is everywhere! Record - Analyse - Report at a central point by Industry 4.0 with KNET Robotic applications Steel / NiCr / Copper and Aluminum Pulse, Pipe, Pipe Pulse, Deep, Deep Pulse, Double Pulse, Cool, Cool Pulse Pulse and MIG/MAG TIG, FCAW, and MMA welding, gouging Up to 100 program memories Thermal overload protector and error codes Smart Cooling Fan Technology Inteligent Cooling System Fully compatible with electric generators.
Technical Speci ications
Input Voltage (VAC) 400 ± %10 Output Range (MIG, A) 20-600 Duty Cycle (40oC) %60 : 600 A, 41.0 V %100 : 500 A, 36.5 V Max. Input Power (kVA) 32,7 Open Circuit Voltage (VDC) 90 Dimensions (HxWxL, mm) 375 x 314 x 721 Net Weight (kg) 117.5 (W) Standard Accessories 3 m Power Cable (4 x 6 mm2) 3 m Ground Cable (70 mm2) 5 m Extension Package Gas Regulator 3 m 600 A Torch Trolley
http://www.kolarc.com 1 KM 600 W XPULSE Features
All MIG/MAG processes, One welding machine
Superior arc performance!
M 600 W XPULSE is a water cooled inverter gas welding machine which allows the user to make the gas (MIG), coated electrode (MMA) and TIG welding with a single machine with inverter technology. Synergic function allows any additional metal, using the wire diameter and material thickness of the protective gas source programs according to one of the wire speed or welding current value automatically sets all remaining welding parameters is selected. Thanks to the Pulse function, it provides welding without sputtering. Synergic, Pulse and Manual use. Comes with features of Pulse, Pipe, Pipe Pulse, Deep, Deep Pulse, Double Pulse, Cool, Cool Pulse specifications. It is equipped with special programs for Steel / CrNi / Aluminum / Copper weldings. Thanks to its digital display and easy-to-use front panel, it allows the welder to adjust the wire speed, voltage and amperage values. Front gas, hot start, final gas, crater filler and backflush properties improve welding seam appearance and welding performance. 37 mm wire spool, Encoder motor and 4x4 wire feed unit ensure stable and non-spun arc formation. Especially in aluminum wires, wire breaking problem is eliminated Up to 100 program memories can be changed from the trigger. Thus, the pre- recorded programs for horizontal, vertical and ceiling welds can only be set by pressing the torch trigger. With the 2T-4T function, it offers the possibility of welding without pressing the trigger continuously. The LIFT-TIG function prevents tungsten from sticking to the material during arc formation in TIG welding applications. Thanks to the Inverter Technology, it provides up to 35% energy savings and a stable arc characteristic during welding. Thermal overload protector and error codes appearing on the digital display are prevented from being damaged under overload, or in case of interruption of air flow inside the machine. Smart Cooling Fan Technology works only when needed, reducing noise, dusting and energy consumption accumulated in the machine. Fully compatible with electric generators.
