ORGANIZATION

40
 Project Manager (Part-
time))
Construction Manager
/Resident Engineer (Full-
time)

41
Technical Officer (Full- Quantity Surveyor (Full- Safety Officer (Full-time) Admin Officer (Full-time)
time) time)
Supervisor (Full-time) Store Keeper (Full-time)
 METHOD
STATEMENTS

42
Construction Methodology in Brief

43
44
Sub-Structure
1. Columns will be casted using either ready mix or in-situ mix concrete depending on the
quantity requirements. Form work for the columns will be prepared in one go and avoid
any ugly joints to the structure. Column formwork will be prepared using 50 mm × 100
mm class II timber together with 15 mm thick plywood sheets.

45
46
External architectural elements, roads, landscaping and fencing will be done at the last
couple of months of the project.

47
48
MASTER LIST OF
APPROVED
SUPPLIERS –
MATERIALS

49
50
MOBILIZATION
SCHEDULE

51
52
CONSTRUCTION
SCHEDULE

53
54
55
 BIDDERS
QUALIFICATIONS

56
Business Registration

57
Form 1

58
59
60
61
Non Vat Letter

62
 OTHER
COMPLETED
PROJECTS

63