REV 01

SPECIFICATIONS
MODEL NO. S97322-DI101WX

TYPE LCD MODULE, 1280(RGB) * 800 PIXELS

■P r e l i m i n a r y S p e c i f i c a t i o n
□ Final Specification

SUCCESS CUSTOMER
PREPARED CHECKED APPROVED APPROVED

深圳市宇顺电子股份有限公司
SUCCESS ELECTRONICS LTD

“ Not to use the substances and their applications of SUCCESS Management Standard for
Environment-related Substances to be Controlled ”

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:2 /16
RECORDS OF REVISION

REV. DATE Page DESCRIPTION OF CHANGES

01 2014.03.03 FIRST ISSUE

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:3 /16
CONTENT
1. GENERAL SPECIFICATION....................................................................................... 4

2. MECHANICAL DRAWING........................................................................................... 5

3. TFT INTERFACE ASSIGNMENT............................................................................... 6

4. TFT ELECTRICAL SPECIFICATION.........................................................................7

5. OPTICAL CHARACTERISTICS............................................................................... 11

6. RELIABILITY TESTS..................................................................................................15

7. PRECAUTIONS........................................................................................................... 16

8. LIMITED WARRANTY................................................................................................ 16

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:4 /16
1. GENERAL SPECIFICATION

1.1 Description
The S97322-DI101WX is a color active matrix Thin Film Transistor (TFT) Liquid Crystal Display (LCD)
that uses amorphous silicon(a-Si) TFT as a switching device. This model is composed of a single 10.1
inches transmissive type main TFT-LCD panel. The resolution of the panel is 1280x800 pixels and can
display up to 16.7M color.
1.2 Feature
-IPS type for main TFT-LCD panel
-Structure COG+FPC+BL+FRAME
1.3 Application
-Display terminals for cellular phone
1.4 General Specification
No. Item Specification Unit Remark
1 LCD Size 10.1 inch -
2 Panel Type a-Si TFT active matrix - -
3 Resolution 1280 x (RGB) x800 pixel -
4 Display Mode Normally Black,Transmissive - -
5 Display Number of Colors 16.7M - -
6 Viewing Direction All - Note
7 Contrast Ratio 800(Typ) - -
8 Luminance 300(Typ) cd/m2 -
9 Module Size 229.46(W ) x 149.2(L) x 2.4(T) mm Note
10 Active Area 216.96(W) x135.6(L) mm Note
11 Pixel Pitch 0.1695(W ) x 0.1695（L） mm -
12 Weight TBD g -
13 Light Source 30 LEDs White - -
14 Interface LVDS(6bit) - -
15 Operating Temperature -0~50 ℃ -
16 Storage Temperature -20~60 ℃ -

Note: Please refer to the mechanical drawing.

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:5 /16
2. MECHANICAL DRAWING

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:6 /16
3. TFT INTERFACE ASSIGNMENT
PIN NO. SYMBOL FUNCTION DESCRIPTIONS
1 NC No connection
2 VDD Power Voltage for digital circuit
3 VDD Power Voltage for digital circuit
4 NC No connection
5 NC No connection
6 NC No connection
7 NC No connection
8 RXIN0- - LVDS differential data input
9 RXIN0+ + LVDS differential data input
10 GND Ground
11 RXIN1- - LVDS differential data input
12 RXIN1+ + LVDS differential data input
13 GND Ground
14 RXIN2- - LVDS differential data input
15 RXIN2+ + LVDS differential data input
16 GND Ground
17 RXCLKIN- - LVDS differential data input
18 RXCLKIN+ + LVDS differential data input
19 NC No connection
20 NC - LVDS differential data input
21 NC + LVDS differential data input
22 GND Ground
23 NC No connection
24 NC No connection
25 GND Ground
26 NC No connection
27 NC No connection
28 GND Ground
29 NC No connection
30 NC No connection
31 VLED_GND LED Ground
32 VLED_GND LED Ground
33 VLED_GND LED Ground
34 NC No connection
35 PWM PWM Signal for LED dimming control
36 NC No connection
37 NC No connection
38 VLED LED Anode
39 VLED LED Anode
40 VLED LED Anode

