Pump size & type / Stages : 2K4x3-13RV M3 ST /1

Based on curve no. : MIII7503DV

Impeller diameter : 10.69 in

Customer : MINERA YANACOCHA SA Capacity : 686.8 USgpm

Item number : 4760-PO-18-210 Head : 452.76 ft
Service :- Density / Specific gravity : - / 1.060
Flowserve reference : 4889028758 Pump speed : 3,550 rpm
Date : May 23, 2024 Ns / Nss (per eye) : 1,079 / 9,890 (US)
Test tolerance : ANSI/HI 14.6 Grade 1B
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY....

The customer must provide a minimum NPSHa of 15.2 ft.

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.22.1
 Hydraulic Datasheet

Customer : MINERA YANACOCHA SA Pump / Stages : 2K4x3-13RV M3 ST /1

Customer reference : Solicitud de cotización - Bomba MK3... Based on curve no. : MIII7503DV
Item number : 4760-PO-18-210 Flowserve reference : 4889028758
Service :- Date : May 23, 2024
Operating Conditions Materials / Specification
Capacity (rated/normal) : 686.8 USgpm / - Material column code : D4
Water capacity (CQ=1.00) : 686.8 USgpm Pump specification : ASME B73.1
Total developed head : 452.76 ft Other Requirements
Water head (CH=1.00) : 452.76 ft Hydraulic selection : No specification
NPSHa/NPSHa less margin : Ample / - Construction : No specification
Maximum suction pressure : 0.0 psig Test tolerance : ANSI/HI 14.6 Grade 1B
Liquid Driver Sizing : Max Power(MCSF to EOC) using SF
Liquid type : Other Seal configuration : Single Seal
Liquid description :-
Temperature : 60 °F
Density / Specific gravity : - / 1.060
Solid Size - Actual / Limit : - / 0.6880 in
Viscosity / Vapor pressure : 1.00 cSt / -
Performance
Hydraulic power : 83.2 hp Impeller diameter
Pump speed : 3,550 rpm Rated : 10.69 in
Pump overall efficiency (CE=1.00) : 69.5 % Maximum : 11.00 in
NPSH required (NPSH3) : 15.2 ft Minimum : 9.00 in
Rated brake power : 120 hp Ns / Nss (per eye) : 1,079 / 9,890 (US)
Minimum continuous flow : 349.7 USgpm
Maximum brake power : 149 hp Maximum head at rated diameter : 462.87 ft
Driver power rating : 150 hp / 112 kW Flow at BEP : 856.3 USgpm
Casing working pressure : 212.4 psig Flow as % of BEP : 80.2 %
(based on shut off @ cut dia/rated SG) Efficiency at normal flow :-
Maximum allowable : 275.0 psig Impeller diameter ratio (rated/max) : 97.2 %
Hydrostatic test pressure : 413.0 psig Head rise to shut off : 2.2 %
Estimated rated seal chamber pressure : 6.9 psig Total head ratio (rated / max) / (max / rated) : 93.3 % / 107.2 %
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
MCSF PROVIDES MECHANICAL PROTECTION ONLY. MINIMUM THERMAL FLOW MUST BE CALCULATED FOR THE SPECIFIC FLUID AND OPERATING CONDITIONS.

The customer must provide a minimum NPSHa of 15.2 ft.

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.22.1
 Construction Datasheet

Customer : MINERA YANACOCHA SA Pump / Stages : 2K4x3-13RV M3 ST /1

Customer reference : Solicitud de cotización - Bomba MK3... Based on curve no. : MIII7503DV
Item number : 4760-PO-18-210 Flowserve reference : 4889028758
Service :- Date : May 23, 2024
Construction Driver Information
Nozzles Size Rating Face Position Manufacturer : Not Supplied By Flowserve
Suction 4.00 150# FF End Power : 150 hp / 112 kW
Discharge 3.00 150# FF Top Service factor (requested / actual) : 1.15 / 1.15
Casing mounting : Foot Synchronous speed : 3,600 rpm
Casing split : Radial Orientation / Mounting : Horizontal / Foot
Impeller type : Rev Driver type : NEMA
Bearing type (radial) : Sgl Row Frame-size / material : 445TS / CAST IRON
Bearing number (radial) : 6310-C3 Enclosure :-
Bearing type (thrust) : Dbl Row Hazardous area class :-
Bearing number (thrust) : 5310-AHC3 Explosion 'T' rating :-
Bearing lubrication : Flood Volts / Phase / Hz : 460 / 3 / 60 Hz
Rotation (view from driver) : CW per Hyd. Institute Amps-full load/locked rotor :-/-
Materials Motor starting : Direct on line (DOL)
Casing : 316SS (D4/CF8M) Insulation :-
Impeller : 316SS (D4/CF-8M) Temperature rise :-
Seal chamber : FML Box / (316SS) Bearings : Ball
Shaft : ZH/316SS ButtWelded Lubrication : Grease
Sleeve : No Sleeve Motor mounted by : Others
Baseplate, Coupling and Guard Sound Pressure (dBA @ 1.0 m)
Baseplate type : None Driver, expected :-
Baseplate material :- Pump & driver, estimated : 89 Pump only
Baseplate size :- Seal Information
Coupling manufacturer : None Supplied Arrangement : Single Cartridge
Coupling size :- Size : 1.875
Coupling / Shaft guard : No Guard Supplied Manufacturer / Type : Flowserve / ISC2 Pusher
Shaft / seal guard : None Supplied Material code (Man'f/API) : C2CPX----ECXV- / -
Weights (Approx.) Internal neck bushing : Not Available
Bareshaft pump (net) : 281.0 lb Gland
Baseplate (net) :- Gland material : 316SS
Driver (net) : 800.0 lb Flush : .375" NPT
Shipping gross weight/volume : 1,243.1 lb / 7.57 cu.ft Vent : .375" NPT
Testing Drain : .375" NPT
Hydrostatic test : Non witnessed Auxiliary seal device : Carbon Bushing
Performance test : None Piping
NPSH test : None Seal flush plan : Plan 03
Paint and Package Seal flush construction : Not supplied
Pump paint : FLS St'd PU Topcoat Seal flush material : Not supplied
Base grout surface prep : N/A Aux seal flush plan : Plan 61
Shipment type : Export Aux seal flush construction : Not supplied
Aux seal flush material : Not supplied
Notes
-

