E2013092544EN OmniSwitch 6855 EN Datasheet
E2013092544EN OmniSwitch 6855 EN Datasheet
E2013092544EN OmniSwitch 6855 EN Datasheet
OmniSwitch 6855
HARDENED LAN SWITCH
Alcatel-Lucent OmniSwitch™ 6855 Hardened LAN Switch (HLS) models are industrial grade,
managed, Gigabit and 10 Gigabit Ethernet switches designed to operate reliably in harsh
electrical environments and severe temperatures.
This superior, rugged hardware design, The target applications for these versatile
coupled with the widely deployed and LAN switches are power utilities, trans-
field-proven Alcatel-Lucent Operating portation and traffic control systems,
System (AOS), makes the OmniSwitch 6855 industrial factory floor installations,
ideal for industrial and mission-critical video surveillance systems and outdoor
applications that require wider operating installations, all of which require gigabit
temperature ranges, more stringent EMC/ backbone connectivity.
EMI requirements and an optimized
feature set for high security, reliability,
performance and easy management.
FeAtuReS BeneFitS
Ruggedized hardware design Operates at a wider temperature range from -40°C to +75°C, with-
stands greater shock, vibrations, temperature and EMI/EMC tests
Convection cooling for fanless models or temperature triggered Increased reliability, and lower acoustic levels
fans for 24 port models
Power over Ethernet (PoE) support on all copper models Enables converged applications by providing power to IP phones,
surveillance cameras, and wireless access points
Redundancy at all levels including power supplies, software A field-upgradeable solution that makes the network highly available
and hot-swappable. Small Form Factor Pluggable (SFP) modules and reduces operating expenses
Wire-rate switching and routing at gigabit speeds. Advanced Outstanding performance when supporting real-time voice, data, and
services incorporated in the operating system (OS): quality of video applications for converged scalable networks
service (QoS), access control lists (ACLs), L2/L3, VLAN stacking,
and IPv6
Extensive security features for network access control (NAC), Fully secures the network at the edge, at no additional cost
policy enforcement and attack containment
Hardware-based virtual routing and forwarding (VRF) support on Enterprise-wide cost reduction through hardware consolidation
OmniSwitch 6855-U24X to achieve network segmentation and security without additional
hardware installation
Advanced, out-of-the-box auto- configuration, Link Layer Automated switch setup and configuration, and end-to-end VLAN
Discovery Protocol (LLDP) network policies and dynamic VLAN provisioning support cost-effective installation and deployment
allocation
Ready for Metro Ethernet access: VLAN stacking, multicast switch- Simplifies Metro Ethernet network OA&M for service providers
ing, Dynamic Host Configuration Protocol (DHCP) snooping/ option
82, ITU-T Y.1731, IEEE 802.1ag, IEEE 802.3ah and MAC-Forced
Forwarding (MEF 9/14 compliant)
FeAtuReS BeneFitS
Enhanced Unified Access features for converged campus network Unified Access and Application fluent Networks provide resilient
solutions architecture with automated controls, enhanced security and simpli-
• SIP Fluency to provision & monitor QOS treatment of SIP flows fied management for both wired and wireless users resulting in
• Airgroup™ Network Services for Bonjour speaking devices reduced operational complexity & lesser cost.
• Integrated Policy with User Network Profile User Network Profiles add intelligence to the network to automatically
• Citrix VDI fluency enables differentiated services for VDI flows adapt as users move around the enterprise network.
Integration of services enable employees to access same applica-
tions and service across wired and wireless access and thus gives a
consistent, seamless user experience.
Enables deployment of advanced , secure BYOD services OS6855 offers flexible deployment options for BYOD services which
in enterprise networks*: does not require a forklift upgrade and protects customer investment.
• Advanced zero-touch guest management capabilities Automatic on-boarding and 802.1x provisioning of user devices helps
• Device on-boarding and automated 802.1x provisioning in IT operation simplification and increased wired LAN security.
• Device posture/health check, and fingerprinting,
Provides improved control and security over corporate data/applica-
• Application management
tions for mixed personal and corporate environment.
* Requires ClearPass
OmniSwitch 6855 models • Two 10 Gigabit Ethernet SFP+ ports for • 12 10/100/1000 RJ-45 copper ports
stacking or uplinks • 12 PoE-capable ports
The OmniSwitch 6855 family offers
customers an extensive selection of Gigabit • 22 SFP ports • Two SFP ports
and 10 Gigabit Ethernet fixed-configura- • Two combo ports • Fanless design
tion switches and power supply options • Up to four units in a stack
that accommodate most needs. Models
offered include industrial-strength PoE
and non-PoE models in a IU form factor.
Combo ports are ports individually There is no interruption of service when unit. A power shelf provided with the unit
configurable to be 10/100/1000 Base-T or a new power supply is installed or an old can slide into the rear of the switch and is
1000Base-X, which spuport SFP transceiv- one replaced. used to hold two power supplies.
ers for short, long and very long distances.
Power supplies for OmniSwitch Any power supply can be remotely
Gigabit fiber interfaces on the OmniSwitch 6855-14, OmniSwitch 6855-P14 connected using a cable, which enables
6855-U10 and OmniSwitch 6855-U24X and OmniSwitch 6855-u10 rack mounting using the mounting ears
models support Gigabit SFP or 100Base-X The power supplies for the half rack mod- provided with the unit. This feature allows
SFP optical transceivers. See the full list of els come in the form of a power brick in for space-sensitive installations requiring
supported transceivers at the end of the either AC or DC variant. A separate power reduced depth (for example, in a wall-
data sheet. brick provides PoE power and is available mounted cabinet).
for purchase when PoE is required.
Power supplies Indicators
OmniSwitch 6855 models support redun- Power supplies for • Per-port LEDs: link/activity/PoE
dant, hot-swappable AC, DC or PoE power OmniSwitch 6855-24 and • System LEDs: OK (switch HW/SW status)
supplies. The primary and the backup OmniSwitch 6855-U24X • PS1/PS2: primary and/or redundant power
power supply units are external, allowing The primary and the backup power supply status
for easier maintenance and replacement. supplies for the 24 port models are • 7-segment LED on OS6855-U24X
modular and connect to the rear of the indicating the operational mode
and stack number
iSFP-GIG-SX 1000Base-SX industrial transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an
LC connector. Typical reach of 300 m.
iSFP-GIG-T 1000Base-T Gigabit industrial Ethernet Transceiver (SFP MSA). Supports category 5, 5E, and 6 copper cabling up
to 100 m. SFP supports 10/100/1000 Mb/s and full-duplex mode.
iSFP-GIG-BX-U 1000Base-BX SFP transceiver with an LC type interface. Supports single-mode fiber on a single strand link up to
10 km. Transmits 1310 nm and receives 1490 nm optical signal.
iSFP-GIG-BX-D 1000Base-BX SFP transceiver with an LC type interface. Supports single-mode fiber on a single strand link up to
10 km. Transmits 1490 nm and receives 1310 nm optical signal.
iSFP-100-MM 100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over multimode fiber.
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented
is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2013 Alcatel-Lucent. All rights reserved. E2013092544EN (November)