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:7 /16
4. TFT ELECTRICAL SPECIFICATION
4.1. TFT ABSOLUTE MAXIMUM RATINGS

STANDARD VALUE
ITEM SYMBOL CONDITION UNIT
MIN TYP MAX
VDD -0.3 - 5.0
Power Supply VLED Ta=25 ºC -0.3 - 5.5 V
VPWM -- Vled
Note: The absolute maximum rating values of this product are not allowed to be exceeded
at any times. Should a module be used with any of the absolute maximum ratings exceeded,
the characteristics of the module may not be recovered, or in an extreme case, the module may
be permanently destroyed.

4.2. TFT TYPICAL OPERATION CONDITION

4.2.1 TFT DC Characteristics
STANDARD VALUE
ITEM SYMBOL CONDITION UNIT
MIN TYP MAX
Power Voltage VDD Ta=25 ºC 3.0 3.3 3.6 V

VDD Power PDD VDD=3.3V - - 1 W

Input logic high voltage VIH IOL=1.0mA 0.7VDD - VDD V

Input logic low voltage VIL - 0 - 0.3VDD Hz

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:8 /16
4.3. BACKLIGHT SPECIFICATION
4.3.1 BACKLIGHT CIRCUIT

4.3.2 ELECTRICAL CHARACTERISTICS (T=25℃)

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:9 /16
4.4.TFT POWER SEQUENCE

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:10 /16
4.5. TFT TIMING CHARACTERISTICS
4.5.1 DC ELECTRICAL CHARACTERISTICS

4.5.2 TIMMING

4.5.3 DATA INPUT FORMAT

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:11 /16
5. OPTICAL CHARACTERISTICS
(Ta=+25ºC, VCC=+2.8V IOVCC=+1.8V, IB=20mA)
Values
Item Symbol Condition Unit Remark
Min. Typ. Max.
Left θL 80 89 -
Viewing Right θR 80 89 -
CR≧10 degree Note 1,2
Angle Range Top ФT 80 89 -
Botto ФB 80 89 -
Normal
Response Time Ton +Toff - 25 35 ms Note 2,3
θ=Ф=0˚
Normal
Contrast Ratio CR 600 800 - - Note 2,4
θ=Ф=0˚
Normal
Luminance L
θ=Ф=0˚
250 300 -- cd/m2 Note 2,5

Color X Normal - - -
White - Note 2,6
Chromaticity Y θ=Ф=0˚ - - -
Luminance Normal
UL 70 75 - % Note 2,7
Uniformity θ=Ф=0˚

Note 1: Definition of viewing angle range

Normal line
θ=Ф=0°

θT 12 o’clock direction
Ф=90°
θB

θL θR

Ф=180° Ф=0°

Active Area

LCD Panel
Ф=270°
6 o’clock direction

Fig. 1 Definition of viewing angle

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:12 /16

Fig. 2 Definition of viewing angle for display

Note 2: Definition of optical measurement system

The optical characteristics should be measured in a dark room with ambient temperature Ta=+25 ℃ . The
optical properties are measured at the center point of the LCD screen after 5 minutes operation. (Equipment:
Photo detector TOPCON BM-5AS Field of view: 1°/Height: 500mm.)

Photo detector

Normal line
θ=Ф=0°

12 o’clock direction
500mm

Ф=180° Ф=0°

Active Area

LCD Panel

Ф=270°
6 o’clock direction

Fig. 3 Optical measurement system setup

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:13 /16
Note 3: Definition of response time
The response time is defined as the LCD optical switching time interval between “White” state and “Black”
state. Rise time (Ton) is the time between photo detector output intensity changed from 90% to 10%, and fall
time (Toff) is the time between photo detector output intensity changed from 10% to 90%.