ANSI 3A w/site, magnetic drain plug

XSD Drawing No. 0000AMK3SXX2KXXFTRVSSMSFM

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.22.1

 Full Page GA Drawing

-
Customer : MINERA YANACOCHA SA Pump size & type : 2K4x3-13RV M3 ST Drawing number :-
Item number : 4760-PO-18-210 Pump speed / Stages : 3,550 rpm / 1 Date : May 23, 2024
Service :- Flow / Head : 686.8 USgpm / 452.76 ft Certified by / Date : :-
Customer PO # :- Driver power / Frame : 150 hp / 112 kW / 445TS Seal type : ISC2 Pusher
Flowserve reference : 4889028758 Volts / Phase / Hz : 460 / 3 / 60 Hz Seal flush plan : Plan 03

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.22.1

 Customer : MINERA YANACOCHA SA Capacity : 686.8 USgpm
Item number : 4760-PO-18-210 Head : 452.76 ft
Service :- Density / Specific gravity : - / 1.060
Flowserve reference : 4889028758 Pump speed : 3,550 rpm
Pump size & type / Stages : 2K4x3-13RV M3 ST /1 Ns / Nss (per eye) : 1,079 / 9,890 (US)
Based on curve no. : MIII7503DV Pump WR² at 3,550 rpm : 1.04 lb-ft²
Impeller diameter : 10.69 in
Date : May 23, 2024
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
MCSF PROVIDES MECHANICAL PROTECTION ONLY. MINIMUM THERMAL FLOW MUST BE CALCULATED FOR THE SPECIFIC FLUID AND OPERATING CONDITIONS.

Copyright © 2016 Flowserve. All rights reserved. Affinity v2.22.1

Pricing Sheet / Scope of Supply
Customer: MINERA YANACOCHA SA Pump / Stages: 2K4x3-13RV M3 ST / 1
Cust / Proj Ref: Solicitud de cotización - Bomba MK3- Based on curve no.: MIII7503DV
Item number: 4760-PO-18-210 FLS # / Reference: 4889028758 / OP-24-441633
Service: Date: May 23, 2024
Qty Description Average Unit Price Extended Price
1 2K4x3-13RV M3 ST FPD - D4 USD 9545 USD 9545
Mark 3 & LoFlo ANSI
- - - - - - - - - - - - - - SCOPE OF SUPPLY - - - - - - - - - - - - - -
Pump - Bare (No Base, Cplg, Mtr, Grd)
Packaging by Chesapeake
Shipping Destination - USA
Safe (non explosive) Atmosphere
Pump - Standard Duty
- - - - - - - - - - - MATERIAL MODIFICATIONS - - - - - - - - - - -
Casing - 316SS (D4/CF8M)
Impeller - 316SS (D4/CF-8M)
• Reverse Vane Design
Cover - 316SS (D4/CF-8M)
Shaft - Standard
• Shaft - ZH Steel w/316SS Butt Weld
Bearing Housing - DCI2
Bearing Housing Adapter - DCI2
Bearing Housing Foot - CI
Cover Gasket - TM
Impeller Gasket - TFR
No Impeller Nut O-Ring Required
Casing Studs - B7TF / Nut - SRTF (Steel-TFE Coated)
Gland Studs - B8C1 / Nut - E8 (18-8)
- - - - - - - - - MECHANICAL MODIFICATIONS - - - - - - - - - -
Casing - Standard
150# Flanges
• 150# FF ANSI Drilling
No Casing Drain (Tap 1)
• No Casing Suction Tap Possible for this Pump Size
• No Discharge Tap
• Plastic Flange Covers
Impeller Balance ISO 1940 G6.3
Power End - ANSI 3A for ASME B73.1
• Bearings - Oil Lubricated
• 1" Sight Gage Only (No Oiler)

Feature quantities match pump quantity unless otherwise noted.

