Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

OTH Space Radar - 13К - 2000 Km

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

Radar complex

for measurements
of Space targets
(RC ST)
RC ST radar appearance 2
RC ST radar appearance and target detection 3
Brief description of RC ST 4

The stationary single-band radar complex for space measurements


(RC ST) is designed for control of low-orbit space targets (artificial
Earth satellites). It is container type station working at centimeter band.
RC ST measures coordinates, speed and CRS of detected space
Description targets (ST).
of RC ST
RC ST is designed with high degree of automation of the main
processes of functioning and that allows to provide adaptation to
external environment and technical conditions of hardware and program
complexes of the Radar.

- Automatic detection and tracking of ST according to prior

Mission information on targets;


of RC ST
- Automatic determination of coordinates and CRS;
- Transmission of information on tracking targets to End users;
The specifications of RC ST 5

1 Frequency band Centimeter 10 Mean time failure, h 200


2 Zone of surveillance (control): 11 Mean time recovery, min 30
- On the range, km 120 ÷ 2000 km
- On azimuth, degree ± 10о 12 Mean time of operation a day in
“on-duty” mode, h 8
- On elevation, degrees ± 10о
3 Surveillance Simultaneous within the zone of 13 Maximum time of permanent It is to bee
control (inunterruptable) operation at determined
4 Measuring elements: Operational range, azimuth, high-power output by the time
elevation, angular speed on of one
azimuth, angular speed on (single)
elevation, radial speed, Cross tracking
Radar Section (CRS) 14 Maximum time of operation at
5 Resolution on range (for targets with the high-power output during 4
40
same CRS), m a day, h
6 Resolution on angel (for targets with the 15 Life time, years not less
1
same CRS), beam width, degree than10
7 Parameters of antenna rotation :
16 Operators (Swift personnel) 8
- On azimuth, degree ± 200
- On elevation, degrees 1 ÷ 87 17 Time of deployment ( on the pre-
- In azimuthal plane, degree/sec 0 ÷ ±10 30
prepared site), days
- On azimuthal acceleration, degree/sec² 0 ÷ ±5 18 Environment conditions:
- On elevation speed, degree/sec 0 ÷ ±10 - temperature, о С -40о ÷ +50о
- On elevation acceleration, degree/sec² 0 ÷ ±5 - Relative humidity at a
8 Number of simultaneously tracked temperature of ambient of 98
Up to 15 о
targets +25 С, %
9 Consumption power from primary - Wind velocity, not more than, 25
electric power source, MW m/sec
Up to 1,5 - Altitude above the sea level, 2000
not more than, m
Upgrade possibilities of RC ST 6

RC ST using module design and high-grade of


equipment unification has a great potential for
hardware upgrade. Quite easy could be modernized
or substituted (for more sophisticated) modules of
antenna-feeder device, power amplifiers, also could
be changed number of receiving and data
processing channels, etc.

The use of digital methods of probing signals


formation, formation of receiving and transmitting
antenna patterns, etc. provides possibility to solve
many problems at software level.

As to improvement of certain technical parameters


of RC ST, such as gain in potential, increase in
review speed, increase/decrease in computing
resources, optimization in respect “effectiveness-
cost” of computing center, as well as to shorten
time of deployment of RC ST, all these could be
done within the works for renewal.
Integration possibilities of RC ST 7

RC ST provides electromagnetic compatibility with other external radio-


electronic means due to frequency-territorial spacing. Digital design of the main
parts of the equipment of RC ST provides possibility of it’s integration with
various end-users via standard interfaces in accordance with requirements of the
Customer.

Transmission of data&information is done via


telecommunication channels and interfaces
provided by the Customer. In each case could be
used additional hardware and software.
RC ST equipment is designed using technology of
“high-factory readiness”, what provides it’s
commissioning in the shortest possible time, as well
as transportation of the equipment by automobile,
railroad, airway or sea.
8
Construction features and possibility

RC ST consists of antenna post, antenna-feeder device, transmitting device,


receiving device, unit of reference frequencies and synchronization, computing
complex (CC), adjusting and repair laboratory, means of all-station support and the
functional software. RC ST equipment is accommodated in antenna post’s building
and containers with autonomous cooling and climate control systems.

The Transmitter will provide


amplification of the output signal up
to 75 kW. Depending on the distance
to tracking targets duration of
radiated pulses could vary from 1 ms
up to 1,33 ms.
9
Exploitation performance and time of manufacturing of RC ST

RC ST provides the maximum operating time in “on duty”- mode not more than 8 hours.
The maximum time of continuous operation on high power level during time required for
tacking of one target and total operating time on high power level within a day is not more than 4
hours.
To provide operation of RC ST equipment are supplied spare parts and accessories (ZIP) to
ensure reliable operation during one year period. ZIP is accommodated in specially developed cases
which are installed in containers of devices.
To provide facility for repairing and recovery of the equipment of RC ST during life time, under
the separate contract, the additional ZIP including control-measuring devices, above replacing
elements, could be supplied.
For recovery of RC ST radio-electronic equipment could be used the adjusting and repair
laboratory which is supplied with the equipment.
Time of development and manufacturing of RC ST is not more than 3 years since the date of
signing of the contract.
RC ST radar appearance 10

You might also like