White (TFT Black (TFT White (TFT

Photo detector output
(Relative value)

100
90%

10%
0%

Ton Toff

Fig. 4 Definition of response time

Note 4: Definition of contrast ratio

Luminance measured when LCD on the " White" state

Contrast ratio (CR) =
Luminance measured when LCD on the " Black" state

Note 5: Definition of luminance

Measured at the center area of the panel when LCD panel is driven at “white” state.
Note 6: Definition of color chromaticity (CIE1931)
Color coordinates measured at the center point of LCD when panel is driven at “White”, “Red”, “Green” and
“Blue” state respectively.

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:14 /16
Note 7: Definition of luminance uniformity
To test for uniformity, the tested area is divided into 3 rows and 3 columns. The measurement spot is placed
at the center of each circle as below.

Lmin
Luminance Uniformity (UL) =
L max
L-------Active area length W----- Active area width
W

L/6
L/3 W/6 W/3 W/3
L

L/3

Fig. 5 Definition of luminance uniformity

Lmin : The measured minimum luminance of all measurement position.

Lmax : The measured maximum luminance of all measurement position.

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:15 /16
6. RELIABILITY TESTS

ITEM CONDITION CRITERION

High Temperature: +50 ºC±3℃, 120 hrs No defects in display and
Operating Temperature Test
Low Temperature: -0 ºC±3℃, 120 hrs operational functions

High Temperature: +60 ºC±3℃, 120 hrs No defects in display and

Storage Temperature Test
Low Temperature: -20 ºC±3℃, 120 hrs operational functions
No defects in display and
Humidity Endurance Test 40 ºC±3℃, 90%±3%RH, 120 hrs
operational functions
-10 ºC (30mins)～ No defects in display and
Thermal Shock Test
+60 ºC (30mins) 50 cycles operational functions
Operating Time: thirty minutes
exposure for each direction (X,Y,Z) No defects in display and
Vibration Resistance Test
Sweep Frequency:10~55Hz (1 min) operational functions
Amplitude: 1.5mm
100G 6ms,±X, ±Y, ±Z 3 times for No defects in display and
Mechanical Shock
each direction operational functions
± 2KV, Human Body Mode, No defects in display and
Electro Static Discharge
100pF/1500Ω operational functions

Life Time 20,000H -

NOTE:
1) The samples must be free from defect before test, must be restored at room condition at least for 2 hours
after reliability test before any inspection.
2) Before test the function of TP, the sample must be placed in room temperature for 24hrs after reliability
test.

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.

 Spec No:S97322-DT101WX
Page:16 /16
7. PRECAUTIONS
7.1. HANDLING
9.1.1. Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the
front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid
damaging the surface.
9.1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.
9.1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.
9.1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.

7.2. STORAGE
9.2.1. Keep in a sealed polyethylene bag.
9.2.2. Keep in a dark place.
9.2.3. Keep in temperature between 0ºC and 35ºC.
NOT allowed at 70ºC for more than 160 Hours, or at -20ºC for more than 48 Hrs.

7.3. SAFETY
If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if
the liquid crystal touch your skin or clothes, please wash it off immediately using soap and
water.

8. LIMITED WARRANTY
Unless otherwise agreed between SUCCESS and customer, SUCCESS will replace or
repair any of its LCD modules which are found to be functionally defective when inspected
in accordance with SUCCESS LCD acceptance standards (copies available upon request)
for a period of one year from date of shipments. Cosmetic/visual defects over specs must
be returned to SUCCESS within 30 days of shipment. Confirmation of such date shall be
based on freight documents. The warranty liability of SUCCESS limited to repair and/or
replacement on the terms set forth above. SUCCESS shall not be responsible for any
subsequent or consequential events.

8.1. RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS

10.1.1. No warranty can be granted if the precautions stated above have been disregarded.
The typical examples of violations are :
- Broken LCD glass.
- Circuit modified in any way, including addition of components.
10.1.2. Module repairs will be invoiced to the customer upon mutual agreement. Modules
must be returned with sufficient description of the failures or defects. Any connectors or
cable installed by the customer must be removed completely without damaging the PCB’s
eyelet, conductors and terminals.

The copyright belongs to SUCCESS. Any unauthorized use is prohibited.