Proposal is valid for 30 days.
Customer: MINERA YANACOCHA SA Pump / Stages: 2K4x3-13RV M3 ST / 1
Cust / Proj Ref: Solicitud de cotización - Bomba MK3- Based on curve no.: MIII7503DV
Item number: 4760-PO-18-210 FLS # / Reference: 4889028758 / OP-24-441633
Service: Date: May 23, 2024
Qty Description Average Unit Price Extended Price
on right side viewed from Coupling
• Oil Seals - Flowserve Bearing Gard BBV
• Brg Hsg - Magnetic Drain Plug
304ss Standard Nameplate
• 304ss Secondary Nameplate (Head, Flow, RPM, Imp Dia)
• with US Customary Units
- - - - - - - - - MECHANICAL SEALS & PACKING - - - - - - - - -
Shaft Sealing Diameter - 1.875"
Flowserve ISC2 Series
• C2C - Standard Elastomer Group C
• PX - Single Stationary Pusher
• E - 316/316L St.St. (5---)
• CX - Resin Carbon vs SilCar (-Z-T)
• V - Fluoroelastomer (FKM) - (--4-)
• B - Large Bore Gland
• Flush, Quench & Drain NPT Ports w/Fixed Carbon Bush
Seal Chamber - FML (Large Bore Taper design + Flow Modifiers)
- - - - - - - - - - - SEALING FLUSH SYSTEMS - - - - - - - - - - -
Plan 03 (Internal circulation created by Taper Bore seal chamber)
Plan 61 (Plugged Quench & Drain Connection for Purchaser Use)
- - - - - - - - - - - - - - - - - COUPLINGS - - - - - - - - - - - - - - - - -
No Coupling Provided
• 3.5" Spacer Required
- - - - - - - - - - - - - - - - - - GUARDS - - - - - - - - - - - - - - - - - -
No Coupling Guard Supplied
- - - - - - - - - - - - - - - - - BASEPLATE - - - - - - - - - - - - - - - -
No Baseplate Supplied
- - - INSTRUMENTATION / CONDITION MONITORING - - -
- - - - - - - - - - - - - QUALITY ASSURANCE - - - - - - - - - - - -
No 2.1 Certificate of Compliance
No 2.2 Cert of Compliance
No 3.1 CMTRs
No Customer Inspection
- - - - - - - - - - - - HYDROSTATIC TESTING - - - - - - - - - - - -
10 Min Non-Wit Hydro Test-Csg & Cvr Only
- - - - - - - - - - - - PERFORMANCE TESTING - - - - - - - - - - -
- - - - - - - PAINTING & SURFACE PREPARATIONS - - - - - -
Pump Coating System 1 - Manufacturer's St'd Polyurethane Top Coat
• Color - Quartz Grey (RAL 7039)
- - - - - - - - - - - - COMMERCIAL OPTIONS- - - - - - - - - - - -
• Warranty – 12 Months Start-Up / 18 Months Shipment
- - - - - - - - - - - - - - DOCUMENTATION - - - - - - - - - - - - - -
Installation and Operations Manual

Feature quantities match pump quantity unless otherwise noted.

Proposal is valid for 30 days.
Customer: MINERA YANACOCHA SA Pump / Stages: 2K4x3-13RV M3 ST / 1
Cust / Proj Ref: Solicitud de cotización - Bomba MK3- Based on curve no.: MIII7503DV
Item number: 4760-PO-18-210 FLS # / Reference: 4889028758 / OP-24-441633
Service: Date: May 23, 2024
Qty Description Average Unit Price Extended Price
• English - Language
No Submittal Package Required
- - - - - - - - - - - - - - - - - PACKAGING - - - - - - - - - - - - - - - -
• Packaging - Export Box (6 Months)
- - - - - - - - - - - - INCO & FREIGHT TERMS - - - - - - - - - - -
EXW - Ex-Works Chesapeake
- - - - - - - - - - - - - - - - SPARE PARTS - - - - - - - - - - - - - - -
No Spare Parts

1 Driver
- - - - - - - - - - - - - - - - - - MOTORS - - - - - - - - - - - - - - - - - -
Driver Supplied by Others
• NEMA Foot Mt'd Motor
• NEMA Motor (150 hp 3600 RPM 445TS)
Bare Pump -Less Driver, Base, & Coupling

Customer Comments TOTAL USD 9545 USD 9545

Shipment (after receipt of order and full release to manufacture) is 12 working weeks.

Feature quantities match pump quantity unless otherwise noted.

Proposal is valid for 30 days.