Round 330 MM TC
Round 330 MM TC
T R CHEMICAL ANALYSIS -
TEST METHOD: [O E S~ ASTM E 415-2021 & JIS G-1253/2013]
Customer’s Code Marking | % % % % % % % %
gid [¢ S P Ni Cr Mo v Cu
330mm Round Bar M1 0.195 0.038 [ 0.035 | 0236 | 0.162 | 0.060 | <0.001 | 0.131
i
AL It 1
280mm Round Bar R1 0.195 [ 069 [ 0.266 | 0.037 | 0.036 | 0.237 | 0.162 | 0.060 | <0.001 | 0.131
T | i | )
Specified : IS: 21 2011 0.22 0.045 | 0.045 | - - - - -
Grade E 250, Quality BR max | max | max | max | max
Remarks: Samples meet the above specified chemical & mechanical requirements.
Test(s) Witnessed by: Not witnessed.
(B.MISHRA)
TQF 041 Manager-Laboratory
1) This TestReport refers to the values obtai e time oftesting& resiiis relate to the ftem tesicd
2) This Report shall not be reproduced in part or full without written permissiori of the management,
3) All tests are performed as per specification / reference books
4) Samples are drawn by the customer/ TPI & not by us, unless otherwise specified.
5) Laboratory is not responsible for information provided by the customer incorporated in the Test Report
6) This Test Report is non-negotiable
7) Any discrepancy in this Test Report should be brought to “notice within 13 days from the date of issuance”
TRERTE
TESTING RESEARCH ENGINEERING AND TECHNOLOGICAL SERVICES
14, RAMANATH PAL ROAD, KIDDERPORE, KOLKATA - 700 023 .
TEL : 2459-4142/2459-6344, FAX : 2459-5818, E-mail : treats_kolkata@yahoo.com / treats @treats.co.in, Web : treals.co.in
(Government Registered)
Location of Testing : At our Laboratory Environmental Conditions: Temp. 30°C / 58% R.H.
CHEMICAL ANALYSIS
TEST METHOD: [O E S - ASTM E 415 — 2021 & JIS G-1253/2013]
SI. Customer’s Code Marking %
No. CE#
1. 330mm Round Bar Mi 0.381
Remarks: Samples meet the above specified chemical & mechanical requirements.
(B.MISHRA)
Manager-Laboratory
Disclaimer : 1) This Test Report refers to the values obtained at the time of testing & results relate to the ftem tested.
2) This Report shall not be reproduced in part or full without written permission of the management.
3) Al tests are performed as per specification / reference books.
4) Samples are drawn by the customer/ TPI & not by us, unless otherwise specified.
) Laboratory is not responsible for information provided by the customer incorporated in the Test Report
6) This Test Report s non-negotiable
7) Any discrepancy in this Test Report should be brought to “notice within 15 days from the date of issuance”.