LM101A-LM201A

LM301A

SINGLE OPERATIONAL AMPLIFIERS

LM101A LM301A
LM201A
■ INPUT OFFSET VOLTAGE 0.7mV 2mV
■ INPUT BIAS CURRENT 25nA 70nA
■ INPUT OFFSET CURRENT 1.5nA 2nA
N
■ SLEW RATE AS INVERSING10V/µs 10V/µs DIP8
AMPLIFIER (Plastic Package)

DESCRIPTION

The LM101A is a general purpose operational am-

plifier which offers many features: supply voltages
from ±5V to ±22V, low current drain, overload pro- D
tection on the input and output, no latch-up when SO8
the common-mode range is exceeded, free from (Plastic Micropackage)
oscillations and compensation with a single 30pF
capacitor. It has advantages over internally com-
pensated amplifiers in that the compensation can PIN CONNECTIONS (top view)
be tailored to the particular application: slew rate
of 10V/µs and bandwidth of 3.5MHz can be easily
achieved. 1 8
ORDER CODE 2 7
Package 3 6
Part Number Temperature Range
N D
4 5
LM101A -55°C, +125°C • •
LM201A -40°C, +105°C • •
LM301A 0°C, +70°C • • 1- Balance, compensation 5 - Balance
Example : LM201AN 2- Inverting input 6 - Output
3- Non-inverting input 7 - VCC+
N = Dual in Line Package (DIP) 4- VCC- 8 - Compensation 2
D = Small Outline Package (SO) - also available in Tape & Reel (DT)

December 2001 1/11

LM101A - LM201A - LM301A

SCHEMATIC DIAGRAM

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter LM101A LM201A LM301A Unit
VCC Supply voltage ±22 V
Vi Input Voltage ±15 V
Vid Differential Input Voltage ±30 V

Ptot Power Dissipation N Suffix 500

mW
D Suffix 300
Output Short-circuit Duration Infinite
Toper Opearting Free-air Temperature Range -55 to +125 -40 to +105 0 to +70 °C
Tstg Storage Temperature Range -65 to +150 °C

2/11
 LM101A - LM201A - LM301A

ELECTRICAL CHARACTERISTICS
±5V ≤ VCC ≤ ±20V, C1 = 30pF, Tamb = 25°C (unless otherwise specified)
LM101A - LM201A LM301A
Symbol Parameter Unit
Min. Typ. Max. Min. Typ. Max.
Input Offset Voltage (RS ≤ 10kΩ)
Vio Tamb = +25°C 0.7 2 2 7.5 mV
Tmin ≤ Tamb ≤ Tmax 3 10
Input Offset Voltage Drift
DVio
Tmin ≤ Tamb ≤ Tmax µV/°C
3 15 6 30
Input Bias Current - note
Iib Tamb = +25°C 25 75 70 250 nA
Tmin ≤ Tamb ≤ Tmax 100 300
Input Offset Current
Iio Tamb = +25°C 1.5 10 2 50 nA
Tmin ≤ Tamb ≤ Tmax 20 70
Input Offset Current Drift
DIIio Tmin ≤ Tamb ≤ 25°C 10 100 10 300 pA/°C
Tmin ≤ Tamb ≤ Tmax 20 200 20 600
Large Signal Voltage Gain *
VO ≤ 10V, RL = 2kΩ)
Avd V/mV
Tamb = +25°C 50 100 25 100
Tmin ≤ Tamb ≤ Tmax 25 15

Supply Voltage Rejection Ratio (Rs ≤ 10kΩ)

SVR Tamb = +25°C 80 96 70 96 dB
Tmin ≤ Tamb ≤ Tmax 80 70
Supply Current, no load
ICC Tamb = +25°C 1.8 3 1.8 3 mA
Tmin ≤ Tamb ≤ Tmax 3 3
Input Common Mode Voltage Range
(VCC = ±20V)
Vicm V
Tamb = +25°C ±15 ±15
Tmin ≤ Tamb ≤ Tmax ±15 ±15

Common Mode Rejection Ratio (Rs ≤ 10kΩ)

CMR Tamb = +25°C 80 96 70 96 dB
Tmin ≤ Tamb ≤ Tmax 80 70
Output Short-circuit Current *
IOS mA
Tamb = +25°C 10 30 50 10 30 50
Output Voltage Swing *
Tamb = +25°C RL = 10kΩ 12 14 12 14
±VOPP RL = 2kΩ 10 13 10 13 V
Tmin ≤ Tamb ≤ Tmax RL = 10kΩ 12 12
RL = 2kΩ 10 10
Slew Rate (Vi = ±10V, RL = 2kΩ,CL = 100pF,
SR V/µs
unity gain) - 1) 0.25 0.5 0.25 0.5

3/11
LM101A - LM201A - LM301A

LM101A - LM201A LM301A

Symbol Parameter Unit
Min. Typ. Max. Min. Typ. Max.
Rise (Vi = ±20mV, RL = 2kΩ,CL = 100pF, unity
tr µs
gain) 0.3 0.3
Overshoot (Vi = 20mV, RL = 2kΩ,CL = 100pF,
KOV %
unity gain) 5 5
Zi Input Impedance * 1.5 4 1.5 4 MΩ
Gain Bandwidth Product *
GBP (Vi = 10mV, RL = 2kΩ,CL = 100pF, f = 100KHz) MHz
0.5 1 0.5 1
Total Harmonic Distortion
THD (f = 1kHz, Av = 20dB, RL = 2kΩ, Vo = 2Vpp, %
0.015 0.015
CL = 100pF)

Equivalent Input Noise Voltage nV

en ------------
f = 1kHz, Rs = 100Ω 25 25 Hz
1. May be improved up to 10V/µs in inverting amplifier configuration
* ==> VCC = ±15V, T amb = +25°C (unless otherwise specified)

4/11
LM101A - LM201A - LM301A

5/11
LM101A - LM201A - LM301A

SINGLE POLE COMPENSATION FEED FORWARD COMPENSATION

6/11
LM101A - LM201A - LM301A

7/11
LM101A - LM201A - LM301A

8/11
LM101A - LM201A - LM301A

9/11
LM101A - LM201A - LM301A

PACKAGE MECHANICAL DATA

8 PINS - PLASTIC DIP

Millimeters Inches
Dim.
Min. Typ. Max. Min. Typ. Max.
A 3.32 0.131
a1 0.51 0.020
B 1.15 1.65 0.045 0.065
b 0.356 0.55 0.014 0.022
b1 0.204 0.304 0.008 0.012
D 10.92 0.430
E 7.95 9.75 0.313 0.384
e 2.54 0.100
e3 7.62 0.300
e4 7.62 0.300
F 6.6 0260
i 5.08 0.200
L 3.18 3.81 0.125 0.150
Z 1.52 0.060

10/11
 LM101A - LM201A - LM301A

PACKAGE MECHANICAL DATA

8 PINS - PLASTIC MICROPACKAGE (SO)

L
c1

a3
C
a2

b1
b

a1
s

e3 E

D
M

8 5

F
1 4

Millimeters Inches
Dim.
Min. Typ. Max. Min. Typ. Max.
A 1.75 0.069
a1 0.1 0.25 0.004 0.010
a2 1.65 0.065
a3 0.65 0.85 0.026 0.033
b 0.35 0.48 0.014 0.019
b1 0.19 0.25 0.007 0.010
C 0.25 0.5 0.010 0.020
c1 45° (typ.)
D 4.8 5.0 0.189 0.197
E 5.8 6.2 0.228 0.244
e 1.27 0.050
e3 3.81 0.150
F 3.8 4.0 0.150 0.157
L 0.4 1.27 0.016 0.050
M 0.6 0.024
S 8° (max.)
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics

© 2001 STMicroelectronics - Printed in Italy - All Rights Reserved

STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States
© http://www.st.com

11/11